dmesg - 2017
system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xcfa00000-0xcfa00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x20000000-0x201fffff] has been reserved
system 00:09: [mem 0x40000000-0x401fffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.3: PCI bridge to [bus 03]
pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.4: PCI bridge to [bus 04]
pci 0000:00:1c.4: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0xb000-0xbfff]
pci 0000:05:00.0: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:1c.5: PCI bridge to [bus 05-06]
pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.5: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:1c.7: PCI bridge to [bus 07]
pci 0000:00:1c.7: bridge window [mem 0xf7800000-0xf78fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 12 [mem 0xcfa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:04: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:06: resource 4 [io 0xb000-0xbfff]
pci_bus 0000:06: resource 5 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:02:00.0: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS mismatch (64 != 32), using 64 bytes
pci 0000:02:00.1: async suspend disabled to avoid multi-function power-on ordering issue
Unpacking initramfs...
Freeing initrd memory: 8576K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc4a2d000-0xc8a2d000] (64MB) mapped at [ffff92e084a2d000-ffff92e088a2cfff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf5000000, mapped to 0xffffb8df41200000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (463028870, 0)->(528675840, -65646970)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 13:834:105
rtc_cmos 00:02: setting system clock to 2017-12-07 02:08:24 UTC (1512612504)
Freeing unused kernel memory: 1328K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1620K
Freeing unused kernel memory: 1988K
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
libata version 3.00 loaded.
pata_jmicron 0000:02:00.1: enabling device (0100 -> 0101)
usbcore: registered new device driver usb
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
scsi host0: pata_jmicron
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems sxs apst
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0xd040 ctl 0xd030 bmdma 0xd000 irq 17
ata2: PATA max UDMA/100 cmd 0xd020 ctl 0xd010 bmdma 0xd008 irq 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
firewire_ohci 0000:06:01.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m2048@0xf7d12000 port 0xf7d12100 irq 24
ata4: SATA max UDMA/133 abar m2048@0xf7d12000 port 0xf7d12180 irq 24
ata5: SATA max UDMA/133 abar m2048@0xf7d12000 port 0xf7d12200 irq 24
ata6: SATA max UDMA/133 abar m2048@0xf7d12000 port 0xf7d12280 irq 24
ata7: SATA max UDMA/133 abar m2048@0xf7d12000 port 0xf7d12300 irq 24
ata8: SATA max UDMA/133 abar m2048@0xf7d12000 port 0xf7d12380 irq 24
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d14000
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m8192@0xf7c10000 port 0xf7c10100 irq 16
ata10: SATA max UDMA/133 abar m8192@0xf7c10000 port 0xf7c10180 irq 16
ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host10: ahci
scsi host11: ahci
ata11: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00100 irq 25
ata12: SATA max UDMA/133 abar m512@0xf7b00000 port 0xf7b00180 irq 25
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d13000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: HPA detected: current 156299375, native 156301488
ata3.00: ATA-6: ST380013AS, 3.00, max UDMA/133
ata3.00: 156299375 sectors, multi 16: LBA48 NCQ (depth 31/32)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hidraw: raw HID events driver (C) Jiri Kosina
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Device USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0C45:7060.0001/input/input1
firewire_core 0000:06:01.2: created device fw0: GUID 00023c0151129441, S400
hid-generic 0003:0C45:7060.0001: input,hidraw0: USB HID v1.00 Device [Device USB Device] on usb-0000:00:14.0-1/input0
input: Device USB Device as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0C45:7060.0002/input/input2
hid-generic 0003:0C45:7060.0002: input,hidraw1: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:14.0-1/input1
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST380013AS 3.00 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156299375 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
usb 2-1.6: new high-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2500.017 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x240949cbdf1, max_idle_ns: 440795269944 ns
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.2: new high-speed USB device number 5 using ehci-pci
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ATA-8: WDC WD15EARS-00MVWB0, 51.0AB51, max UDMA/133
ata5.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD15EARS-00M AB51 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb:
sd 4:0:0:0: [sdb] Attached SCSI removable disk
ata6: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata7.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata7.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata7.00: ATA-6: ST340014A, 3.54, max UDMA/100
ata7.00: 78165360 sectors, multi 16: LBA48
ata7.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata7.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata7.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata7.00: configured for UDMA/100
scsi 6:0:0:0: Direct-Access ATA ST340014A 3.54 PQ: 0 ANSI: 5
sd 6:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.3 GiB)
sd 6:0:0:0: [sdc] Write Protect is off
sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 sdc2
sd 6:0:0:0: [sdc] Attached SCSI removable disk
ata8: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
raid6: sse2x1 gen() 8805 MB/s
raid6: sse2x1 xor() 7071 MB/s
raid6: sse2x2 gen() 11615 MB/s
raid6: sse2x2 xor() 7847 MB/s
raid6: sse2x4 gen() 14034 MB/s
raid6: sse2x4 xor() 9353 MB/s
raid6: using algorithm sse2x4 gen() 14034 MB/s
raid6: .... xor() 9353 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label btr-home devid 1 transid 5829 /dev/sda3
BTRFS: device label BTR-14 devid 1 transid 60 /dev/sda4
BTRFS: device fsid 474f38c2-a71c-4b1d-981b-bae0df54c68b devid 1 transid 1328 /dev/sda2
BTRFS info (device sda2): disk space caching is enabled
BTRFS info (device sda2): has skinny extents
random: crng init done
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
BTRFS info (device sda2): enabling auto defrag
BTRFS info (device sda2): enabling inode map caching
BTRFS info (device sda2): disk space caching is enabled
vhba: loading out-of-tree module taints kernel.
