dmesg - OL68-UCSB
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.12-37.4.1.el6uek.x86_64 (mockbuild@x86-ol6-builder-05) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-11) (GCC) ) #2 SMP Tue May 17 07:23:38 PDT 2016
Command line: ro root=/dev/mapper/PQ00-root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=PQ01/swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=PQ00/root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet numa=off transparent_hugepage=never
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000077f01fff] usable
BIOS-e820: [mem 0x0000000077f02000-0x000000007b7fffff] reserved
BIOS-e820: [mem 0x000000007b800000-0x000000007ee9cfff] usable
BIOS-e820: [mem 0x000000007ee9d000-0x000000007eeccfff] reserved
BIOS-e820: [mem 0x000000007eecd000-0x000000007efdffff] ACPI data
BIOS-e820: [mem 0x000000007efe0000-0x000000007f1f9fff] ACPI NVS
BIOS-e820: [mem 0x000000007f1fa000-0x000000007f27bfff] reserved
BIOS-e820: [mem 0x000000007f27c000-0x000000007f29ffff] usable
BIOS-e820: [mem 0x000000007f2a0000-0x000000007f2a1fff] reserved
BIOS-e820: [mem 0x000000007f2a2000-0x000000007f2a2fff] usable
BIOS-e820: [mem 0x000000007f2a3000-0x000000007f328fff] ACPI NVS
BIOS-e820: [mem 0x000000007f329000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000307fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.6c.0.110420151250 11/04/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x3080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FE000000000 write-back
1 base 002000000000 mask 3FF000000000 write-back
2 base 003000000000 mask 3FFF80000000 write-back
3 base 000080000000 mask 3FFF80000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 128GB, range: 64GB, type WB
reg 2, base: 192GB, range: 2GB, type WB
reg 3, base: 2GB, range: 2GB, type UC
total RAM covered: 196608M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 32GB, type WB
reg 5, base: 64GB, range: 64GB, type WB
reg 6, base: 128GB, range: 64GB, type WB
reg 7, base: 192GB, range: 2GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8800000fda90]
Base memory trampoline at [ffff880000097000] 97000 size 28672
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0207e000, 0x0207efff] PGTABLE
BRK [0x0207f000, 0x0207ffff] PGTABLE
BRK [0x02080000, 0x02080fff] PGTABLE
init_memory_mapping: [mem 0x307fe00000-0x307fffffff]
[mem 0x307fe00000-0x307fffffff] page 1G
init_memory_mapping: [mem 0x3060000000-0x307fdfffff]
[mem 0x3060000000-0x307fdfffff] page 1G
init_memory_mapping: [mem 0x2000000000-0x305fffffff]
[mem 0x2000000000-0x305fffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x77f01fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x77dfffff] page 2M
[mem 0x77e00000-0x77f01fff] page 4k
init_memory_mapping: [mem 0x7b800000-0x7ee9cfff]
[mem 0x7b800000-0x7edfffff] page 2M
[mem 0x7ee00000-0x7ee9cfff] page 4k
BRK [0x02081000, 0x02081fff] PGTABLE
init_memory_mapping: [mem 0x7f27c000-0x7f29ffff]
[mem 0x7f27c000-0x7f29ffff] page 4k
BRK [0x02082000, 0x02082fff] PGTABLE
init_memory_mapping: [mem 0x7f2a2000-0x7f2a2fff]
[mem 0x7f2a2000-0x7f2a2fff] page 4k
init_memory_mapping: [mem 0x7f329000-0x7f7fffff]
[mem 0x7f329000-0x7f3fffff] page 4k
[mem 0x7f400000-0x7f7fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x1fffffffff]
[mem 0x100000000-0x1fffffffff] page 1G
RAMDISK: [mem 0x354b2000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 Cisco )
ACPI: XSDT 0x000000007EF04090 00009C (v01 Cisco CiscoUCS 00000000 AMI 00010013)
ACPI: FACP 0x000000007EF0DB28 00010C (v05 Cisco CiscoUCS 00000000 AMI 00010013)
ACPI: DSDT 0x000000007EF041B8 00996A (v02 Cisco CiscoUCS 00000000 INTL 20091112)
ACPI: FACS 0x000000007F1F1080 000040
ACPI: APIC 0x000000007EF0DC38 000224 (v03 Cisco CiscoUCS 00000000 AMI 00010013)
ACPI: FPDT 0x000000007EF0DE60 000044 (v01 Cisco CiscoUCS 00000000 AMI 00010013)
ACPI: MCFG 0x000000007EF0DEA8 00003C (v01 Cisco CiscoUCS 00000000 MSFT 00000097)
ACPI: SRAT 0x000000007EF0DEE8 0004B0 (v03 Cisco CiscoUCS 00000001 AMI. 00000000)
ACPI: SLIT 0x000000007EF0E398 000030 (v01 Cisco CiscoUCS 00000000 AMI. 00000000)
ACPI: HPET 0x000000007EF0E3C8 000038 (v01 Cisco CiscoUCS 00000000 AMI. 00000005)
ACPI: SPMI 0x000000007EF0E400 000040 (v05 Cisco CiscoUCS 00000000 AMI. 00000000)
ACPI: SLIC 0x000000007EF0E440 000176 (v01 Cisco CiscoUCS 00000000 AMI 00010013)
ACPI: SSDT 0x000000007EF0E5B8 0D0CB0 (v02 Cisco CiscoUCS 00004000 INTL 20051117)
