dmesg - Thinkpad_X230_batchtest
microcode: microcode updated early to revision 0x1c, date = 2015-02-26
Linux version 4.12.10-1-ARCH (builduser@tobias) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Wed Aug 30 12:18:42 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000cec30fff] usable
BIOS-e820: [mem 0x00000000cec31000-0x00000000dae9efff] reserved
BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
BIOS-e820: [mem 0x000000041e600000-0x000000041effffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 232578G/232578G, BIOS G2ET97WW (2.57 ) 10/25/2013
tsc: Fast TSC calibration using PIT
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB000000 mask FFF000000 uncachable
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask E00000000 write-back
8 base 400000000 mask FE0000000 write-back
9 base 41F000000 mask FFF000000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xcec31 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9447c00f0100]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9447c0097000] 97000 size 24576
BRK [0x3d6d5f000, 0x3d6d5ffff] PGTABLE
BRK [0x3d6d60000, 0x3d6d60fff] PGTABLE
BRK [0x3d6d61000, 0x3d6d61fff] PGTABLE
BRK [0x3d6d62000, 0x3d6d62fff] PGTABLE
BRK [0x3d6d63000, 0x3d6d63fff] PGTABLE
BRK [0x3d6d64000, 0x3d6d64fff] PGTABLE
BRK [0x3d6d65000, 0x3d6d65fff] PGTABLE
BRK [0x3d6d66000, 0x3d6d66fff] PGTABLE
BRK [0x3d6d67000, 0x3d6d67fff] PGTABLE
BRK [0x3d6d68000, 0x3d6d68fff] PGTABLE
BRK [0x3d6d69000, 0x3d6d69fff] PGTABLE
RAMDISK: [mem 0x36df3000-0x376f0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
ACPI: XSDT 0x00000000DAFFE170 0000BC (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: FACP 0x00000000DAFE6000 00010C (v05 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: DSDT 0x00000000DAFE8000 010E26 (v01 LENOVO TP-G2 00002570 INTL 20061109)
ACPI: FACS 0x00000000DAF5A000 000040
ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G2 00002570 PTL 00000001)
ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 0x00000000DAFF9000 0007A8 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 0x00000000DAFE4000 000038 (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: APIC 0x00000000DAFE3000 000098 (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: MCFG 0x00000000DAFE2000 00003C (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: ECDT 0x00000000DAFE1000 000052 (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: FPDT 0x00000000DAFE0000 000064 (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: ASF! 0x00000000DAFE7000 0000A5 (v32 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: UEFI 0x00000000DAFDF000 00003E (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: UEFI 0x00000000DAFDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: MSDM 0x00000000DAFDD000 000055 (v03 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: SSDT 0x00000000DAFDC000 000C79 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x00000000DAFDB000 000A83 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x00000000DAFDA000 0002A6 (v01 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: DBG2 0x00000000DAFD9000 0000E9 (v00 LENOVO TP-G2 00002570 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
NODE_DATA(0) allocated [mem 0x41e5f0000-0x41e5f4fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041e5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x0000000040003fff]
node 0: [mem 0x0000000040005000-0x00000000cec30fff]
node 0: [mem 0x0000000100000000-0x000000041e5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
On node 0 totalpages: 4116428
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13161 pages used for memmap
DMA32 zone: 842288 pages, LIFO batch:31
Normal zone: 51096 pages used for memmap
Normal zone: 3270144 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0xcec31000-0xdae9efff]
PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff944bde200000 s106328 r8192 d28840 u262144
pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4052086
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16117432K/16465712K available (6543K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 348280K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
ftrace: allocating 27931 entries in 110 pages
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2893.300 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5788.70 BogoMIPS (lpj=9644333)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170303
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K
smpboot: Max logical packages: 4
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (23166.60 BogoMIPS)
sched_clock: Marking stable (443333289, 0)->(446691130, -3357841)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:56:51, date: 09/12/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF944BCBCC1000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF944BCBE09C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF944BCBDA5200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI : EC: EC stopped
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC_.EC__: Used as first EC
ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PUBS] (on)
acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
acpi IBM0079:00: ACPI dock station (docks/bays count: 3)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:00: root bus resource [bus 00-3f]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf2520000-0xf252ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf2535000-0xf253500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x50b0-0x50b7]
pci 0000:00:16.3: reg 0x14: [mem 0xf253c000-0xf253cfff]
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf253b000-0xf253bfff]
pci 0000:00:19.0: reg 0x18: [io 0x5080-0x509f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf253a000-0xf253a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf2530000-0xf2533fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf2539000-0xf25393ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x50a8-0x50af]
pci 0000:00:1f.2: reg 0x14: [io 0x50bc-0x50bf]
pci 0000:00:1f.2: reg 0x18: [io 0x50a0-0x50a7]
pci 0000:00:1f.2: reg 0x1c: [io 0x50b8-0x50bb]
pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf2538000-0xf25387ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf2534000-0xf25340ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:02:00.0: [1180:e823] type 00 class 0x088001
pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:02:00.0: reg 0x10: [mem 0xf1d00000-0xf1d000ff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf1c00000-0xf1c01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xcec31000-0xcfffffff]
e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
system 00:01: [io 0x0400-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x15e0-0x15ef] has been reserved
system 00:01: [io 0x1600-0x167f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xf1d00000-0xf24fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf1c00000-0xf1cfffff]
pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf1400000-0xf1bfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xf1d00000-0xf24fffff]
pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf1c00000-0xf1cfffff]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf1400000-0xf1bfffff]
pci_bus 0000:04: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 9208K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcac31000-0xcec31000] (64MB) mapped at [ffff94488ac31000-ffff94488ec30fff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffbde0c2000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
0000:00:16.3: ttyS0 at I/O 0x50b0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
RAS: Correctable Errors collector initialized.
microcode: sig=0x306a9, pf=0x10, revision=0x1c
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 1:826:950
tty tty7: hash matches
memory memory3: hash matches
rtc_cmos 00:02: setting system clock to 2017-09-12 19:56:51 UTC (1505246211)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1324K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1636K
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
fbcon: inteldrmfb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2893.423 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b4fe3de5f, max_idle_ns: 440795305241 ns
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
SCSI subsystem initialized
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf253a000
libata version 3.00 loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf2539000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf2538000 port 0xf2538300 irq 26
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-4: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ATA-8: OCZ-AGILITY3, 2.22, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY3 2.22 PQ: 0 ANSI: 5
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
clocksource: Switched to clocksource tsc
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
ata2: SATA link down (SStatus 0 SControl 300)
usb 1-1.4: new full-speed USB device number 4 using ehci-pci
ata5: SATA link down (SStatus 0 SControl 300)
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1.6: new high-speed USB device number 5 using ehci-pci
random: fast init done
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Remote File Systems.
EXT4-fs (sda2): re-mounted. Opts: data=ordered
acpi_call: loading out-of-tree module taints kernel.
systemd-journald[210]: Received request to flush runtime journal from PID 1
Non-volatile memory driver v1.3
wmi: Mapper loaded
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
ACPI: Battery Slot [BAT0] (battery present)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (35 C)
ACPI: AC Adapter [AC] (off-line)
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS G2ET97WW (2.57 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad X230, model 232578G
thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Adding 4194300k swap on /dev/sda1. Priority:-1 extents:1 across:4194300k SSFS
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
PTP clock support registered
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20170303/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
input: PC Speaker as /devices/platform/pcspkr/input/input7
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
kvm: disabled by bios
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
iTCO_vendor_support: vendor-support=0
iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:bb:b6:69
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
e1000e 0000:00:19.0 enp0s25: renamed from eth0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
mousedev: PS/2 mouse device common for all mice
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_wdm 3-4:1.8: cdc-wdm1: USB WDM device
usbcore: registered new interface driver cdc_wdm
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_ncm
cdc_mbim 3-4:1.6: cdc-wdm2: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
usbcore: registered new interface driver cdc_mbim
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver btusb
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=2)
wlp3s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
random: crng init done
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:e4:cb:1f:9c:2a by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 492.167 msecs
PM: late suspend of devices complete after 17.888 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 59.425 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 1448.208 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
microcode: updated to revision 0x1c, date = 2015-02-26
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 56.848 msecs
PM: early resume of devices complete after 0.600 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
sd 0:0:0:0: [sda] Starting disk
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
usb 3-4: reset high-speed USB device number 2 using xhci_hcd
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 3-4: device firmware changed
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
PM: resume of devices complete after 904.953 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: docking
Restarting tasks ...
