dmesg - 20171229-001-tesseract
Linux version 4.14.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.7-1 (2017-12-22)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dbba3fff] usable
BIOS-e820: [mem 0x00000000dbba4000-0x00000000dbfe1fff] reserved
BIOS-e820: [mem 0x00000000dbfe2000-0x00000000dc0effff] ACPI data
BIOS-e820: [mem 0x00000000dc0f0000-0x00000000dc711fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc712000-0x00000000dd71bfff] reserved
BIOS-e820: [mem 0x00000000dd71c000-0x00000000dd71cfff] usable
BIOS-e820: [mem 0x00000000dd71d000-0x00000000dd7a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd7a3000-0x00000000ddbddfff] usable
BIOS-e820: [mem 0x00000000ddbde000-0x00000000ddff3fff] reserved
BIOS-e820: [mem 0x00000000ddff4000-0x00000000ddffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000081fffffff] usable
NX (Execute Disable) protection: active
random: fast init done
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/SABERTOOTH X79, BIOS 4608 12/24/2013
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x820000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FF800000000 write-back
1 base 000800000000 mask 3FFFE0000000 write-back
2 base 0000DF000000 mask 3FFFFF000000 uncachable
3 base 0000E0000000 mask 3FFFE0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xde000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd930-0x000fd93f] mapped at [ffffffffff000930]
Base memory trampoline at [ffff8a9000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x309156000, 0x309156fff] PGTABLE
BRK [0x309157000, 0x309157fff] PGTABLE
BRK [0x309158000, 0x309158fff] PGTABLE
BRK [0x309159000, 0x309159fff] PGTABLE
BRK [0x30915a000, 0x30915afff] PGTABLE
BRK [0x30915b000, 0x30915bfff] PGTABLE
BRK [0x30915c000, 0x30915cfff] PGTABLE
BRK [0x30915d000, 0x30915dfff] PGTABLE
BRK [0x30915e000, 0x30915efff] PGTABLE
BRK [0x30915f000, 0x30915ffff] PGTABLE
RAMDISK: [mem 0x35bb9000-0x36dd3fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC018070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC022238 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DC018168 00A0C9 (v02 ALASKA A M I 00000016 INTL 20051117)
ACPI: FACS 0x00000000DC709080 000040
ACPI: APIC 0x00000000DC022348 0000C8 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC022410 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DC022458 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DC022498 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: BGRT 0x00000000DC0EF650 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC022528 0CD128 (v02 INTEL CpuPm 00004000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000081fffffff]
NODE_DATA(0) allocated [mem 0x81fffb000-0x81fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000081fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000dbba3fff]
node 0: [mem 0x00000000dd71c000-0x00000000dd71cfff]
node 0: [mem 0x00000000dd7a3000-0x00000000ddbddfff]
node 0: [mem 0x00000000ddff4000-0x00000000ddffffff]
node 0: [mem 0x0000000100000000-0x000000081fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000081fffffff]
On node 0 totalpages: 8372105
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 14016 pages used for memmap
DMA32 zone: 897004 pages, LIFO batch:31
Normal zone: 116736 pages used for memmap
Normal zone: 7471104 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdbba4000-0xdbfe1fff]
PM: Registered nosave memory: [mem 0xdbfe2000-0xdc0effff]
PM: Registered nosave memory: [mem 0xdc0f0000-0xdc711fff]
PM: Registered nosave memory: [mem 0xdc712000-0xdd71bfff]
PM: Registered nosave memory: [mem 0xdd71d000-0xdd7a2fff]
PM: Registered nosave memory: [mem 0xddbde000-0xddff3fff]
PM: Registered nosave memory: [mem 0xde000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xf0000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ffff8a981fc00000 s115288 r8192 d32168 u262144
pcpu-alloc: s115288 r8192 d32168 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists, mobility grouping on. Total pages: 8241268
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32862492K/33488420K available (6907K kernel code, 1139K rwdata, 3036K rodata, 1484K init, 696K bss, 625928K reserved, 0K cma-reserved)
ftrace: allocating 28989 entries in 114 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 33024, nr_irqs: 896, preallocated irqs: 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3702.263 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7404.52 BogoMIPS (lpj=14809052)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170728
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 21 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 28K
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4820K CPU @ 3.70GHz (family: 0x6, model: 0x3e, stepping: 0x4)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (59236.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdc0f0000-0xdc711fff] (6430720 bytes)
PM: Registering ACPI NVS region [mem 0xdd71d000-0xdd7a2fff] (548864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb72a000-0xfb72afff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb729000-0xfb72900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfb700000-0xfb71ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfb728000-0xfb728fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb727000-0xfb7273ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb720000-0xfb723fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb726000-0xfb7263ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb725000-0xfb7257ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb724000-0xfb7240ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:1004] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:02:00.1: enabling Extended Tags
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfb600000-0xfb607fff 64bit]
pci 0000:06:00.0: PME# supported from D3cold