ACPI: EINJ 0x000000007EFDF268 000130 (v01 Cisco CiscoUCS 00000000 00000000)
ACPI: ERST 0x000000007EFDF398 000210 (v01 Cisco CiscoUCS 00000000 00000000)
ACPI: HEST 0x000000007EFDF5A8 0000A8 (v01 Cisco CiscoUCS 00000000 00000000)
ACPI: BERT 0x000000007EFDF650 000030 (v01 Cisco CiscoUCS 00000000 00000000)
ACPI: DMAR 0x000000007EFDF680 00010A (v01 Cisco CiscoUCS 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
NUMA turned off
Faking a node at [mem 0x0000000000000000-0x000000307fffffff]
NODE_DATA(0) allocated [mem 0x307ffd7000-0x307fffdfff]
cma: Reserved 16 MiB at 0x000000307ec00000
Reserving 128MB of memory at 720MB for crashkernel (System RAM: 196538MB)
[ffffea0000000000-ffffea00c1ffffff] PMD -> [ffff882fbe400000-ffff88307e3fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000307fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000077f01fff]
node 0: [mem 0x000000007b800000-0x000000007ee9cfff]
node 0: [mem 0x000000007f27c000-0x000000007f29ffff]
node 0: [mem 0x000000007f2a2000-0x000000007f2a2fff]
node 0: [mem 0x000000007f329000-0x000000007f7fffff]
node 0: [mem 0x0000000100000000-0x000000307fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000307fffffff]
On node 0 totalpages: 50313784
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 7851 pages used for memmap
DMA32 zone: 502427 pages, LIFO batch:31
Normal zone: 778240 pages used for memmap
Normal zone: 49807360 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 32 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x77f02000-0x7b7fffff]
PM: Registered nosave memory: [mem 0x7ee9d000-0x7eeccfff]
PM: Registered nosave memory: [mem 0x7eecd000-0x7efdffff]
PM: Registered nosave memory: [mem 0x7efe0000-0x7f1f9fff]
PM: Registered nosave memory: [mem 0x7f1fa000-0x7f27bfff]
PM: Registered nosave memory: [mem 0x7f2a0000-0x7f2a1fff]
PM: Registered nosave memory: [mem 0x7f2a3000-0x7f328fff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88307e400000 s101016 r8192 d30056 u262144
pcpu-alloc: s101016 r8192 d30056 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists in Node order, mobility grouping on. Total pages: 49527607
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/PQ00-root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=PQ01/swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=PQ00/root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet numa=off transparent_hugepage=never
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 197829748K/201255136K available (6937K kernel code, 1550K rwdata, 3680K rodata, 1796K init, 2872K bss, 3409004K reserved, 16384K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS:524544 nr_irqs:1496 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2699.985 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.97 BogoMIPS (lpj=2699985)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 33554432 (order: 16, 268435456 bytes)
Inode-cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Mount-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mountpoint-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 20 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81da7000 - ffffffff81dae000)
ftrace: allocating 27831 entries in 109 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffe000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: DRHD base: 0x000000dfffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
dmar: RMRR base: 0x00000078a67000 end: 0x0000007aa67fff
dmar: RMRR base: 0x0000007b68f000 end: 0x0000007b69dfff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffe000 proximity domain: 0x1
dmar: RHSA base: 0x000000dfffc000 proximity domain: 0x0
IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 1
IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 1
HPET id 0 under DRHD base 0xdfffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2680 0 @ 2.70GHz (fam: 06, model: 2d, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8
TSC synchronization [CPU#0 -> CPU#8]:
Measured 406750 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 #30 #31
x86: Booted up 1 node, 32 CPUs
smpboot: Total of 32 processors activated (172886.49 BogoMIPS)
devtmpfs: initialized
Using 2GB memory block size for large-memory system
PM: Registering ACPI NVS region [mem 0x7efe0000-0x7f1f9fff] (2203648 bytes)
