dmesg - e-ams-ws-d-testing-iozone-20170905-1720
microcode: microcode updated early to revision 0xba, date = 2017-04-09
Linux version 4.10.0-33-generic (buildd@lgw01-52) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #37-Ubuntu SMP Fri Aug 11 10:55:28 UTC 2017 (Ubuntu 4.10.0-33.37-generic 4.10.17)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f749fff] usable
BIOS-e820: [mem 0x000000007f74a000-0x000000007f74afff] ACPI NVS
BIOS-e820: [mem 0x000000007f74b000-0x000000007f74bfff] reserved
BIOS-e820: [mem 0x000000007f74c000-0x000000008a2e8fff] usable
BIOS-e820: [mem 0x000000008a2e9000-0x000000008a5ebfff] reserved
BIOS-e820: [mem 0x000000008a5ec000-0x000000008a753fff] usable
BIOS-e820: [mem 0x000000008a754000-0x000000008adf9fff] ACPI NVS
BIOS-e820: [mem 0x000000008adfa000-0x000000008b3fefff] reserved
BIOS-e820: [mem 0x000000008b3ff000-0x000000008b3fffff] usable
BIOS-e820: [mem 0x000000008b400000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046dffffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: MSI MS-7982/H170M PRO-VDH (MS-7982), BIOS 2.C0 12/30/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46e000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008B800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8b400 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcbe0-0x000fcbef] mapped at [ffff9c0b800fcbe0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9c0b80096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x1d822a000, 0x1d822afff] PGTABLE
BRK [0x1d822b000, 0x1d822bfff] PGTABLE
BRK [0x1d822c000, 0x1d822cfff] PGTABLE
BRK [0x1d822d000, 0x1d822dfff] PGTABLE
BRK [0x1d822e000, 0x1d822efff] PGTABLE
BRK [0x1d822f000, 0x1d822ffff] PGTABLE
BRK [0x1d8230000, 0x1d8230fff] PGTABLE
BRK [0x1d8231000, 0x1d8231fff] PGTABLE
BRK [0x1d8232000, 0x1d8232fff] PGTABLE
BRK [0x1d8233000, 0x1d8233fff] PGTABLE
BRK [0x1d8234000, 0x1d8234fff] PGTABLE
BRK [0x1d8235000, 0x1d8235fff] PGTABLE
RAMDISK: [mem 0x32ba7000-0x355cafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008AA540A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000008AA7AE10 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000008AA541F0 026C1B (v02 ALASKA A M I 01072009 INTL 20160422)
ACPI: FACS 0x000000008ADF9C40 000040
ACPI: APIC 0x000000008AA7AF28 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000008AA7AFB0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000008AA7AFF8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x000000008AA7B038 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
ACPI: FIDT 0x000000008AA7B3F8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x000000008AA7B498 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
ACPI: SSDT 0x000000008AA7E5F8 00255F (v02 PegSsd PegSsdt 00001000 INTL 20160422)
ACPI: HPET 0x000000008AA80B58 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
ACPI: SSDT 0x000000008AA80B90 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
ACPI: SSDT 0x000000008AA81978 000A2B (v02 INTEL xh_rvp08 00000000 INTL 20160422)
ACPI: UEFI 0x000000008AA823A8 000042 (v01 INTEL EDK2 00000002 01000013)
ACPI: SSDT 0x000000008AA823F0 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
ACPI: LPIT 0x000000008AA832D0 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: WSMT 0x000000008AA83368 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008AA83390 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
ACPI: SSDT 0x000000008AA83630 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
ACPI: DBGP 0x000000008AA86638 000034 (v01 INTEL 00000002 MSFT 0000005F)
ACPI: DBG2 0x000000008AA86670 000054 (v00 INTEL 00000002 MSFT 0000005F)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046dffffff]
NODE_DATA(0) allocated [mem 0x46dfd5000-0x46dffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046dffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x000000007f749fff]
node 0: [mem 0x000000007f74c000-0x000000008a2e8fff]
node 0: [mem 0x000000008a5ec000-0x000000008a753fff]
node 0: [mem 0x000000008b3ff000-0x000000008b3fffff]
node 0: [mem 0x0000000100000000-0x000000046dffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046dffffff]
On node 0 totalpages: 4162539
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 8786 pages used for memmap
DMA32 zone: 562256 pages, LIFO batch:31
Normal zone: 56192 pages used for memmap
Normal zone: 3596288 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7f74a000-0x7f74afff]
PM: Registered nosave memory: [mem 0x7f74b000-0x7f74bfff]
PM: Registered nosave memory: [mem 0x8a2e9000-0x8a5ebfff]
PM: Registered nosave memory: [mem 0x8a754000-0x8adf9fff]
PM: Registered nosave memory: [mem 0x8adfa000-0x8b3fefff]
PM: Registered nosave memory: [mem 0x8b400000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9c0fedc00000 s107992 r8192 d31272 u524288
pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4097476
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16257316K/16650156K available (9091K kernel code, 1667K rwdata, 3820K rodata, 2232K init, 2364K bss, 392840K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 2700.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.00 BogoMIPS (lpj=10848000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 36K
ftrace: allocating 34198 entries in 134 pages
