dmesg - iozone-nvme-benchmark
Linux version 4.11.0-kfd-compute-rocm-rel-1.6-148 (jenkins@jenkins-raptor-5) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Wed Aug 23 12:00:35 CDT 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000dcce7fff] usable
BIOS-e820: [mem 0x00000000dcce8000-0x00000000dce28fff] reserved
BIOS-e820: [mem 0x00000000dce29000-0x00000000dcf22fff] usable
BIOS-e820: [mem 0x00000000dcf23000-0x00000000dd2f6fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd2f7000-0x00000000de32afff] reserved
BIOS-e820: [mem 0x00000000de32b000-0x00000000de3e8fff] type 20
BIOS-e820: [mem 0x00000000de3e9000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.60 by American Megatrends
efi: ACPI 2.0=0xdcf23000 ACPI=0xdcf23000 SMBIOS=0xde29a000 ESRT=0xdaafee18 MEMATTR=0xdaa7a018
SMBIOS 3.0 present.
DMI: Micro-Star International Co., Ltd MS-7A32/X370 GAMING PRO CARBON (MS-7A32), BIOS 1.80 07/27/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF000000 mask FFFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 3568M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000daafee18 to 0x00000000daafee50.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8d3640096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x3b221f000, 0x3b221ffff] PGTABLE
BRK [0x3b2220000, 0x3b2220fff] PGTABLE
BRK [0x3b2221000, 0x3b2221fff] PGTABLE
BRK [0x3b2222000, 0x3b2222fff] PGTABLE
BRK [0x3b2223000, 0x3b2223fff] PGTABLE
BRK [0x3b2224000, 0x3b2224fff] PGTABLE
BRK [0x3b2225000, 0x3b2225fff] PGTABLE
BRK [0x3b2226000, 0x3b2226fff] PGTABLE
BRK [0x3b2227000, 0x3b2227fff] PGTABLE
BRK [0x3b2228000, 0x3b2228fff] PGTABLE
BRK [0x3b2229000, 0x3b2229fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x32c4c000-0x3561dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DCF23000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DCF23090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DCF290D8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
ACPI: DSDT 0x00000000DCF231D0 005F08 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DD2E0E00 000040
ACPI: APIC 0x00000000DCF291F0 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DCF292D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DCF29318 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCF293B8 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DCF32008 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DCF32F58 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DCF32F88 0017D2 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DCF34760 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DCF347A0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DCF347D8 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DCF34800 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000DCF34848 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: BGRT 0x00000000DCF34918 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCF34950 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DCF34A48 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f37c000-0x41f37ffff]
Zone ranges:
DMA32 [mem 0x0000000000001000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
node 0: [mem 0x000000000a000000-0x00000000dcce7fff]
node 0: [mem 0x00000000dce29000-0x00000000dcf22fff]
node 0: [mem 0x00000000de3e9000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4180632
DMA32 zone: 14173 pages used for memmap
DMA32 zone: 27 pages reserved
DMA32 zone: 907032 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
PM: Registered nosave memory: [mem 0xdcce8000-0xdce28fff]
PM: Registered nosave memory: [mem 0xdcf23000-0xdd2f6fff]
PM: Registered nosave memory: [mem 0xdd2f7000-0xde32afff]
PM: Registered nosave memory: [mem 0xde32b000-0xde3e8fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 38 pages/cpu @ffff8d3a4e600000 s115416 r8192 d32040 u262144
pcpu-alloc: s115416 r8192 d32040 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115282
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16283008K/16722528K available (8622K kernel code, 1454K rwdata, 3784K rodata, 1588K init, 1132K bss, 439520K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:1096 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3799.816 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.63 BogoMIPS (lpj=15199264)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 33624 entries in 132 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 7 1700X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events: Fam17h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (121300.49 BogoMIPS)