PM: Registering ACPI NVS region [mem 0x7f2a3000-0x7f328fff] (548864 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20150410/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xdfe06000-0xdfe06fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdfe02000-0xdfe023ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdfe01000-0xdfe013ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:01:00.0: [1000:0073] type 00 class 0x010700
pci 0000:01:00.0: reg 0x10: [io 0x8000-0x80ff]
pci 0000:01:00.0: reg 0x14: [mem 0xdfd60000-0xdfd63fff 64bit]
pci 0000:01:00.0: reg 0x1c: [mem 0xdfd00000-0xdfd3ffff 64bit]
pci 0000:01:00.0: reg 0x30: [mem 0xdfd40000-0xdfd5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:02:00.0: [1137:004e] type 01 class 0x060400
pci 0000:02:00.0: PME# supported from D0 D3hot
pci 0000:00:02.0: PCI bridge to [bus 02-08]
pci 0000:00:02.0: bridge window [io 0x5000-0x7fff]
pci 0000:00:02.0: bridge window [mem 0xdf900000-0xdfcfffff]
pci 0000:03:00.0: [1137:0041] type 01 class 0x060400
pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc0ffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03-08]
pci 0000:02:00.0: bridge window [io 0x5000-0x7fff]
pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdfcfffff]
pci 0000:04:00.0: [1137:0040] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-08]
pci 0000:03:00.0: bridge window [io 0x5000-0x7fff]
pci 0000:03:00.0: bridge window [mem 0xdf900000-0xdfbfffff]
pci 0000:05:00.0: [1137:0041] type 01 class 0x060400
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: [1137:0041] type 01 class 0x060400
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:02.0: [1137:0041] type 01 class 0x060400
pci 0000:05:02.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 05-08]
pci 0000:04:00.0: bridge window [io 0x5000-0x7fff]
pci 0000:04:00.0: bridge window [mem 0xdf900000-0xdfbfffff]
pci 0000:06:00.0: [1137:0043] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xdfb10000-0xdfb17fff 64bit]
pci 0000:06:00.0: reg 0x18: [mem 0xdfb18000-0xdfb19fff 64bit]
pci 0000:06:00.0: reg 0x20: [io 0x7000-0x707f]
pci 0000:06:00.0: reg 0x30: [mem 0xdfb00000-0xdfb0ffff pref]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:05:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:07:00.0: [1137:0045] type 00 class 0x0c0400
pci 0000:07:00.0: reg 0x10: [mem 0xdfa08000-0xdfa0ffff 64bit]
pci 0000:07:00.0: reg 0x18: [mem 0xdfa10000-0xdfa11fff 64bit]
pci 0000:07:00.0: reg 0x20: [io 0x6000-0x607f]
pci 0000:07:00.0: reg 0x30: [mem 0xdfa00000-0xdfa07fff pref]
pci 0000:05:01.0: PCI bridge to [bus 07]
pci 0000:05:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:05:01.0: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:08:00.0: [1137:0045] type 00 class 0x0c0400
pci 0000:08:00.0: reg 0x10: [mem 0xdf908000-0xdf90ffff 64bit]
pci 0000:08:00.0: reg 0x18: [mem 0xdf910000-0xdf911fff 64bit]
pci 0000:08:00.0: reg 0x20: [io 0x5000-0x507f]
pci 0000:08:00.0: reg 0x30: [mem 0xdf900000-0xdf907fff pref]
pci 0000:05:02.0: PCI bridge to [bus 08]
pci 0000:05:02.0: bridge window [io 0x5000-0x5fff]
pci 0000:05:02.0: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:11.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:0b:00.0: [102b:0522] type 00 class 0x030000
pci 0000:0b:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:0b:00.0: reg 0x14: [mem 0xdf810000-0xdf813fff]
pci 0000:0b:00.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
pci 0000:0b:00.0: reg 0x30: [mem 0xdf800000-0xdf80ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-fe]
pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff]
pci 0000:80:02.0: PCI bridge to [bus 81]
pci_bus 0000:80: on NUMA node 0
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:0b:00.0
vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0x77f02000-0x77ffffff]
e820: reserve RAM buffer [mem 0x7ee9d000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f2a0000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f2a3000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs IPI0001 (active)
system 00:06: [io 0x0400-0x0453] could not be reserved
system 00:06: [io 0x0458-0x047f] has been reserved
system 00:06: [io 0x1180-0x119f] has been reserved
system 00:06: [io 0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:05:00.0: PCI bridge to [bus 06]
pci 0000:05:00.0: bridge window [io 0x7000-0x7fff]
pci 0000:05:00.0: bridge window [mem 0xdfb00000-0xdfbfffff]