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:07:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfb500000-0xfb507fff 64bit]
pci 0000:07:00.0: PME# supported from D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:08:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]
pci 0000:08:00.0: PME# supported from D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:09:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:09:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:09:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:09:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:09:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:09:00.0: reg 0x24: [mem 0xfb300000-0xfb3001ff]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:0a:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:0a:00.0: reg 0x10: [mem 0xfb200000-0xfb2007ff 64bit]
pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:0a:00.0: supports D2
pci 0000:0a:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:0b:00.0: [1b4b:9130] type 00 class 0x010601
pci 0000:0b:00.0: reg 0x10: [io 0xb040-0xb047]
pci 0000:0b:00.0: reg 0x14: [io 0xb030-0xb033]
pci 0000:0b:00.0: reg 0x18: [io 0xb020-0xb027]
pci 0000:0b:00.0: reg 0x1c: [io 0xb010-0xb013]
pci 0000:0b:00.0: reg 0x20: [io 0xb000-0xb00f]
pci 0000:0b:00.0: reg 0x24: [mem 0xfb110000-0xfb1107ff]
pci 0000:0b:00.0: reg 0x30: [mem 0xfb100000-0xfb10ffff pref]
pci 0000:0b:00.0: Enabling fixed DMA alias to 00.1
pci 0000:0b:00.0: PME# supported from D3hot
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:02:00.0: vgaarb: setting as boot VGA device
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdbba4000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdd71d000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddbde000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:03.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb600000-0xfb6fffff]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.7: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb600000-0xfb6fffff]
pci_bus 0000:07: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:08: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:09: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:0a: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0c: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0c: resource 10 [mem 0xe0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 18540K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd7ba4000-0xdbba4000] (64MB) mapped at [ffff8a90d7ba4000-ffff8a90dbba3fff]
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1514321239.592:1): state=initialized audit_enabled=0 res=1
workingset: timestamp_bits=40 max_order=23 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: sig=0x306e4, pf=0x4, revision=0x416
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (854222294, 0)->(860062323, -5840029)
registered taskstats version 1
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
rtc_cmos 00:02: setting system clock to 2017-12-26 20:47:20 UTC (1514321240)
Freeing unused kernel memory: 1484K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1260K
Freeing unused kernel memory: 1060K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
SCSI subsystem initialized
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 1
libata version 3.00 loaded.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
firewire_ohci 0000:0a:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
xhci_hcd 0000:06:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:06:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:06:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
xhci_hcd 0000:08:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
usb usb5: SerialNumber: 0000:08:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.14.0-2-amd64 xhci-hcd
usb usb6: SerialNumber: 0000:08:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 40:16:7e:7a:a6:9d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb727000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.14.0-2-amd64 ehci_hcd
usb usb7: SerialNumber: 0000:00:1a.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb726000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: EHCI Host Controller
usb usb8: Manufacturer: Linux 4.14.0-2-amd64 ehci_hcd
usb usb8: SerialNumber: 0000:00:1d.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725100 irq 52
ata2: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725180 irq 52
ata3: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725200 irq 52
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xfb725000 port 0xfb725300 irq 52
ata6: DUMMY
ahci 0000:09:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:09:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb300000 port 0xfb300100 irq 53
ata8: SATA max UDMA/133 abar m512@0xfb300000 port 0xfb300180 irq 53
ahci 0000:0b:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:0b:00.0: flags: 64bit ncq pio
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
scsi host11: ahci
scsi host12: ahci
scsi host13: ahci
scsi host14: ahci
scsi host15: ahci
ata9: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110100 irq 54
ata10: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110180 irq 54
ata11: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110200 irq 54
ata12: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110280 irq 54
ata13: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110300 irq 54
ata14: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110380 irq 54
ata15: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110400 irq 54
ata16: SATA max UDMA/133 abar m2048@0xfb110000 port 0xfb110480 irq 54
firewire_core 0000:0a:00.0: created device fw0: GUID 001e8c000064b4af, S400
usb 7-1: new high-speed USB device number 2 using ehci-pci