sched_clock: Marking stable (680000000, 0)->(938258591, -258258591)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdcf23000-0xdd2f6fff] (4014080 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 18:37:48, date: 10/01/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.1: [1022:1453] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: System wakeup disabled by ACPI
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:01:00.0: [144d:a804] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0xfe900000-0xfe903fff 64bit]
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe3a0000-0xfe3a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfe380000-0xfe39ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfe300000-0xfe37ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-23]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe000000-0xfe3fffff]
pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D3hot D3cold
pci 0000:04:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D3hot D3cold
pci 0000:04:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:03.0: PME# supported from D3hot D3cold
pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D3hot D3cold
pci 0000:04:08.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:08.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 04-23]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xfe000000-0xfe2fffff]
pci 0000:1e:00.0: [8086:1539] type 00 class 0x020000
pci 0000:1e:00.0: reg 0x10: [mem 0xfe200000-0xfe21ffff]
pci 0000:1e:00.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:1e:00.0: reg 0x1c: [mem 0xfe220000-0xfe223fff]
pci 0000:1e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: PCI bridge to [bus 1e]
pci 0000:04:00.0: bridge window [io 0xf000-0xffff]
pci 0000:04:00.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:04:01.0: PCI bridge to [bus 1f]
pci 0000:20:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:20:00.0: reg 0x10: [mem 0xfe100000-0xfe101fff 64bit]
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:02.0: PCI bridge to [bus 20]
pci 0000:04:02.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:04:03.0: PCI bridge to [bus 21]
pci 0000:04:04.0: PCI bridge to [bus 22]
pci 0000:23:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:23:00.0: reg 0x10: [mem 0xfe000000-0xfe007fff 64bit]
pci 0000:23:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:08.0: PCI bridge to [bus 23]
pci 0000:04:08.0: bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:24:00.0: [1002:67df] type 00 class 0x030000
pci 0000:24:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:24:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:24:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:24:00.0: reg 0x24: [mem 0xfe800000-0xfe83ffff]
pci 0000:24:00.0: reg 0x30: [mem 0xfe840000-0xfe85ffff pref]
pci 0000:24:00.0: supports D1 D2
pci 0000:24:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:24:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:24:00.1: reg 0x10: [mem 0xfe860000-0xfe863fff 64bit]
pci 0000:24:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 24]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:25:00.0: [1022:145a] type 00 class 0x130000
pci 0000:25:00.2: [1022:1456] type 00 class 0x108000
pci 0000:25:00.2: reg 0x18: [mem 0xfe500000-0xfe5fffff]
pci 0000:25:00.2: reg 0x24: [mem 0xfe600000-0xfe601fff]
pci 0000:25:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:25:00.3: reg 0x10: [mem 0xfe400000-0xfe4fffff 64bit]
pci 0000:25:00.3: PME# supported from D0 D3hot D3cold
pci 0000:25:00.3: System wakeup disabled by ACPI
pci 0000:00:07.1: PCI bridge to [bus 25]
pci 0000:00:07.1: bridge window [mem 0xfe400000-0xfe6fffff]
pci 0000:26:00.0: [1022:1455] type 00 class 0x130000
pci 0000:26:00.2: [1022:7901] type 00 class 0x010601
pci 0000:26:00.2: reg 0x24: [mem 0xfe708000-0xfe708fff]
pci 0000:26:00.2: PME# supported from D3hot D3cold
pci 0000:26:00.3: [1022:1457] type 00 class 0x040300
pci 0000:26:00.3: reg 0x10: [mem 0xfe700000-0xfe707fff]
pci 0000:26:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 26]
pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
pci 0000:24:00.0: vgaarb: setting as boot VGA device
pci 0000:24:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:24:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdcce8000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdcf23000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b0f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.1: PCI bridge to [bus 01]