ACPI: \_SB_.PCI0.LPC_.EC__.BAT1: Unable to dock!
usb 3-4: USB disconnect, device number 2
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
done.
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
usb 3-4: new high-speed USB device number 3 using xhci_hcd
usb 3-4: USB disconnect, device number 3
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-4: new high-speed USB device number 4 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=2)
wlp3s0: associated
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:e4:cb:1f:9c:2a by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 438.208 msecs
PM: late suspend of devices complete after 16.603 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 59.880 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 40229.287 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
thinkpad_acpi: EC reports that Thermal Table has changed
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 56.838 msecs
PM: early resume of devices complete after 0.674 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 3-4: reset high-speed USB device number 4 using xhci_hcd
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 3-4: device firmware changed
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
PM: resume of devices complete after 874.775 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 3-4: USB disconnect, device number 4
done.
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
usb 2-1.8: new high-speed USB device number 3 using ehci-pci
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
usb 3-4: new high-speed USB device number 5 using xhci_hcd
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
usbhid 3-4:1.0: can't add hid device: -71
usbhid: probe of 3-4:1.0 failed with error -71
usb 3-4: USB disconnect, device number 5
usb 2-1.8.2: new full-speed USB device number 4 using ehci-pci
usb 2-1.8: USB disconnect, device number 3
usb 2-1.8.2: USB disconnect, device number 4
ACPI: \_SB_.GDCK: undocking
thinkpad_acpi: undocked from hotplug port replicator
thinkpad_acpi: EC reports that Thermal Table has changed
usb 3-4: new high-speed USB device number 6 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=3)
wlp3s0: associated
thinkpad_acpi: docked into hotplug port replicator
usb 2-1.8: new high-speed USB device number 5 using ehci-pci
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
usb 2-1.8.2: new full-speed USB device number 6 using ehci-pci
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.0003/input/input19
lenovo 0003:17EF:6047.0003: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.0004/input/input20
lenovo 0003:17EF:6047.0004: input,hiddev3,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
usb 2-1.8.4: new full-speed USB device number 7 using ehci-pci
thinkpad_acpi: EC reports that Thermal Table has changed
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
usbcore: registered new interface driver snd-usb-audio
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
usb 2-1.8.4: USB disconnect, device number 7
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:e4:cb:1f:9c:2a by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 252.670 msecs
PM: late suspend of devices complete after 15.210 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 56.556 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 28.260 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 60.181 msecs
PM: early resume of devices complete after 0.616 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 2-1.8: reset high-speed USB device number 5 using ehci-pci
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
usb 3-4: reset high-speed USB device number 6 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 3-4: device firmware changed
usb 2-1.8.2: reset full-speed USB device number 6 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
PM: resume of devices complete after 878.972 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 3-4: USB disconnect, device number 6
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
done.
Bluetooth: hci0: BCM: chip id 63
usb 3-4: new high-speed USB device number 7 using xhci_hcd
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
usbhid 3-4:1.0: can't add hid device: -71
usbhid: probe of 3-4:1.0 failed with error -71
usb 3-4: USB disconnect, device number 7
usb 3-4: new high-speed USB device number 8 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
usb 2-1.8: clear tt 2 (0060) error -71
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
ACPI: \_SB_.GDCK: undocking
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot disable (err = -71)
hub 2-1.8:1.0: hub_ext_port_status failed (err = -71)
thinkpad_acpi: undocked from hotplug port replicator
usb 2-1.8: USB disconnect, device number 5
usb 2-1.8.2: USB disconnect, device number 6
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=3)
wlp3s0: associated
thinkpad_acpi: EC reports that Thermal Table has changed
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
ACPI: \_SB_.GDCK: docking
ACPI: \_SB_.GDCK: Unable to dock!