usb 8-1: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 3702.215 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6abb059e0c5, max_idle_ns: 881591073789 ns
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-9: WDC WD2003FZEX-00Z4SA0, 01.01A01, max UDMA/133
ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: NCQ Send/Recv Log not supported
ata3.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
ata3.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: NCQ Send/Recv Log not supported
ata3.00: configured for UDMA/133
ata5.00: configured for UDMA/133
ata2.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
ata2.00: configured for UDMA/100
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
usb 7-1: New USB device found, idVendor=8087, idProduct=0024
usb 7-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 6 ports detected
usb 8-1: New USB device found, idVendor=8087, idProduct=0024
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 8-1:1.0: USB hub found
hub 8-1:1.0: 8 ports detected
usb 7-1.3: new high-speed USB device number 3 using ehci-pci
usb 8-1.2: new high-speed USB device number 3 using ehci-pci
usb 7-1.3: New USB device found, idVendor=05e3, idProduct=0723
usb 7-1.3: New USB device strings: Mfr=3, Product=4, SerialNumber=0
usb 7-1.3: Product: USB Storage
usb 7-1.3: Manufacturer: Generic
usb-storage 7-1.3:1.0: USB Mass Storage device detected
usb-storage 7-1.3:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi host16: usb-storage 7-1.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 8-1.2: New USB device found, idVendor=046d, idProduct=082c
usb 8-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 8-1.2: Product: HD Webcam C615
usb 8-1.2: SerialNumber: 1C431160
usb 8-1.3: new low-speed USB device number 4 using ehci-pci
usb 8-1.3: New USB device found, idVendor=046d, idProduct=c248
usb 8-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1.3: Product: Gaming Keyboard G105
usb 8-1.3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.3/8-1.3:1.0/0003:046D:C248.0001/input/input0
hid-generic 0003:046D:C248.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Gaming Keyboard G105] on usb-0000:00:1d.0-1.3/input0
input: Logitech Gaming Keyboard G105 as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.3/8-1.3:1.1/0003:046D:C248.0002/input/input1
usb 8-1.4: new full-speed USB device number 5 using ehci-pci
clocksource: Switched to clocksource tsc
hid-generic 0003:046D:C248.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [Logitech Gaming Keyboard G105] on usb-0000:00:1d.0-1.3/input1
usb 8-1.4: New USB device found, idVendor=1038, idProduct=1384
usb 8-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 8-1.4: Product: Rival Gaming Mouse
usb 8-1.4: Manufacturer: SteelSeries
hid-generic 0003:1038:1384.0003: hiddev1,hidraw2: USB HID v1.11 Device [SteelSeries Rival Gaming Mouse] on usb-0000:00:1d.0-1.4/input0
input: SteelSeries Rival Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.4/8-1.4:1.1/0003:1038:1384.0004/input/input2
hid-generic 0003:1038:1384.0004: input,hidraw3: USB HID v1.11 Mouse [SteelSeries Rival Gaming Mouse] on usb-0000:00:1d.0-1.4/input1
input: SteelSeries Rival Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.4/8-1.4:1.2/0003:1038:1384.0005/input/input3
hid-generic 0003:1038:1384.0005: input,hidraw4: USB HID v1.11 Keyboard [SteelSeries Rival Gaming Mouse] on usb-0000:00:1d.0-1.4/input2
input: SteelSeries Rival Gaming Mouse as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.4/8-1.4:1.3/0003:1038:1384.0006/input/input4
hid-generic 0003:1038:1384.0006: input,hidraw5: USB HID v1.11 Device [SteelSeries Rival Gaming Mouse] on usb-0000:00:1d.0-1.4/input3
scsi 16:0:0:0: Direct-Access Generic STORAGE DEVICE 9451 PQ: 0 ANSI: 0
sd 16:0:0:0: [sda] Attached SCSI removable disk
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
scsi 1:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access ATA WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5
ata3.00: Enabling discard_zeroes_data
sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 >
ata3.00: Enabling discard_zeroes_data
sd 2:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ata8: SATA link down (SStatus 0 SControl 300)
scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
PM: Starting manual resume from disk
PM: Image not found (code -22)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 236 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[322]: Received request to flush runtime journal from PID 1
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 244
nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 384.98 Thu Oct 26 15:16:01 PDT 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 384.98 Thu Oct 26 14:41:13 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 16:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 15:0:0:0: Attached scsi generic sg4 type 3
input: PC Speaker as /devices/platform/pcspkr/input/input7
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
Adding 10157052k swap on /dev/sdb5. Priority:-2 extents:1 across:10157052k SSFS
asus_wmi: ASUS WMI generic driver loaded
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
asus_wmi: Initialization: 0x0
iTCO_vendor_support: vendor-support=0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
asus_wmi: Number of fans: 1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
media: Linux media interface: v0.10
Linux video capture interface: v2.00
usb 8-1.2: current rate 0 is different from the runtime rate 16000
usb 8-1.2: current rate 0 is different from the runtime rate 24000
usb 8-1.2: current rate 0 is different from the runtime rate 32000
usb 8-1.2: current rate 0 is different from the runtime rate 48000
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HD Webcam C615 (046d:082c)
uvcvideo 8-1.2:1.2: Entity type for entity Extension 5 was not initialized!