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6400 CPU @ 2.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (21696.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7f74a000-0x7f74afff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8a754000-0x8adf9fff] (6971392 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 7:09:37, date: 08/30/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 36 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB1CB000 000630 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB209C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB20C000 000115 (v02 PmRef Cpu0Hwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB20D200 0001A4 (v02 PmRef HwpLvt 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB1C9000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB20D000 000197 (v02 PmRef ApHwp 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9C0FDB20C600 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf12f000-0xdf12ffff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf12e000-0xdf12efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf12d000-0xdf12dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf12c000-0xdf12c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf12b000-0xdf12b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a144] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x18: [mem 0xdf004000-0xdf004fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xdf000000-0xdf003fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f74a000-0x7fffffff]
e820: reserve RAM buffer [mem 0x8a2e9000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8a754000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b400000-0x8bffffff]
e820: reserve RAM buffer [mem 0x46e000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a0f] has been reserved
system 00:00: [io 0x0a10-0x0a1f] has been reserved
system 00:00: [io 0x0a20-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1800-0x18fe] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0a: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0a: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0a: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0a: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0a: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [io 0xff00-0xfffe] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:0c: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:0c: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 43152K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x862e9000-0x8a2e9000] (64MB) mapped at [ffff9c0c062e9000-ffff9c0c0a2e8fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2717868ea45, max_idle_ns: 440795316085 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1504076977.808:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffb814c2000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-33-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-33-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x506e3, pf=0x2, revision=0xba
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5a57f0fc1ea28e22fa277a8a89a08780381b045d'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 13:623:168
acpi device:31: hash matches
rtc_cmos 00:07: setting system clock to 2017-08-30 07:09:38 UTC (1504076978)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2232K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1132K
Freeing unused kernel memory: 276K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ahci 0000:00:17.0: version 3.0
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[drm] Initialized
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
r8169 0000:01:00.0 eth0: RTL8168h/8111h at 0xffffb814c18f1000, d8:cb:8a:c3:96:23, XID 14100800 IRQ 122
r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:01:00.0 enp1s0: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b100 irq 121
ata2: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b180 irq 121
ata3: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b200 irq 121
ata4: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b280 irq 121
ata5: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b300 irq 121
ata6: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b380 irq 121
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
usb 1-9: new low-speed USB device number 2 using xhci_hcd
[drm] failed to retrieve link info, disabling eDP
[drm] GuC firmware load skipped
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
usb 1-9: New USB device found, idVendor=0458, idProduct=0186
usb 1-9: New USB device strings: Mfr=4, Product=40, SerialNumber=0
usb 1-9: Product: Wired Mouse
usb 1-9: Manufacturer: KYE SYSTEMS CORP.
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: ATA-7: SAMSUNG HD082GJ, JE100-19, max UDMA7
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD082GJ 0-19 PQ: 0 ANSI: 5
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: ATA-8: KINGSTON SHFS37A240G, 603ABBF0, max UDMA/133
ata4.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
random: fast init done
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA KINGSTON SHFS37A BBF0 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 >
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-10: new low-speed USB device number 3 using xhci_hcd
usb 1-10: New USB device found, idVendor=258a, idProduct=0001
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-10: Product: USB KEYBOARD
usb 1-10: Manufacturer: SINO WEALTH
usbhid 1-9:1.1: couldn't find an input interrupt endpoint
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:0458:0186.0001/input/input7
hid-generic 0003:0458:0186.0001: input,hidraw0: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:14.0-9/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:258A:0001.0002/input/input8
hid-generic 0003:258A:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-10/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:258A:0001.0003/input/input9
clocksource: Switched to clocksource tsc
hid-generic 0003:258A:0001.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:00:14.0-10/input1
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
[drm] RC6 on
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: cgmanager.service: Cannot add dependency job, ignoring: Unit cgmanager.service is masked.
systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
lp0: using parport0 (interrupt-driven).
EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
systemd-journald[296]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
random: crng init done
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
------------[ cut here ]------------
WARNING: CPU: 0 PID: 350 at /build/linux-nhaT8l/linux-4.10.0/drivers/gpu/drm/i915/intel_display.c:4807 skylake_pfit_enable+0xf1/0x100 [i915]
WARN_ON(crtc->config->scaler_state.scaler_id < 0)
Modules linked in: intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core input_leds snd_hwdep snd_pcm aesni_intel aes_x86_64 crypto_simd snd_seq_midi glue_helper snd_seq_midi_event cryptd snd_rawmidi intel_cstate intel_rapl_perf snd_seq snd_seq_device snd_timer snd serio_raw soundcore intel_pch_thermal mei_me mei shpchp hci_uart btbcm btqca btintel bluetooth mac_hid acpi_pad acpi_als intel_lpss_acpi kfifo_buf intel_lpss industrialio coretemp parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid mxm_wmi i915 i2c_algo_bit drm_kms_helper syscopyarea psmouse sysfillrect sysimgblt fb_sys_fops drm
r8169 ahci libahci mii wmi video pinctrl_sunrisepoint pinctrl_intel i2c_hid hid fjes
CPU: 0 PID: 350 Comm: plymouthd Not tainted 4.10.0-33-generic #37-Ubuntu
Hardware name: MSI MS-7982/H170M PRO-VDH (MS-7982), BIOS 2.C0 12/30/2016
Call Trace:
dump_stack+0x63/0x81
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5f/0x80
? fwtable_write32+0xa8/0x1d0 [i915]
skylake_pfit_enable+0xf1/0x100 [i915]
haswell_crtc_enable+0x2b7/0x7d0 [i915]
? vblank_disable_fn+0x4e/0x90 [drm]
intel_update_crtc+0x50/0xe0 [i915]
skl_update_crtcs+0x17d/0x200 [i915]
intel_atomic_commit_tail+0x2f5/0xfe0 [i915]
? __switch_to+0x23c/0x520
? __schedule+0x23b/0x6f0
intel_atomic_commit+0x3cb/0x4f0 [i915]
? drm_atomic_set_crtc_for_connector+0xbc/0xf0 [drm]
drm_atomic_commit+0x4b/0x50 [drm]
drm_atomic_helper_set_config+0x82/0xe0 [drm_kms_helper]
drm_mode_set_config_internal+0x65/0x110 [drm]
drm_mode_setcrtc+0x43d/0x530 [drm]
drm_ioctl+0x21b/0x4c0 [drm]
? drm_mode_getcrtc+0x140/0x140 [drm]
? new_sync_read+0xd2/0x120
do_vfs_ioctl+0xa3/0x610
? vfs_read+0x11b/0x130
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1e/0xad
RIP: 0033:0x7f6dbfa84587
RSP: 002b:00007ffc0adbd3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055ca04456b70 RCX: 00007f6dbfa84587
RDX: 00007ffc0adbd420 RSI: 00000000c06864a2 RDI: 0000000000000009
RBP: 00007f6dbfd44400 R08: 0000000000000000 R09: 000055ca043513a0
R10: 000055ca04350e20 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000001000 R15: 00007ffc0adbd450
---[ end trace 4d41de7b5eab35fa ]---
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in output_types (expected 0x00000400, found 0x00000080)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in pch_pfit.enabled (expected 1, found 0)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in pch_pfit.size (expected 0x07800438, found 0x00000000)
[drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 270000, found 148499)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 350 at /build/linux-nhaT8l/linux-4.10.0/drivers/gpu/drm/i915/intel_display.c:13644 intel_atomic_commit_tail+0xcf3/0xfe0 [i915]
pipe state doesn't match!
