dmesg - z50-75-fsmark
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfdffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8bbfb000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xfec20000-0xfec20fff] could not be reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD0624 ETD0000 PNP0f13 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0530-0x0537] has been reserved
system 00:04: [io 0x0800-0x0827] has been reserved
system 00:04: [io 0x0830] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: [io 0x0b00-0x0b1f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0cf9] could not be reserved
system 00:04: [io 0x8100-0x81ff window] has been reserved
system 00:04: [io 0x8200-0x82ff window] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [mem 0xfed61000-0xfed613ff] has been reserved
system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0b60000-0xf0b7ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0a40000-0xf0a5ffff pref]
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.1: bridge window [mem 0xf0a00000-0xf0afffff]
pci 0000:00:02.1: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:03.1: PCI bridge to [bus 02]
pci 0000:00:03.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:03.1: bridge window [mem 0xf0900000-0xf09fffff]
pci 0000:00:03.3: PCI bridge to [bus 03]
pci 0000:00:03.3: bridge window [io 0x1000-0x1fff]
pci 0000:00:03.3: bridge window [mem 0xf0800000-0xf08fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 6 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 8 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 17 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: resource 18 [mem 0xfc000000-0xfdffffff window]
pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 20 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 21 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0a00000-0xf0afffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0900000-0xf09fffff]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf08fffff]
pci_bus 0000:04: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 5 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:04: resource 6 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:04: resource 7 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:04: resource 8 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:04: resource 9 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 10 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 11 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 12 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 13 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 14 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 15 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:04: resource 16 [mem 0x000ec000-0x000effff window]
pci_bus 0000:04: resource 17 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:04: resource 18 [mem 0xfc000000-0xfdffffff window]
pci_bus 0000:04: resource 19 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:04: resource 20 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 21 [io 0x0d00-0xffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:12.0: enabling device (0010 -> 0012)
pci 0000:00:12.2: PME# does not work under D3, disabling it
pci 0000:00:13.0: enabling device (0010 -> 0012)
pci 0000:00:13.2: PME# does not work under D3, disabling it
pci 0000:00:14.5: enabling device (0010 -> 0012)
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 6980K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x84b1e000-0x88b1e000] (64MB) mapped at [ffff880084b1e000-ffff880088b1dfff]
amd_uncore: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000001ff)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36f24c9be, max_idle_ns: 440795293551 ns
simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x7e9000 bytes, mapped to 0xffffc90001000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
Console: switching to colour frame buffer device 240x67
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
io scheduler bfq-sq registered (default)
BFQ I/O-scheduler: v8r12 (with cgroups support)
pcieport 0000:00:02.1: Signaling PME with IRQ 24
pcieport 0000:00:03.1: Signaling PME with IRQ 25
pcieport 0000:00:03.3: Signaling PME with IRQ 26
pciehp 0000:00:02.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x06003106
microcode: CPU1: patch_level=0x06003106
microcode: CPU2: patch_level=0x06003106
microcode: CPU3: patch_level=0x06003106
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type big_key registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Key type encrypted registered
evm: HMAC attrs: 0x1
Freeing unused kernel memory: 1204K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1504K
Freeing unused kernel memory: 1308K
MuQSS CPU scheduler v0.162 by Con Kolivas.
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b4d900
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.14.6-1-lqx ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b4d800
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.14.6-1-lqx ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
ohci-pci: OHCI PCI platform driver
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.14.6-1-lqx xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.14.6-1-lqx xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xf0b4d000 port 0xf0b4d100 irq 32
ata2: SATA max UDMA/133 abar m2048@0xf0b4d000 port 0xf0b4d180 irq 32
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b4c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.14.6-1-lqx ohci_hcd
usb usb5: SerialNumber: 0000:00:12.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b4b000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.14.6-1-lqx ohci_hcd
usb usb6: SerialNumber: 0000:00:13.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xf0b4a000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.14.6-1-lqx ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 1-3: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-3: New USB device found, idVendor=0bda, idProduct=0129
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB2.0-CRW
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
usb 2-1: New USB device found, idVendor=174f, idProduct=14be
usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1: Product: Lenovo EasyCamera
usb 2-1: Manufacturer: Generic
usb 2-1: SerialNumber: 200901010001
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: OCZ-VERTEX450, 3.0, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX450 3.0 PQ: 0 ANSI: 5
ata2.00: ATA-9: ST1000LM014-SSHD-8GB, LVD4, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST1000LM014-SSHD LVD4 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
sdb: sdb1 sdb6 sdb7 sdb10
sd 1:0:0:0: [sdb] Attached SCSI disk
raid6: sse2x1 gen() 5242 MB/s
raid6: sse2x1 xor() 4050 MB/s
raid6: sse2x2 gen() 7187 MB/s
raid6: sse2x2 xor() 5890 MB/s
raid6: sse2x4 gen() 11046 MB/s
raid6: sse2x4 xor() 4212 MB/s
raid6: using algorithm sse2x4 gen() 11046 MB/s
raid6: .... xor() 4212 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid 614665b2-6311-4060-a0a5-ab83454f80b1 devid 1 transid 50297 /dev/sda5
BTRFS: device fsid 263addda-0585-432d-b455-e93fa2b6d5da devid 1 transid 37516 /dev/sda6
BTRFS info (device sda6): disk space caching is enabled
BTRFS info (device sda6): has skinny extents
BTRFS info (device sda6): enabling ssd optimizations
usb 6-2: new full-speed USB device number 2 using ohci-pci
usb 5-1: new full-speed USB device number 2 using ohci-pci
NET: Registered protocol family 10
Segment Routing with IPv6
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 6-2: New USB device found, idVendor=0bda, idProduct=b728
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 6-2: Product: Bluetooth Radio
usb 6-2: Manufacturer: Realtek
usb 6-2: SerialNumber: 00e04c000001
usb 5-1: New USB device found, idVendor=062a, idProduct=4101
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: 2.4G Keyboard Mouse
usb 5-1: Manufacturer: MOSART Semi.
