dmesg - 18k4kbarrier-flushes
random: get_random_bytes called from start_kernel+0x42/0x4ff with crng_init=0
Linux version 4.13.0-16-generic (buildd@lgw01-amd64-013) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4)) #19~16.04.3-Ubuntu SMP Mon Oct 16 18:59:33 UTC 2017 (Ubuntu 4.13.0-16.19~16.04.3-generic 4.13.4)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=/dev/sda2 ro noquiet nosplash net.ifnames=0 biosdevname=0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000079fc6fff] usable
BIOS-e820: [mem 0x0000000079fc7000-0x000000007a0c6fff] reserved
BIOS-e820: [mem 0x000000007a0c7000-0x000000007a1c6fff] type 20
BIOS-e820: [mem 0x000000007a1c7000-0x000000007ac52fff] reserved
BIOS-e820: [mem 0x000000007ac53000-0x000000007b682fff] ACPI NVS
BIOS-e820: [mem 0x000000007b683000-0x000000007b7ccfff] ACPI data
BIOS-e820: [mem 0x000000007b7cd000-0x000000007b7fffff] usable
BIOS-e820: [mem 0x000000007b800000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by EDK II BIOS ID:SE5C610.86B.01.01.3021.051020171131
efi: SMBIOS=0x7a0c3000 ACPI=0x7b7cc000 ACPI 2.0=0x7b7cc014
random: fast init done
SMBIOS 2.7 present.
DMI: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.3021.051020171131 05/10/2017
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff968e40097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x13b8323000, 0x13b8323fff] PGTABLE
BRK [0x13b8324000, 0x13b8324fff] PGTABLE
BRK [0x13b8325000, 0x13b8325fff] PGTABLE
BRK [0x13b8326000, 0x13b8326fff] PGTABLE
BRK [0x13b8327000, 0x13b8327fff] PGTABLE
BRK [0x13b8328000, 0x13b8328fff] PGTABLE
BRK [0x13b8329000, 0x13b8329fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x32636000-0x35312fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B7CC014 000024 (v02 INTEL )
ACPI: XSDT 0x000000007B7CB0E8 0000AC (v01 INTEL S2600CW 00000000 INTL 01000013)
ACPI: FACP 0x000000007B7CA000 0000F4 (v04 INTEL S2600CW 00000000 INTL 20091013)
ACPI: DSDT 0x000000007B792000 032DA6 (v02 INTEL S2600CW 00000003 INTL 20091013)
ACPI: FACS 0x000000007B662000 000040
ACPI: HPET 0x000000007B7C9000 000038 (v01 INTEL S2600CW 00000001 INTL 20091013)
ACPI: APIC 0x000000007B7C8000 000AFC (v03 INTEL S2600CW 00000000 INTL 20091013)
ACPI: MCFG 0x000000007B7C7000 00003C (v01 INTEL S2600CW 00000001 INTL 20091013)
ACPI: SPMI 0x000000007B7C6000 000041 (v05 INTEL S2600CW 00000001 INTL 20091013)
ACPI: WDDT 0x000000007B7C5000 000040 (v01 INTEL S2600CW 00000000 INTL 20091013)
ACPI: NITR 0x000000007B6A7000 000071 (v02 INTEL S2600CW 00000001 INTL 20091013)
ACPI: PRAD 0x000000007B6A2000 000102 (v02 INTEL SpsPrAgg 00000002 INTL 20130328)
ACPI: DMAR 0x000000007B69D000 0000A0 (v01 INTEL S2600CW 00000001 INTL 20091013)
ACPI: UEFI 0x000000007B677000 000042 (v01 INTEL S2600CW 00000002 INTL 01000013)
ACPI: SSDT 0x000000007B6A8000 0E96B0 (v02 INTEL S2600CW 00004000 INTL 20130328)
ACPI: SSDT 0x000000007B6A4000 002679 (v02 INTEL S2600CW 00000002 INTL 20130328)
ACPI: SSDT 0x000000007B6A3000 000064 (v02 INTEL S2600CW 00000002 INTL 20130328)
ACPI: HEST 0x000000007B6A1000 0000A8 (v01 INTEL S2600CW 00000001 INTL 00000001)
ACPI: BERT 0x000000007B6A0000 000030 (v01 INTEL S2600CW 00000001 INTL 00000001)
ACPI: ERST 0x000000007B69F000 000230 (v01 INTEL S2600CW 00000001 INTL 00000001)
ACPI: EINJ 0x000000007B69E000 000130 (v01 INTEL S2600CW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000207fffffff]
NODE_DATA(0) allocated [mem 0x207ffd5000-0x207fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000207fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000079fc6fff]
node 0: [mem 0x000000007b7cd000-0x000000007b7fffff]
node 0: [mem 0x0000000100000000-0x000000207fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000207fffffff]
On node 0 totalpages: 33529753
DMA zone: 64 pages used for memmap
DMA zone: 1081 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7744 pages used for memmap
DMA32 zone: 495610 pages, LIFO batch:31
Normal zone: 516096 pages used for memmap
Normal zone: 33030144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x28] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x29] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x2f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x30] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x31] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x32] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x33] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x34] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x35] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x36] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x37] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x38] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x39] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x3f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x40] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x41] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x42] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x43] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x44] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x45] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x46] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x47] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x48] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x49] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x4a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x4b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x4c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x4d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x4e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x4f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x50] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x51] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x52] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x53] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x54] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x55] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x56] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x57] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x58] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x59] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x5a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x5b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x5c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x5d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x5e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x5f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x60] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x61] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x62] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x63] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x64] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x65] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x66] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x67] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x68] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x69] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x6a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x6b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x6c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x6d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x6e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x6f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x70] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x71] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x72] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x73] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x74] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x75] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x76] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x77] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x78] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x79] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x7f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x80] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x81] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x82] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x83] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x84] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x85] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x86] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x87] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x88] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x89] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x8a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x8b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x8c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x8d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x8f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x90] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x91] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x92] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x93] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x94] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x95] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x96] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x97] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x98] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x99] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x9a] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x9b] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x9c] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x9d] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x9e] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x9f] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa0] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa1] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa2] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa3] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa4] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa5] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa6] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa7] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa8] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xa9] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xaa] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xab] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xac] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xad] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xae] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xaf] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb0] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb1] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb2] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb3] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb4] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb5] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb6] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb7] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb8] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xb9] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xba] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xbb] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xbc] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xbd] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xbe] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0xbf] high level lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x79fc7000-0x7a0c6fff]
PM: Registered nosave memory: [mem 0x7a0c7000-0x7a1c6fff]
PM: Registered nosave memory: [mem 0x7a1c7000-0x7ac52fff]
PM: Registered nosave memory: [mem 0x7ac53000-0x7b682fff]
PM: Registered nosave memory: [mem 0x7b683000-0x7b7ccfff]
PM: Registered nosave memory: [mem 0x7b800000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 39 pages/cpu @ffff96ae3f200000 s119704 r8192 d31848 u262144
pcpu-alloc: s119704 r8192 d31848 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 33004768
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=/dev/sda2 ro noquiet nosplash net.ifnames=0 biosdevname=0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 131799820K/134119012K available (9295K kernel code, 2476K rwdata, 4012K rodata, 2324K init, 2384K bss, 2319192K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 37720 entries in 148 pages
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 960, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.336 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.67 BogoMIPS (lpj=9577344)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 36K
smpboot: Max logical packages: 2
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007a3e4000 end: 0x0000007a3e6fff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (76618.75 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7ac53000-0x7b682fff] (10682368 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:35:20, date: 11/06/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x24 active on init
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [AER]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0x383ffff2c000-0x383ffff2ffff 64bit]
pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0x383ffff28000-0x383ffff2bfff 64bit]
pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0x383ffff24000-0x383ffff27fff 64bit]
pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0x383ffff20000-0x383ffff23fff 64bit]
pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0x383ffff1c000-0x383ffff1ffff 64bit]
pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0x383ffff18000-0x383ffff1bfff 64bit]
pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0x383ffff14000-0x383ffff17fff 64bit]
pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0x383ffff10000-0x383ffff13fff 64bit]
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0x91e05000-0x91e05fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0x4078-0x407f]
pci 0000:00:11.4: reg 0x14: [io 0x40ac-0x40af]
pci 0000:00:11.4: reg 0x18: [io 0x4070-0x4077]
pci 0000:00:11.4: reg 0x1c: [io 0x40a8-0x40ab]
pci 0000:00:11.4: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:11.4: reg 0x24: [mem 0x91e00000-0x91e007ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x383ffff00000-0x383ffff0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0x383ffff33000-0x383ffff3300f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0x383ffff32000-0x383ffff3200f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0x91e02000-0x91e023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0x91e01000-0x91e013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x40a0-0x40a7]
pci 0000:00:1f.2: reg 0x14: [io 0x40bc-0x40bf]
pci 0000:00:1f.2: reg 0x18: [io 0x4098-0x409f]
pci 0000:00:1f.2: reg 0x1c: [io 0x40b8-0x40bb]
pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f]
pci 0000:00:1f.2: reg 0x24: [mem 0x91e04000-0x91e047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x383ffff31000-0x383ffff310ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f]
pci 0000:01:00.0: [8086:1528] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [io 0x3020-0x303f]
pci 0000:01:00.0: reg 0x20: [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: reg 0x184: [mem 0x91a00000-0x91a03fff 64bit]
pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x91a00000-0x91afffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:01:00.0: reg 0x190: [mem 0x91b00000-0x91b03fff 64bit]
pci 0000:01:00.0: VF(n) BAR3 space: [mem 0x91b00000-0x91bfffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:01:00.1: [8086:1528] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
pci 0000:01:00.1: reg 0x18: [io 0x3000-0x301f]
pci 0000:01:00.1: reg 0x20: [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: reg 0x184: [mem 0x91c00000-0x91c03fff 64bit]
pci 0000:01:00.1: VF(n) BAR0 space: [mem 0x91c00000-0x91cfffff 64bit] (contains BAR0 for 64 VFs)
pci 0000:01:00.1: reg 0x190: [mem 0x91d00000-0x91d03fff 64bit]
pci 0000:01:00.1: VF(n) BAR3 space: [mem 0x91d00000-0x91dfffff 64bit] (contains BAR3 for 64 VFs)
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0x91a00000-0x91dfffff]
pci 0000:00:01.0: bridge window [mem 0x383fffa00000-0x383fffefffff 64bit pref]
pci 0000:03:00.0: [1000:005b] type 00 class 0x010400
pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 0x14: [mem 0x91940000-0x91943fff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0x91900000-0x9193ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0x91900000-0x919fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [102b:0522] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0x90000000-0x90ffffff pref]
pci 0000:06:00.0: reg 0x14: [mem 0x91800000-0x91803fff]
pci 0000:06:00.0: reg 0x18: [mem 0x91000000-0x917fffff]
pci 0000:06:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [mem 0x91000000-0x918fffff]
pci 0000:00:1c.3: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:06:00.0: vgaarb: setting as boot VGA device
pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:06:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x79fc7000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b800000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x053f] has been reserved
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0540-0x057f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0ca0-0x0ca5] could not be reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:06:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0x91a00000-0x91dfffff]
pci 0000:00:01.0: bridge window [mem 0x383fffa00000-0x383fffefffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0x91960000-0x9197ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.0: bridge window [mem 0x91900000-0x919fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:06:00.0: BAR 6: assigned [mem 0x91810000-0x9181ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3: bridge window [mem 0x91000000-0x918fffff]
pci 0000:00:1c.3: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: resource 8 [mem 0x380000000000-0x383fffffffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0x91a00000-0x91dfffff]
pci_bus 0000:01: resource 2 [mem 0x383fffa00000-0x383fffefffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x91900000-0x919fffff]
pci_bus 0000:06: resource 1 [mem 0x91000000-0x918fffff]
pci_bus 0000:06: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 45940K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x70e44000-0x74e44000] (64MB) mapped at [ffff968eb0e44000-ffff968eb4e43fff]
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1509975321.150:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME with IRQ 25
pcieport 0000:00:02.0: Signaling PME with IRQ 26
pcieport 0000:00:03.0: Signaling PME with IRQ 27
pcieport 0000:00:1c.0: Signaling PME with IRQ 28
pcieport 0000:00:1c.3: Signaling PME with IRQ 29
efifb: probing for efifb
efifb: framebuffer at 0x90000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0x91e02000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.13.0-16-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0x91e01000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.13.0-16-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.13.0-16-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found.
usb 1-1: new high-speed USB device number 2 using ehci-pci
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
usb 2-1: new high-speed USB device number 2 using ehci-pci
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
intel_rdt: Intel RDT L3 monitoring detected
RAS: Correctable Errors collector initialized.
microcode: sig=0x306f2, pf=0x1, revision=0x3a
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1874822930, 0)->(1990080096, -115257166)
registered taskstats version 1
usb 3-14: new full-speed USB device number 2 using xhci_hcd
Loading compiled-in X.509 certificates
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
Loaded X.509 cert 'Build time autogenerated kernel key: d19ff0d627b2eb06cd3f29ecf6d09487525e7dac'
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI db list
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI MokListRT
Couldn't get size: 0x800000000000000e
MODSIGN: Couldn't get UEFI dbx list
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
usb 3-14: New USB device found, idVendor=046b, idProduct=ff10
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14: Product: Virtual Keyboard and Mouse
usb 3-14: Manufacturer: American Megatrends Inc.