pci 0000:05:01.0: PCI bridge to [bus 07]
pci 0000:05:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:05:01.0: bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:05:02.0: PCI bridge to [bus 08]
pci 0000:05:02.0: bridge window [io 0x5000-0x5fff]
pci 0000:05:02.0: bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:04:00.0: PCI bridge to [bus 05-08]
pci 0000:04:00.0: bridge window [io 0x5000-0x7fff]
pci 0000:04:00.0: bridge window [mem 0xdf900000-0xdfbfffff]
pci 0000:03:00.0: PCI bridge to [bus 04-08]
pci 0000:03:00.0: bridge window [io 0x5000-0x7fff]
pci 0000:03:00.0: bridge window [mem 0xdf900000-0xdfbfffff]
pci 0000:02:00.0: PCI bridge to [bus 03-08]
pci 0000:02:00.0: bridge window [io 0x5000-0x7fff]
pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdfcfffff]
pci 0000:00:02.0: PCI bridge to [bus 02-08]
pci 0000:00:02.0: bridge window [io 0x5000-0x7fff]
pci 0000:00:02.0: bridge window [mem 0xdf900000-0xdfcfffff]
pci 0000:00:11.0: PCI bridge to [bus 09]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:00:1c.7: PCI bridge to [bus 0b]
pci 0000:00:1c.7: bridge window [mem 0xde000000-0xdf8fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:02: resource 0 [io 0x5000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xdf900000-0xdfcfffff]
pci_bus 0000:03: resource 0 [io 0x5000-0x7fff]
pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdfcfffff]
pci_bus 0000:04: resource 0 [io 0x5000-0x7fff]
pci_bus 0000:04: resource 1 [mem 0xdf900000-0xdfbfffff]
pci_bus 0000:05: resource 0 [io 0x5000-0x7fff]
pci_bus 0000:05: resource 1 [mem 0xdf900000-0xdfbfffff]
pci_bus 0000:06: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:06: resource 1 [mem 0xdfb00000-0xdfbfffff]
pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:07: resource 1 [mem 0xdfa00000-0xdfafffff]
pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:08: resource 1 [mem 0xdf900000-0xdf9fffff]
pci_bus 0000:0b: resource 1 [mem 0xde000000-0xdf8fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0c: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0c: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0c: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:0c: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0c: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0c: resource 10 [mem 0x80000000-0xdfffffff window]
pci 0000:80:02.0: PCI bridge to [bus 81]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:0b:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 44280K (ffff8800354b2000 - ffff880037ff0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x73f02000-0x77f02000] (64MB) mapped at [ffff880073f02000-ffff880077f01fff]
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x26eb308e172, max_idle_ns: 440795342867 ns
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain dram 2^-16 Joules
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU16 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU17 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU18 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU19 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU20 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU21 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU22 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU23 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU24 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU25 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU26 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU27 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU28 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU29 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU30 sig=0x206d7, pf=0x1, revision=0x710
microcode: CPU31 sig=0x206d7, pf=0x1, revision=0x710
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1508978563.496:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
page_owner is disabled
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:11.0:pcie02: service driver aer loaded
aer 0000:80:02.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:01.0: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:05:02.0: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pcieport 0000:80:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:80:02.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [P111] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfe02000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.12-37.4.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfe01000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.12-37.4.1.el6uek.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
