dmesg - BtrFS-NONE
Linux version 4.14.8-1-ARCH (builduser@heftig-11417) (gcc version 7.2.1 20171128 (GCC)) #1 SMP PREEMPT Wed Dec 20 21:27:44 UTC 2017
Command line: initrd=\initramfs-linux.img root=LABEL=ROOT rw intel_iommu=on
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000005abbdfff] usable
BIOS-e820: [mem 0x000000005abbe000-0x000000005b91bfff] reserved
BIOS-e820: [mem 0x000000005b91c000-0x000000005bb95fff] usable
BIOS-e820: [mem 0x000000005bb96000-0x000000005c75efff] ACPI NVS
BIOS-e820: [mem 0x000000005c75f000-0x000000005cfaafff] reserved
BIOS-e820: [mem 0x000000005cfab000-0x000000005cfabfff] usable
BIOS-e820: [mem 0x000000005cfac000-0x000000005d031fff] reserved
BIOS-e820: [mem 0x000000005d032000-0x000000005d287fff] usable
BIOS-e820: [mem 0x000000005d288000-0x000000005dff8fff] reserved
BIOS-e820: [mem 0x000000005dff9000-0x000000005dffffff] usable
BIOS-e820: [mem 0x000000005e000000-0x000000005effffff] reserved
BIOS-e820: [mem 0x0000000060000000-0x000000006fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000189fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x515a6018-0x515b6057] usable ==> usable
e820: update [mem 0x515a6018-0x515b6057] usable ==> usable
e820: update [mem 0x51595018-0x515a5057] usable ==> usable
e820: update [mem 0x51595018-0x515a5057] usable ==> usable
e820: update [mem 0x51575018-0x51594457] usable ==> usable
e820: update [mem 0x51575018-0x51594457] usable ==> usable
e820: update [mem 0x51564018-0x51574857] usable ==> usable
e820: update [mem 0x51564018-0x51574857] usable ==> usable
e820: update [mem 0x51557018-0x51563057] usable ==> usable
e820: update [mem 0x51557018-0x51563057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x0000000000100000-0x0000000051557017] usable
reserve setup_data: [mem 0x0000000051557018-0x0000000051563057] usable
reserve setup_data: [mem 0x0000000051563058-0x0000000051564017] usable
reserve setup_data: [mem 0x0000000051564018-0x0000000051574857] usable
reserve setup_data: [mem 0x0000000051574858-0x0000000051575017] usable
reserve setup_data: [mem 0x0000000051575018-0x0000000051594457] usable
reserve setup_data: [mem 0x0000000051594458-0x0000000051595017] usable
reserve setup_data: [mem 0x0000000051595018-0x00000000515a5057] usable
reserve setup_data: [mem 0x00000000515a5058-0x00000000515a6017] usable
reserve setup_data: [mem 0x00000000515a6018-0x00000000515b6057] usable
reserve setup_data: [mem 0x00000000515b6058-0x000000005abbdfff] usable
reserve setup_data: [mem 0x000000005abbe000-0x000000005b91bfff] reserved
reserve setup_data: [mem 0x000000005b91c000-0x000000005bb95fff] usable
reserve setup_data: [mem 0x000000005bb96000-0x000000005c75efff] ACPI NVS
reserve setup_data: [mem 0x000000005c75f000-0x000000005cfaafff] reserved
reserve setup_data: [mem 0x000000005cfab000-0x000000005cfabfff] usable
reserve setup_data: [mem 0x000000005cfac000-0x000000005d031fff] reserved
reserve setup_data: [mem 0x000000005d032000-0x000000005d287fff] usable
reserve setup_data: [mem 0x000000005d288000-0x000000005dff8fff] reserved
reserve setup_data: [mem 0x000000005dff9000-0x000000005dffffff] usable
reserve setup_data: [mem 0x000000005e000000-0x000000005effffff] reserved
reserve setup_data: [mem 0x0000000060000000-0x000000006fffffff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000189fffffff] usable
efi: EFI v2.40 by American Megatrends
efi: ACPI=0x5bf9e000 ACPI 2.0=0x5bf9e000 SMBIOS=0xf05b0 MPS=0xfd150
random: fast init done
SMBIOS 2.8 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./X99X Killer, BIOS P3.10 07/01/2016
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x18a0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000060000000 mask 3FFFE0000000 uncachable
2 base 010000000000 mask 3FC000000000 uncachable
3 base 00005F000000 mask 3FFFFF000000 uncachable
4 base 0000B0000000 mask 3FFFF0000000 write-through
5 base 0000C0000000 mask 3FFFE0000000 write-through
6 base 0000E0000000 mask 3FFFF0000000 write-through
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: last_pfn = 0x5e000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd450-0x000fd45f] mapped at [ffffffffff240450]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9b4680098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x75f213000, 0x75f213fff] PGTABLE
BRK [0x75f214000, 0x75f214fff] PGTABLE
BRK [0x75f215000, 0x75f215fff] PGTABLE
BRK [0x75f216000, 0x75f216fff] PGTABLE
BRK [0x75f217000, 0x75f217fff] PGTABLE