uvcvideo 8-1.2:1.2: Entity type for entity Processing 2 was not initialized!
uvcvideo 8-1.2:1.2: Entity type for entity Camera 1 was not initialized!
uvcvideo 8-1.2:1.2: Entity type for entity Extension 6 was not initialized!
uvcvideo 8-1.2:1.2: Entity type for entity Extension 7 was not initialized!
uvcvideo 8-1.2:1.2: Entity type for entity Extension 8 was not initialized!
input: HD Webcam C615 as /devices/pci0000:00/0000:00:1d.0/usb8/8-1/8-1.2/8-1.2:1.2/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: CPU SrcID #0, Ha #0, Channel #0 has DIMMs, but ECC is disabled
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
random: crng init done
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1514321289.928:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=643 comm="apparmor_parser"
audit: type=1400 audit(1514321289.928:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=644 comm="apparmor_parser"
audit: type=1400 audit(1514321289.928:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=646 comm="apparmor_parser"
audit: type=1400 audit(1514321289.932:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1514321289.932:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//filter" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1514321289.932:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man//groff" pid=642 comm="apparmor_parser"
audit: type=1400 audit(1514321289.940:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=652 comm="apparmor_parser"
audit: type=1400 audit(1514321289.944:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=648 comm="apparmor_parser"
audit: type=1400 audit(1514321289.944:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=649 comm="apparmor_parser"
audit: type=1400 audit(1514321289.944:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=649 comm="apparmor_parser"
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input19
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:02:00.1/sound/card1/input21
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3702212919 Hz
vboxdrv: Successfully loaded version 5.2.4_Debian (interface 0x00290000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Netfilter messages via NETLINK v0.30.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
device eth0 entered promiscuous mode
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller os_map_kernel_space.part.2+0x6d/0x80 [nvidia] mapping multiple BARs
nvidia-modeset: Allocated GPU:0 (GPU-04e4a11c-2ea1-16c1-3991-e95073d2c948) @ PCI:0000:02:00.0
usb 8-1.2: reset high-speed USB device number 3 using ehci-pci
usb 8-1.2: current rate 0 is different from the runtime rate 48000
usb 8-1.2: current rate 0 is different from the runtime rate 48000
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
fuse init (API version 7.26)
usb 8-1.2: current rate 0 is different from the runtime rate 48000
usb 8-1.2: current rate 0 is different from the runtime rate 48000
rfkill: input handler disabled
show_signal_msg: 13 callbacks suppressed
gst-plugin-scan[11044]: segfault at 0 ip 00007f35001ad320 sp 00007ffd5c3789c0 error 4 in ld-2.25.so[7f35001a4000+23000]
gst-plugin-scan[11070]: segfault at 0 ip 00007f297fef6320 sp 00007ffd7ac9c400 error 4 in ld-2.25.so[7f297feed000+23000]
perf: interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
e1000e: eth0 NIC Link is Down
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e: eth0 NIC Link is Down
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
perf: interrupt took too long (3161 > 3153), lowering kernel.perf_event_max_sample_rate to 63250
gst-plugin-scan[14138]: segfault at 0 ip 00007fdbd7262320 sp 00007ffd72674760 error 4 in ld-2.25.so[7fdbd7259000+23000]
gst-plugin-scan[15741]: segfault at 0 ip 00007fd9351b1320 sp 00007ffd98becac0 error 4 in ld-2.25.so[7fd9351a8000+23000]
gst-plugin-scan[15799]: segfault at 0 ip 00007f6b29519320 sp 00007ffc283c4500 error 4 in ld-2.25.so[7f6b29510000+23000]
gst-plugin-scan[15836]: segfault at 0 ip 00007f3407d84320 sp 00007ffde142ba70 error 4 in ld-2.25.so[7f3407d7b000+23000]
gst-plugin-scan[15861]: segfault at 0 ip 00007f8255186320 sp 00007ffd42ec6020 error 4 in ld-2.25.so[7f825517d000+23000]