gre: GRE over IPv4 demultiplexor driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Oracle America, Inc.: Ksplice Kernel Module Signing Key: 09010ebef5545fa7c54b626ef518e077b5b1ee4c'
Loaded X.509 cert 'Oracle Linux Kernel Module Signing Key: 2bb352412969a3653f0eb6021763408ebb9bb5ab'
Loaded X.509 cert 'Oracle CA Server: 0cf9b0deb17dfe8d0657cdfc8af8f92415fd9d18'
registered taskstats version 1
ima: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2017-10-26 00:42:45 UTC (1508978565)
Freeing unused kernel memory: 1796K (ffffffff81be6000 - ffffffff81da7000)
dracut: dracut-004-409.0.1.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
udev: starting version 147
device-mapper: multipath: version 1.9.0 loaded
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: new high-speed USB device number 2 using ehci-pci
wmi: Mapper loaded
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 1-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
hub 1-1:1.0: 6 ports detected
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
megasas: 06.810.09.00-rc1
megaraid_sas 0000:01:00.0: FW now in Ready state
megaraid_sas 0000:01:00.0: firmware supports msix : (0)
megaraid_sas 0000:01:00.0: current msix/online cpus : (1/32)
megaraid_sas 0000:01:00.0: RDPQ mode : (disabled)
NET: Registered protocol family 10
usb 2-1.4: new full-speed USB device number 3 using ehci-pci
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
iscsi: registered transport (cxgb4i)
cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=ffffffffa0304cc0
megaraid_sas 0000:01:00.0: controller type : iMR(0MB)
megaraid_sas 0000:01:00.0: Online Controller Reset(OCR) : Enabled
megaraid_sas 0000:01:00.0: Secure JBOD support : No
megaraid_sas 0000:01:00.0: megasas_init_mfi: fw_support_ieee=67108864
megaraid_sas 0000:01:00.0: INIT adapter done
megaraid_sas 0000:01:00.0: Jbod map is not supported megasas_setup_jbod_map 4935
usb 2-1.4: New USB device found, idVendor=0624, idProduct=0402
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: Cisco USB Composite Device-0
usb 2-1.4: Manufacturer: Avocent
usb 2-1.4: SerialNumber: 20111102-00000001
input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:0624:0402.0001/input/input2
megaraid_sas 0000:01:00.0: pci id : (0x1000)/(0x0073)/(0x1137)/(0x0072)
megaraid_sas 0000:01:00.0: unevenspan support : no
megaraid_sas 0000:01:00.0: firmware crash dump : no
megaraid_sas 0000:01:00.0: jbod sync map : no
scsi host0: Avago SAS based MegaRAID driver
hid-generic 0003:0624:0402.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.4/input0
input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:0624:0402.0002/input/input3
hid-generic 0003:0624:0402.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.4/input1
input: Avocent Cisco USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:0624:0402.0003/input/input4
hid-generic 0003:0624:0402.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Cisco USB Composite Device-0] on usb-0000:00:1d.0-1.4/input2
enic: Cisco VIC Ethernet NIC Driver, ver 2.3.0.12
enic 0000:06:00.0: vNIC MAC addr 00:25:b5:a1:01:86 wq/rq 256/512 mtu 1500
enic 0000:06:00.0: vNIC csum tx/rx yes/yes tso/lro yes/yes rss no intr mode any type min timer 125 usec loopback tag 0x0000
enic 0000:06:00.0: vNIC resources avail: wq 1 rq 1 cq 2 intr 4
enic 0000:06:00.0: vNIC resources used: wq 1 rq 1 cq 2 intr 4 intr mode MSI-X
fnic: Cisco FCoE HBA Driver, ver 1.6.0.24
fnic: Successfully Initialized Trace Buffer
fnic: Successfully Initialized FC_CTLR Trace Buffer
scsi host1: vNIC MAC addr 00:25:b5:a1:a4:be wq/wq_copy/rq 64/512/64
scsi host1: vNIC node wwn 20000025b5a1032e port wwn 20000025b5a1a4be
scsi host1: vNIC ed_tov 2000 ra_tov 10000
scsi host1: vNIC mtu 2048 intr timer 0
scsi host1: vNIC flags 0x8 luns per tgt 256
scsi host1: vNIC flogi_retries 8 flogi timeout 4000
scsi host1: vNIC plogi retries 8 plogi timeout 20000
scsi host1: vNIC io throttle count 256 link dn timeout 30000
scsi host1: vNIC port dn io retries 30 port dn timeout 30000
scsi host1: vNIC interrupt mode: MSI-X
scsi host1: vNIC resources avail: wq 2 cp_wq 1 raw_wq 1 rq 1 cq 3 intr 4
scsi host1: firmware uses non-FIP mode
scsi host1: fnic
fnic: Resetting the read idx
scsi host2: vNIC MAC addr 00:25:b5:a1:b7:be wq/wq_copy/rq 64/512/64
scsi host2: vNIC node wwn 20000025b5a1032e port wwn 20000025b5a1b7be
scsi host2: vNIC ed_tov 2000 ra_tov 10000
scsi host2: vNIC mtu 2048 intr timer 0
scsi host2: vNIC flags 0x8 luns per tgt 256
scsi host2: vNIC flogi_retries 8 flogi timeout 4000
scsi host2: vNIC plogi retries 8 plogi timeout 20000
scsi host2: vNIC io throttle count 256 link dn timeout 30000
scsi host2: vNIC port dn io retries 30 port dn timeout 30000
scsi host2: vNIC interrupt mode: MSI-X
scsi host2: vNIC resources avail: wq 2 cp_wq 1 raw_wq 1 rq 1 cq 3 intr 4
scsi host2: firmware uses non-FIP mode
scsi host2: fnic
host1: libfc: Link up on port (000000)
host1: Assigned Port ID ce0f0d
scsi 1:0:0:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
scsi 1:0:0:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
scsi 1:0:1:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
scsi 1:0:1:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
scsi 1:0:2:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 1:0:0:1: [sda] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 1:0:0:2: [sdb] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:1:1: [sdc] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 1:0:1:2: [sdd] 419430400 512-byte logical blocks: (214 GB/200 GiB)
scsi 1:0:2:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 1:0:2:1: [sde] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 1:0:0:1: [sda] Write Protect is off
sd 1:0:0:1: [sda] Mode Sense: 43 00 00 08
sd 1:0:1:1: [sdc] Write Protect is off
sd 1:0:1:1: [sdc] Mode Sense: 43 00 00 08
sd 1:0:2:2: [sdf] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:0:2: [sdb] Write Protect is off
sd 1:0:0:2: [sdb] Mode Sense: 43 00 00 08
sd 1:0:2:1: [sde] Write Protect is off
sd 1:0:2:1: [sde] Mode Sense: 43 00 00 08
sd 1:0:0:1: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:1: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:2: [sdd] Write Protect is off
sd 1:0:1:2: [sdd] Mode Sense: 43 00 00 08
sd 1:0:2:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:2: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:2: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:2:2: [sdf] Write Protect is off
sd 1:0:2:2: [sdf] Mode Sense: 43 00 00 08
sd 1:0:2:2: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:3:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sda: sda1 sda2
sde: sde1 sde2
sd 1:0:3:1: [sdg] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:3:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sdc: sdc1 sdc2
sdd: sdd1
sdb: sdb1
sdf: sdf1
sd 1:0:3:1: [sdg] Write Protect is off
sd 1:0:3:1: [sdg] Mode Sense: 43 00 00 08
sd 1:0:3:2: [sdh] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:3:1: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:1: [sda] Attached SCSI disk
sd 1:0:2:1: [sde] Attached SCSI disk
sd 1:0:1:1: [sdc] Attached SCSI disk
sd 1:0:1:2: [sdd] Attached SCSI disk
sd 1:0:0:2: [sdb] Attached SCSI disk
scsi 1:0:4:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 1:0:3:2: [sdh] Write Protect is off
sd 1:0:3:2: [sdh] Mode Sense: 43 00 00 08
sd 1:0:2:2: [sdf] Attached SCSI disk
sd 1:0:3:2: [sdh] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:4:1: [sdi] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 1:0:4:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sdg: sdg1 sdg2
sd 1:0:4:1: [sdi] Write Protect is off
sd 1:0:4:1: [sdi] Mode Sense: 43 00 00 08
sd 1:0:4:2: [sdj] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:4:1: [sdi] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdh: sdh1
sd 1:0:4:2: [sdj] Write Protect is off
sd 1:0:4:2: [sdj] Mode Sense: 43 00 00 08
sd 1:0:4:2: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:3:1: [sdg] Attached SCSI disk
scsi 1:0:5:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 1:0:3:2: [sdh] Attached SCSI disk
sd 1:0:5:1: [sdk] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sdi: sdi1 sdi2
scsi 1:0:5:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sdj: sdj1
sd 1:0:5:1: [sdk] Write Protect is off
sd 1:0:5:1: [sdk] Mode Sense: 43 00 00 08
sd 1:0:5:2: [sdl] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 1:0:5:1: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:4:1: [sdi] Attached SCSI disk
sd 1:0:5:2: [sdl] Write Protect is off
sd 1:0:5:2: [sdl] Mode Sense: 43 00 00 08
sd 1:0:5:2: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:4:2: [sdj] Attached SCSI disk
sdk: sdk1 sdk2
sdl: sdl1
sd 1:0:5:1: [sdk] Attached SCSI disk
sd 1:0:5:2: [sdl] Attached SCSI disk
device-mapper: multipath round-robin: version 1.0.0 loaded
dracut: Scanning devices dm-3 dm-4 for LVM logical volumes PQ01/swap PQ00/root
random: lvm urandom read with 66 bits of entropy available
dracut: inactive '/dev/PQ01/swap' [16.00 GiB] inherit
dracut: inactive '/dev/PQ01/oracle' [20.00 GiB] inherit
dracut: inactive '/dev/PQ01/grid' [20.00 GiB] inherit
dracut: inactive '/dev/PQ01/orainventory' [4.00 GiB] inherit
dracut: inactive '/dev/PQ01/oradiag' [10.00 GiB] inherit
dracut: inactive '/dev/PQ00/root' [15.00 GiB] inherit
dracut: inactive '/dev/PQ00/home' [4.00 GiB] inherit
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/PQ00-root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1508978568.960:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
sd 1:0:0:1: Attached scsi generic sg0 type 0
sd 1:0:0:2: Attached scsi generic sg1 type 0
sd 1:0:1:1: Attached scsi generic sg2 type 0
sd 1:0:1:2: Attached scsi generic sg3 type 0
sd 1:0:2:1: Attached scsi generic sg4 type 0
sd 1:0:2:2: Attached scsi generic sg5 type 0
sd 1:0:3:1: Attached scsi generic sg6 type 0
sd 1:0:3:2: Attached scsi generic sg7 type 0
sd 1:0:4:1: Attached scsi generic sg8 type 0
sd 1:0:4:2: Attached scsi generic sg9 type 0
sd 1:0:5:1: Attached scsi generic sg10 type 0
sd 1:0:5:2: Attached scsi generic sg11 type 0
host2: libfc: Link up on port (000000)
host2: Assigned Port ID 3408cc
scsi 2:0:0:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:0:1: Attached scsi generic sg12 type 0
sd 2:0:0:1: [sdm] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 2:0:0:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:0:1: [sdm] Write Protect is off
sd 2:0:0:1: [sdm] Mode Sense: 43 00 00 08
sd 2:0:0:2: Attached scsi generic sg13 type 0
sd 2:0:0:1: [sdm] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:2: [sdn] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 2:0:0:2: [sdn] Write Protect is off
sd 2:0:0:2: [sdn] Mode Sense: 43 00 00 08
sd 2:0:0:2: [sdn] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:1:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:1:1: Attached scsi generic sg14 type 0
sdm: sdm1 sdm2
sd 2:0:1:1: [sdo] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 2:0:1:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:1:2: Attached scsi generic sg15 type 0
sdn: sdn1
sd 2:0:1:1: [sdo] Write Protect is off
sd 2:0:1:2: [sdp] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 2:0:1:1: [sdo] Mode Sense: 43 00 00 08
sd 2:0:1:1: [sdo] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:1:2: [sdp] Write Protect is off
sd 2:0:1:2: [sdp] Mode Sense: 43 00 00 08
sd 2:0:0:1: [sdm] Attached SCSI disk
sd 2:0:1:2: [sdp] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:2:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:0:2: [sdn] Attached SCSI disk
sd 2:0:2:1: [sdq] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 2:0:2:1: Attached scsi generic sg16 type 0
scsi 2:0:2:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:2:1: [sdq] Write Protect is off
sdo: sdo1 sdo2
sd 2:0:2:1: [sdq] Mode Sense: 43 00 00 08
sd 2:0:2:1: [sdq] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:2:2: Attached scsi generic sg17 type 0
sd 2:0:2:2: [sdr] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sdp: sdp1
random: nonblocking pool is initialized
sd 2:0:2:2: [sdr] Write Protect is off
sd 2:0:2:2: [sdr] Mode Sense: 43 00 00 08
sd 2:0:1:1: [sdo] Attached SCSI disk
sd 2:0:2:2: [sdr] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:3:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sdq: sdq1 sdq2
sd 2:0:1:2: [sdp] Attached SCSI disk
sd 2:0:3:1: Attached scsi generic sg18 type 0
sd 2:0:3:1: [sds] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 2:0:3:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:3:2: Attached scsi generic sg19 type 0
sd 2:0:3:1: [sds] Write Protect is off
sd 2:0:3:1: [sds] Mode Sense: 43 00 00 08
sd 2:0:3:2: [sdt] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 2:0:2:1: [sdq] Attached SCSI disk