usb 2-1.8: new high-speed USB device number 8 using ehci-pci
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
usb 2-1.8.2: new full-speed USB device number 9 using ehci-pci
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.0005/input/input21
lenovo 0003:17EF:6047.0005: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.0006/input/input22
lenovo 0003:17EF:6047.0006: input,hiddev3,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
thinkpad_acpi: EC reports that Thermal Table has changed
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
e1000e: enp0s25 NIC Link is Down
usb 2-1.8: clear tt 2 (0090) error -71
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
ACPI: \_SB_.GDCK: undocking
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot disable (err = -71)
hub 2-1.8:1.0: hub_ext_port_status failed (err = -71)
thinkpad_acpi: undocked from hotplug port replicator
usb 2-1.8: USB disconnect, device number 8
usb 2-1.8.2: USB disconnect, device number 9
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: docked into hotplug port replicator
e1000e: enp0s25 NIC Link is Down
usb 2-1.8: new high-speed USB device number 10 using ehci-pci
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
usb 2-1.8.2: new full-speed USB device number 11 using ehci-pci
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.0007/input/input23
lenovo 0003:17EF:6047.0007: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.0008/input/input24
lenovo 0003:17EF:6047.0008: input,hiddev3,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
thinkpad_acpi: EC reports that Thermal Table has changed
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
usb 2-1.8.4: new full-speed USB device number 12 using ehci-pci
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
e1000e: enp0s25 NIC Link is Down
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
e1000e: enp0s25 NIC Link is Down
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
e1000e: enp0s25 NIC Link is Down
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
e1000e: enp0s25 NIC Link is Down
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:e4:cb:1f:9c:2a by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 250.177 msecs
PM: late suspend of devices complete after 14.200 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 56.644 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 1512.024 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 56.810 msecs
PM: early resume of devices complete after 0.570 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : button: The lid device is not compliant to SW_LID.
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 2-1.8: reset high-speed USB device number 10 using ehci-pci
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
usb 3-4: reset high-speed USB device number 8 using xhci_hcd
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 3-4: device firmware changed
usb 2-1.8.2: reset full-speed USB device number 11 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
usb 2-1.8.4: reset full-speed USB device number 12 using ehci-pci
PM: resume of devices complete after 1866.797 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 3-4: USB disconnect, device number 8
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
done.
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
usb 3-4: new high-speed USB device number 9 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=3)
wlp3s0: associated
atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e059 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e059 ' to make it known.
e1000e: enp0s25 NIC Link is Down
usb 2-1.8: clear tt 2 (00b0) error -71
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8: USB disconnect, device number 10
usb 2-1.8.2: USB disconnect, device number 11
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8.4: cannot submit urb (err = -19)
ACPI: \_SB_.GDCK: undocking
thinkpad_acpi: undocked from hotplug port replicator
usb 2-1.8.4: cannot submit urb 0, error -19: no device
usb 2-1.8.4: USB disconnect, device number 12
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: docked into hotplug port replicator
usb 2-1.8: new high-speed USB device number 13 using ehci-pci
e1000e: enp0s25 NIC Link is Down
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
usb 2-1.8.2: new full-speed USB device number 14 using ehci-pci
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.0009/input/input25
lenovo 0003:17EF:6047.0009: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.000A/input/input26
lenovo 0003:17EF:6047.000A: input,hiddev3,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
usb 2-1.8.4: new full-speed USB device number 15 using ehci-pci
thinkpad_acpi: EC reports that Thermal Table has changed
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
usb 2-1.8.4: 1:1: cannot get freq at ep 0x1
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=3)
wlp3s0: associated
usb 2-1.8.4: USB disconnect, device number 15
atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e059 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e059 ' to make it known.
e1000e: enp0s25 NIC Link is Down
usb 2-1.8: clear tt 2 (00e0) error -71
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
ACPI: \_SB_.GDCK: undocking
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8: USB disconnect, device number 13
usb 2-1.8.2: USB disconnect, device number 14
usb 2-1.8-port2: cannot disable (err = -71)
thinkpad_acpi: undocked from hotplug port replicator
thinkpad_acpi: EC reports that Thermal Table has changed
e1000e: enp0s25 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:e4:cb:1f:9c:2a by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 452.965 msecs
PM: late suspend of devices complete after 14.007 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 56.590 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 7225.007 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 56.852 msecs
PM: early resume of devices complete after 0.412 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
usb 3-4: reset high-speed USB device number 9 using xhci_hcd
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 3-4: device firmware changed
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
PM: resume of devices complete after 844.506 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 3-4: USB disconnect, device number 9
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
done.
