dmesg - DARKTABLE_BOAT_XMG_CORE_15
random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
Linux version 4.13.8-1-ARCH (builduser@tobias) (gcc version 7.2.0 (GCC)) #1 SMP PREEMPT Wed Oct 18 11:49:44 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094c27fff] usable
BIOS-e820: [mem 0x0000000094c28000-0x0000000094c28fff] ACPI NVS
BIOS-e820: [mem 0x0000000094c29000-0x0000000094c29fff] reserved
BIOS-e820: [mem 0x0000000094c2a000-0x000000009d22bfff] usable
BIOS-e820: [mem 0x000000009d22c000-0x00000000aed0ffff] reserved
BIOS-e820: [mem 0x00000000aed10000-0x00000000aef03fff] ACPI NVS
BIOS-e820: [mem 0x00000000aef04000-0x00000000aeffdfff] ACPI data
BIOS-e820: [mem 0x00000000aeffe000-0x00000000aeffefff] usable
BIOS-e820: [mem 0x00000000aefff000-0x00000000afffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x92540018-0x92579857] usable ==> usable
e820: update [mem 0x92540018-0x92579857] usable ==> usable
e820: update [mem 0x92531018-0x9253f057] usable ==> usable
e820: update [mem 0x92531018-0x9253f057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
reserve setup_data: [mem 0x000000000009d000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000092531017] usable
reserve setup_data: [mem 0x0000000092531018-0x000000009253f057] usable
reserve setup_data: [mem 0x000000009253f058-0x0000000092540017] usable
reserve setup_data: [mem 0x0000000092540018-0x0000000092579857] usable
reserve setup_data: [mem 0x0000000092579858-0x0000000094c27fff] usable
reserve setup_data: [mem 0x0000000094c28000-0x0000000094c28fff] ACPI NVS
reserve setup_data: [mem 0x0000000094c29000-0x0000000094c29fff] reserved
reserve setup_data: [mem 0x0000000094c2a000-0x000000009d22bfff] usable
reserve setup_data: [mem 0x000000009d22c000-0x00000000aed0ffff] reserved
reserve setup_data: [mem 0x00000000aed10000-0x00000000aef03fff] ACPI NVS
reserve setup_data: [mem 0x00000000aef04000-0x00000000aeffdfff] ACPI data
reserve setup_data: [mem 0x00000000aeffe000-0x00000000aeffefff] usable
reserve setup_data: [mem 0x00000000aefff000-0x00000000afffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fe010000-0x00000000fe010fff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000044effffff] usable
efi: EFI v2.50 by Phoenix Technologies Ltd.
efi: SMBIOS=0xa50cd000 SMBIOS 3.0=0xa50ca000 ACPI=0xaeffd000 ACPI 2.0=0xaeffd014 ESRT=0xa4ec2000 MEMATTR=0x994a5298
random: fast init done
SMBIOS 3.0.0 present.
DMI: XMG CORE 15 XC15L17/NL5, BIOS MP117 06/15/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x44f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00B0000000 mask 7FF0000000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xaefff max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000a4ec2000 to 0x00000000a4ec2038.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff918d00097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x383d64000, 0x383d64fff] PGTABLE
BRK [0x383d65000, 0x383d65fff] PGTABLE
BRK [0x383d66000, 0x383d66fff] PGTABLE
BRK [0x383d67000, 0x383d67fff] PGTABLE
BRK [0x383d68000, 0x383d68fff] PGTABLE
BRK [0x383d69000, 0x383d69fff] PGTABLE
BRK [0x383d6a000, 0x383d6afff] PGTABLE
BRK [0x383d6b000, 0x383d6bfff] PGTABLE
BRK [0x383d6c000, 0x383d6cfff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x7f07b000-0x7fffefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000AEFFD014 000024 (v02 PTEC )
ACPI: XSDT 0x00000000AEFBC188 00011C (v01 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: FACP 0x00000000AEFF0000 0000F4 (v05 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: DSDT 0x00000000AEFC8000 024989 (v02 PTEC SKL 00000000 INTL 20160527)
ACPI: FACS 0x00000000AEDCE000 000040
ACPI: SSDT 0x00000000AEFFB000 0004CE (v02 PTEC Tpm2Tabl 00001000 INTL 20160527)
ACPI: SSDT 0x00000000AEFFA000 000046 (v02 PTEC MeSsdt 00003000 INTL 20160527)
ACPI: TPM2 0x00000000AEFF9000 000034 (v03 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: UEFI 0x00000000AEDE3000 000042 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: SSDT 0x00000000AEFF5000 003699 (v02 PTEC SaSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x00000000AEFF2000 002E46 (v02 PTEC PegSsdt 00001000 INTL 20160527)
ACPI: SSDT 0x00000000AEFF1000 0005B6 (v02 PTEC PerfTune 00001000 INTL 20160527)
ACPI: HPET 0x00000000AEFEF000 000038 (v01 PTEC OEMTABLE 00000001 PTEC 00000002)
ACPI: APIC 0x00000000AEFEE000 0000BC (v03 PTEC OEMTABLE 00000001 PTEC 00000002)
ACPI: MCFG 0x00000000AEFED000 00003C (v01 PTEC OEMTABLE 00000001 PTEC 00000002)
ACPI: SSDT 0x00000000AEFC7000 0001BC (v02 PTEC Sata0Ide 00001000 INTL 20160527)
ACPI: SSDT 0x00000000AEFC6000 000A4B (v02 PTEC xh_rvp11 00000000 INTL 20160527)
ACPI: BOOT 0x00000000AEFC5000 000028 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: BATB 0x00000000AEFC4000 00004A (v02 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: SSDT 0x00000000AEFC3000 000EDE (v02 PTEC CpuSsdt 00003000 INTL 20160527)
ACPI: SSDT 0x00000000AEFC1000 00106A (v02 PTEC UsbCTabl 00001000 INTL 20160527)
ACPI: LPIT 0x00000000AEFC0000 000094 (v01 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: WSMT 0x00000000AEFBF000 000028 (v01 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: SSDT 0x00000000AEFBE000 000141 (v02 PTEC HdaDsp 00000000 INTL 20160527)
ACPI: SSDT 0x00000000AEFBD000 000346 (v01 PTEC EInkApp 00000000 INTL 20160527)
ACPI: SSDT 0x00000000AEFB8000 003002 (v02 PTEC PtidDevc 00001000 INTL 20160527)
ACPI: SSDT 0x00000000AEFFC000 000215 (v02 PTEC TbtTypeC 00000000 INTL 20160527)
ACPI: DBGP 0x00000000AEFB7000 000034 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: DBG2 0x00000000AEFB6000 000054 (v00 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: POAT 0x00000000AEFB5000 000055 (v03 PTEC OEMTABLE 00000000 PTEC 00000002)
ACPI: SSDT 0x00000000AEFB3000 001D50 (v01 PTEC NvOptTbl 00001000 INTL 20160527)
ACPI: DMAR 0x00000000AEFB2000 0000B8 (v01 PTEC OEMTABLE 00000001 PTEC 00000002)
ACPI: FPDT 0x00000000AEFB1000 000044 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: BGRT 0x00000000AEFB0000 000038 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: UEFI 0x00000000AED8A000 00012A (v01 PTEC OEMTABLE 00000001 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000044effffff]
NODE_DATA(0) allocated [mem 0x44effb000-0x44effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000044effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000094c27fff]
node 0: [mem 0x0000000094c2a000-0x000000009d22bfff]
node 0: [mem 0x00000000aeffe000-0x00000000aeffefff]
node 0: [mem 0x0000000100000000-0x000000044effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff]
On node 0 totalpages: 4112838
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 9993 pages used for memmap
DMA32 zone: 639531 pages, LIFO batch:31
Normal zone: 54208 pages used for memmap
Normal zone: 3469312 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
PM: Registered nosave memory: [mem 0x92531000-0x92531fff]
PM: Registered nosave memory: [mem 0x9253f000-0x9253ffff]
PM: Registered nosave memory: [mem 0x92540000-0x92540fff]
PM: Registered nosave memory: [mem 0x92579000-0x92579fff]
PM: Registered nosave memory: [mem 0x94c28000-0x94c28fff]
PM: Registered nosave memory: [mem 0x94c29000-0x94c29fff]
PM: Registered nosave memory: [mem 0x9d22c000-0xaed0ffff]
PM: Registered nosave memory: [mem 0xaed10000-0xaef03fff]
PM: Registered nosave memory: [mem 0xaef04000-0xaeffdfff]
PM: Registered nosave memory: [mem 0xaefff000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe00ffff]
PM: Registered nosave memory: [mem 0xfe010000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff91914ec00000 s106520 r8192 d32744 u262144
pcpu-alloc: s106520 r8192 d32744 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4048552
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16064088K/16451352K available (6644K kernel code, 1134K rwdata, 2048K rodata, 1336K init, 908K bss, 387264K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 28353 entries in 111 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS: 8448, nr_irqs: 2048, preallocated irqs: 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2800.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.00 BogoMIPS (lpj=9360000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170531
ACPI Error: [PPMS] Namespace lookup failure, AE_ALREADY_EXISTS (20170531/dswload-378)
ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170531/psobject-252)
ACPI Exception: AE_ALREADY_EXISTS, (SSDT: HdaDsp) while loading table (20170531/tbxfload-228)
ACPI Error: 1 table load failures, 14 successful (20170531/tbxfload-246)
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x000000ad86f000 end: 0x000000ad88efff
DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Hierarchical SRCU implementation.
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (44956.29 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x94c28000-0x94c28fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xaed10000-0xaef03fff] (2048000 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:44:48, date: 10/26/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x47 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 35 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C6A6800 000651 (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C194000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C16EA00 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C16DE00 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C6A4000 00065C (v02 PmRef ApIst 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C16D200 000197 (v02 PmRef ApHwp 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF91913C16C200 00018A (v02 PmRef ApCst 00003000 INTL 20160527)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd4900000-0xd490ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xd492a000-0xd492afff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xd492b000-0xd492bfff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xd492c000-0xd492cfff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd492d000-0xd492dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xd4928000-0xd4929fff]
pci 0000:00:17.0: reg 0x14: [mem 0xd4930000-0xd49300ff]
pci 0000:00:17.0: reg 0x18: [io 0xe040-0xe047]
pci 0000:00:17.0: reg 0x1c: [io 0xe048-0xe04b]
pci 0000:00:17.0: reg 0x20: [io 0xe020-0xe03f]
pci 0000:00:17.0: reg 0x24: [mem 0xd492e000-0xd492e7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xd4924000-0xd4927fff]
pci 0000:00:1f.3: [8086:a171] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xd4920000-0xd4923fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xd4910000-0xd491ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xd492f000-0xd492f0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [10de:1c20] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd3f00000-0xd48fffff]
pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd3afffff 64bit pref]
pci 0000:03:00.0: [10ec:522a] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xd3e00000-0xd3e00fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xd3e00000-0xd3efffff]
pci 0000:04:00.0: [8086:24fb] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xd3d00000-0xd3d01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xd3d00000-0xd3dfffff]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xd3c04000-0xd3c04fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xd3c00000-0xd3c03fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xd3c00000-0xd3cfffff]
pci 0000:06:00.0: [144d:a804] type 00 class 0x010802
pci 0000:06:00.0: reg 0x10: [mem 0xd3b00000-0xd3b03fff 64bit]
pci 0000:00:1d.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: bridge window [mem 0xd3b00000-0xd3bfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff]
acpi MSFT0101:00: platform device creation failed: -16
ACPI: Enabled 4 GPEs in block 00 to 7F
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: setting as boot device
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
e820: reserve RAM buffer [mem 0x92531018-0x93ffffff]
e820: reserve RAM buffer [mem 0x92540018-0x93ffffff]
e820: reserve RAM buffer [mem 0x94c28000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9d22c000-0x9fffffff]
e820: reserve RAM buffer [mem 0xaefff000-0xafffffff]
e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0xff00-0xfffe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] has been reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN105b PNP0f13 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:09: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xd3f00000-0xd48fffff]
pci 0000:00:1c.0: bridge window [mem 0xd3100000-0xd3afffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xd3e00000-0xd3efffff]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [mem 0xd3d00000-0xd3dfffff]
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xd3c00000-0xd3cfffff]
pci 0000:00:1d.0: PCI bridge to [bus 06]
pci 0000:00:1d.0: bridge window [mem 0xd3b00000-0xd3bfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0xb0000000-0xdfffffff window]
pci_bus 0000:00: resource 20 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd3f00000-0xd48fffff]
pci_bus 0000:02: resource 2 [mem 0xd3100000-0xd3afffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xd3e00000-0xd3efffff]
pci_bus 0000:04: resource 1 [mem 0xd3d00000-0xd3dfffff]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xd3c00000-0xd3cfffff]
pci_bus 0000:06: resource 1 [mem 0xd3b00000-0xd3bfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 15888K
DMAR: ACPI device "device:80" under DMAR at fed90000 as 00:15.0
DMAR: ACPI device "device:81" under DMAR at fed90000 as 00:15.1
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x95163000-0x99163000] (64MB) mapped at [ffff918d95163000-ffff918d99162fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:1c.0: AER enabled with IRQ 122
pcieport 0000:00:1c.4: AER enabled with IRQ 123
pcieport 0000:00:1c.5: AER enabled with IRQ 124
pcieport 0000:00:1c.6: AER enabled with IRQ 125
pcieport 0000:00:1d.0: AER enabled with IRQ 126
pcieport 0000:00:01.0: Signaling PME with IRQ 121
pcieport 0000:00:1c.0: Signaling PME with IRQ 122
pcieport 0000:00:1c.4: Signaling PME with IRQ 123
pcieport 0000:00:1c.5: Signaling PME with IRQ 124
pcieport 0000:00:1c.6: Signaling PME with IRQ 125