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Login Prompts.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2096027748 Hz
vboxdrv: Successfully loaded version 5.2.2 (interface 0x00290000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
BTRFS info (device sda6): use lzo compression
BTRFS info (device sda6): disk space caching is enabled
vboxpci: IOMMU not found (not registered)
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=54)
Initialized host personality
/dev/vmmon[213]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[213]: Using tsc_khz as TSC frequency: 2096140
/dev/vmmon[213]: Module vmmon: initialized
systemd-journald[215]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
ACPI: AC Adapter [ADP0] (on-line)
acpi_cpufreq: overriding BIOS provided _PSD data
acpi device:0a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input6
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input8
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMB.SMB0) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x16
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000d99b00). heartbeat=60 sec (nowayout=0)
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC1D0: inputs:
snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
EFI Variables Facility v0.08 2004-May-17
ACPI: Battery Slot [BAT0] (battery present)
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
input: PC Speaker as /devices/platform/pcspkr/input/input12
ATPX version 1, functions 0x00000003
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from simple
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (KAVERI 0x1002:0x1309 0x17AA:0x3830 0x00).
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: 113
[drm] Changing default dispclk from 533Mhz to 600Mhz
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3535444 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading kaveri Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
media: Linux media interface: v0.10
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
pstore: using lzo compression
pstore: Registered efi as persistent store backend
Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
bluetooth hci0: Falling back to user helper
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (174f:14be)
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880218d1bc00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880218d1bc04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880218d1bc08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880218d1bc0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880218d1bc10
uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized!
input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/input/input14
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffc90001438d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff880218d1bc18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff880218d1bc1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[drm] ring test on 5 succeeded in 2 usecs
rtl8723be 0000:03:00.0 wlp3s0: renamed from wlan0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:062A:4101.0001/input/input15
[drm] UVD initialized successfully.
EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
hid-generic 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-1/input0
input: MOSART Semi. 2.4G Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.1/0003:062A:4101.0002/input/input16
hid-generic 0003:062A:4101.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-0000:00:12.0-1/input1
Adding 1486224k swap on /home/swapfile. Priority:-2 extents:86 across:245099924k FS
[drm] ring test on 6 succeeded in 17 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
psmouse serio1: elantech: Elan sample query result 05, 20, 97
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input13
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
[drm] ib test on ring 1 succeeded in 0 usecs
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
NET: Registered protocol family 17
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[drm] fb mappable at 0xE0722000
[drm] vram apper at 0xE0000000
[drm] size 24883200
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
kfd kfd: Allocated 3969056 bytes on gart
GPU was not found in the current topology. Extending.
DEBUG PRINT OF TOPOLOGY:
Creating topology SYSFS entries
kfd kfd: error getting iommu info. is the iommu enabled?
kfd kfd: Error initializing iommuv2 for device 1002:1309
Creating topology SYSFS entries
kfd kfd: device 1002:1309 NOT added due to errors
[drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
radeon 0000:01:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6665 0x17AA:0x1309 0x00).
vga_switcheroo: enabled
ATOM BIOS: Lenovo/LCFC
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 1022:1425 = 733d01/e
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880217905c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880217905c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880217905c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880217905c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880217905c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
kfd kfd: DID 6665 is missing in supported_devices
kfd kfd: kgd2kfd_probe failed
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 1
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
ATPX version 1, functions 0x00000003
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
fuse init (API version 7.26)
xembedsniproxy[696]: segfault at 2 ip 000055c3089beda6 sp 00007fffde218f50 error 4 in xembedsniproxy[55c3089b3000+14000]
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 10:0d:7f:1b:5f:c8
wlp3s0: send auth to 10:0d:7f:1b:5f:c8 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 10:0d:7f:1b:5f:c8 (try 1/3)
wlp3s0: RX AssocResp from 10:0d:7f:1b:5f:c8 (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
Bluetooth: hci0: rom_version status=0 version=1
Bluetooth: cfg_sz 0, total size 22496
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
capability: warning: `turbostat' uses 32-bit capabilities (legacy support in use)
/dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445230647939388869 new 18445230647938084428 attempts 1
radeon_dp_aux_transfer_native: 22 callbacks suppressed
radeon_dp_aux_transfer_native: 22 callbacks suppressed
[drm] probing gen 2 caps for device 1022:1425 = 733d01/e
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880217905c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880217905c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880217905c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880217905c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880217905c10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
sysctl (25706): drop_caches: 3
[drm] probing gen 2 caps for device 1022:1425 = 733d01/e
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880217905c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880217905c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880217905c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880217905c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880217905c10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
radeon_dp_aux_transfer_native: 22 callbacks suppressed
radeon_dp_aux_transfer_native: 22 callbacks suppressed
radeon_dp_aux_transfer_native: 22 callbacks suppressed
[drm] probing gen 2 caps for device 1022:1425 = 733d01/e
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880217905c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880217905c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880217905c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880217905c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880217905c10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] probing gen 2 caps for device 1022:1425 = 733d01/e
[drm] enabling PCIE gen 3 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880217905c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880217905c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880217905c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880217905c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880217905c10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
wlp3s0: deauthenticating from 10:0d:7f:1b:5f:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
hrtimer: interrupt took 15645 ns
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
wlp3s0: authenticate with 10:0d:7f:1b:5f:c8
wlp3s0: send auth to 10:0d:7f:1b:5f:c8 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with 10:0d:7f:1b:5f:c8 (try 1/3)
wlp3s0: RX AssocResp from 10:0d:7f:1b:5f:c8 (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready