dmesg - cpu

Return To cpu System Information

Linux version 4.10.0-33-generic (buildd@lgw01-52) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #37-Ubuntu SMP Fri Aug 11 10:55:28 UTC 2017 (Ubuntu 4.10.0-33.37-generic 4.10.17)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=/dev/mapper/hawkeye--vg-root ro
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
BIOS-e820: [mem 0x00000000cffae000-0x00000000cffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Acer Aspire X3300/WMCP78M, BIOS P01-B1 04/02/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-D3FFF write-protect
  D4000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000220000000 aka 8704M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8a4c000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8a4c00097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0xcf02a000, 0xcf02afff] PGTABLE
BRK [0xcf02b000, 0xcf02bfff] PGTABLE
BRK [0xcf02c000, 0xcf02cfff] PGTABLE
BRK [0xcf02d000, 0xcf02dfff] PGTABLE
BRK [0xcf02e000, 0xcf02efff] PGTABLE
RAMDISK: [mem 0x32e3f000-0x35716fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB8E0 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000CFFA0100 00007C (v01 ACRSYS ACRPRDCT 20100402 MSFT 00000097)
ACPI: FACP 0x00000000CFFA0290 0000F4 (v04 040210 FACP1433 20100402 MSFT 00000097)
ACPI: DSDT 0x00000000CFFA05E0 008DED (v02 EUP78  P01-B1   00000002 INTL 20051117)
ACPI: FACS 0x00000000CFFAE000 000040
ACPI: FACS 0x00000000CFFAE000 000040
ACPI: APIC 0x00000000CFFA0390 000090 (v02 040210 APIC1433 20100402 MSFT 00000097)
ACPI: MCFG 0x00000000CFFA0420 00003C (v01 040210 OEMMCFG  20100402 MSFT 00000097)
ACPI: SLIC 0x00000000CFFA0460 000176 (v01 ACRSYS ACRPRDCT 20100402 MSFT 00000097)
ACPI: OEMB 0x00000000CFFAE040 000073 (v01 040210 OEMB1433 20100402 MSFT 00000097)
ACPI: SRAT 0x00000000CFFAA5E0 0000E8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: HPET 0x00000000CFFAA6D0 000038 (v01 040210 OEMHPET0 20100402 MSFT 00000097)
ACPI: INFO 0x00000000CFFAE0C0 000124 (v01 040210 AMDINFO  20100402 MSFT 00000097)
ACPI: NVHD 0x00000000CFFAE1F0 000284 (v01 040210 NVHDCP   20100402 MSFT 00000097)
ACPI: AWMI 0x00000000CFFAE480 00004E (v01 040210 OEMB1433 20100402 MSFT 00000097)
ACPI: SSDT 0x00000000CFFAA710 00088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x21fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x21fffffff] -> [mem 0x00000000-0x21fffffff]
NODE_DATA(0) allocated [mem 0x21ffd3000-0x21fffdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000021fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x00000000cff9ffff]
  node   0: [mem 0x0000000100000000-0x000000021fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
On node 0 totalpages: 2031420
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 13247 pages used for memmap
  DMA32 zone: 847776 pages, LIFO batch:31
  Normal zone: 18432 pages used for memmap
  Normal zone: 1179648 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 6 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
PM: Registered nosave memory: [mem 0xcffae000-0xcffeffff]
PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xff6fffff]
PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8a4e1fc00000 s107992 r8192 d31272 u262144
pcpu-alloc: s107992 r8192 d31272 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1999656
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-generic root=/dev/mapper/hawkeye--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x8a2e000000-0x8a2fffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 7803508K/8125680K available (9091K kernel code, 1667K rwdata, 3820K rodata, 2232K init, 2364K bss, 322172K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:524544 nr_irqs:472 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2800.074 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.14 BogoMIPS (lpj=11200296)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 36K
ftrace: allocating 34198 entries in 134 pages
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X4 630 Processor (family: 0x10, model: 0x5, stepping: 0x2)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (22400.59 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcffae000-0xcffeffff] (270336 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 14:42:35, date: 09/16/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [f0000000, fe0bffff]
node 0 link 0: mmio [a0000, bffff]
TOM2: 0000000220000000 aka 8704M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x220000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io  0x4f00-0x4fff]
pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io  0x4900-0x493f]
pci 0000:00:01.1: reg 0x20: [io  0x4d00-0x4d3f]
pci 0000:00:01.1: reg 0x24: [io  0x4e00-0x4e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
pci 0000:00:01.3: reg 0x10: [mem 0xfbf80000-0xfbffffff]
pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xfbf7f000-0xfbf7ffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xfbf7ec00-0xfbf7ecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
pci 0000:00:04.0: reg 0x10: [mem 0xfbf7d000-0xfbf7dfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
pci 0000:00:04.1: reg 0x10: [mem 0xfbf7e800-0xfbf7e8ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
pci 0000:00:07.0: reg 0x10: [mem 0xfbf78000-0xfbf7bfff]
pci 0000:00:07.0: PME# supported from D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
pci 0000:00:08.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0ad4] type 00 class 0x010601
pci 0000:00:09.0: reg 0x10: [io  0xb480-0xb487]
pci 0000:00:09.0: reg 0x14: [io  0xb400-0xb403]
pci 0000:00:09.0: reg 0x18: [io  0xb080-0xb087]
pci 0000:00:09.0: reg 0x1c: [io  0xb000-0xb003]
pci 0000:00:09.0: reg 0x20: [io  0xac00-0xac0f]
pci 0000:00:09.0: reg 0x24: [mem 0xfbf76000-0xfbf77fff]
pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
pci 0000:00:0a.0: reg 0x10: [mem 0xfbf7c000-0xfbf7cfff]
pci 0000:00:0a.0: reg 0x14: [io  0xa880-0xa887]
pci 0000:00:0a.0: reg 0x18: [mem 0xfbf7e400-0xfbf7e4ff]
pci 0000:00:0a.0: reg 0x1c: [mem 0xfbf7e000-0xfbf7e00f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [10de:077a] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:08.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:08.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:08.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:02:00.0: [10de:084b] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io  0xcc00-0xcc7f]
pci 0000:02:00.0: reg 0x30: [mem 0xfdde0000-0xfddfffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0b.0:   bridge window [mem 0xfc000000-0xfddfffff]
pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [197b:2363] type 00 class 0x010601
pci 0000:04:00.0: reg 0x24: [mem 0xfdefe000-0xfdefffff]
pci 0000:04:00.0: reg 0x30: [mem 0xfdee0000-0xfdeeffff pref]
pci 0000:04:00.0: PME# supported from D3hot
pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
pci 0000:04:00.1: reg 0x10: [io  0xdc00-0xdc07]
pci 0000:04:00.1: reg 0x14: [io  0xd880-0xd883]
pci 0000:04:00.1: reg 0x18: [io  0xd800-0xd807]
pci 0000:04:00.1: reg 0x1c: [io  0xd480-0xd483]
pci 0000:04:00.1: reg 0x20: [io  0xd400-0xd40f]
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:12.0: PCI bridge to [bus 04]
pci 0000:00:12.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:12.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:05:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:05:00.0: reg 0x10: [mem 0xfdfff800-0xfdffffff 64bit]
pci 0000:05:00.0: reg 0x18: [io  0xe800-0xe8ff]
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D2 D3hot D3cold
pci 0000:00:13.0: PCI bridge to [bus 05]
pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:13.0:   bridge window [mem 0xfdf00000-0xfdffffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
ACPI: Enabled 1 GPEs in block 00 to 1F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:02:00.0: vgaarb: setting as boot VGA device
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0800-0x080f] has been reserved
system 00:00: [io  0x4000-0x407f] has been reserved
system 00:00: [io  0x4080-0x40ff] has been reserved
system 00:00: [io  0x4400-0x447f] has been reserved
system 00:00: [io  0x4480-0x44ff] has been reserved
system 00:00: [io  0x4800-0x487f] has been reserved
system 00:00: [io  0x4880-0x48ff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:00: [mem 0x000de000-0x000dffff window] has been reserved
system 00:00: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:00: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:04: [io  0x0a00-0x0a0f] has been reserved
system 00:04: [io  0x0a10-0x0a1f] has been reserved
system 00:04: [io  0x0a20-0x0a2f] has been reserved
system 00:04: [io  0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:06: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:06: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:08.0: PCI bridge to [bus 01]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0b.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0b.0:   bridge window [mem 0xfc000000-0xfddfffff]
pci 0000:00:0b.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 03]
pci 0000:00:12.0: PCI bridge to [bus 04]
pci 0000:00:12.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:12.0:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci 0000:00:13.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:13.0:   bridge window [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfddfffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfdf00000-0xfdffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
pci 0000:00:08.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Enabling HT MSI Mapping
pci 0000:00:0a.0: Enabling HT MSI Mapping
pci 0000:00:0b.0: Enabling HT MSI Mapping