usb 3-14: SerialNumber: serial
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 9:887:583
pci_bus 0000:04: hash matches
acpi device:12e: hash matches
rtc_cmos 00:00: setting system clock to 2017-11-06 13:35:22 UTC (1509975322)
tsc: Refined TSC clocksource calibration: 2394.455 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c1579c6, max_idle_ns: 440795259439 ns
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2324K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 932K
Freeing unused kernel memory: 84K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
hidraw: raw HID events driver (C) Jiri Kosina
megasas: 07.701.17.00-rc1
megaraid_sas 0000:03:00.0: FW now in Ready state
megaraid_sas 0000:03:00.0: firmware supports msix : (16)
megaraid_sas 0000:03:00.0: current msix/online cpus : (16/16)
megaraid_sas 0000:03:00.0: RDPQ mode : (disabled)
megaraid_sas 0000:03:00.0: Current firmware maximum commands: 1008 LDIO threshold: 0
PTP clock support registered
megaraid_sas 0000:03:00.0: FW supports sync cache : No
ahci 0000:00:11.4: version 3.0
dca service started, version 1.12.1
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
megaraid_sas 0000:03:00.0: Init cmd success
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
ata1: SATA max UDMA/133 abar m2048@0x91e00000 port 0x91e00100 irq 47
ata2: SATA max UDMA/133 abar m2048@0x91e00000 port 0x91e00180 irq 47
ata3: SATA max UDMA/133 abar m2048@0x91e00000 port 0x91e00200 irq 47
ata4: SATA max UDMA/133 abar m2048@0x91e00000 port 0x91e00280 irq 47
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
megaraid_sas 0000:03:00.0: firmware type : Extended VD(240 VD)firmware
megaraid_sas 0000:03:00.0: controller type : MR(1024MB)
megaraid_sas 0000:03:00.0: Online Controller Reset(OCR) : Enabled
megaraid_sas 0000:03:00.0: Secure JBOD support : No
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
scsi host10: ahci
ata5: SATA max UDMA/133 abar m2048@0x91e04000 port 0x91e04100 irq 49
ata6: SATA max UDMA/133 abar m2048@0x91e04000 port 0x91e04180 irq 49
ata7: SATA max UDMA/133 abar m2048@0x91e04000 port 0x91e04200 irq 49
ata8: SATA max UDMA/133 abar m2048@0x91e04000 port 0x91e04280 irq 49
ata9: SATA max UDMA/133 abar m2048@0x91e04000 port 0x91e04300 irq 49
ata10: SATA max UDMA/133 abar m2048@0x91e04000 port 0x91e04380 irq 49
megaraid_sas 0000:03:00.0: INIT adapter done
megaraid_sas 0000:03:00.0: Jbod map is not supported megasas_setup_jbod_map 5095
megaraid_sas 0000:03:00.0: pci id : (0x1000)/(0x005b)/(0x1000)/(0x9276)
megaraid_sas 0000:03:00.0: unevenspan support : no
megaraid_sas 0000:03:00.0: firmware crash dump : no
megaraid_sas 0000:03:00.0: jbod sync map : no
scsi host0: Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access LSI MR9271-4i 3.46 PQ: 0 ANSI: 5
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:046B:FF10.0001/input/input1
hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-14/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.1/0003:046B:FF10.0002/input/input2
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
ixgbe: Copyright (c) 1999-2016 Intel Corporation.
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-14/input1
checking generic (90000000 300000) vs hw (90000000 1000000)
fb: switching to mgag200drmfb from EFI VGA
Console: switching to colour dummy device 80x25
[TTM] Zone kernel: Available graphics memory: 65967346 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
sd 0:2:0:0: Attached scsi generic sg0 type 0
sd 0:2:0:0: [sda] 7500398592 512-byte logical blocks: (3.84 TB/3.49 TiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 10 08
sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 sda3
sd 0:2:0:0: [sda] Attached SCSI disk
fbcon: mgadrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ixgbe 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 16 XDP Queue count = 0
clocksource: Switched to clocksource tsc
ixgbe 0000:01:00.0: PCI Express bandwidth of 32GT/s available
ixgbe 0000:01:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:01:00.0: MAC: 3, PHY: 0, PBA No: 000000-000
ixgbe 0000:01:00.0: 00:1e:67:cb:43:02
mgag200 0000:06:00.0: fb0: mgadrmfb frame buffer device
[drm] Initialized mgag200 1.0.0 20110418 for 0000:06:00.0 on minor 0
ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection
ixgbe 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 16, Tx Queue count = 16 XDP Queue count = 0
ixgbe 0000:01:00.1: PCI Express bandwidth of 32GT/s available
ixgbe 0000:01:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
ixgbe 0000:01:00.1: MAC: 3, PHY: 0, PBA No: 000000-000
ixgbe 0000:01:00.1: 00:1e:67:cb:43:03
ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection
raid6: sse2x1 gen() 9385 MB/s
raid6: sse2x1 xor() 7570 MB/s
raid6: sse2x2 gen() 12094 MB/s
raid6: sse2x2 xor() 8303 MB/s
raid6: sse2x4 gen() 14310 MB/s
raid6: sse2x4 xor() 10021 MB/s
raid6: avx2x1 gen() 18780 MB/s
raid6: avx2x1 xor() 14313 MB/s
raid6: avx2x2 gen() 21942 MB/s
raid6: avx2x2 xor() 15003 MB/s
raid6: avx2x4 gen() 25622 MB/s
raid6: avx2x4 xor() 11408 MB/s
raid6: using algorithm avx2x4 gen() 25622 MB/s
raid6: .... xor() 11408 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device fsid 9d8c21ce-7d3b-47b3-aaa2-5199e65768c9 devid 1 transid 8 /dev/sda3
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Journal Socket (/dev/log).
drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
drbd: srcversion: 2DCC561E7F1E3D63526E90D
drbd: registered as block device major 147
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[428]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi device interface
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
ipmi_si: ACPI-specified kcs state machine: duplicate
IPMI System Interface driver.
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: SPMI-specified kcs state machine: duplicate
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC MC0: Giving out device to module sb_edac.c controller Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT)
EDAC sbridge: Some needed devices are missing
EDAC MC: Removed device 0 for sb_edac.c Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0
EDAC sbridge: Couldn't find mci handler
EDAC sbridge: Failed to register device with error -19.
ipmi_si dmi-ipmi-si.0: Found new BMC (man_id: 0x000157, prod_id: 0x0071, dev_id: 0x21)
ipmi_si dmi-ipmi-si.0: IPMI kcs interface initialized
IPMI SSIF Interface driver
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
random: crng init done
audit: type=1400 audit(1509975332.438:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=969 comm="apparmor_parser"
audit: type=1400 audit(1509975332.475:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=970 comm="apparmor_parser"
audit: type=1400 audit(1509975332.484:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=979 comm="apparmor_parser"
audit: type=1400 audit(1509975332.485:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=980 comm="apparmor_parser"
audit: type=1400 audit(1509975332.549:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1509975332.550:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1509975332.550:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=978 comm="apparmor_parser"
audit: type=1400 audit(1509975332.550:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=978 comm="apparmor_parser"
pps pps0: new PPS source ptp0
ixgbe 0000:01:00.0: registered PHC device on eth0
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
pps pps1: new PPS source ptp1
ixgbe 0000:01:00.1: registered PHC device on eth1
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ixgbe 0000:01:00.1 eth1: NIC Link is Up 10 Gbps, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ixgbe 0000:01:00.0 eth0: NIC Link is Up 10 Gbps, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit: type=1400 audit(1509975370.071:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="docker-default" pid=2327 comm="apparmor_parser"
aufs 4.13-20170911
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffffb5fec280)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
drbd btrfs: Starting worker thread (from drbdsetup-84 [2591])
block drbd0: disk( Diskless -> Attaching )
drbd btrfs: Method to ensure write ordering: drain
block drbd0: max BIO size = 262144
block drbd0: drbd_bm_resize called with capacity == 7468404024
block drbd0: resync bitmap: bits=933550503 words=14586727 pages=28490
block drbd0: size = 3561 GB (3734202012 KB)
Initializing XFRM netlink socket
block drbd0: recounting of set bits took additional 4 jiffies
block drbd0: 3515 GB (921360551 bits) marked out-of-sync by on disk bit-map.
block drbd0: disk( Attaching -> UpToDate ) pdsk( DUnknown -> Outdated )
drbd btrfs: conn( StandAlone -> Unconnected )
drbd btrfs: Starting receiver thread (from drbd_w_btrfs [2594])
drbd btrfs: receiver (re)started
drbd btrfs: conn( Unconnected -> WFConnection )
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
drbd btrfs: Handshake successful: Agreed network protocol version 101
drbd btrfs: Feature flags enabled on protocol level: 0x7 TRIM THIN_RESYNC WRITE_SAME.
drbd btrfs: conn( WFConnection -> WFReportParams )
drbd btrfs: Starting ack_recv thread (from drbd_r_btrfs [2990])
block drbd0: drbd_sync_handshake:
block drbd0: self D9CBAA96F32DD800:E48CADC526BBB7ED:0000000000000004:0000000000000000 bits:921360551 flags:0
block drbd0: peer E48CADC526BBB7ED:0000000000000000:0000000000000000:0000000000000000 bits:921270927 flags:0
block drbd0: Becoming sync source due to disk states.