pci 0000:00:01.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:00.0: PCI bridge to [bus 1e]
pci 0000:04:00.0: bridge window [io 0xf000-0xffff]
pci 0000:04:00.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:04:01.0: PCI bridge to [bus 1f]
pci 0000:04:02.0: PCI bridge to [bus 20]
pci 0000:04:02.0: bridge window [mem 0xfe100000-0xfe1fffff]
pci 0000:04:03.0: PCI bridge to [bus 21]
pci 0000:04:04.0: PCI bridge to [bus 22]
pci 0000:04:08.0: PCI bridge to [bus 23]
pci 0000:04:08.0: bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:03:00.2: PCI bridge to [bus 04-23]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xfe000000-0xfe2fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-23]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe000000-0xfe3fffff]
pci 0000:00:03.1: PCI bridge to [bus 24]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 25]
pci 0000:00:07.1: bridge window [mem 0xfe400000-0xfe6fffff]
pci 0000:00:08.1: PCI bridge to [bus 26]
pci 0000:00:08.1: bridge window [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfe000000-0xfe3fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe2fffff]
pci_bus 0000:1e: resource 0 [io 0xf000-0xffff]
pci_bus 0000:1e: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:20: resource 1 [mem 0xfe100000-0xfe1fffff]
pci_bus 0000:23: resource 1 [mem 0xfe000000-0xfe0fffff]
pci_bus 0000:24: resource 0 [io 0xe000-0xefff]
pci_bus 0000:24: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:24: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:25: resource 1 [mem 0xfe400000-0xfe6fffff]
pci_bus 0000:26: resource 1 [mem 0xfe700000-0xfe7fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:24:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 42824K
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.1 to group 1
iommu: Adding device 0000:00:01.3 to group 2
iommu: Adding device 0000:00:02.0 to group 3
iommu: Adding device 0000:00:03.0 to group 4
iommu: Adding device 0000:00:03.1 to group 5
iommu: Adding device 0000:00:04.0 to group 6
iommu: Adding device 0000:00:07.0 to group 7
iommu: Adding device 0000:00:07.1 to group 7
iommu: Adding device 0000:00:08.0 to group 8
iommu: Adding device 0000:00:08.1 to group 8
iommu: Adding device 0000:00:14.0 to group 9
iommu: Adding device 0000:00:14.3 to group 9
iommu: Adding device 0000:00:18.0 to group 10
iommu: Adding device 0000:00:18.1 to group 10
iommu: Adding device 0000:00:18.2 to group 10
iommu: Adding device 0000:00:18.3 to group 10
iommu: Adding device 0000:00:18.4 to group 10
iommu: Adding device 0000:00:18.5 to group 10
iommu: Adding device 0000:00:18.6 to group 10
iommu: Adding device 0000:00:18.7 to group 10
iommu: Adding device 0000:01:00.0 to group 11
iommu: Adding device 0000:03:00.0 to group 12
iommu: Adding device 0000:03:00.1 to group 12
iommu: Adding device 0000:03:00.2 to group 12
iommu: Adding device 0000:04:00.0 to group 12
iommu: Adding device 0000:04:01.0 to group 12
iommu: Adding device 0000:04:02.0 to group 12
iommu: Adding device 0000:04:03.0 to group 12
iommu: Adding device 0000:04:04.0 to group 12
iommu: Adding device 0000:04:08.0 to group 12
iommu: Adding device 0000:1e:00.0 to group 12
iommu: Adding device 0000:20:00.0 to group 12
iommu: Adding device 0000:23:00.0 to group 12
iommu: Adding device 0000:24:00.0 to group 13
iommu: Using direct mapping for device 0000:24:00.0
iommu: Adding device 0000:24:00.1 to group 13
iommu: Adding device 0000:25:00.0 to group 7
iommu: Adding device 0000:25:00.2 to group 7
iommu: Adding device 0000:25:00.3 to group 7
iommu: Adding device 0000:26:00.0 to group 8
iommu: Adding device 0000:26:00.2 to group 8
iommu: Adding device 0000:26:00.3 to group 8
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features (0xf77ef22294ada):
PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
perf: AMD LLC counters detected
perf: amd_iommu: Detected. (0 banks, 0 counters/bank)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1506883068.260:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
io scheduler mq-deadline registered
pcieport 0000:00:01.1: AER enabled with IRQ 284
pcieport 0000:00:01.3: AER enabled with IRQ 285
pcieport 0000:00:03.1: AER enabled with IRQ 286
pcieport 0000:00:01.1: Signaling PME with IRQ 284
pcieport 0000:00:01.3: Signaling PME with IRQ 285
pcieport 0000:00:03.1: Signaling PME with IRQ 286