Bluetooth: hci0: BCM: chip id 63
usb 3-4: new high-speed USB device number 10 using xhci_hcd
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
usbhid 3-4:1.0: can't add hid device: -71
usbhid: probe of 3-4:1.0 failed with error -71
usb 3-4: USB disconnect, device number 10
usb 3-4: new high-speed USB device number 11 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
wlp3s0: authenticate with a0:39:f7:45:6d:f5
wlp3s0: send auth to a0:39:f7:45:6d:f5 (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:39:f7:45:6d:f5 (try 1/3)
wlp3s0: RX AssocResp from a0:39:f7:45:6d:f5 (capab=0x431 status=0 aid=1)
wlp3s0: associated
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:39:f7:45:6d:f5 by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 462.559 msecs
PM: late suspend of devices complete after 14.390 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 59.807 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 14953.379 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 56.858 msecs
PM: early resume of devices complete after 0.739 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
sd 0:0:0:0: [sda] Starting disk
rtc_cmos 00:02: System wakeup disabled by ACPI
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 3-4: reset high-speed USB device number 11 using xhci_hcd
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 3-4: device firmware changed
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
PM: resume of devices complete after 871.012 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 3-4: USB disconnect, device number 11
done.
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
usb 3-4: new high-speed USB device number 12 using xhci_hcd
usbhid 3-4:1.0: can't add hid device: -71
usbhid: probe of 3-4:1.0 failed with error -71
usb 3-4: USB disconnect, device number 12
usb 3-4: new high-speed USB device number 13 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=2)
wlp3s0: associated
ACPI: \_SB_.GDCK: docking
ACPI: \_SB_.GDCK: Unable to dock!
usb 2-1.8: new high-speed USB device number 16 using ehci-pci
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
usb 2-1.8.2: new full-speed USB device number 17 using ehci-pci
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.000B/input/input27
lenovo 0003:17EF:6047.000B: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.000C/input/input28
lenovo 0003:17EF:6047.000C: input,hiddev3,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
thinkpad_acpi: EC reports that Thermal Table has changed
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
lenovo 0003:17EF:6047.000C: Sensitivity setting failed: -110
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
wlp3s0: deauthenticating from a0:e4:cb:1f:9c:2a by local choice (Reason: 3=DEAUTH_LEAVING)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 456.700 msecs
PM: late suspend of devices complete after 15.342 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 59.871 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: event blocked
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Suspended for 1613.093 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
cache: parent cpu2 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x19
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
microcode: sig=0x306a9, pf=0x10, revision=0x1c
CPU3 is up
ACPI: Waking up from system sleep state S3
sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 56.829 msecs
PM: early resume of devices complete after 0.712 msecs
e1000e 0000:00:19.0: System wakeup disabled by ACPI
ACPI : EC: event unblocked
rtc_cmos 00:02: System wakeup disabled by ACPI
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 2-1.8: reset high-speed USB device number 16 using ehci-pci
usb 1-1.4: reset full-speed USB device number 4 using ehci-pci
usb 3-4: reset high-speed USB device number 13 using xhci_hcd
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: configured for UDMA/133
usb 1-1.6: reset high-speed USB device number 5 using ehci-pci
usb 3-4: device firmware changed
usb 2-1.8.2: reset full-speed USB device number 17 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
PM: resume of devices complete after 867.919 msecs
usb 1-1.4:1.0: rebind failed: -517
usb 1-1.4:1.1: rebind failed: -517
PM: Finishing wakeup.
OOM killer enabled.
Restarting tasks ...
usb 3-4: USB disconnect, device number 13
cdc_mbim 3-4:1.6 wwp0s20u4i6: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM
done.
