dmesg - stu17i3_9
microcode: microcode updated early to revision 0x5e, date = 2017-04-06
Linux version 4.8.0-53-generic (buildd@lgw01-56) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #56~16.04.1-Ubuntu SMP Tue May 16 01:18:56 UTC 2017 (Ubuntu 4.8.0-53.56~16.04.1-generic 4.8.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000819e6fff] usable
BIOS-e820: [mem 0x00000000819e7000-0x00000000819e7fff] ACPI NVS
BIOS-e820: [mem 0x00000000819e8000-0x00000000819e8fff] reserved
BIOS-e820: [mem 0x00000000819e9000-0x0000000087c92fff] usable
BIOS-e820: [mem 0x0000000087c93000-0x00000000893befff] reserved
BIOS-e820: [mem 0x00000000893bf000-0x000000008940afff] ACPI data
BIOS-e820: [mem 0x000000008940b000-0x0000000089be5fff] ACPI NVS
BIOS-e820: [mem 0x0000000089be6000-0x0000000089ffdfff] reserved
BIOS-e820: [mem 0x0000000089ffe000-0x0000000089ffefff] usable
BIOS-e820: [mem 0x0000000089fff000-0x000000008e7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001707fffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: HP HP 290 G1 MT/8350, BIOS 02.01 04/20/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x170800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x89fff max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc20-0x000fcc2f] mapped at [ffff9aa7000fcc20]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9aa700096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x11143b000, 0x11143bfff] PGTABLE
BRK [0x11143c000, 0x11143cfff] PGTABLE
BRK [0x11143d000, 0x11143dfff] PGTABLE
BRK [0x11143e000, 0x11143efff] PGTABLE
BRK [0x11143f000, 0x11143ffff] PGTABLE
BRK [0x111440000, 0x111440fff] PGTABLE
BRK [0x111441000, 0x111441fff] PGTABLE
BRK [0x111442000, 0x111442fff] PGTABLE
BRK [0x111443000, 0x111443fff] PGTABLE
RAMDISK: [mem 0x32db2000-0x356d0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000893CE0B0 0000E4 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: FACP 0x00000000893FD8A0 000114 (v06 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: DSDT 0x00000000893CE228 02F675 (v02 HPQOEM SLIC-CPC 01072009 INTL 20160422)
ACPI: FACS 0x0000000089BE3C40 000040
ACPI: APIC 0x00000000893FD9B8 000084 (v03 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: FPDT 0x00000000893FDA40 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: MCFG 0x00000000893FDA88 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000893FDAC8 0003A3 (v01 HPQOEM SLIC-CPC 00001000 INTL 20160422)
ACPI: FIDT 0x00000000893FDE70 00009C (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: SSDT 0x00000000893FDF10 003176 (v02 HPQOEM SLIC-CPC 00003000 INTL 20160422)
ACPI: SSDT 0x0000000089401088 0025A5 (v02 HPQOEM SLIC-CPC 00001000 INTL 20160422)
ACPI: HPET 0x0000000089403630 000038 (v01 HPQOEM SLIC-CPC 00000001 MSFT 0000005F)
ACPI: SSDT 0x0000000089403668 000DE5 (v02 HPQOEM SLIC-CPC 00001000 INTL 20160422)
ACPI: SSDT 0x0000000089404450 000A2E (v02 HPQOEM SLIC-CPC 00000000 INTL 20160422)
ACPI: UEFI 0x0000000089404E80 000042 (v01 HPQOEM SLIC-CPC 00000002 01000013)
ACPI: SSDT 0x0000000089404EC8 000EDE (v02 HPQOEM SLIC-CPC 00003000 INTL 20160422)
ACPI: LPIT 0x0000000089405DA8 000094 (v01 HPQOEM SLIC-CPC 00000000 MSFT 0000005F)
ACPI: WSMT 0x0000000089405E40 000028 (v01 HPQOEM SLIC-CPC 00000000 MSFT 0000005F)
ACPI: SSDT 0x0000000089405E68 000141 (v02 HPQOEM SLIC-CPC 00000000 INTL 20160422)
ACPI: SSDT 0x0000000089405FB0 00029F (v02 HPQOEM SLIC-CPC 00000000 INTL 20160422)
ACPI: SSDT 0x0000000089406250 003002 (v02 HPQOEM SLIC-CPC 00001000 INTL 20160422)
ACPI: SSDT 0x0000000089409258 000517 (v02 HPQOEM SLIC-CPC 00000000 INTL 20160422)
ACPI: DBGP 0x0000000089409770 000034 (v01 HPQOEM SLIC-CPC 00000002 MSFT 0000005F)
ACPI: DBG2 0x00000000894097A8 000054 (v00 HPQOEM SLIC-CPC 00000002 MSFT 0000005F)
ACPI: DMAR 0x0000000089409800 0000A8 (v01 HPQOEM SLIC-CPC 00000001 INTL 00000001)
ACPI: DBGP 0x00000000894098A8 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI 00010013)
ACPI: SSDT 0x00000000894098E0 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20160422)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001707fffff]
NODE_DATA(0) allocated [mem 0x1707fb000-0x1707fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001707fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000819e6fff]
node 0: [mem 0x00000000819e9000-0x0000000087c92fff]
node 0: [mem 0x0000000089ffe000-0x0000000089ffefff]
node 0: [mem 0x0000000100000000-0x00000001707fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001707fffff]
On node 0 totalpages: 1016877
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 8627 pages used for memmap
DMA32 zone: 552082 pages, LIFO batch:31
Normal zone: 7200 pages used for memmap
Normal zone: 460800 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000008c800000-0x000000008e7fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x819e7000-0x819e7fff]
PM: Registered nosave memory: [mem 0x819e8000-0x819e8fff]
PM: Registered nosave memory: [mem 0x87c93000-0x893befff]
PM: Registered nosave memory: [mem 0x893bf000-0x8940afff]
PM: Registered nosave memory: [mem 0x8940b000-0x89be5fff]
PM: Registered nosave memory: [mem 0x89be6000-0x89ffdfff]
PM: Registered nosave memory: [mem 0x89fff000-0x8e7fffff]
PM: Registered nosave memory: [mem 0x8e800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x8e800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9aa870400000 s107864 r8192 d31400 u524288