pcieport 0000:00:07.1: Signaling PME with IRQ 287
pcieport 0000:00:08.1: Signaling PME with IRQ 289
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-148 xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-148 xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:23:00.0: xHCI Host Controller
xhci_hcd 0000:23:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:23:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-148 xhci-hcd
usb usb3: SerialNumber: 0000:23:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:23:00.0: xHCI Host Controller
xhci_hcd 0000:23:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-148 xhci-hcd
usb usb4: SerialNumber: 0000:23:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:25:00.3: xHCI Host Controller
xhci_hcd 0000:25:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:25:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-148 xhci-hcd
usb usb5: SerialNumber: 0000:25:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:25:00.3: xHCI Host Controller
xhci_hcd 0000:25:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.11.0-kfd-compute-rocm-rel-1.6-148 xhci-hcd
usb usb6: SerialNumber: 0000:25:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x08001126
microcode: CPU1: patch_level=0x08001126
microcode: CPU2: patch_level=0x08001126
microcode: CPU3: patch_level=0x08001126
microcode: CPU4: patch_level=0x08001126
microcode: CPU5: patch_level=0x08001126
microcode: CPU6: patch_level=0x08001126
microcode: CPU7: patch_level=0x08001126
microcode: CPU8: patch_level=0x08001126
microcode: CPU9: patch_level=0x08001126
microcode: CPU10: patch_level=0x08001126
microcode: CPU11: patch_level=0x08001126
microcode: CPU12: patch_level=0x08001126
microcode: CPU13: patch_level=0x08001126
microcode: CPU14: patch_level=0x08001126
microcode: CPU15: patch_level=0x08001126
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e6b419d65be3cfa1fc2fa5d1dee5b2af2e2a63c2'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:589:644
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:02: setting system clock to 2017-10-01 18:37:48 UTC (1506883068)
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1588K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1604K
Freeing unused kernel memory: 312K
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
wmi: Mapper loaded
nvme nvme0: pci function 0000:01:00.0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host0: ahci
PTP clock support registered
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
dca service started, version 1.12.1
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380100 irq 306
ata2: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380180 irq 306
ata3: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380200 irq 306
ata4: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380280 irq 306
ata5: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380300 irq 306
ata6: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380380 irq 306
ata7: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380400 irq 306
ata8: SATA max UDMA/133 abar m131072@0xfe380000 port 0xfe380480 irq 306
ahci 0000:26:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:26:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe708000 port 0xfe708100 irq 308
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Parsing CRAT table with 0 nodes
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to amdgpudrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1682:0x9480 0xC7).
amdgpu 0000:24:00.0: valid rang is between 4 and 9
[drm] register mmio base: 0xFE800000
[drm] register mmio size: 262144
[drm] probing gen 2 caps for device 1022:1453 = 733903/e
[drm] probing mlw for device 1022:1453 = 733903
[drm] UVD is enabled in VM mode
[drm] VCE enabled in VM mode
amdgpu 0000:24:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: 113-XFXD009-100
[drm] GPU post is not needed
[drm] vm size is 64 GB, block size is 13-bit, fragment size is 4-bit
amdgpu 0000:24:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
amdgpu 0000:24:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 15412860 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 16055M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
amdgpu 0000:24:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
usb 1-9: new high-speed USB device number 2 using xhci_hcd
amdgpu: [powerplay] amdgpu: powerplay sw initialized
[drm] Chained IB support enabled!