BRK [0x75f218000, 0x75f218fff] PGTABLE
BRK [0x75f219000, 0x75f219fff] PGTABLE
BRK [0x75f21a000, 0x75f21afff] PGTABLE
BRK [0x75f21b000, 0x75f21bfff] PGTABLE
BRK [0x75f21c000, 0x75f21cfff] PGTABLE
BRK [0x75f21d000, 0x75f21dfff] PGTABLE
BRK [0x75f21e000, 0x75f21efff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x515b7000-0x51c95fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000005BF9E000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000005BF9E098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000005BFC8300 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000005BF9E1E8 02A112 (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000005C75DF80 000040
ACPI: APIC 0x000000005BFC8410 0000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000005BFC84D8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000005BFC8520 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000005BFC85C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000005BFC8600 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: UEFI 0x000000005BFC8970 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0x000000005BFC89B8 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000005BFC89E8 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000005BFC8A20 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SLIT 0x000000005BFC8AB0 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000005BFC8AE0 001158 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000005BFC9C38 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000005BFC9C78 015E8E (v02 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: AAFT 0x000000005BFDFB08 0002EF (v01 ALASKA OEMAAFT 01072009 MSFT 00000097)
ACPI: BGRT 0x000000005BFDFDF8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: DMAR 0x000000005BFDFE30 0000DC (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x000000005BFDFF10 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x5fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x189fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x5fffffff] + [mem 0x100000000-0x189fffffff] -> [mem 0x00000000-0x189fffffff]
NODE_DATA(0) allocated [mem 0x189fffa000-0x189fffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000189fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x000000005abbdfff]
node 0: [mem 0x000000005b91c000-0x000000005bb95fff]
node 0: [mem 0x000000005cfab000-0x000000005cfabfff]
node 0: [mem 0x000000005d032000-0x000000005d287fff]
node 0: [mem 0x000000005dff9000-0x000000005dffffff]
node 0: [mem 0x0000000100000000-0x000000189fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000189fffffff]
On node 0 totalpages: 25145397
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 5763 pages used for memmap
DMA32 zone: 368790 pages, LIFO batch:31
Normal zone: 387072 pages used for memmap
Normal zone: 24772608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
[Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x3a (or later)
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x51557000-0x51557fff]
PM: Registered nosave memory: [mem 0x51563000-0x51563fff]
PM: Registered nosave memory: [mem 0x51564000-0x51564fff]
PM: Registered nosave memory: [mem 0x51574000-0x51574fff]
PM: Registered nosave memory: [mem 0x51575000-0x51575fff]
PM: Registered nosave memory: [mem 0x51594000-0x51594fff]
PM: Registered nosave memory: [mem 0x51595000-0x51595fff]
PM: Registered nosave memory: [mem 0x515a5000-0x515a5fff]
PM: Registered nosave memory: [mem 0x515a6000-0x515a6fff]
PM: Registered nosave memory: [mem 0x515b6000-0x515b6fff]
PM: Registered nosave memory: [mem 0x5abbe000-0x5b91bfff]
PM: Registered nosave memory: [mem 0x5bb96000-0x5c75efff]
PM: Registered nosave memory: [mem 0x5c75f000-0x5cfaafff]
PM: Registered nosave memory: [mem 0x5cfac000-0x5d031fff]
PM: Registered nosave memory: [mem 0x5d288000-0x5dff8fff]
PM: Registered nosave memory: [mem 0x5e000000-0x5effffff]
PM: Registered nosave memory: [mem 0x5f000000-0x5fffffff]
PM: Registered nosave memory: [mem 0x60000000-0x6fffffff]
PM: Registered nosave memory: [mem 0x70000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x70000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9b5f1fc00000 s107032 r8192 d32232 u262144
pcpu-alloc: s107032 r8192 d32232 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 24752474
Policy zone: Normal
Kernel command line: initrd=\initramfs-linux.img root=LABEL=ROOT rw intel_iommu=on