pcpu-alloc: s107864 r8192 d31400 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000965
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3872116K/4067508K available (8829K kernel code, 1441K rwdata, 3836K rodata, 1548K init, 1296K bss, 195392K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 3900.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7800.00 BogoMIPS (lpj=15600000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 12 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff948ed000 - ffffffff948f5000)
ftrace: allocating 33454 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x00000089350000 end: 0x0000008936ffff
DMAR: RMRR base: 0x0000008c000000 end: 0x0000008e7fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-7100 CPU @ 3.90GHz (family: 0x6, model: 0x9e, stepping: 0x9)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 495090534 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (31200.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x819e7000-0x819e7fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8940b000-0x89be5fff] (8237056 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 11:36:49, date: 10/12/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 38 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AA86AA4C000 00079B (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AA86AB00C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AA86AA4D000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9AA86AB22C00 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x8e800000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:590f] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:5912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf12d000-0xdf12dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf12c000-0xdf12c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf12b000-0xdf12b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a116] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xdf004000-0xdf004fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0x819e7000-0x83ffffff]
e820: reserve RAM buffer [mem 0x87c93000-0x87ffffff]
e820: reserve RAM buffer [mem 0x89fff000-0x8bffffff]
e820: reserve RAM buffer [mem 0x170800000-0x173ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0800-0x087f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x8e800000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 42108K (ffff9aa732db2000 - ffff9aa7356d1000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x83c93000-0x87c93000] (64MB) mapped at [ffff9aa783c93000-ffff9aa787c92fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x706eb6a54e6, max_idle_ns: 881591026581 ns
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1507808209.624:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:1c.0:pcie002: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffb4db40800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x9E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [HPTZ] (30 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-53-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-53-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x906e9, pf=0x2, revision=0x5e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 890c85f7e22f136898a4920c18a4a187fdae3343'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:672:630
acpi PNP0C31:00: hash matches
rtc_cmos 00:03: setting system clock to 2017-10-12 11:36:49 UTC (1507808209)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1548K (ffffffff9476a000 - ffffffff948ed000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1396K (ffff9aa810aa3000 - ffff9aa810c00000)
Freeing unused kernel memory: 260K (ffff9aa810fbf000 - ffff9aa811000000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffb4db4079c000, 40:b0:34:3c:1c:84, XID 14100800 IRQ 126
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:02:00.0 enp2s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b100 irq 125
ata2: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b180 irq 125
ata3: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b200 irq 125
ata4: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b280 irq 125
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 500000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: Direct firmware load for i915/kbl_dmc_ver1_01.bin failed with error -2
i915 0000:00:02.0: Failed to load DMC firmware [], disabling runtime power management.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GuC firmware load skipped
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-1: new low-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ATA-9: TOSHIBA DT01ACA050, MS1OA800, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ATAPI: hp HLDS DVDRW GUD1N, LD02, max UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TOSHIBA DT01ACA0 A800 PQ: 0 ANSI: 5
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM hp HLDS DVDRW GUD1N LD02 PQ: 0 ANSI: 5
usb 1-1: New USB device found, idVendor=03f0, idProduct=094a
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: HP USB Optical Mouse
usb 1-1: Manufacturer: PixArt
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:03F0:094A.0001/input/input7
hid-generic 0003:03F0:094A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.0-1/input0
sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-2: new low-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=04f2, idProduct=1516
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Keyboard
usb 1-2: Manufacturer: Chicony
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04F2:1516.0002/input/input8
hid-generic 0003:04F2:1516.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:14.0-2/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04F2:1516.0003/input/input9
random: fast init done
hid-generic 0003:04F2:1516.0003: input,hidraw2: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:14.0-2/input1
raid6: sse2x1 gen() 11456 MB/s
raid6: sse2x1 xor() 7024 MB/s
raid6: sse2x2 gen() 13683 MB/s
raid6: sse2x2 xor() 9361 MB/s
raid6: sse2x4 gen() 15918 MB/s
raid6: sse2x4 xor() 10803 MB/s
raid6: avx2x1 gen() 27007 MB/s
raid6: avx2x2 gen() 31212 MB/s
raid6: avx2x4 gen() 34184 MB/s
raid6: using algorithm avx2x4 gen() 34184 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function: avx
Btrfs loaded, crc32c=crc32c-intel
[drm] RC6 on
random: crng init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[348]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
input: HP WMI hotkeys as /devices/virtual/input/input10
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
snd_hda_codec_conexant hdaudioC0D0: CX20632: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20632: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=1 (0x1f/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1a
snd_hda_codec_conexant hdaudioC0D0: Line=0x1d
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
Adding 4986876k swap on /dev/sda2. Priority:-1 extents:1 across:4986876k FS
audit: type=1400 audit(1507808226.268:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1507808226.268:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1507808226.268:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1507808226.268:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=754 comm="apparmor_parser"
audit: type=1400 audit(1507808226.304:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=756 comm="apparmor_parser"
audit: type=1400 audit(1507808226.304:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=758 comm="apparmor_parser"
audit: type=1400 audit(1507808226.304:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=757 comm="apparmor_parser"
audit: type=1400 audit(1507808226.304:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=757 comm="apparmor_parser"
audit: type=1400 audit(1507808226.304:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=757 comm="apparmor_parser"
audit: type=1400 audit(1507808226.308:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=753 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 684.798 msecs
PM: late suspend of devices complete after 21.833 msecs
r8169 0000:02:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.972 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 125
smpboot: CPU 1 is now offline
Broke affinity for irq 123
Broke affinity for irq 124
Broke affinity for irq 125
Broke affinity for irq 126
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 8
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 122
Broke affinity for irq 123
Broke affinity for irq 124
Broke affinity for irq 125
Broke affinity for irq 126
Broke affinity for irq 127
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 37.342 msecs
PM: early resume of devices complete after 60.013 msecs
r8169 0000:02:00.0: System wakeup disabled by ACPI
rtc_cmos 00:03: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[drm] GuC firmware load skipped
r8169 0000:02:00.0 enp2s0: link down
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20160422/dsopcode-236)
ACPI Error: Method parse/execution failed [\HWMC] (Node ffff9aa86b8f62f8), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff9aa86b8f8848), AE_AML_BUFFER_LIMIT (20160422/psparse-542)
PM: resume of devices complete after 234.994 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata3.00: configured for UDMA/100
[drm] RC6 on
r8169 0000:02:00.0 enp2s0: link up
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata1.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
usb 1-8: new high-speed USB device number 4 using xhci_hcd
usb 1-8: New USB device found, idVendor=0951, idProduct=1666
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: DataTraveler 3.0
usb 1-8: Manufacturer: Kingston
usb 1-8: SerialNumber: 408D5C1653D4B091290A840E
usb-storage 1-8:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-8:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 60632064 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 1-8: USB disconnect, device number 4
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
perf: interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
perf: interrupt took too long (3188 > 3172), lowering kernel.perf_event_max_sample_rate to 62500
perf: interrupt took too long (4023 > 3985), lowering kernel.perf_event_max_sample_rate to 49500
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up
[drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting
perf: interrupt took too long (5037 > 5028), lowering kernel.perf_event_max_sample_rate to 39500
perf: interrupt took too long (6310 > 6296), lowering kernel.perf_event_max_sample_rate to 31500