scsi host12: vhba
systemd-journald[257]: Received request to flush runtime journal from PID 1
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: Attached scsi generic sg2 type 0
i2c /dev entries driver
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2500016937 Hz
vboxdrv: Successfully loaded version 5.2.2 (interface 0x00290000)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
SPL: Loaded module v0.7.3-1
znvpair: module license 'CDDL' taints kernel.
Disabling lock debugging due to kernel taint
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\GPR2) (20170728/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170728/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:42: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
usb 1-1.1: USB disconnect, device number 4
Linux agpgart interface v0.103
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
[drm] Memory usable by graphics device = 2048M
checking generic (f5000000 130000) vs hw (d0000000 10000000)
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address bc:5f:f4:2b:7b:85
tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
ZFS: Loaded module v0.7.3-1, ZFS pool version 5000, ZFS filesystem version 5
gameport gameport0: EMU10K1 is pci0000:06:01.1/gameport0, io 0xb040, speed 447kHz
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
input: PC Speaker as /devices/platform/pcspkr/input/input6
[drm] Cannot find any crtc or sizes
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.104 Thu Sep 14 17:13:13 PDT 2017
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[drm] Cannot find any crtc or sizes
snd_emu10k1 0000:06:01.0: Installing spdif_bug patch: SB Audigy 2 ZS [SB0350]
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
tg3 0000:04:00.0 enp4s0: renamed from eth0
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
BTRFS info (device sda3): enabling auto defrag
BTRFS info (device sda3): enabling inode map caching
BTRFS info (device sda3): disk space caching is enabled
BTRFS info (device sda3): has skinny extents
mousedev: PS/2 mouse device common for all mice
usb 2-1.6: reset high-speed USB device number 3 using ehci-pci
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 2-1.6:1.0 wlp0s29u1u6: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
usb 1-1.1: USB disconnect, device number 6
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
tg3 0000:04:00.0 enp4s0: Link is up at 10 Mbps, half duplex
tg3 0000:04:00.0 enp4s0: Flow control is off for TX and off for RX
tg3 0000:04:00.0 enp4s0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller _nv000788rm+0x165/0x1b0 [nvidia] mapping multiple BARs
resource sanity check: requesting [mem 0x000e0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000e0000-0x000e3fff window]
caller _nv013519rm+0x57/0xa0 [nvidia] mapping multiple BARs
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
wlp0s29u1u6: authenticate with a8:f9:4b:6a:7d:a7
wlp0s29u1u6: send auth to a8:f9:4b:6a:7d:a7 (try 1/3)
wlp0s29u1u6: authenticated
wlp0s29u1u6: associate with a8:f9:4b:6a:7d:a7 (try 1/3)
wlp0s29u1u6: RX AssocResp from a8:f9:4b:6a:7d:a7 (capab=0x431 status=0 aid=3)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u6: link becomes ready
wlp0s29u1u6: associated
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
fuse init (API version 7.26)
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
BTRFS: device fsid 78333a9b-64e6-4e83-b636-bec8e5b1687d devid 1 transid 5 /dev/sdb
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
BTRFS: device fsid 1f7ff858-5066-490a-bd2b-e4920042113c devid 1 transid 5 /dev/sdb
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 39 using ehci-pci
usb 1-1.1: reset high-speed USB device number 39 using ehci-pci
usb 1-1.1: reset high-speed USB device number 39 using ehci-pci
usb 1-1.1: reset high-speed USB device number 39 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: reset high-speed USB device number 47 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 50 using ehci-pci
usb 1-1.1: reset high-speed USB device number 50 using ehci-pci
usb 1-1.1: reset high-speed USB device number 50 using ehci-pci
usb 1-1.1: reset high-speed USB device number 50 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 51 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 63 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 66 using ehci-pci
usb 1-1.1: reset high-speed USB device number 66 using ehci-pci
usb 1-1.1: reset high-speed USB device number 66 using ehci-pci
usb 1-1.1: reset high-speed USB device number 66 using ehci-pci
usb 1-1.1: reset high-speed USB device number 66 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
BTRFS info (device sdb): disk space caching is enabled
BTRFS info (device sdb): has skinny extents
BTRFS info (device sdb): flagging fs with big metadata feature
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 71 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 87
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
BTRFS info (device sda4): disk space caching is enabled
BTRFS info (device sda4): has skinny extents
usb 1-1.1: USB disconnect, device number 88
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 89
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 97
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 98
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb-storage 5-1:1.3: USB Mass Storage device detected
scsi host13: usb-storage 5-1:1.3
cdc_acm 5-1:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
scsi 13:0:0:0: Direct-Access LGE Android Platform 0000 PQ: 0 ANSI: 2
scsi 13:0:0:1: Direct-Access LGE Android Platform 0000 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:1: Attached scsi generic sg4 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
sd 13:0:0:1: [sde] Attached SCSI removable disk
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 5-1: USB disconnect, device number 2
cdc_acm 5-1:1.1: urb 6 failed submission with -19
cdc_acm 5-1:1.0: failed to set dtr/rts
usb 5-1: new high-speed USB device number 3 using xhci_hcd
cdc_acm 5-1:1.0: ttyACM0: USB ACM device
usb-storage 5-1:1.3: USB Mass Storage device detected
scsi host13: usb-storage 5-1:1.3
scsi 13:0:0:0: Direct-Access LGE Android Platform 0000 PQ: 0 ANSI: 2
scsi 13:0:0:1: Direct-Access LGE Android Platform 0000 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] 61882317 512-byte logical blocks: (31.7 GB/29.5 GiB)
sd 13:0:0:1: Attached scsi generic sg4 type 0
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 0f 00 00 00
sd 13:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 13:0:0:1: [sde] Attached SCSI removable disk
sdd:
sd 13:0:0:0: [sdd] Attached SCSI removable disk
FAT-fs (sdd): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 114
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.2.1: new high-speed USB device number 69 using ehci-pci
usb-storage 1-1.2.1:1.0: USB Mass Storage device detected
scsi host14: usb-storage 1-1.2.1:1.0
scsi 14:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G PMAP PQ: 0 ANSI: 4
sd 14:0:0:0: Attached scsi generic sg5 type 0
sd 14:0:0:0: [sdf] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 14:0:0:0: [sdf] Write Protect is off
sd 14:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 14:0:0:0: [sdf] No Caching mode page found
sd 14:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1 sdf2
sd 14:0:0:0: [sdf] Attached SCSI removable disk
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 512 failed
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 1024 failed
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 512 failed
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 1024 failed
UDF-fs: INFO Mounting volume 'CLDX-20170630', timestamp 2017/06/30 14:24 (1000)
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.2.1: USB disconnect, device number 69
usb 1-1.2.1: new high-speed USB device number 71 using ehci-pci
usb-storage 1-1.2.1:1.0: USB Mass Storage device detected
scsi host14: usb-storage 1-1.2.1:1.0
usb 1-1.1: USB disconnect, device number 70
scsi 14:0:0:0: Direct-Access UFD 2.0 Silicon-Power16G PMAP PQ: 0 ANSI: 4
sd 14:0:0:0: Attached scsi generic sg5 type 0
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
sd 14:0:0:0: [sdf] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 14:0:0:0: [sdf] Write Protect is off
sd 14:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 14:0:0:0: [sdf] No Caching mode page found
sd 14:0:0:0: [sdf] Assuming drive cache: write through
sdf: sdf1 sdf2
sd 14:0:0:0: [sdf] Attached SCSI removable disk
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 512 failed
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 1024 failed
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 512 failed
UDF-fs: warning (device sdf1): udf_load_vrs: No anchor found
UDF-fs: Scanning with blocksize 1024 failed
UDF-fs: INFO Mounting volume 'CLDX-20170630', timestamp 2017/06/30 14:24 (1000)
usb 1-1.2.1: USB disconnect, device number 71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 5-2: new high-speed USB device number 4 using xhci_hcd
usb-storage 5-2:1.0: USB Mass Storage device detected
scsi host14: usb-storage 5-2:1.0
scsi 14:0:0:0: Direct-Access TS-RDF5 SD Transcend TS37 PQ: 0 ANSI: 6
sd 14:0:0:0: Attached scsi generic sg5 type 0
sd 14:0:0:0: [sdf] 61863936 512-byte logical blocks: (31.7 GB/29.5 GiB)
sd 14:0:0:0: [sdf] Write Protect is off
sd 14:0:0:0: [sdf] Mode Sense: 23 00 00 00
sd 14:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdf: sdf1
sd 14:0:0:0: [sdf] Attached SCSI removable disk
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 87
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 89
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 90
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 97
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 98
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 114
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 87
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 88
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
usb 1-1.1: reset high-speed USB device number 89 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 89
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 90
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 91 using ehci-pci
usb 1-1.1: reset high-speed USB device number 91 using ehci-pci
usb 1-1.1: reset high-speed USB device number 91 using ehci-pci
usb 1-1.1: reset high-speed USB device number 91 using ehci-pci
usb 1-1.1: reset high-speed USB device number 91 using ehci-pci
usb 1-1.1: reset high-speed USB device number 91 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
usb 1-1.1: reset high-speed USB device number 94 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 94
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 95
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller _nv000788rm+0x165/0x1b0 [nvidia] mapping multiple BARs
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 16 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 38 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 42 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: reset high-speed USB device number 43 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 44
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 53 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: reset high-speed USB device number 62 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 82 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host15: usb-storage 1-1.1:1.0
scsi 15:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 85 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 86
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 98
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 5-1: USB disconnect, device number 3
cdc_acm 5-1:1.0: failed to set dtr/rts
cdc_acm 5-1:1.1: urb 5 failed submission with -19
sd 13:0:0:0: [sdd] Synchronizing SCSI cache
sd 13:0:0:0: [sdd] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 114
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 116 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 116
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 66 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 67 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 85 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 87
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 88
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 89
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 90
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 96 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 97
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 98
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 114
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: reset high-speed USB device number 14 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 21 using ehci-pci
usb 1-1.1: reset high-speed USB device number 21 using ehci-pci
usb 1-1.1: reset high-speed USB device number 21 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 22 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 23 using ehci-pci
usb 1-1.1: reset high-speed USB device number 23 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 24 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 25
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 38 using ehci-pci
usb 1-1.1: reset high-speed USB device number 38 using ehci-pci
usb 1-1.1: reset high-speed USB device number 38 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 38
scsi 13:0:0:0: rejecting I/O to offline device
scsi 13:0:0:0: killing request
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 88
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 89
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 90
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 97
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 114
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/start: -61
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
wlp0s29u1u6: deauthenticating from a8:f9:4b:6a:7d:a7 by local choice (Reason: 3=DEAUTH_LEAVING)
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
PM: suspend entry (deep)
PM: Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
Suspending console(s) (use no_console_suspend to debug)
sd 6:0:0:0: [sdc] Synchronizing SCSI cache
sd 4:0:0:0: [sdb] Stopping disk
sd 6:0:0:0: [sdc] Stopping disk
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
serial 00:07: disabled
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
tg3 0000:04:00.0 enp4s0: Link is down
usb usb5: root hub lost power or was reset
usb usb6: root hub lost power or was reset
sd 2:0:0:0: [sda] Starting disk
sd 4:0:0:0: [sdb] Starting disk
sd 6:0:0:0: [sdc] Starting disk
serial 00:07: activated
ata12: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 5-2: reset high-speed USB device number 4 using xhci_hcd
OOM killer enabled.
Restarting tasks ...
pci_bus 0000:06: Allocating resources
pci 0000:05:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
pci 0000:05:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:05:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
pci 0000:05:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
pci 0000:05:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new full-speed USB device number 80 using ehci-pci
firewire_core 0000:06:01.2: rediscovered device fw0
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
tg3 0000:04:00.0 enp4s0: Link is up at 10 Mbps, half duplex
tg3 0000:04:00.0 enp4s0: Flow control is off for TX and off for RX
tg3 0000:04:00.0 enp4s0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u6: link is not ready
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/133
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata7.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata7.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
wlp0s29u1u6: authenticate with a8:f9:4b:6a:7d:a7
wlp0s29u1u6: send auth to a8:f9:4b:6a:7d:a7 (try 1/3)
wlp0s29u1u6: authenticated
wlp0s29u1u6: associate with a8:f9:4b:6a:7d:a7 (try 1/3)
wlp0s29u1u6: RX AssocResp from a8:f9:4b:6a:7d:a7 (capab=0x431 status=0 aid=3)
wlp0s29u1u6: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u6: link becomes ready
ata7.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
ata7.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata7.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata7.00: configured for UDMA/100
ata5: link is slow to respond, please be patient (ready=0)
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
ata5: COMRESET failed (errno=-16)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata5.00: configured for UDMA/133
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
resource sanity check: requesting [mem 0x000a0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000a0000-0x000bffff window]
caller _nv000788rm+0x165/0x1b0 [nvidia] mapping multiple BARs
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 87
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 88
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 89
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 90
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 97
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 98
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 109 using ehci-pci
usb 1-1.1: reset high-speed USB device number 109 using ehci-pci
usb 1-1.1: reset high-speed USB device number 109 using ehci-pci
usb 1-1.1: reset high-speed USB device number 109 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 121 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 7 using ehci-pci
usb 1-1.1: reset high-speed USB device number 7 using ehci-pci
usb 1-1.1: reset high-speed USB device number 7 using ehci-pci
usb 1-1.1: reset high-speed USB device number 7 using ehci-pci
usb 1-1.1: reset high-speed USB device number 7 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 8 using ehci-pci
usb 1-1.1: reset high-speed USB device number 8 using ehci-pci
usb 1-1.1: reset high-speed USB device number 8 using ehci-pci
usb 1-1.1: reset high-speed USB device number 8 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 9 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 9
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
sd 13:0:0:0: [sdd] 0-byte physical blocks
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 00 00 00 00
sd 13:0:0:0: [sdd] Asking for cache data failed
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: unable to read config index 0 descriptor/all
usb 1-1.1: can't read configurations, error -61
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 79 using ehci-pci
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 79 using ehci-pci
usb 1-1.1: reset high-speed USB device number 79 using ehci-pci
usb 1-1.1: reset high-speed USB device number 79 using ehci-pci
usb 1-1.1: reset high-speed USB device number 79 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 83 using ehci-pci
usb 1-1.1: reset high-speed USB device number 83 using ehci-pci
usb 1-1.1: reset high-speed USB device number 83 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 84
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 87
usb 1-1.1: new high-speed USB device number 88 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 88
usb 1-1.1: new high-speed USB device number 89 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 89
usb 1-1.1: new high-speed USB device number 90 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 90
usb 1-1.1: new high-speed USB device number 91 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 91
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 95 using ehci-pci
usb 1-1.1: reset high-speed USB device number 95 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 96
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 108 using ehci-pci
usb 1-1.1: reset high-speed USB device number 108 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 109 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 110
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 115
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 119 using ehci-pci
usb 1-1.1: reset high-speed USB device number 119 using ehci-pci
usb 1-1.1: reset high-speed USB device number 119 using ehci-pci
usb 1-1.1: reset high-speed USB device number 119 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 126 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 126
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
sd 13:0:0:0: [sdd] 0-byte physical blocks
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 00 00 00 00
sd 13:0:0:0: [sdd] Asking for cache data failed
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 127 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 127
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
sd 13:0:0:0: [sdd] 0-byte physical blocks
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 00 00 00 00
sd 13:0:0:0: [sdd] Asking for cache data failed
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: reset high-speed USB device number 4 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 22 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 24
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 25 using ehci-pci
usb 1-1.1: reset high-speed USB device number 25 using ehci-pci
usb 1-1.1: reset high-speed USB device number 25 using ehci-pci
usb 1-1.1: reset high-speed USB device number 25 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 26 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 27
usb 1-1.1: new high-speed USB device number 28 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 28
usb 1-1.1: new high-speed USB device number 29 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 29
usb 1-1.1: new high-speed USB device number 30 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 30
usb 1-1.1: new high-speed USB device number 31 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 31
usb 1-1.1: new high-speed USB device number 32 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 32
usb 1-1.1: new high-speed USB device number 33 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 33
usb 1-1.1: new high-speed USB device number 34 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 34
usb 1-1.1: new high-speed USB device number 35 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 35
usb 1-1.1: new high-speed USB device number 36 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 36
usb 1-1.1: new high-speed USB device number 37 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 37
usb 1-1.1: new high-speed USB device number 38 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 38 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 38
usb 1-1.1: new high-speed USB device number 39 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 39
usb 1-1.1: new high-speed USB device number 40 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 40
usb 1-1.1: new high-speed USB device number 41 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 41
usb 1-1.1: new high-speed USB device number 42 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 42
usb 1-1.1: new high-speed USB device number 43 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 43
usb 1-1.1: new high-speed USB device number 44 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 44
usb 1-1.1: new high-speed USB device number 45 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 45
usb 1-1.1: new high-speed USB device number 46 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 46
usb 1-1.1: new high-speed USB device number 47 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 47
usb 1-1.1: new high-speed USB device number 48 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 48
usb 1-1.1: new high-speed USB device number 49 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 49
usb 1-1.1: new high-speed USB device number 50 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 50
usb 1-1.1: new high-speed USB device number 51 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 51
usb 1-1.1: new high-speed USB device number 52 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 52
usb 1-1.1: new high-speed USB device number 53 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 53
usb 1-1.1: new high-speed USB device number 54 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 54
usb 1-1.1: new high-speed USB device number 55 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 55
usb 1-1.1: new high-speed USB device number 56 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 56
usb 1-1.1: new high-speed USB device number 57 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 57
usb 1-1.1: new high-speed USB device number 58 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 58
usb 1-1.1: new high-speed USB device number 59 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 59
usb 1-1.1: new high-speed USB device number 60 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 60
usb 1-1.1: new high-speed USB device number 61 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 61
usb 1-1.1: new high-speed USB device number 62 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 62
usb 1-1.1: new high-speed USB device number 63 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 63
usb 1-1.1: new high-speed USB device number 64 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 64
usb 1-1.1: new high-speed USB device number 65 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 65
usb 1-1.1: new high-speed USB device number 66 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 66
usb 1-1.1: new high-speed USB device number 67 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 67
usb 1-1.1: new high-speed USB device number 68 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 68
usb 1-1.1: new high-speed USB device number 69 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 69
usb 1-1.1: new high-speed USB device number 70 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 70
usb 1-1.1: new high-speed USB device number 71 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 71 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 71
usb 1-1.1: new high-speed USB device number 72 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 72
usb 1-1.1: new high-speed USB device number 73 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 73
usb 1-1.1: new high-speed USB device number 74 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 74
usb 1-1.1: new high-speed USB device number 75 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 75
usb 1-1.1: new high-speed USB device number 76 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 76
usb 1-1.1: new high-speed USB device number 77 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 77
usb 1-1.1: new high-speed USB device number 78 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 78
usb 1-1.1: new high-speed USB device number 79 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 79
usb 1-1.1: new high-speed USB device number 80 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 80
usb 1-1.1: new high-speed USB device number 81 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 81
usb 1-1.1: new high-speed USB device number 82 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 82
usb 1-1.1: new high-speed USB device number 83 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 83
usb 1-1.1: new high-speed USB device number 84 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: reset high-speed USB device number 84 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 84
usb 1-1.1: new high-speed USB device number 85 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 85
usb 1-1.1: new high-speed USB device number 86 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
usb 1-1.1: reset high-speed USB device number 86 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 86
usb 1-1.1: new high-speed USB device number 87 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 87
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: Cannot enable. Maybe the USB cable is bad?