DMAR: IOMMU enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 98789992K/100581588K available (6642K kernel code, 1150K rwdata, 2788K rodata, 1312K init, 1008K bss, 1791596K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 29077 entries in 114 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 8448, nr_irqs: 896, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3699.108 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7401.47 BogoMIPS (lpj=12330360)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000005ce2b000 end: 0x0000005ce3afff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1630 v3 @ 3.70GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (59209.80 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
PM: Registering ACPI NVS region [mem 0x5bb96000-0x5c75efff] (12357632 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:17:12, date: 01/04/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x60000000-0x6fffffff] (base 0x60000000)
PCI: MMCONFIG at [mem 0x60000000-0x6fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb53e000-0xfb53efff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfb53d000-0xfb53d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb520000-0xfb52ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb53c000-0xfb53c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb500000-0xfb51ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb539000-0xfb539fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb538000-0xfb5383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb530000-0xfb533fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: Enabling MPC IRBNCE
pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: Enabling MPC IRBNCE
pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb537000-0xfb5373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb536000-0xfb5367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb535000-0xfb5350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
acpiphp: Slot [2] registered
pci 0000:01:00.0: [1002:679a] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfb400000-0xfb43ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfb440000-0xfb45ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfb460000-0xfb463fff 64bit]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [1002:679a] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfb300000-0xfb33ffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfb340000-0xfb35ffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:02:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfb360000-0xfb363fff 64bit]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:02:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10de:1d01] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xc000-0xc07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: BAR 3: assigned to efifb
pci 0000:03:00.1: [10de:0fb8] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1969:e091] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfb200000-0xfb23ffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xb000-0xb07f]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:06:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
pci 0000:06:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:03:00.0: vgaarb: bridge control possible
pci 0000:02:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x51557018-0x53ffffff]
e820: reserve RAM buffer [mem 0x51564018-0x53ffffff]
e820: reserve RAM buffer [mem 0x51575018-0x53ffffff]
e820: reserve RAM buffer [mem 0x51595018-0x53ffffff]
e820: reserve RAM buffer [mem 0x515a6018-0x53ffffff]
e820: reserve RAM buffer [mem 0x5abbe000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5bb96000-0x5bffffff]
e820: reserve RAM buffer [mem 0x5cfac000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5d288000-0x5fffffff]
e820: reserve RAM buffer [mem 0x5e000000-0x5fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0280-0x028f] has been reserved
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: [io 0x02a0-0x02af] has been reserved
system 00:02: [io 0x02b0-0x02bf] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.2: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x70000000-0xfbffbfff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:06: resource 1 [mem 0xfb100000-0xfb1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:05:00.0: set MSI_INTX_DISABLE_BUG flag
Unpacking initramfs...
Freeing initrd memory: 7036K
DMAR: [Firmware Bug]: RMRR entry for device 06:00.0 is broken - applying workaround
DMAR: dmar0: Using Queued invalidation
DMAR: dmar1: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0x5ce2b000 - 0x5ce3afff]
DMAR: Setting identity map for device 0000:00:1a.0 [0x5ce2b000 - 0x5ce3afff]
DMAR: Setting identity map for device 0000:00:1d.0 [0x5ce2b000 - 0x5ce3afff]
DMAR: Setting identity map for device 0000:06:00.0 [0x5ce2b000 - 0x5ce3afff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:ff:0b.0 to group 0
iommu: Adding device 0000:ff:0b.1 to group 0
iommu: Adding device 0000:ff:0b.2 to group 0
iommu: Adding device 0000:ff:0c.0 to group 1
iommu: Adding device 0000:ff:0c.1 to group 1
iommu: Adding device 0000:ff:0c.2 to group 1
iommu: Adding device 0000:ff:0c.3 to group 1
iommu: Adding device 0000:ff:0f.0 to group 2
iommu: Adding device 0000:ff:0f.1 to group 2
iommu: Adding device 0000:ff:0f.4 to group 2
iommu: Adding device 0000:ff:0f.5 to group 2
iommu: Adding device 0000:ff:0f.6 to group 2
iommu: Adding device 0000:ff:10.0 to group 3
iommu: Adding device 0000:ff:10.1 to group 3
iommu: Adding device 0000:ff:10.5 to group 3
iommu: Adding device 0000:ff:10.6 to group 3
iommu: Adding device 0000:ff:10.7 to group 3
iommu: Adding device 0000:ff:12.0 to group 4
iommu: Adding device 0000:ff:12.1 to group 4
iommu: Adding device 0000:ff:13.0 to group 5
iommu: Adding device 0000:ff:13.1 to group 5
iommu: Adding device 0000:ff:13.2 to group 5
iommu: Adding device 0000:ff:13.3 to group 5
iommu: Adding device 0000:ff:13.4 to group 5
iommu: Adding device 0000:ff:13.5 to group 5
iommu: Adding device 0000:ff:13.6 to group 5
iommu: Adding device 0000:ff:13.7 to group 5
iommu: Adding device 0000:ff:14.0 to group 6
iommu: Adding device 0000:ff:14.1 to group 6
iommu: Adding device 0000:ff:14.2 to group 6
iommu: Adding device 0000:ff:14.3 to group 6
iommu: Adding device 0000:ff:14.4 to group 6
iommu: Adding device 0000:ff:14.5 to group 6
iommu: Adding device 0000:ff:14.6 to group 6
iommu: Adding device 0000:ff:14.7 to group 6
iommu: Adding device 0000:ff:15.0 to group 7
iommu: Adding device 0000:ff:15.1 to group 7
iommu: Adding device 0000:ff:15.2 to group 7
iommu: Adding device 0000:ff:15.3 to group 7
iommu: Adding device 0000:ff:16.0 to group 8
iommu: Adding device 0000:ff:16.6 to group 8
iommu: Adding device 0000:ff:16.7 to group 8
iommu: Adding device 0000:ff:17.0 to group 9
iommu: Adding device 0000:ff:17.4 to group 9
iommu: Adding device 0000:ff:17.5 to group 9
iommu: Adding device 0000:ff:17.6 to group 9
iommu: Adding device 0000:ff:17.7 to group 9
iommu: Adding device 0000:ff:1e.0 to group 10
iommu: Adding device 0000:ff:1e.1 to group 10
iommu: Adding device 0000:ff:1e.2 to group 10
iommu: Adding device 0000:ff:1e.3 to group 10