sd 2:0:3:1: [sds] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdr: sdr1
sd 2:0:3:2: [sdt] Write Protect is off
sd 2:0:3:2: [sdt] Mode Sense: 43 00 00 08
sd 2:0:3:2: [sdt] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:4:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:2:2: [sdr] Attached SCSI disk
sd 2:0:4:1: Attached scsi generic sg20 type 0
sd 2:0:4:1: [sdu] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sds: sds1 sds2
scsi 2:0:4:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sdt: sdt1
sd 2:0:4:1: [sdu] Write Protect is off
sd 2:0:4:1: [sdu] Mode Sense: 43 00 00 08
sd 2:0:4:2: Attached scsi generic sg21 type 0
sd 2:0:4:2: [sdv] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 2:0:4:1: [sdu] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:4:2: [sdv] Write Protect is off
sd 2:0:4:2: [sdv] Mode Sense: 43 00 00 08
sd 2:0:3:1: [sds] Attached SCSI disk
sd 2:0:4:2: [sdv] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:3:2: [sdt] Attached SCSI disk
scsi 2:0:5:1: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sdu: sdu1 sdu2
sd 2:0:5:1: Attached scsi generic sg22 type 0
sd 2:0:5:1: [sdw] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
scsi 2:0:5:2: Direct-Access PURE FlashArray 492 PQ: 0 ANSI: 6
sd 2:0:5:2: Attached scsi generic sg23 type 0
sd 2:0:5:1: [sdw] Write Protect is off
sd 2:0:5:1: [sdw] Mode Sense: 43 00 00 08
sdv: sdv1
sd 2:0:5:2: [sdx] 419430400 512-byte logical blocks: (214 GB/200 GiB)
sd 2:0:5:1: [sdw] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:4:1: [sdu] Attached SCSI disk
sd 2:0:5:2: [sdx] Write Protect is off
sd 2:0:5:2: [sdx] Mode Sense: 43 00 00 08
sd 2:0:5:2: [sdx] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:4:2: [sdv] Attached SCSI disk
sdw: sdw1 sdw2
sdx: sdx1
sd 2:0:5:1: [sdw] Attached SCSI disk
sd 2:0:5:2: [sdx] Attached SCSI disk
WARNING! power/level is deprecated; use power/control instead
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:05: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:05: Found new BMC (man_id: 0x00168b, prod_id: 0x0009, dev_id: 0x20)
ipmi_si 00:05: IPMI kcs interface initialized
ipmi device interface
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#0: DEV 0000:7f:0e.0 (POLLED)
EDAC MC1: Giving out device to module sbridge_edac.c controller Sandy Bridge Socket#1: DEV 0000:ff:0e.0 (POLLED)
EDAC sbridge: Ver: 1.1.0
input: PC Speaker as /devices/platform/pcspkr/input/input5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
EXT4-fs (dm-6): re-mounted. Opts: (null)
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-11): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-9): mounted filesystem with ordered data mode. Opts: (null)
Adding 16777212k swap on /dev/mapper/PQ01-swap. Priority:-1 extents:1 across:16777212k SSFS
enic 0000:06:00.0 eth0: Link UP
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
{1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
{1}[Hardware Error]: It has been corrected by h/w and requires no further action
{1}[Hardware Error]: event severity: corrected
{1}[Hardware Error]: Error 0, type: corrected
{1}[Hardware Error]: fru_text: CorrectedErr
{1}[Hardware Error]: section_type: PCIe error
{1}[Hardware Error]: port_type: 0, PCIe end point
{1}[Hardware Error]: version: 0.0
{1}[Hardware Error]: command: 0xffff, status: 0xffff
{1}[Hardware Error]: device_id: 0000:00:03.0
{1}[Hardware Error]: slot: 0
{1}[Hardware Error]: secondary_bus: 0x00
{1}[Hardware Error]: vendor_id: 0xffff, device_id: 0xffff
{1}[Hardware Error]: class_code: ffffff
EXT4-fs (dm-7): resizing filesystem from 5242880 to 36700160 blocks
EXT4-fs (dm-7): resized filesystem to 36700160
EXT4-fs (dm-6): resizing filesystem from 3932160 to 11952128 blocks
EXT4-fs (dm-6): resized filesystem to 11952128
perf interrupt took too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5103 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
perf interrupt took too long (10004 > 9615), lowering kernel.perf_event_max_sample_rate to 13000
python (12491): drop_caches: 3
python (12491): drop_caches: 3
python (12507): drop_caches: 3
python (12507): drop_caches: 3
python (12525): drop_caches: 3
python (12525): drop_caches: 3
python (12540): drop_caches: 3
python (12540): drop_caches: 3
python (12559): drop_caches: 3
python (12559): drop_caches: 3
python (12574): drop_caches: 3
python (12574): drop_caches: 3