block drbd0: peer( Unknown -> Primary ) conn( WFReportParams -> WFBitMapS ) pdsk( Outdated -> Inconsistent )
block drbd0: send bitmap stats [Bytes(packets)]: plain 0(0), RLE 31(1), total 31; compression: 100.0%
aufs au_opts_verify:1584:dockerd[2383]: dirperm1 breaks the protection by the permission bits on the lower branch
block drbd0: receive bitmap stats [Bytes(packets)]: plain 0(0), RLE 47(1), total 47; compression: 100.0%
block drbd0: helper command: /sbin/drbdadm before-resync-source minor-0
block drbd0: helper command: /sbin/drbdadm before-resync-source minor-0 exit code 0 (0x0)
block drbd0: conn( WFBitMapS -> SyncSource )
block drbd0: Began resync as SyncSource (will sync 3685442620 KB [921360655 bits set]).
docker0: port 1(veth2c6df14) entered blocking state
docker0: port 1(veth2c6df14) entered disabled state
device veth2c6df14 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth2c6df14: link is not ready
docker0: port 1(veth2c6df14) entered blocking state
docker0: port 1(veth2c6df14) entered forwarding state
docker0: port 1(veth2c6df14) entered disabled state
eth0: renamed from veth62030e1
IPv6: ADDRCONF(NETDEV_CHANGE): veth2c6df14: link becomes ready
docker0: port 1(veth2c6df14) entered blocking state
docker0: port 1(veth2c6df14) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 1(veth2c6df14) entered disabled state
veth62030e1: renamed from eth0
docker0: port 1(veth2c6df14) entered disabled state
device veth2c6df14 left promiscuous mode
docker0: port 1(veth2c6df14) entered disabled state
block drbd0: Resync done (total 7601 sec; paused 0 sec; 484860 K/sec)
block drbd0: conn( SyncSource -> Connected ) pdsk( Inconsistent -> UpToDate )
docker0: port 1(vethd091f35) entered blocking state
docker0: port 1(vethd091f35) entered disabled state
device vethd091f35 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethd091f35: link is not ready
eth0: renamed from veth1715b46
IPv6: ADDRCONF(NETDEV_CHANGE): vethd091f35: link becomes ready
docker0: port 1(vethd091f35) entered blocking state
docker0: port 1(vethd091f35) entered forwarding state
docker0: port 1(vethd091f35) entered disabled state
veth1715b46: renamed from eth0
docker0: port 1(vethd091f35) entered disabled state
device vethd091f35 left promiscuous mode
docker0: port 1(vethd091f35) entered disabled state
docker0: port 1(veth6cb1d8a) entered blocking state
docker0: port 1(veth6cb1d8a) entered disabled state
device veth6cb1d8a entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth6cb1d8a: link is not ready
eth0: renamed from veth1108841
IPv6: ADDRCONF(NETDEV_CHANGE): veth6cb1d8a: link becomes ready
docker0: port 1(veth6cb1d8a) entered blocking state
docker0: port 1(veth6cb1d8a) entered forwarding state
docker0: port 1(veth6cb1d8a) entered disabled state
veth1108841: renamed from eth0
docker0: port 1(veth6cb1d8a) entered disabled state
device veth6cb1d8a left promiscuous mode
docker0: port 1(veth6cb1d8a) entered disabled state
drbd btrfs: peer( Primary -> Unknown ) conn( Connected -> TearDown ) pdsk( UpToDate -> DUnknown )
drbd btrfs: ack_receiver terminated
drbd btrfs: Terminating drbd_a_btrfs
drbd btrfs: Connection closed
drbd btrfs: conn( TearDown -> Unconnected )
drbd btrfs: receiver terminated
drbd btrfs: Restarting receiver thread
drbd btrfs: receiver (re)started
drbd btrfs: conn( Unconnected -> WFConnection )
block drbd0: role( Secondary -> Primary )
block drbd0: role( Primary -> Secondary )
block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
drbd btrfs: conn( WFConnection -> Disconnecting )
drbd btrfs: Discarding network configuration.
drbd btrfs: Connection closed
drbd btrfs: conn( Disconnecting -> StandAlone )
drbd btrfs: receiver terminated
drbd btrfs: Terminating drbd_r_btrfs
block drbd0: disk( UpToDate -> Failed )
block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
block drbd0: disk( Failed -> Diskless )
drbd btrfs: Terminating drbd_w_btrfs
drbd: module cleanup done.