iommu: Adding device 0000:ff:1e.4 to group 10
iommu: Adding device 0000:ff:1f.0 to group 11
iommu: Adding device 0000:ff:1f.2 to group 11
iommu: Adding device 0000:00:00.0 to group 12
iommu: Adding device 0000:00:01.0 to group 13
iommu: Adding device 0000:00:02.0 to group 14
iommu: Adding device 0000:00:03.0 to group 15
iommu: Adding device 0000:00:05.0 to group 16
iommu: Adding device 0000:00:05.1 to group 16
iommu: Adding device 0000:00:05.2 to group 16
iommu: Adding device 0000:00:05.4 to group 16
iommu: Adding device 0000:00:11.0 to group 17
iommu: Adding device 0000:00:11.4 to group 17
iommu: Adding device 0000:00:14.0 to group 18
iommu: Adding device 0000:00:16.0 to group 19
iommu: Adding device 0000:00:19.0 to group 20
iommu: Adding device 0000:00:1a.0 to group 21
iommu: Adding device 0000:00:1b.0 to group 22
iommu: Adding device 0000:00:1c.0 to group 23
iommu: Adding device 0000:00:1c.2 to group 24
iommu: Adding device 0000:00:1c.4 to group 25
iommu: Adding device 0000:00:1d.0 to group 26
iommu: Adding device 0000:00:1f.0 to group 27
iommu: Adding device 0000:00:1f.2 to group 27
iommu: Adding device 0000:00:1f.3 to group 27
iommu: Adding device 0000:01:00.0 to group 28
iommu: Adding device 0000:01:00.1 to group 28
iommu: Adding device 0000:02:00.0 to group 29
iommu: Adding device 0000:02:00.1 to group 29
iommu: Adding device 0000:03:00.0 to group 30
iommu: Adding device 0000:03:00.1 to group 30
iommu: Adding device 0000:05:00.0 to group 31
iommu: Adding device 0000:06:00.0 to group 32
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=25 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.0: AER enabled with IRQ 25
pcieport 0000:00:02.0: AER enabled with IRQ 27
pcieport 0000:00:03.0: AER enabled with IRQ 29
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:02.0: Signaling PME with IRQ 27
pcieport 0000:00:03.0: Signaling PME with IRQ 29
pcieport 0000:00:1c.0: Signaling PME with IRQ 30
pcieport 0000:00:1c.2: Signaling PME with IRQ 31
pcieport 0000:00:1c.4: Signaling PME with IRQ 32
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xc1000000-0xc1200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xc1000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
intel_rdt: Intel RDT L3 monitoring detected
RAS: Correctable Errors collector initialized.
microcode: sig=0x306f2, pf=0x1, revision=0x38
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (525048609, 0)->(635118579, -110069970)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 2:48:274
tty tty11: hash matches
acpi device:1de: hash matches
acpi device:7c: hash matches
rtc_cmos 00:00: setting system clock to 2018-01-04 10:17:12 UTC (1515061032)
Freeing unused kernel memory: 1312K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1528K
Freeing unused kernel memory: 1308K
i8042: PNP: No PS/2 controller found.
