dmesg - 171
Linux version 4.14.11-300.fc27.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 7.2.1 20170915 (Red Hat 7.2.1-2) (GCC)) #1 SMP Wed Jan 3 13:52:28 UTC 2018
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] reserved
BIOS-e820: [mem 0x0000000000090000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf49cfff] usable
BIOS-e820: [mem 0x00000000cf49d000-0x00000000cf4befff] reserved
BIOS-e820: [mem 0x00000000cf4bf000-0x00000000cf665fff] usable
BIOS-e820: [mem 0x00000000cf666000-0x00000000cf7befff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7bf000-0x00000000cf7dafff] usable
BIOS-e820: [mem 0x00000000cf7db000-0x00000000cf7fefff] ACPI data
BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000cf800000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fcffffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000062fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.5 present.
DMI: /DX58SO, BIOS SOX5810J.86A.5600.2013.0729.2250 07/29/2013
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x630000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FF0000000 write-back
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 400000000 mask E00000000 write-back
6 base 600000000 mask FE0000000 write-back
7 base 620000000 mask FF0000000 write-back
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
Base memory trampoline at [ffffa03b80098000] 98000 size 24576
BRK [0x1b6a54000, 0x1b6a54fff] PGTABLE
BRK [0x1b6a55000, 0x1b6a55fff] PGTABLE
BRK [0x1b6a56000, 0x1b6a56fff] PGTABLE
BRK [0x1b6a57000, 0x1b6a57fff] PGTABLE
BRK [0x1b6a58000, 0x1b6a58fff] PGTABLE
BRK [0x1b6a59000, 0x1b6a59fff] PGTABLE
BRK [0x1b6a5a000, 0x1b6a5afff] PGTABLE
BRK [0x1b6a5b000, 0x1b6a5bfff] PGTABLE
BRK [0x1b6a5c000, 0x1b6a5cfff] PGTABLE
BRK [0x1b6a5d000, 0x1b6a5dfff] PGTABLE
RAMDISK: [mem 0x35879000-0x36c34fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 INTEL )
ACPI: XSDT 0x00000000CF7FE120 000074 (v01 INTEL DX58SO 000015E0 01000013)
ACPI: FACP 0x00000000CF7FD000 0000F4 (v03 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20170728/tbfadt-603)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Address but zero Length: 0x0000000000000450/0x0 (20170728/tbfadt-658)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20170728/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20170728/tbfadt-708)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20170728/tbfadt-708)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20170728/tbfadt-708)
ACPI: DSDT 0x00000000CF7F8000 004622 (v02 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: FACS 0x00000000CF728000 000040
ACPI: FACS 0x00000000CF728000 000040
ACPI: APIC 0x00000000CF7F7000 000138 (v02 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: WDDT 0x00000000CF7F6000 000040 (v01 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: MCFG 0x00000000CF7F5000 00003C (v01 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: ASF! 0x00000000CF7F4000 0000AC (v32 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: HPET 0x00000000CF7F3000 000038 (v01 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: SSDT 0x00000000CF7DE000 012A04 (v01 INTEL SSDT PM 000015E0 MSFT 0100000D)
ACPI: DMAR 0x00000000CF7DB000 000180 (v01 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: WDTT 0x00000000CF7F1000 00020C (v02 INTEL DX58SO 000015E0 MSFT 0100000D)
ACPI: ASPT 0x00000000CF7F2000 000034 (v04 INTEL PerfTune 000015E0 MSFT 0100000D)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000062fffffff]
NODE_DATA(0) allocated [mem 0x62ffc1000-0x62ffebfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000062fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000008efff]
node 0: [mem 0x0000000000090000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000cf49cfff]
node 0: [mem 0x00000000cf4bf000-0x00000000cf665fff]
node 0: [mem 0x00000000cf7bf000-0x00000000cf7dafff]
node 0: [mem 0x00000000cf7ff000-0x00000000cf7fffff]
node 0: [mem 0x0000000100000000-0x000000062fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000062fffffff]
On node 0 totalpages: 6288893
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13210 pages used for memmap
DMA32 zone: 845409 pages, LIFO batch:31
Normal zone: 84992 pages used for memmap
Normal zone: 5439488 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf49d000-0xcf4befff]
PM: Registered nosave memory: [mem 0xcf666000-0xcf7befff]
PM: Registered nosave memory: [mem 0xcf7db000-0xcf7fefff]
PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xd0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 44 pages/cpu @ffffa04197200000 s142040 r8192 d29992 u262144
pcpu-alloc: s142040 r8192 d29992 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists, mobility grouping on. Total pages: 6190606
Policy zone: Normal
audit: disabled (until reboot)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 24645916K/25155572K available (12300K kernel code, 1545K rwdata, 3724K rodata, 2084K init, 1364K bss, 509656K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 35484 entries in 139 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 65792, nr_irqs: 552, preallocated irqs: 16
Offload RCU callbacks from CPUs: .
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3424.588 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6849.17 BogoMIPS (lpj=3424588)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 4
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz (family: 0x6, model: 0x1a, stepping: 0x4)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54793.40 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcf666000-0xcf7befff] (1413120 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 17:54:30, date: 01/11/18
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 12 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3d])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [bus 00-3d]
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: enabling Extended Tags
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:19.0: [8086:10cc] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xd3200000-0xd321ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xd3222000-0xd3222fff]
pci 0000:00:19.0: reg 0x18: [io 0x30e0-0x30ff]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x30c0-0x30df]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x30a0-0x30bf]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x3080-0x309f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xd3221000-0xd32213ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0000000-0xf0003fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x3020-0x303f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xd3220000-0xd32203ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0810 (mask 007f)
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0x3158-0x315f]
pci 0000:00:1f.2: reg 0x14: [io 0x316c-0x316f]
pci 0000:00:1f.2: reg 0x18: [io 0x3150-0x3157]
pci 0000:00:1f.2: reg 0x1c: [io 0x3168-0x316b]
pci 0000:00:1f.2: reg 0x20: [io 0x3130-0x313f]
pci 0000:00:1f.2: reg 0x24: [io 0x3120-0x312f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf0004000-0xf00040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x3148-0x314f]
pci 0000:00:1f.5: reg 0x14: [io 0x3164-0x3167]
pci 0000:00:1f.5: reg 0x18: [io 0x3140-0x3147]
pci 0000:00:1f.5: reg 0x1c: [io 0x3160-0x3163]
pci 0000:00:1f.5: reg 0x20: [io 0x3110-0x311f]
pci 0000:00:1f.5: reg 0x24: [io 0x3100-0x310f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:0640] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
pci 0000:03:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:03:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xd2ffffff]
pci 0000:00:07.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:06:00.0: [11ab:6121] type 00 class 0x01018f
pci 0000:06:00.0: reg 0x10: [io 0x1018-0x101f]
pci 0000:06:00.0: reg 0x14: [io 0x1024-0x1027]
pci 0000:06:00.0: reg 0x18: [io 0x1010-0x1017]
pci 0000:06:00.0: reg 0x1c: [io 0x1020-0x1023]
pci 0000:06:00.0: reg 0x20: [io 0x1000-0x100f]
pci 0000:06:00.0: reg 0x24: [mem 0xd3100000-0xd31003ff]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:07:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:07:03.0: reg 0x10: [mem 0xd3004000-0xd30047ff]
pci 0000:07:03.0: reg 0x14: [mem 0xd3000000-0xd3003fff]
pci 0000:07:03.0: supports D1 D2
pci 0000:07:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000cbfff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfedfffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xf7ffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:3f:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:3f:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:3f:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:3f:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:3f:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:3f:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:3f:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:3f:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:3f:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:3f:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:3f:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:3f:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:3f:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:3f:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:3f:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf49d000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf666000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf7db000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0680-0x06ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: BAR 6: no space for [mem size 0x00080000 pref]
pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00080000 pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:07.0: bridge window [mem 0xd0000000-0xd2ffffff]
pci 0000:00:07.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.1: PCI bridge to [bus 05]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.4: bridge window [mem 0xd3100000-0xd31fffff]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [mem 0xd3000000-0xd30fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000cbfff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfedfffff window]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xd0000000-0xd2ffffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xd3100000-0xd31fffff]
pci_bus 0000:07: resource 1 [mem 0xd3000000-0xd30fffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x000c4000-0x000cbfff window]
pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfedfffff window]
pci_bus 0000:07: resource 9 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20208K
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fe711000 flags: 0x0
DMAR: dmar0: reg_base_addr fe711000 ver 1:0 cap c9008010e60262 ecap f0207a
DMAR: DRHD base: 0x000000fe710000 flags: 0x1
DMAR: dmar1: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f0207a
DMAR: RMRR base: 0x000000cf4ad000 end: 0x000000cf4adfff
DMAR: RMRR base: 0x000000cf4ae000 end: 0x000000cf4aefff
DMAR: RMRR base: 0x000000cf4b0000 end: 0x000000cf4b0fff
DMAR: RMRR base: 0x000000cf4a4000 end: 0x000000cf4a4fff
DMAR: RMRR base: 0x000000cf4a6000 end: 0x000000cf4a6fff
DMAR: RMRR base: 0x000000cf4a7000 end: 0x000000cf4a7fff
DMAR: RMRR base: 0x000000cf4aa000 end: 0x000000cf4aafff
DMAR: RMRR base: 0x000000cf4a1000 end: 0x000000cf4a1fff
DMAR: RMRR base: 0x000000000ec000 end: 0x000000000eefff
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb49d000-0xcf49d000] (64MB) mapped at [ffffa03c4b49d000-ffffa03c4f49cfff]
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.0: Signaling PME with IRQ 24
pcieport 0000:00:03.0: Signaling PME with IRQ 25
pcieport 0000:00:07.0: Signaling PME with IRQ 26
pcieport 0000:00:1c.0: Signaling PME with IRQ 27
pcieport 0000:00:1c.1: Signaling PME with IRQ 28
pcieport 0000:00:1c.4: Signaling PME with IRQ 29
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:06:00.0: version 3.0
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x3158 ctl 0x316c bmdma 0x3130 irq 19
ata2: SATA max UDMA/133 cmd 0x3150 ctl 0x3168 bmdma 0x3138 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x3148 ctl 0x3164 bmdma 0x3110 irq 18
ata4: SATA max UDMA/133 cmd 0x3140 ctl 0x3160 bmdma 0x3118 irq 18
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xd3221000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.11-300.fc27.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xd3220000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.11-300.fc27.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.11-300.fc27.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.11-300.fc27.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00003080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.14.11-300.fc27.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.14.11-300.fc27.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.14.11-300.fc27.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.14.11-300.fc27.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x106a4, pf=0x2, revision=0x12
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (565036235, 0)->(676224818, -111188583)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: a04b55b15c4372646f782c962d4a11665b6d0cb6'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 2:489:946
cpuid cpu1: hash matches
tty tty3: hash matches
processor cpu1: hash matches
rtc_cmos 00:00: setting system clock to 2018-01-11 17:54:30 UTC (1515693270)
ata3: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link down (SStatus 0 SControl 300)
usb 8-2: new low-speed USB device number 2 using uhci_hcd
usb 1-1: New USB device found, idVendor=046d, idProduct=082b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: Webcam C170
usb 1-1: Manufacturer:
usb 8-2: New USB device found, idVendor=045e, idProduct=00db
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-2: Product: Natural® Ergonomic Keyboard 4000
usb 8-2: Manufacturer: Microsoft
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
ata1.00: ATA-9: WDC WD10EFRX-68FYTN0, 82.00A82, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: ATA-8: TS64GSSD25S-M, V0826, max UDMA/100
ata1.01: 125206528 sectors, multi 0: LBA
ata1.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD10EFRX-68F 0A82 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 0:0:1:0: Direct-Access ATA TS64GSSD25S-M 6 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] 125206528 512-byte logical blocks: (64.1 GB/59.7 GiB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sr 1:0:1:0: Attached scsi generic sg2 type 5
tsc: Refined TSC clocksource calibration: 3424.432 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x315c76a71bf, max_idle_ns: 440795329629 ns
usb 4-2: new full-speed USB device number 2 using uhci_hcd
sda: sda1
sdb: sdb1 sdb2 sdb3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 2084K
Write protecting the kernel read-only data: 18432k
Freeing unused kernel memory: 2012K
Freeing unused kernel memory: 372K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Local File Systems.