drbd: initialized. Version: 8.4.7 (api:1/proto:86-101)
drbd: srcversion: 2DCC561E7F1E3D63526E90D
drbd: registered as block device major 147
drbd btrfs: Starting worker thread (from drbdsetup-84 [20241])
block drbd0: disk( Diskless -> Attaching )
drbd btrfs: Method to ensure write ordering: drain
block drbd0: max BIO size = 262144
block drbd0: drbd_bm_resize called with capacity == 7468404024
block drbd0: resync bitmap: bits=933550503 words=14586727 pages=28490
block drbd0: size = 3561 GB (3734202012 KB)
block drbd0: recounting of set bits took additional 5 jiffies
block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
block drbd0: disk( Attaching -> UpToDate )
drbd btrfs: conn( StandAlone -> Unconnected )
drbd btrfs: Starting receiver thread (from drbd_w_btrfs [20242])
drbd btrfs: receiver (re)started
drbd btrfs: conn( Unconnected -> WFConnection )
drbd btrfs: Handshake successful: Agreed network protocol version 101
drbd btrfs: Feature flags enabled on protocol level: 0x7 TRIM THIN_RESYNC WRITE_SAME.
drbd btrfs: conn( WFConnection -> WFReportParams )
drbd btrfs: Starting ack_recv thread (from drbd_r_btrfs [20246])
block drbd0: drbd_sync_handshake:
block drbd0: self 6EDB61597603DBCC:D9CBAA96F32DD800:E48DADC526BBB7ED:E48CADC526BBB7ED bits:0 flags:0
block drbd0: peer 4BC44CD761F3CE15:D9CBAA96F32DD801:E48DADC526BBB7ED:E48CADC526BBB7ED bits:0 flags:0
block drbd0: helper command: /sbin/drbdadm initial-split-brain minor-0
block drbd0: helper command: /sbin/drbdadm initial-split-brain minor-0 exit code 0 (0x0)
block drbd0: Split-Brain detected but unresolved, dropping connection!
block drbd0: helper command: /sbin/drbdadm split-brain minor-0
block drbd0: helper command: /sbin/drbdadm split-brain minor-0 exit code 0 (0x0)
drbd btrfs: conn( WFReportParams -> Disconnecting )
drbd btrfs: error receiving ReportState, e: -5 l: 0!
drbd btrfs: ack_receiver terminated
drbd btrfs: Terminating drbd_a_btrfs
drbd btrfs: Connection closed
drbd btrfs: conn( Disconnecting -> StandAlone )
drbd btrfs: receiver terminated
drbd btrfs: Terminating drbd_r_btrfs
drbd btrfs: conn( StandAlone -> Unconnected )
drbd btrfs: Starting receiver thread (from drbd_w_btrfs [20242])
drbd btrfs: receiver (re)started
drbd btrfs: conn( Unconnected -> WFConnection )
drbd btrfs: Handshake successful: Agreed network protocol version 101
drbd btrfs: Feature flags enabled on protocol level: 0x7 TRIM THIN_RESYNC WRITE_SAME.
drbd btrfs: conn( WFConnection -> WFReportParams )
drbd btrfs: Starting ack_recv thread (from drbd_r_btrfs [24735])
block drbd0: drbd_sync_handshake:
block drbd0: self 6EDB61597603DBCC:D9CBAA96F32DD800:E48DADC526BBB7ED:E48CADC526BBB7ED bits:0 flags:0
block drbd0: peer 4BC44CD761F3CE15:D9CBAA96F32DD801:E48DADC526BBB7ED:E48CADC526BBB7ED bits:0 flags:0
block drbd0: helper command: /sbin/drbdadm initial-split-brain minor-0
block drbd0: helper command: /sbin/drbdadm initial-split-brain minor-0 exit code 0 (0x0)
block drbd0: Split-Brain detected, 1 primaries, automatically solved. Sync from peer node
block drbd0: peer( Unknown -> Primary ) conn( WFReportParams -> WFBitMapT ) disk( UpToDate -> Outdated ) pdsk( DUnknown -> UpToDate )
block drbd0: receive bitmap stats [Bytes(packets)]: plain 0(0), RLE 23(1), total 23; compression: 100.0%
block drbd0: send bitmap stats [Bytes(packets)]: plain 0(0), RLE 23(1), total 23; compression: 100.0%
block drbd0: helper command: /sbin/drbdadm before-resync-target minor-0
block drbd0: helper command: /sbin/drbdadm before-resync-target minor-0 exit code 0 (0x0)
block drbd0: Began resync as SyncTarget (will sync 0 KB [0 bits set]).