usb 1-1-port1: unable to enumerate USB device
usb 1-1.1: new high-speed USB device number 92 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 92
usb 1-1.1: new high-speed USB device number 93 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 93
usb 1-1.1: new high-speed USB device number 94 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
JFS: nTxBlock = 8192, nTxLock = 65536
NILFS version 2 loaded
SGI XFS with ACLs, security attributes, realtime, no debug enabled
usb 1-1.1: USB disconnect, device number 94
usb 1-1.1: new high-speed USB device number 95 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 95
usb 1-1.1: new high-speed USB device number 96 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 96
usb 1-1.1: new high-speed USB device number 97 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 97
usb 1-1.1: new high-speed USB device number 98 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 98
usb 1-1.1: new high-speed USB device number 99 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 99
usb 1-1.1: new high-speed USB device number 100 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 100
usb 1-1.1: new high-speed USB device number 101 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 101
usb 1-1.1: new high-speed USB device number 102 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 102
usb 1-1.1: new high-speed USB device number 103 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 103
usb 1-1.1: new high-speed USB device number 104 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 104
usb 1-1.1: new high-speed USB device number 105 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 105
usb 1-1.1: new high-speed USB device number 106 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 106
usb 1-1.1: new high-speed USB device number 107 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 107
usb 1-1.1: new high-speed USB device number 108 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 108
usb 1-1.1: new high-speed USB device number 109 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 109
usb 1-1.1: new high-speed USB device number 110 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 110
usb 1-1.1: new high-speed USB device number 111 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 111
usb 1-1.1: new high-speed USB device number 112 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 112
usb 1-1.1: new high-speed USB device number 113 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 113
usb 1-1.1: new high-speed USB device number 114 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 114
usb 1-1.1: new high-speed USB device number 115 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 115 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 115
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] 0 512-byte logical blocks: (0 B/0 B)
sd 13:0:0:0: [sdd] 0-byte physical blocks
sd 13:0:0:0: [sdd] Write Protect is off
sd 13:0:0:0: [sdd] Mode Sense: 00 00 00 00
sd 13:0:0:0: [sdd] Asking for cache data failed
sd 13:0:0:0: [sdd] Assuming drive cache: write through
sd 13:0:0:0: [sdd] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
sd 13:0:0:0: [sdd] Sense not available.
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 116 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 116
usb 1-1.1: new high-speed USB device number 117 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 117
usb 1-1.1: new high-speed USB device number 118 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 118
usb 1-1.1: new high-speed USB device number 119 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 119
usb 1-1.1: new high-speed USB device number 120 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 120
usb 1-1.1: new high-speed USB device number 121 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 121
usb 1-1.1: new high-speed USB device number 122 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 122
usb 1-1.1: new high-speed USB device number 123 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 123
usb 1-1.1: new high-speed USB device number 124 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 124
usb 1-1.1: new high-speed USB device number 125 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 125
usb 1-1.1: new high-speed USB device number 126 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 126
usb 1-1.1: new high-speed USB device number 127 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 127
usb 1-1.1: new high-speed USB device number 3 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 4 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 4
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 6
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: new high-speed USB device number 8 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 8
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 9
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 11
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 13
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 15
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 16
usb 1-1.1: new high-speed USB device number 17 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 17
usb 1-1.1: new high-speed USB device number 18 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 18
usb 1-1.1: new high-speed USB device number 19 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: reset high-speed USB device number 19 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 19
usb 1-1.1: new high-speed USB device number 20 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 20
usb 1-1.1: new high-speed USB device number 21 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 21
usb 1-1.1: new high-speed USB device number 22 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 22
usb 1-1.1: new high-speed USB device number 23 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -75
usb 1-1-port1: disabled by hub (EMI?), re-enabling...
usb 1-1.1: USB disconnect, device number 23
usb 1-1.1: new high-speed USB device number 24 using ehci-pci
usb-storage 1-1.1:1.0: USB Mass Storage device detected
scsi host13: usb-storage 1-1.1:1.0
scsi 13:0:0:0: Direct-Access Generic Storage Device 0.00 PQ: 0 ANSI: 2
sd 13:0:0:0: Attached scsi generic sg3 type 0
usb 1-1.1: reset high-speed USB device number 24 using ehci-pci
usb 1-1.1: device firmware changed
usb 1-1.1: USB disconnect, device number 24
sd 13:0:0:0: [sdd] Attached SCSI removable disk
usb 1-1.1: new high-speed USB device number 25 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 25
usb 1-1.1: new high-speed USB device number 26 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71
usb 1-1.1: USB disconnect, device number 26
usb 1-1.1: new high-speed USB device number 27 using ehci-pci
usb 1-1.1: string descriptor 0 read error: -71
usb 1-1.1: can't set config #1, error -71