usb 4-2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Receiver
usb 4-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0005: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input2
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
scsi host4: pata_marvell
scsi host5: pata_marvell
ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 16
ata6: PATA max UDMA/133 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 16
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/0003:045E:00DB.0001/input/input2
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
microsoft 0003:045E:00DB.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-2/input0
input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/0003:045E:00DB.0002/input/input3
firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
input: Logitech M510 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/0003:046D:1025.0006/input/input4
microsoft 0003:045E:00DB.0002: input,hidraw2: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:1d.2-2/input1
logitech-hidpp-device 0003:046D:1025.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:1a.1-2:1
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:94:6e:58
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
firewire_core 0000:07:03.0: created device fw0: GUID 00902700023bbdb8, S400
usb 5-1: new full-speed USB device number 2 using uhci_hcd
clocksource: Switched to clocksource tsc
usb 5-1: New USB device found, idVendor=2341, idProduct=0043
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=220
usb 5-1: Manufacturer: Arduino (www.arduino.cc)
usb 5-1: SerialNumber: 75232303235351016202
usb 5-2: new low-speed USB device number 3 using uhci_hcd
usb 5-2: New USB device found, idVendor=046d, idProduct=c50e
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: USB RECEIVER
usb 5-2: Manufacturer: Logitech
input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C50E.0007/input/input5
hid-generic 0003:046D:C50E.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.2-2/input0
random: crng init done
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[200]: Received SIGTERM from PID 1 (systemd).
systemd: 24 output lines suppressed due to ratelimiting
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
EXT4-fs (sdb2): re-mounted. Opts: (null)
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3424432231 Hz
vboxdrv: Successfully loaded version 5.1.30 (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
systemd-journald[458]: Received request to flush runtime journal from PID 1
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
EDAC i7core: Driver loaded, 1 memory controller(s) found.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
cdc_acm 5-1:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
media: Linux media interface: v0.10
gpio_ich: GPIO from 451 to 511 on gpio_ich
Linux video capture interface: v2.00
Adding 17034236k swap on /dev/sdb3. Priority:-2 extents:1 across:17034236k FS
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
uvcvideo: Found UVC 1.00 device Webcam C170 (046d:082b)
uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1:1.0: Entity type for entity Extension 6 was not initialized!
uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
input: Webcam C170: Webcam C170 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver snd-usb-audio
snd_hda_codec_realtek hdaudioC0D2: ALC889: SKU not ready 0x411111f0
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC889: line_outs=3 (0x14/0x19/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x1b
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:03:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017
SGI XFS with ACLs, security attributes, no debug enabled
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
XFS (sda1): Mounting V5 Filesystem
XFS (sda1): Ending clean mount
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
adt7475 0-002e: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
adt7475 0-002e: ADT7490 device, revision 2
adt7475 0-002e: Optional features: in0 in4 fan4 pwm2
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller _nv000788rm+0x165/0x1b0 [nvidia] mapping multiple BARs
Ebtables v2.0 registered
fuse init (API version 7.26)
usb 1-1: reset high-speed USB device number 2 using ehci-pci
rfkill: input handler disabled
logitech-hidpp-device 0003:046D:1025.0006: HID++ 1.0 device connected.
perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000