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:04:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:04:00.1: async suspend disabled to avoid multi-function power-on ordering issue
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41824K
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1505572954.992:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffae6241400000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xfbf7ec00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-33-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:04.1: EHCI Host Controller
ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:04.1: debug port 1
ehci-pci 0000:00:04.1: cache line size of 64 is not supported
ehci-pci 0000:00:04.1: irq 20, io mem 0xfbf7e800
ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-33-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:04.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:02.0: irq 23, io mem 0xfbf7f000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 4.10.0-33-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:02.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ohci-pci 0000:00:04.0: OHCI PCI host controller
ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:04.0: irq 21, io mem 0xfbf7d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.10.0-33-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:04.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x01000086
microcode: CPU1: patch_level=0x01000086
microcode: CPU2: patch_level=0x01000086
microcode: CPU3: patch_level=0x01000086
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5a57f0fc1ea28e22fa277a8a89a08780381b045d'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
  Magic number: 1:390:738
rtc_cmos 00:01: setting system clock to 2017-09-16 14:42:36 UTC (1505572956)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2232K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1132K
Freeing unused kernel memory: 276K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:14/LNXVIDEO:00/input/input4
pata_amd 0000:00:06.0: version 0.4.1
pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
ACPI: PCI Interrupt Link [LN2B] enabled at IRQ 16
scsi host0: pata_amd
[drm] Initialized
scsi host1: pata_amd
scsi host2: pata_jmicron
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ahci 0000:00:09.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh 
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
ata5: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76100 irq 24
ata6: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76180 irq 24
ata7: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76200 irq 24
ata8: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76280 irq 24
ata9: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76300 irq 24
ata10: SATA max UDMA/133 abar m8192@0xfbf76000 port 0xfbf76380 irq 24
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
scsi host9: pata_jmicron
ata3: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
ata4: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
scsi host10: ahci
scsi host11: ahci
ata11: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 18
ata12: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 18
firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata2: port disabled--ignoring
ACPI Warning: \_SB.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
ACPI: \_SB_.PCI0.IXVE.IGPU: failed to evaluate _DSM
ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
checking generic (f9000000 130000) vs hw (f0000000 8000000)
checking generic (f9000000 130000) vs hw (f8000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau 0000:02:00.0: NVIDIA MCP77/MCP78 (0aa580a2)
nouveau 0000:02:00.0: bios: version 62.77.36.00.03
nouveau 0000:02:00.0: fb: 256 MiB stolen system memory
tsc: Refined TSC clocksource calibration: 2799.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c3fb0b68, max_idle_ns: 440795224466 ns
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  0-11 PQ: 0 ANSI: 5
ata7.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata6.00: ATA-8: WDC WD5000AAKS-00UU3A0, 01.03B01, max UDMA/133
ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/133
ata6.00: configured for UDMA/133
ata8.00: ATA-7: WDC WD1600YS-01SHB1, 20.06C06, max UDMA/133
ata8.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
 sda: sda1
sd 3:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 3B01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] Attached SCSI disk
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:26:2d:2d:2a:65
forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
forcedeth 0000:00:0a.0 enp0s10: renamed from eth0
sd 5:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: Attached scsi generic sg2 type 0
scsi 6:0:0:0: Direct-Access     ATA      WDC WD1600YS-01S 6C06 PQ: 0 ANSI: 5