pcieport 0000:00:1d.0: Signaling PME with IRQ 126
pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
efifb: probing for efifb
efifb: framebuffer at 0xc0000000, using 8640k, total 8640k
efifb: mode is 1920x1080x32, linelength=8192, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: Disabling energy efficiency optimization
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x906e9, pf=0x20, revision=0x5e
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (1275452028, 0)->(1279328443, -3876415)
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 5:361:743
rtc_cmos 00:04: setting system clock to 2017-10-26 16:44:49 UTC (1509036289)
PM: Checking hibernation image partition /dev/mapper/vgRoot-lvSwap
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1536K
i8042: PNP: PS/2 Controller [PNP0303:PS2L,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
SCSI subsystem initialized
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
nvme nvme0: pci function 0000:06:00.0
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ahci 0000:00:17.0: version 3.0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xd492e000 port 0xd492e280 irq 130
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
nvme0n1: p1 p2
usb 1-1: new full-speed USB device number 2 using xhci_hcd
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: SanDisk Ultra II 960GB, X41100RL, max UDMA/133
ata4.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] Attached SCSI disk
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-2: new full-speed USB device number 3 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 1-3: new full-speed USB device number 4 using xhci_hcd
NET: Registered protocol family 38
random: crng init done
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Ending clean mount
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Login Prompts.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice System Slice.
systemd-journald[333]: Received request to flush runtime journal from PID 1
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
acpi device:01: registered as cooling_device8
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: Corsair Corsair VOID Wireless Gaming Dongle as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:1B1C:1B27.0001/input/input9
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[Firmware Bug]: Invalid critical threshold (0)
ACPI: Invalid passive threshold
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (36 C)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
Linux agpgart interface v0.103
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.4: SPD Write Disable is set
i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0 eth0: RTL8168h/8111h at 0xffffafd741b89000, a8:1e:84:84:3f:17, XID 14100880 IRQ 139
r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver snd-usb-audio
input: PC Speaker as /devices/platform/pcspkr/input/input10
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
hid-generic 0003:1B1C:1B27.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Corsair Corsair VOID Wireless Gaming Dongle] on usb-0000:00:14.0-1/input3
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1532:011B.0002/input/input12
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
iwlwifi 0000:04:00.0: loaded firmware version 29.541020.0 op_mode iwlmvm
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 3168, REV=0x220
r8169 0000:05:00.0 enp5s0: renamed from eth0
iwlwifi 0000:04:00.0: base HW address: 1c:4d:70:cf:ff:71
Adding 33554428k swap on /dev/mapper/vgRoot-lvSwap. Priority:-1 extents:1 across:33554428k SSFS
hid-generic 0003:1532:011B.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-2/input0
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1532:011B.0003/input/input14
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia-nvlink: Nvlink Core is being initialized, major device number 242
nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 387.12 Thu Sep 28 20:18:48 PDT 2017 (using threaded interrupts)
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone3: failed to read out thermal zone (-5)
iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 387.12 Thu Sep 28 19:30:23 PDT 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
hid-generic 0003:1532:011B.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-2/input1
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:1532:011B.0004/input/input15
hid-generic 0003:1532:011B.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:14.0-2/input2
input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C07E.0005/input/input16
hid-generic 0003:046D:C07E.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3/input0
input: Logitech Gaming Mouse G402 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:046D:C07E.0006/input/input17
hid-generic 0003:046D:C07E.0006: input,hiddev1,hidraw5: USB HID v1.11 Keyboard [Logitech Gaming Mouse G402] on usb-0000:00:14.0-3/input1
mousedev: PS/2 mouse device common for all mice
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card1/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input18
psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4712]
psmouse serio1: synaptics: queried min coordinates: x [1326..], y [1200..]
psmouse serio1: synaptics: Your touchpad (PNP: SYN105b PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x12e800/0x0, board id: 2997, fw id: 1665536
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
XFS (dm-4): Mounting V5 Filesystem
XFS (dm-4): Ending clean mount
Netfilter messages via NETLINK v0.30.