Modules linked in: intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm snd_hda_codec_hdmi irqbypass crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core input_leds snd_hwdep snd_pcm aesni_intel aes_x86_64 crypto_simd snd_seq_midi glue_helper snd_seq_midi_event cryptd snd_rawmidi intel_cstate intel_rapl_perf snd_seq snd_seq_device snd_timer snd serio_raw soundcore intel_pch_thermal mei_me mei shpchp hci_uart btbcm btqca btintel bluetooth mac_hid acpi_pad acpi_als intel_lpss_acpi kfifo_buf intel_lpss industrialio coretemp parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid mxm_wmi i915 i2c_algo_bit drm_kms_helper syscopyarea psmouse sysfillrect sysimgblt fb_sys_fops drm
r8169 ahci libahci mii wmi video pinctrl_sunrisepoint pinctrl_intel i2c_hid hid fjes
CPU: 0 PID: 350 Comm: plymouthd Tainted: G W 4.10.0-33-generic #37-Ubuntu
Hardware name: MSI MS-7982/H170M PRO-VDH (MS-7982), BIOS 2.C0 12/30/2016
Call Trace:
dump_stack+0x63/0x81
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5f/0x80
intel_atomic_commit_tail+0xcf3/0xfe0 [i915]
? __switch_to+0x23c/0x520
? wake_atomic_t_function+0x60/0x60
intel_atomic_commit+0x3cb/0x4f0 [i915]
? drm_atomic_set_crtc_for_connector+0xbc/0xf0 [drm]
drm_atomic_commit+0x4b/0x50 [drm]
drm_atomic_helper_set_config+0x82/0xe0 [drm_kms_helper]
drm_mode_set_config_internal+0x65/0x110 [drm]
drm_mode_setcrtc+0x43d/0x530 [drm]
drm_ioctl+0x21b/0x4c0 [drm]
? drm_mode_getcrtc+0x140/0x140 [drm]
? new_sync_read+0xd2/0x120
do_vfs_ioctl+0xa3/0x610
? vfs_read+0x11b/0x130
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1e/0xad
RIP: 0033:0x7f6dbfa84587
RSP: 002b:00007ffc0adbd3e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000055ca04456b70 RCX: 00007f6dbfa84587
RDX: 00007ffc0adbd420 RSI: 00000000c06864a2 RDI: 0000000000000009
RBP: 00007f6dbfd44400 R08: 0000000000000000 R09: 000055ca043513a0
R10: 000055ca04350e20 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000001000 R15: 00007ffc0adbd450
---[ end trace 4d41de7b5eab35fb ]---
Adding 15624188k swap on /dev/sdb3. Priority:-1 extents:1 across:15624188k SSFS
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1504076981.713:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=912 comm="apparmor_parser"
audit: type=1400 audit(1504076981.713:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=913 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2312/usr/lib/snapd/snap-confine" pid=917 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2312/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=917 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=916 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=916 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=916 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=916 comm="apparmor_parser"
audit: type=1400 audit(1504076981.717:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=914 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2711995313 Hz
vboxdrv: Successfully loaded version 5.1.22_Ubuntu (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Process accounting resumed
IPv6: ADDRCONF(NETDEV_UP): lxcbr0: link is not ready
kauditd_printk_skb: 50 callbacks suppressed
audit: type=1400 audit(1504076991.577:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/lxc-start" pid=2975 comm="apparmor_parser"
audit: type=1400 audit(1504076991.593:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default" pid=2981 comm="apparmor_parser"
audit: type=1400 audit(1504076991.593:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-cgns" pid=2981 comm="apparmor_parser"
audit: type=1400 audit(1504076991.593:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-mounting" pid=2981 comm="apparmor_parser"
audit: type=1400 audit(1504076991.593:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="lxc-container-default-with-nesting" pid=2981 comm="apparmor_parser"
audit: type=1400 audit(1504076992.777:66): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=3241 comm="apparmor_parser"
aufs 4.x-rcN-20170206
Bridge firewalling registered
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
aufs au_opts_verify:1585:dockerd[3056]: dirperm1 breaks the protection by the permission bits on the lower branch
VBoxPciLinuxLinuxUnload
systemd: 35 output lines suppressed due to ratelimiting
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2712013982 Hz
vboxdrv: Successfully loaded version 5.1.26 (interface 0x002a0000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
SUPR0GipMap: fGetGipCpu=0xb
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
kvm: enabling virtualization on CPU0 failed
kvm: enabling virtualization on CPU2 failed
kvm: enabling virtualization on CPU1 failed
kvm: enabling virtualization on CPU3 failed
kvm: enabling virtualization on CPU2 failed
kvm: enabling virtualization on CPU0 failed
kvm: enabling virtualization on CPU1 failed
kvm: enabling virtualization on CPU3 failed
perf: interrupt took too long (2525 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
perf: interrupt took too long (3176 > 3156), lowering kernel.perf_event_max_sample_rate to 62750
perf: interrupt took too long (3998 > 3970), lowering kernel.perf_event_max_sample_rate to 50000
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sda] Stopping disk
serial 00:04: disabled
parport_pc 00:01: disabled
PM: suspend of devices complete after 302.867 msecs
PM: late suspend of devices complete after 17.847 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.846 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
Broke affinity for irq 122
smpboot: CPU 1 is now offline
Broke affinity for irq 120
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 2 is now offline