amdgpu 0000:24:00.0: fence driver on ring 0 use gpu addr 0x0000000000400008, cpu addr 0xffff8d3a411cd008
amdgpu 0000:24:00.0: fence driver on ring 1 use gpu addr 0x0000000000400018, cpu addr 0xffff8d3a411cd018
amdgpu 0000:24:00.0: fence driver on ring 2 use gpu addr 0x0000000000400028, cpu addr 0xffff8d3a411cd028
amdgpu 0000:24:00.0: fence driver on ring 3 use gpu addr 0x0000000000400038, cpu addr 0xffff8d3a411cd038
amdgpu 0000:24:00.0: fence driver on ring 4 use gpu addr 0x0000000000400048, cpu addr 0xffff8d3a411cd048
amdgpu 0000:24:00.0: fence driver on ring 5 use gpu addr 0x0000000000400058, cpu addr 0xffff8d3a411cd058
amdgpu 0000:24:00.0: fence driver on ring 6 use gpu addr 0x0000000000400068, cpu addr 0xffff8d3a411cd068
amdgpu 0000:24:00.0: fence driver on ring 7 use gpu addr 0x0000000000400078, cpu addr 0xffff8d3a411cd078
amdgpu 0000:24:00.0: fence driver on ring 8 use gpu addr 0x0000000000400088, cpu addr 0xffff8d3a411cd088
amdgpu 0000:24:00.0: fence driver on ring 9 use gpu addr 0x000000000040009c, cpu addr 0xffff8d3a411cd09c
amdgpu 0000:24:00.0: fence driver on ring 10 use gpu addr 0x00000000004000ac, cpu addr 0xffff8d3a411cd0ac
amdgpu 0000:24:00.0: fence driver on ring 11 use gpu addr 0x00000000004000bc, cpu addr 0xffff8d3a411cd0bc
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:24:00.0: fence driver on ring 12 use gpu addr 0x000000f4002ad420, cpu addr 0xffffb27e8345a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:24:00.0: fence driver on ring 13 use gpu addr 0x00000000004000dc, cpu addr 0xffff8d3a411cd0dc
amdgpu 0000:24:00.0: fence driver on ring 14 use gpu addr 0x00000000004000ec, cpu addr 0xffff8d3a411cd0ec
nvme0n1: p1 p2 p3
pps pps0: new PPS source ptp0
igb 0000:1e:00.0: added PHC on eth0
igb 0000:1e:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:1e:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 30:9c:23:07:56:2e
igb 0000:1e:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:1e:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
amdgpu: [powerplay] Can't find requested voltage id in vdd_dep_on_sclk table!
[drm] DAL is enabled
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 60800
[drm] DM_PPLIB: 91000
[drm] DM_PPLIB: 107700
[drm] DM_PPLIB: 114500
[drm] DM_PPLIB: 119100
[drm] DM_PPLIB: 123600
[drm] DM_PPLIB: 128800
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing engine clock level from 8 to 2
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 30000
[drm] DM_PPLIB: 200000
[drm] DM_PPLIB: Warning: using default validation clocks!
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 72000
[drm] DM_PPLIB: memory_max_clock: 80000
[drm] DM_PPLIB: level : 0
[drm] DM_PPLIB: reducing memory clock level from 2 to 1
[drm] DC: create_links: connectors_num: physical:4, virtual:0
[drm] Connector[0] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC1 [1]
[drm] Connector[1] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC3 [3]
[drm] Connector[2] description:signal 32
[drm] Using channel: CHANNEL_ID_DDC2 [2]
[drm] Connector[3] description:signal 4
[drm] Using channel: CHANNEL_ID_DDC4 [4]
igb 0000:1e:00.0 enp30s0: renamed from eth0
[drm] Display Core initialized
[drm] amdgpu: freesync_module init done ffff8d3a40ad0020.
[drm] link=0, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=0: dc_sink didn't change.