nf_tables: (c) 2007-2009 Patrick McHardy
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
nvidia-modeset: Allocated GPU:0 (GPU-84f80bde-9fd7-b4f9-bf1b-af0fdeff3852) @ PCI:0000:01:00.0
ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170531/nsarguments-95)
fuse init (API version 7.26)
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
wlp4s0: authenticate with ba:de:f4:68:02:c0
wlp4s0: send auth to ba:de:f4:68:02:c0 (try 1/3)
wlp4s0: authenticated
wlp4s0: associate with ba:de:f4:68:02:c0 (try 1/3)
wlp4s0: RX AssocResp from ba:de:f4:68:02:c0 (capab=0x421 status=0 aid=1)
wlp4s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
rfkill: input handler disabled
r8169 0000:05:00.0 enp5s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
wlp4s0: deauthenticating from ba:de:f4:68:02:c0 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
rfkill: input handler enabled
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 446.949 msecs
PM: late suspend of devices complete after 0.477 msecs
PM: noirq suspend of devices complete after 72.309 msecs
ACPI: Preparing to enter system sleep state S3
ACPI: EC: event blocked
ACPI: EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
smpboot: CPU 4 is now offline
smpboot: CPU 5 is now offline
smpboot: CPU 6 is now offline
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
ACPI: EC: EC started
PM: Restoring platform NVS memory
Suspended for 5.272 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
microcode: microcode updated early to revision 0x5e, date = 2017-04-06
cache: parent cpu1 should not be sleeping
intel_pstate: Disabling energy efficiency optimization
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x1
cache: parent cpu4 should not be sleeping
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x3
cache: parent cpu5 should not be sleeping
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x5
cache: parent cpu6 should not be sleeping
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
cache: parent cpu7 should not be sleeping
CPU7 is up
ACPI: Waking up from system sleep state S3
ACPI: button: The lid device is not compliant to SW_LID.
PM: noirq resume of devices complete after 216.783 msecs
PM: early resume of devices complete after 0.589 msecs
ACPI: EC: event unblocked
sd 3:0:0:0: [sda] Starting disk
r8169 0000:05:00.0 enp5s0: link down
xhci_hcd 0000:00:14.0: port 0 resume PLC timeout
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: configured for UDMA/133
psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4712]
psmouse serio1: synaptics: queried min coordinates: x [1326..], y [1200..]
PM: resume of devices complete after 1432.596 msecs
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 1-1: USB disconnect, device number 2
done.
thermal thermal_zone3: failed to read out thermal zone (-5)
video LNXVIDEO:00: Restoring backlight state
usb 1-1: new full-speed USB device number 5 using xhci_hcd
rfkill: input handler disabled
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
r8169 0000:05:00.0 enp5s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
input: Corsair Corsair VOID Wireless Gaming Dongle as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.3/0003:1B1C:1B27.0007/input/input19
hid-generic 0003:1B1C:1B27.0007: input,hiddev0,hidraw0: USB HID v1.11 Device [Corsair Corsair VOID Wireless Gaming Dongle] on usb-0000:00:14.0-1/input3
r8169 0000:05:00.0 enp5s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp5s0: link becomes ready
WARNING! power/level is deprecated; use power/control instead
gvfsd-recent[21934]: segfault at 18 ip 00007f2c6774fc5e sp 00007ffe89a39370 error 4 in libgvfsdaemon.so[7f2c67740000+24000]
mmc0: cannot verify signal voltage switch
mmc0: new ultra high speed SDR104 SDXC card at address aaaa
mmcblk0: mmc0:aaaa SL64G 59.5 GiB
mmcblk0: p1
pool[13954]: segfault at 0 ip 00007f7871c0862e sp 00007f7856d24130 error 4 in libc-2.26.so[7f7871b8e000+1ae000]
perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79800
snd_hda_intel 0000:00:1f.3: Unstable LPIB (352800 >= 176400); disabling LPIB delay counting
usb 1-2: USB disconnect, device number 3
usb 1-2: new full-speed USB device number 6 using xhci_hcd
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1532:011B.0008/input/input20
hid-generic 0003:1532:011B.0008: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-2/input0
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:1532:011B.0009/input/input21
hid-generic 0003:1532:011B.0009: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-2/input1
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:1532:011B.000A/input/input22
hid-generic 0003:1532:011B.000A: input,hidraw3: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:14.0-2/input2
usb 1-2: USB disconnect, device number 6
perf: interrupt took too long (3129 > 3126), lowering kernel.perf_event_max_sample_rate to 63900
perf: interrupt took too long (3940 > 3911), lowering kernel.perf_event_max_sample_rate to 50700