block drbd0: Resync done (total 1 sec; paused 0 sec; 0 K/sec)
block drbd0: conn( SyncTarget -> Connected ) disk( Inconsistent -> UpToDate )
block drbd0: helper command: /sbin/drbdadm after-resync-target minor-0
block drbd0: helper command: /sbin/drbdadm after-resync-target minor-0 exit code 0 (0x0)
block drbd0: peer( Primary -> Secondary )
block drbd0: role( Secondary -> Primary )
BTRFS info (device drbd0): use ssd allocation scheme
BTRFS info (device drbd0): disk space caching is enabled
BTRFS info (device drbd0): has skinny extents
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 10-second grace period (net ffffffffb5fec280)
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 10-second grace period (net ffffffffb5fec280)
docker0: port 1(vethf65c5f6) entered blocking state
docker0: port 1(vethf65c5f6) entered disabled state
device vethf65c5f6 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethf65c5f6: link is not ready
eth0: renamed from veth1245d61
IPv6: ADDRCONF(NETDEV_CHANGE): vethf65c5f6: link becomes ready
docker0: port 1(vethf65c5f6) entered blocking state
docker0: port 1(vethf65c5f6) entered forwarding state
docker0: port 1(vethf65c5f6) entered disabled state
veth1245d61: renamed from eth0
docker0: port 1(vethf65c5f6) entered disabled state
device vethf65c5f6 left promiscuous mode
docker0: port 1(vethf65c5f6) entered disabled state
docker0: port 1(vethf2c0c34) entered blocking state
docker0: port 1(vethf2c0c34) entered disabled state
device vethf2c0c34 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethf2c0c34: link is not ready
eth0: renamed from vethe58233e
IPv6: ADDRCONF(NETDEV_CHANGE): vethf2c0c34: link becomes ready
docker0: port 1(vethf2c0c34) entered blocking state
docker0: port 1(vethf2c0c34) entered forwarding state
docker0: port 1(vethf2c0c34) entered disabled state
vethe58233e: renamed from eth0
docker0: port 1(vethf2c0c34) entered disabled state
device vethf2c0c34 left promiscuous mode
docker0: port 1(vethf2c0c34) entered disabled state
docker0: port 1(veth02c600d) entered blocking state
docker0: port 1(veth02c600d) entered disabled state
device veth02c600d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth02c600d: link is not ready
eth0: renamed from vethe636375
IPv6: ADDRCONF(NETDEV_CHANGE): veth02c600d: link becomes ready
docker0: port 1(veth02c600d) entered blocking state
docker0: port 1(veth02c600d) entered forwarding state
docker0: port 1(veth02c600d) entered disabled state
vethe636375: renamed from eth0
docker0: port 1(veth02c600d) entered disabled state
device veth02c600d left promiscuous mode
docker0: port 1(veth02c600d) entered disabled state
docker0: port 1(veth6958e89) entered blocking state
docker0: port 1(veth6958e89) entered disabled state
device veth6958e89 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth6958e89: link is not ready
eth0: renamed from vethec9a3df
IPv6: ADDRCONF(NETDEV_CHANGE): veth6958e89: link becomes ready
docker0: port 1(veth6958e89) entered blocking state
docker0: port 1(veth6958e89) entered forwarding state
perf: interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
docker0: port 1(veth6958e89) entered disabled state
vethec9a3df: renamed from eth0
docker0: port 1(veth6958e89) entered disabled state
device veth6958e89 left promiscuous mode
docker0: port 1(veth6958e89) entered disabled state
docker0: port 1(veth64fdedb) entered blocking state
docker0: port 1(veth64fdedb) entered disabled state
device veth64fdedb entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth64fdedb: link is not ready
eth0: renamed from veth72ecd09
IPv6: ADDRCONF(NETDEV_CHANGE): veth64fdedb: link becomes ready
docker0: port 1(veth64fdedb) entered blocking state
docker0: port 1(veth64fdedb) entered forwarding state
docker0: port 1(veth64fdedb) entered disabled state
veth72ecd09: renamed from eth0
docker0: port 1(veth64fdedb) entered disabled state
device veth64fdedb left promiscuous mode
docker0: port 1(veth64fdedb) entered disabled state
drbd btrfs: Method to ensure write ordering: flush
docker0: port 1(veth4adca91) entered blocking state
docker0: port 1(veth4adca91) entered disabled state
device veth4adca91 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth4adca91: link is not ready
eth0: renamed from vethc232bc8
IPv6: ADDRCONF(NETDEV_CHANGE): veth4adca91: link becomes ready
docker0: port 1(veth4adca91) entered blocking state
docker0: port 1(veth4adca91) entered forwarding state
docker0: port 1(veth4adca91) entered disabled state
vethc232bc8: renamed from eth0
docker0: port 1(veth4adca91) entered disabled state
device veth4adca91 left promiscuous mode
docker0: port 1(veth4adca91) entered disabled state
docker0: port 1(veth07bde7f) entered blocking state
docker0: port 1(veth07bde7f) entered disabled state
device veth07bde7f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth07bde7f: link is not ready
eth0: renamed from veth9a0a412
IPv6: ADDRCONF(NETDEV_CHANGE): veth07bde7f: link becomes ready
docker0: port 1(veth07bde7f) entered blocking state
docker0: port 1(veth07bde7f) entered forwarding state