[drm] [Detect] [DP][ConnIdx:1] DP-DVI passive dongle 165Mhz: 20 EA AC 40 3A 8D FF FF 48 AA 0E 4B 3A 8D FF FF E8 77 D2 82 7E B2 FF FF BA 27 69 C0 FF FF FF FF ^
ata9: SATA link down (SStatus 0 SControl 300)
[drm] SADs count is: -2, don't need to read it
[drm] [Detect] [DVI][ConnIdx:1] VE228: [Block 0] 00 FF FF FF FF FF FF 00 04 69 FA 22 01 01 01 01 18 18 01 03 80 30 1B 78 EA 3D 25 A3 59 51 A0 25 0F 50 54 BF EF 00 71 4F 81 80 81 40 95 00 A9 40 B3 00 D1 C0 01 01 02 3A 80 18 71 38 2D 40 58 2C 45 00 DD 0C 11 00 00 1E 00 00 00 FD 00 32 4C 1E 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC 00 56 45 32 32 38 0A 20 20 20 20 20 20 20 00 00 00 FF 00 45 36 4C 4D 51 53 30 36 33 30 30 30 0A 00 64 ^
[drm] dc_link_detect: manufacturer_id = 6904, product_id = 22FA, serial_number = 1010101, manufacture_week = 24, manufacture_year = 24, display_name = VE228, speaker_flag = 0, audio_mode_count = 0
[drm] link=1, dc_sink_in=ffff8d3a40987c00 is now Connected
[drm] DCHPD: connector_id=1: Old sink= (null) New sink=ffff8d3a40987c00
[drm] [Detect] [DP][ConnIdx:2] Rx Caps: 11 0A 82 01 00 03 01 81 00 00 00 00 00 00 00 ^
[drm] [LKTN] [DP][ConnIdx:2] HBRx2 pass VS=0, PE=0^
usb 1-9: New USB device found, idVendor=1a40, idProduct=0101
usb 1-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-9: Product: USB 2.0 Hub
hub 1-9:1.0: USB hub found
hub 1-9:1.0: 4 ports detected
[drm] SADs count is: -2, don't need to read it
[drm] [Detect] [DP][ConnIdx:2] DELL S2009W: [Block 0] 00 FF FF FF FF FF FF 00 10 AC 44 A0 53 52 59 32 0F 13 01 03 0E 2C 19 78 EE EE 91 A3 54 4C 99 26 0F 50 54 A5 4B 00 71 4F 81 80 A9 C0 01 01 01 01 01 01 01 01 01 01 2F 26 40 A0 60 84 1A 30 30 20 35 00 BB F9 10 00 00 1A 00 00 00 FF 00 57 36 34 38 4A 39 34 39 32 59 52 53 0A 00 00 00 FC 00 44 45 4C 4C 20 53 32 30 30 39 57 0A 20 00 00 00 FD 00 38 4C 1E 53 0E 00 0A 20 20 20 20 20 20 00 71 ^
[drm] dc_link_detect: manufacturer_id = AC10, product_id = A044, serial_number = 32595253, manufacture_week = 15, manufacture_year = 19, display_name = DELL S2009W, speaker_flag = 0, audio_mode_count = 0
[drm] link=2, dc_sink_in=ffff8d3a40986800 is now Connected
[drm] DCHPD: connector_id=2: Old sink= (null) New sink=ffff8d3a40986800
[drm] link=3, dc_sink_in= (null) is now Disconnected
[drm] DCHPD: connector_id=3: dc_sink didn't change.
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] KMS initialized.
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 9 succeeded in 9 usecs
[drm] ring test on 1 succeeded in 7 usecs
[drm] ring test on 2 succeeded in 17 usecs
[drm] ring test on 3 succeeded in 10 usecs
[drm] ring test on 4 succeeded in 10 usecs
[drm] ring test on 5 succeeded in 9 usecs
[drm] ring test on 6 succeeded in 10 usecs
[drm] ring test on 7 succeeded in 9 usecs
[drm] ring test on 8 succeeded in 9 usecs
[drm] ring test on 10 succeeded in 5 usecs
[drm] ring test on 11 succeeded in 5 usecs
[drm] ring test on 12 succeeded in 1 usecs
[drm] UVD initialized successfully.