gst-plugin-scan[15890]: segfault at 0 ip 00007f81b2437320 sp 00007ffe6a919420 error 4 in ld-2.25.so[7f81b242e000+23000]
gst-plugin-scan[15902]: segfault at 0 ip 00007f9586a59320 sp 00007fff54c89e80 error 4 in ld-2.25.so[7f9586a50000+23000]
gst-plugin-scan[15913]: segfault at 0 ip 00007f7f19489320 sp 00007ffde142f930 error 4 in ld-2.25.so[7f7f19480000+23000]
gst-plugin-scan[15925]: segfault at 0 ip 00007fe43d8b2320 sp 00007ffdf8c44f70 error 4 in ld-2.25.so[7fe43d8a9000+23000]
gst-plugin-scan[16491]: segfault at 0 ip 00007f4a6de2c320 sp 00007fff65af0060 error 4 in ld-2.25.so[7f4a6de23000+23000]
perf: interrupt took too long (3974 > 3951), lowering kernel.perf_event_max_sample_rate to 50250
gst-plugin-scan[5440]: segfault at 0 ip 00007ffb5229b320 sp 00007ffd866d0ff0 error 4 in ld-2.25.so[7ffb52292000+23000]
audit: type=1400 audit(1514446796.374:25): apparmor="ALLOWED" operation="open" profile="libreoffice-oopslash" name="/run/user/1000/gdm/Xauthority" pid=16474 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
audit: type=1400 audit(1514446796.378:26): apparmor="ALLOWED" operation="open" profile="libreoffice-oopslash" name="/sys/devices/pci0000:00/0000:00:1a.0/usb7/7-1/7-1.3/7-1.3:1.0/host16/target16:0:0/16:0:0:0/block/sda/queue/rotational" pid=16474 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.378:27): apparmor="ALLOWED" operation="open" profile="libreoffice-oopslash" name="/sys/devices/pci0000:00/0000:00:1a.0/usb7/7-1/7-1.3/7-1.3:1.0/host16/target16:0:0/16:0:0:0/block/sda/queue/rotational" pid=16474 comm="oosplash" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.922:28): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-384.98-rc" pid=16494 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.994:29): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/nvidia/nvidia-application-profiles-384.98-rc" pid=16494 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.998:30): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=16494 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.998:31): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/driver/nvidia/params" pid=16494 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.998:32): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidiactl" pid=16494 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.998:33): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/proc/modules" pid=16494 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1514446796.998:34): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/dev/nvidia-modeset" pid=16494 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=0
usb 7-1.4: new high-speed USB device number 4 using ehci-pci
usb 7-1.4: New USB device found, idVendor=04e8, idProduct=6860
usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.4: Product: SAMSUNG_Android
usb 7-1.4: Manufacturer: SAMSUNG
usb 7-1.4: SerialNumber: 4f18f249
cdc_acm 7-1.4:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usb 7-1.4: USB disconnect, device number 4
cdc_acm 7-1.4:1.2: urb 15 failed submission with -19
cdc_acm 7-1.4:1.1: failed to set dtr/rts
usb 7-1.4: new high-speed USB device number 5 using ehci-pci
usb 7-1.4: New USB device found, idVendor=04e8, idProduct=6860
usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.4: Product: SAMSUNG_Android
usb 7-1.4: Manufacturer: SAMSUNG
usb 7-1.4: SerialNumber: 4f18f249
cdc_acm 7-1.4:1.1: ttyACM0: USB ACM device
usb 7-1.4: USB disconnect, device number 5
cdc_acm 7-1.4:1.2: urb 0 failed submission with -19
cdc_acm 7-1.4:1.1: failed to set dtr/rts
usb 7-1.4: new high-speed USB device number 6 using ehci-pci
usb 7-1.4: New USB device found, idVendor=04e8, idProduct=6860
usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 7-1.4: Product: SAMSUNG_Android
usb 7-1.4: Manufacturer: SAMSUNG
usb 7-1.4: SerialNumber: 4f18f249
cdc_acm 7-1.4:1.1: ttyACM0: USB ACM device
usb 7-1.4: USB disconnect, device number 6
cdc_acm 7-1.4:1.2: urb 8 failed submission with -19
cdc_acm 7-1.4:1.1: failed to set dtr/rts
i2c /dev entries driver
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
perf: interrupt took too long (4975 > 4967), lowering kernel.perf_event_max_sample_rate to 40000