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i8042: PNP: No PS/2 controller found.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb538000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb537000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:06:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb53d000 port 0xfb53d100 irq 41
ata2: SATA max UDMA/133 abar m2048@0xfb53d000 port 0xfb53d180 irq 41
ata3: SATA max UDMA/133 abar m2048@0xfb53d000 port 0xfb53d200 irq 41
ata4: SATA max UDMA/133 abar m2048@0xfb53d000 port 0xfb53d280 irq 41
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x38 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: DUMMY
ata6: DUMMY
ata7: DUMMY
ata8: SATA max UDMA/133 abar m2048@0xfb536000 port 0xfb536280 irq 42
ata9: SATA max UDMA/133 abar m2048@0xfb536000 port 0xfb536300 irq 42
ata10: SATA max UDMA/133 abar m2048@0xfb536000 port 0xfb536380 irq 42
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-3: new high-speed USB device number 2 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-9: WDC WD10JFCX-68N6GN0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 1A01 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 1A01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD10JFCX-68N 1A01 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 3:0:0:0: [sdd] Attached SCSI disk
sd 2:0:0:0: [sdc] Attached SCSI disk
ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
sd 0:0:0:0: [sda] Attached SCSI disk
ata10.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata10.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata10.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata8.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata8.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata8.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata8.00: NCQ Send/Recv Log not supported
ata8.00: ATA-9: Samsung SSD 840 Series, DXT09B0Q, max UDMA/133
ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata8.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata8.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata8.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata8.00: NCQ Send/Recv Log not supported
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 9B0Q PQ: 0 ANSI: 5
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata10.00: ATA-9: SanDisk Ultra II 480GB, X41200RL, max UDMA/133
ata10.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata8.00: Enabling discard_zeroes_data
ata8.00: Enabling discard_zeroes_data
sd 7:0:0:0: [sde] Attached SCSI disk
ata10.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata10.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata10.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata10.00: configured for UDMA/133
ata9.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata9.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata9.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata9.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata9.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
hub 3-3:1.0: USB hub found
hub 3-3:1.0: 4 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata9.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata9.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata9.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata9.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 8:0:0:0: [sdf] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 8:0:0:0: [sdf] Write Protect is off
sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00
scsi 9:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sdg] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 9:0:0:0: [sdg] Write Protect is off
sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 9:0:0:0: [sdg] Attached SCSI disk
usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
sdf: sdf1 sdf2
sd 8:0:0:0: [sdf] Attached SCSI disk
hub 4-3:1.0: USB hub found
hub 4-3:1.0: 4 ports detected
raid6: sse2x1 gen() 10464 MB/s
raid6: sse2x1 xor() 9104 MB/s
usb 2-1.8: new low-speed USB device number 3 using ehci-pci
raid6: sse2x2 gen() 13846 MB/s
usb 3-13: new low-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3698.926 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6aa2bdcfaca, max_idle_ns: 881590797748 ns
raid6: sse2x2 xor() 10459 MB/s
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/0003:046D:C050.0001/input/input0
hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.8/input0
raid6: sse2x4 gen() 18420 MB/s
input: HID 046a:010d as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:046A:010D.0002/input/input1
raid6: sse2x4 xor() 11458 MB/s
hid-generic 0003:046A:010D.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 046a:010d] on usb-0000:00:14.0-13/input0
input: HID 046a:010d as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:046A:010D.0003/input/input2
raid6: avx2x1 gen() 25422 MB/s
hid-generic 0003:046A:010D.0003: input,hidraw2: USB HID v1.11 Device [HID 046a:010d] on usb-0000:00:14.0-13/input1
raid6: avx2x1 xor() 17683 MB/s
raid6: avx2x2 gen() 30302 MB/s
raid6: avx2x2 xor() 18799 MB/s
raid6: avx2x4 gen() 35336 MB/s
raid6: avx2x4 xor() 22024 MB/s
raid6: using algorithm avx2x4 gen() 35336 MB/s
raid6: .... xor() 22024 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label DATA devid 4 transid 29 /dev/sdd
BTRFS: device label DATA devid 2 transid 29 /dev/sdb
BTRFS: device label DATA devid 1 transid 29 /dev/sda
BTRFS: device label ROOT devid 1 transid 1537 /dev/sdf2
BTRFS: device label DATA devid 3 transid 29 /dev/sdc
clocksource: Switched to clocksource tsc
BTRFS info (device sdf2): using free space tree
BTRFS info (device sdf2): has skinny extents
BTRFS info (device sdf2): enabling ssd optimizations
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Swap.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Login Prompts.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
i8042: PNP: No PS/2 controller found.
i8042: PNP: No PS/2 controller found.
random: crng init done
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
PTP clock support registered
input: PC Speaker as /devices/platform/pcspkr/input/input5
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
Linux agpgart interface v0.103
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:95:7c:32]
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
alx 0000:05:00.0 enp5s0: renamed from eth0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
BTRFS info (device sdc): using free space tree
BTRFS info (device sdc): has skinny extents
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (c1000000 300000) vs hw (e0000000 10000000)
radeon 0000:01:00.0: enabling device (0100 -> 0103)
[drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1458:0x254C 0x00).
nvidia-nvlink: Nvlink Core is being initialized, major device number 239
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC MC0: Giving out device to module sb_edac.c controller Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:95:7c:34
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 enp0s25: renamed from eth0
systemd-journald[323]: Received request to flush runtime journal from PID 1
ATOM BIOS: GV
[drm] GPU not posted. posting now...