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[drm] ring test on 13 succeeded in 5 usecs
[drm] ring test on 14 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] dc_link_handle_hpd_rx_irq: Got short pulse HPD on link 2
ata1.00: ATA-8: TOSHIBA HDWE160, FS2A, max UDMA/100
ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA TOSHIBA HDWE160 FS2A PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-9.3: new high-speed USB device number 3 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3800.005 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cb9ac453, max_idle_ns: 881591099559 ns
usb 1-9.3: New USB device found, idVendor=05e3, idProduct=0608
usb 1-9.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-9.3: Product: USB2.0 Hub
hub 1-9.3:1.0: USB hub found
hub 1-9.3:1.0: 2 ports detected
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-9.4: new low-speed USB device number 4 using xhci_hcd
ata2: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] ib test on ring 13 succeeded
[drm] fb mappable at 0xE04B7000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
[drm] Atomic commit: SET crtc id 0: [ffff8d3a4201a000]
[drm] Atomic commit: SET crtc id 1: [ffff8d3a4201d000]
[drm] dc_commit_streams: 2 streams
[drm] core_stream 0x4b8ed800: src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080, colorSpace:1
[drm] pix_clk_khz: 148500, h_total: 2200, v_total: 1125, pixelencoder:1, displaycolorDepth:2
[drm] link: 1
[drm] core_stream 0x4b8edc00: src: 0, 0, 1600, 900; dst: 0, 0, 1600, 900, colorSpace:1
[drm] pix_clk_khz: 97750, h_total: 1760, v_total: 926, pixelencoder:1, displaycolorDepth:2
[drm] link: 2
[drm] Link: 2 eDP panel mode supported: 0 eDP panel mode enabled: 0
[drm] [LKTN] [DP][ConnIdx:2] HBRx2 pass VS=0, PE=0^
[drm] [Mode] [DVI][ConnIdx:1] {1920x1080, 2200x1125@148500Khz}^
[drm] [Mode] [DP][ConnIdx:2] {1600x900, 1760x926@97750Khz}^
Console: switching to colour frame buffer device 200x56
amdgpu 0000:24:00.0: fb0: amdgpudrmfb frame buffer device
kfd kfd: Allocated 3969056 bytes on gart for device 1002:67df
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x67df:0x1002]
kfd kfd: Reserved 2 pages for cwsr.
kfd kfd: added device 1002:67df
[drm] Initialized amdgpu 3.18.0 20150101 for 0000:24:00.0 on minor 0
usb 1-9.4: New USB device found, idVendor=0c45, idProduct=7605
usb 1-9.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9.4: Product: Das Keyboard
usb 1-9.4: Manufacturer:
hidraw: raw HID events driver (C) Jiri Kosina
ata3: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Das Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.4/1-9.4:1.0/0003:0C45:7605.0001/input/input2
hid-generic 0003:0C45:7605.0001: input,hidraw0: USB HID v1.00 Keyboard [ Das Keyboard] on usb-0000:03:00.0-9.4/input0
input: Das Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.4/1-9.4:1.1/0003:0C45:7605.0002/input/input3
usb 1-9.3.1: new full-speed USB device number 5 using xhci_hcd
hid-generic 0003:0C45:7605.0002: input,hidraw1: USB HID v1.00 Device [ Das Keyboard] on usb-0000:03:00.0-9.4/input1
random: fast init done
ata4: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
usb 1-9.3.1: New USB device found, idVendor=1b80, idProduct=b40c
usb 1-9.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-9.3.1: Product: USB Gaming Mouse
usb 1-9.3.1: Manufacturer: E-Signal
input: E-Signal USB Gaming Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.3/1-9.3.1/1-9.3.1:1.0/0003:1B80:B40C.0003/input/input4
hid-generic 0003:1B80:B40C.0003: input,hidraw2: USB HID v1.10 Mouse [E-Signal USB Gaming Mouse] on usb-0000:03:00.0-9.3.1/input0
input: E-Signal USB Gaming Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.3/1-9.3.1/1-9.3.1:1.1/0003:1B80:B40C.0004/input/input5
hid-generic 0003:1B80:B40C.0004: input,hiddev0,hidraw3: USB HID v1.10 Keyboard [E-Signal USB Gaming Mouse] on usb-0000:03:00.0-9.3.1/input1
hid-generic 0003:1B80:B40C.0005: hiddev0,hidraw4: USB HID v1.10 Device [E-Signal USB Gaming Mouse] on usb-0000:03:00.0-9.3.1/input2
ata5: failed to resume link (SControl 0)
ata5: SATA link down (SStatus 0 SControl 0)
ata6: failed to resume link (SControl 0)
ata6: SATA link down (SStatus 0 SControl 0)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata7.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: [sdb] 4096-byte physical blocks
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
raid6: sse2x1 gen() 8045 MB/s
raid6: sse2x1 xor() 8033 MB/s
raid6: sse2x2 gen() 16465 MB/s
raid6: sse2x2 xor() 10936 MB/s
raid6: sse2x4 gen() 17532 MB/s
raid6: sse2x4 xor() 10105 MB/s
raid6: avx2x1 gen() 17856 MB/s
raid6: avx2x1 xor() 14196 MB/s
raid6: avx2x2 gen() 23556 MB/s
raid6: avx2x2 xor() 15085 MB/s