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e6.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e6.hcd not found
usb 3-4: new high-speed USB device number 14 using xhci_hcd
usbhid 3-4:1.0: can't add hid device: -71
usbhid: probe of 3-4:1.0 failed with error -71
usb 3-4: USB disconnect, device number 14
usb 3-4: new high-speed USB device number 15 using xhci_hcd
cdc_acm 3-4:1.1: ttyACM0: USB ACM device
cdc_acm 3-4:1.3: ttyACM1: USB ACM device
cdc_wdm 3-4:1.5: cdc-wdm0: USB WDM device
cdc_mbim 3-4:1.6: cdc-wdm1: USB WDM device
cdc_mbim 3-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 3a:ac:0e:f1:f9:16
cdc_wdm 3-4:1.8: cdc-wdm2: USB WDM device
cdc_acm 3-4:1.9: ttyACM2: USB ACM device
cdc_mbim 3-4:1.6 wwp0s20u4i6: renamed from wwan0
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=3)
wlp3s0: associated
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
atkbd serio0: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e059 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e059 ' to make it known.
e1000e: enp0s25 NIC Link is Down
usb 2-1.8: clear tt 2 (0110) error -71
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
ACPI: \_SB_.GDCK: undocking
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: cannot reset (err = -71)
usb 2-1.8-port2: Cannot enable. Maybe the USB cable is bad?
usb 2-1.8-port2: cannot disable (err = -71)
usb 2-1.8-port2: cannot disable (err = -71)
hub 2-1.8:1.0: hub_ext_port_status failed (err = -71)
thinkpad_acpi: undocked from hotplug port replicator
usb 2-1.8: USB disconnect, device number 16
usb 2-1.8.2: USB disconnect, device number 17
thinkpad_acpi: EC reports that Thermal Table has changed
thinkpad_acpi: docked into hotplug port replicator
usb 2-1.8: new high-speed USB device number 18 using ehci-pci
hub 2-1.8:1.0: USB hub found
hub 2-1.8:1.0: 6 ports detected
usb 2-1.8.2: new full-speed USB device number 19 using ehci-pci
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.0/0003:17EF:6047.000D/input/input29
lenovo 0003:17EF:6047.000D: input,hidraw0: USB HID v1.00 Keyboard [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input0
input: Lenovo ThinkPad Compact USB Keyboard with TrackPoint as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.2/2-1.8.2:1.1/0003:17EF:6047.000E/input/input30
lenovo 0003:17EF:6047.000E: input,hiddev3,hidraw1: USB HID v1.00 Mouse [Lenovo ThinkPad Compact USB Keyboard with TrackPoint] on usb-0000:00:1d.0-1.8.2/input1
thinkpad_acpi: EC reports that Thermal Table has changed
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
e1000e: enp0s25 NIC Link is Up 100 Mbps Half Duplex, Flow Control: Rx/Tx
e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 2/3)
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 3/3)
wlp3s0: association with a0:e4:cb:1f:9c:2a timed out
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 2/3)
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 3/3)
wlp3s0: authentication with a0:e4:cb:1f:9c:2a timed out
iwlwifi 0000:03:00.0: fail to flush all tx fifo queues Q 0
iwlwifi 0000:03:00.0: Queue 0 is active on fifo 3 and stuck for 0 ms. SW [21, 22] HW [21, 22] FH TRB=0x080300015
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 2/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from a0:e4:cb:1f:9c:2a
iwlwifi 0000:03:00.0: fail to flush all tx fifo queues Q 0
iwlwifi 0000:03:00.0: Queue 0 is active on fifo 3 and stuck for 0 ms. SW [23, 24] HW [23, 24] FH TRB=0x080300017
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 2/3)
wlp3s0: authenticated
wlp3s0: waiting for beacon from a0:e4:cb:1f:9c:2a
wlp3s0: authenticate with a0:e4:cb:1f:9c:2a
wlp3s0: send auth to a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: authenticated
wlp3s0: associate with a0:e4:cb:1f:9c:2a (try 1/3)
wlp3s0: RX AssocResp from a0:e4:cb:1f:9c:2a (capab=0x411 status=0 aid=3)
wlp3s0: associated