sd 5:0:0:0: [sdc] Attached SCSI disk
ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata11.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata12.00: ATA-8: WDC WD10EARS-00Y5B1, 80.00A80, max UDMA/133
ata12.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata11.00: configured for UDMA/133
ata12.00: configured for UDMA/133
firewire_core 0000:05:00.0: created device fw0: GUID 001d72ffbb5f59ff, S400
sd 6:0:0:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: [sdd] 321672960 512-byte logical blocks: (165 GB/153 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 6:0:0:0: [sdd] Attached SCSI disk
scsi 10:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 10:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 11:0:0:0: Direct-Access     ATA      WDC WD10EARS-00Y 0A80 PQ: 0 ANSI: 5
 sde: sde1 sde2 sde4
sd 10:0:0:0: [sde] Attached SCSI disk
sd 11:0:0:0: Attached scsi generic sg5 type 0
sd 11:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 11:0:0:0: [sdf] Write Protect is off
sd 11:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 11:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdf: sdf1 sdf2 sdf4
sd 11:0:0:0: [sdf] Attached SCSI disk
random: fast init done
md127: detected capacity change from 0 to 1998265778176
clocksource: Switched to clocksource tsc
random: crng init done
[TTM] Zone  kernel: Available graphics memory: 3957480 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:02:00.0: DRM: VRAM: 256 MiB
nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
nouveau 0000:02:00.0: DRM: TMDS table version 2.0
nouveau 0000:02:00.0: DRM: DCB version 4.0
nouveau 0000:02:00.0: DRM: DCB outp 00: 01000300 0000001e
nouveau 0000:02:00.0: DRM: DCB outp 01: 01011332 00020010
nouveau 0000:02:00.0: DRM: DCB conn 00: 00000100
nouveau 0000:02:00.0: DRM: DCB conn 01: 00001261
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:02:00.0: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau 0000:02:00.0: DRM: allocated 1024x768 fb: 0x50000, bo ffff8a4e0de22800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 0
raid6: sse2x1   gen()  3622 MB/s
raid6: sse2x1   xor()  3779 MB/s
raid6: sse2x2   gen()  6432 MB/s
raid6: sse2x2   xor()  6161 MB/s
raid6: sse2x4   gen()  7174 MB/s
raid6: sse2x4   xor()  3880 MB/s
raid6: using algorithm sse2x4 gen() 7174 MB/s
raid6: .... xor() 3880 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse: 10950.000 MB/sec
   generic_sse: 10362.000 MB/sec
xor: using function: prefetch64-sse (10950.000 MB/sec)
async_tx: api initialized (async)
Btrfs loaded, crc32c=crc32c-generic
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Syslog Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
it87: Found IT8720F chip at 0xa10, revision 8
it87: VID is disabled (pins used for GPIO)
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[524]: Received request to flush runtime journal from PID 1
i2c i2c-7: nForce2 SMBus adapter at 0x4d00
ACPI Warning: SystemIO range 0x0000000000004E00-0x0000000000004E3F conflicts with OpRegion 0x0000000000004E00-0x0000000000004E3F (\_SB.PCI0.SM00) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
snd_hda_intel 0000:00:07.0: Disabling MSI
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
Adding 8122364k swap on /dev/mapper/hawkeye--vg-swap_1.  Priority:-1 extents:1 across:8122364k FS
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md127): mounting ext3 file system using the ext4 subsystem
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input6
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:07.0/sound/card0/input7
input: HDA NVidia Line as /devices/pci0000:00/0000:00:07.0/sound/card0/input8
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:07.0/sound/card0/input9
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:07.0/sound/card0/input11
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input12
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1505572986.798:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1200 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1199 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1199 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1199 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1199 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1203 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=1198 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=1198 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=1198 comm="apparmor_parser"
audit: type=1400 audit(1505572986.798:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=1198 comm="apparmor_parser"
forcedeth 0000:00:0a.0 enp0s10: MSI enabled
cgroup: new mount options do not match the existing superblock, will be ignored
forcedeth 0000:00:0a.0 enp0s10: link down
forcedeth 0000:00:0a.0 enp0s10: link up

Return To cpu System Information