raid6: avx2x4 gen() 23704 MB/s
raid6: avx2x4 xor() 13763 MB/s
raid6: using algorithm avx2x4 gen() 23704 MB/s
raid6: .... xor() 13763 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function avx
Btrfs loaded, crc32c=crc32c-intel
BTRFS: device label DAv4 devid 1 transid 729 /dev/sdb1
BTRFS: device label Vault devid 1 transid 694 /dev/sda1
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
random: crng init done
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
systemd-journald[485]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Adding 16721916k swap on /dev/nvme0n1p3. Priority:-1 extents:1 across:16721916k SSFS
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
ccp 0000:25:00.2: enabling device (0000 -> 0002)
ccp 0000:25:00.2: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:20:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-27.ucode failed with error -2
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
iwlwifi 0000:20:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2
iwlwifi 0000:20:00.0: loaded firmware version 21.302800.0 op_mode iwlmvm
iwlwifi 0000:20:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
iwlwifi 0000:20:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:20:00.0: L1 Disabled - LTR Disabled
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_hda_intel 0000:24:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:24:00.1: Force to non-snoop mode
snd_hda_intel 0000:26:00.3: enabling device (0000 -> 0002)
EDAC MC: Ver: 3.0.0
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:24:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:24:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:24:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:24:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:24:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:24:00.1/sound/card0/input11
MCE: In-kernel MCE decoding enabled.
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input13
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input14
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input15
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input16
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input17
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:26:00.3/sound/card1/input18
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal thermal_zone0: failed to read out thermal zone (-5)
iwlwifi 0000:20:00.0 wlp32s0: renamed from wlan0
audit: type=1400 audit(1506883075.164:2): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=989 comm="apparmor_parser"
audit: type=1400 audit(1506883075.196:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=986 comm="apparmor_parser"
audit: type=1400 audit(1506883075.208:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=990 comm="apparmor_parser"
audit: type=1400 audit(1506883075.216:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=992 comm="apparmor_parser"
audit: type=1400 audit(1506883075.260:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=993 comm="apparmor_parser"
audit: type=1400 audit(1506883075.260:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=993 comm="apparmor_parser"
audit: type=1400 audit(1506883075.268:8): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=982 comm="apparmor_parser"
audit: type=1400 audit(1506883075.268:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=982 comm="apparmor_parser"
audit: type=1400 audit(1506883075.268:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=982 comm="apparmor_parser"
audit: type=1400 audit(1506883075.268:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=982 comm="apparmor_parser"
new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp32s0: link is not ready
iwlwifi 0000:20:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:20:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:20:00.0: L1 Disabled - LTR Disabled
iwlwifi 0000:20:00.0: L1 Disabled - LTR Disabled
IPv6: ADDRCONF(NETDEV_UP): wlp32s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp32s0: link is not ready
igb 0000:1e:00.0 enp30s0: igb: enp30s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp30s0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
wlp32s0: authenticate with c0:c1:c0:a9:6c:01
wlp32s0: send auth to c0:c1:c0:a9:6c:01 (try 1/3)
wlp32s0: authenticated
wlp32s0: associate with c0:c1:c0:a9:6c:01 (try 1/3)
wlp32s0: RX AssocResp from c0:c1:c0:a9:6c:01 (capab=0x11 status=0 aid=1)
wlp32s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp32s0: link becomes ready
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
BTRFS info (device sdb1): disk space caching is enabled
BTRFS info (device sdb1): has skinny extents