[drm] Changing default dispclk from 500Mhz to 600Mhz
radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
nvidia 0000:03:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[TTM] Zone kernel: Available graphics memory: 49496162 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading tahiti Microcode
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.34 Tue Nov 21 03:09:00 PST 2017 (using threaded interrupts)
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f02 = 17a3082/6
[drm] radeon: dpm initialized
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.34 Tue Nov 21 02:09:45 PST 2017
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[drm] probing gen 2 caps for device 8086:2f02 = 17a3082/6
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff9b5eb639cc00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff9b5eb639cc04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff9b5eb639cc08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff9b5eb639cc0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff9b5eb639cc10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffaed7c8e35a18
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff9b5eb639cc18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff9b5eb639cc1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 21 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Cannot find any crtc or sizes
kfd kfd: DID 679a is missing in supported_devices
kfd kfd: kgd2kfd_probe failed
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
checking generic (c1000000 300000) vs hw (d0000000 10000000)
radeon 0000:02:00.0: enabling device (0100 -> 0103)
[drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:03:00.0 on minor 1
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1458:0x254C 0x00).
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
ATOM BIOS: GV
[drm] GPU not posted. posting now...
[drm] Changing default dispclk from 500Mhz to 600Mhz
radeon 0000:02:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
radeon 0000:02:00.0: GTT: 2048M 0x00000000C0000000 - 0x000000013FFFFFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits DDR
[drm] radeon: 3072M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading tahiti Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f04 = 37a3103/e
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:2f04 = 37a3103/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:02:00.0: WB enabled
radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff9b5ea1b82c00
radeon 0000:02:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff9b5ea1b82c04
radeon 0000:02:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff9b5ea1b82c08
radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff9b5ea1b82c0c
radeon 0000:02:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff9b5ea1b82c10
radeon 0000:02:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffaed7cb835a18
radeon 0000:02:00.0: fence driver on ring 6 use gpu addr 0x00000000c0000c18 and cpu addr 0xffff9b5ea1b82c18
radeon 0000:02:00.0: fence driver on ring 7 use gpu addr 0x00000000c0000c1c and cpu addr 0xffff9b5ea1b82c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:02:00.0: radeon: MSI limited to 32-bit
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 22 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Cannot find any crtc or sizes
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
alx 0000:05:00.0 enp5s0: NIC Up: 1 Gbps Full
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-3
[drm] HPD5
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-4
[drm] HPD4
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-2
[drm] HPD1
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-2
[drm] HPD3
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Cannot find any crtc or sizes
kfd kfd: DID 679a is missing in supported_devices
kfd kfd: kgd2kfd_probe failed
[drm] Initialized radeon 2.50.0 20080528 for 0000:02:00.0 on minor 2
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:02:00.1: Force to non-snoop mode
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card2/input20
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card2/input21
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card2/input22
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card2/input23
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card2/input24
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:02:00.1/sound/card2/input25
[drm] amdgpu kernel modesetting enabled.
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card3/input26
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card3/input27
[drm] Cannot find any crtc or sizes
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller _nv001193rm+0x166/0x1c0 [nvidia] mapping multiple BARs
NVRM: Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-49beebd2-16d2-e9f5-bd62-abbe113192ac) @ PCI:0000:03:00.0
radeon_dp_aux_transfer_native: 326 callbacks suppressed
radeon_dp_aux_transfer_native: 326 callbacks suppressed