Broke affinity for irq 5
Broke affinity for irq 9
Broke affinity for irq 120
Broke affinity for irq 121
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 75742.303 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
microcode: sig=0x506e3, pf=0x2, revision=0xa6
microcode: updated to revision 0xba, date = 2017-04-09
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 37.934 msecs
PM: early resume of devices complete after 60.291 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
parport_pc 00:01: activated
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
serial 00:04: activated
rtc_cmos 00:07: System wakeup disabled by ACPI
[drm] GuC firmware load skipped
r8169 0000:01:00.0 enp1s0: link down
PM: resume of devices complete after 179.002 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
ata1: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
[drm] RC6 on
r8169 0000:01:00.0 enp1s0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
perf: interrupt took too long (5012 > 4997), lowering kernel.perf_event_max_sample_rate to 39750
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
serial 00:04: disabled
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
parport_pc 00:01: disabled
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 298.509 msecs
PM: late suspend of devices complete after 18.104 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.855 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
Broke affinity for irq 122
smpboot: CPU 1 is now offline
Broke affinity for irq 120
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 5
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 120
Broke affinity for irq 121
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 76337.322 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 37.001 msecs
PM: early resume of devices complete after 60.285 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
parport_pc 00:01: activated
serial 00:04: activated
rtc_cmos 00:07: System wakeup disabled by ACPI
[drm] GuC firmware load skipped
r8169 0000:01:00.0 enp1s0: link down
PM: resume of devices complete after 174.900 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
[drm] RC6 on
video LNXVIDEO:00: Restoring backlight state
ata6: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
r8169 0000:01:00.0 enp1s0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sda2): Mounting V5 Filesystem
XFS (sda2): Starting recovery (logdev: internal)
XFS (sda2): Ending recovery (logdev: internal)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
serial 00:04: disabled
parport_pc 00:01: disabled
PM: suspend of devices complete after 296.243 msecs
PM: late suspend of devices complete after 22.436 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.873 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
Broke affinity for irq 122
smpboot: CPU 1 is now offline
Broke affinity for irq 120
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 5
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 120
Broke affinity for irq 121
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 216.881 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 38.483 msecs
PM: early resume of devices complete after 60.298 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
parport_pc 00:01: activated
serial 00:04: activated
rtc_cmos 00:07: System wakeup disabled by ACPI
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
[drm] GuC firmware load skipped
r8169 0000:01:00.0 enp1s0: link down
PM: resume of devices complete after 174.901 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
[drm] RC6 on
video LNXVIDEO:00: Restoring backlight state
ata2: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
r8169 0000:01:00.0 enp1s0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
serial 00:04: disabled
parport_pc 00:01: disabled
PM: suspend of devices complete after 301.786 msecs
PM: late suspend of devices complete after 21.058 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.935 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
Broke affinity for irq 122
smpboot: CPU 1 is now offline
Broke affinity for irq 120
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 5
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 120
Broke affinity for irq 121
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 247485.660 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 36.951 msecs
PM: early resume of devices complete after 60.287 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
parport_pc 00:01: activated
serial 00:04: activated
rtc_cmos 00:07: System wakeup disabled by ACPI
[drm] GuC firmware load skipped
r8169 0000:01:00.0 enp1s0: link down
PM: resume of devices complete after 176.696 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
[drm] RC6 on
video LNXVIDEO:00: Restoring backlight state
ata1: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
r8169 0000:01:00.0 enp1s0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
vboxdrv: 0000000000000000 VMMR0.r0
vboxdrv: 0000000000000000 VBoxDDR0.r0
vboxdrv: 0000000000000000 VBoxEhciR0.r0
audit: type=1400 audit(1504510852.683:67): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=12128 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
audit: type=1400 audit(1504510852.891:68): apparmor="DENIED" operation="sendmsg" profile="/usr/bin/evince" name="/run/systemd/journal/socket" pid=12128 comm="evince" requested_mask="w" denied_mask="w" fsuid=1000 ouid=0
mmap: Chrome_libJingl (18284): VmData 2155446272 exceed data ulimit 2147483647. Update limits or use boot option ignore_rlimit_data.
traps: Chrome_libJingl[18284] trap int3 ip:55feb4f7354e sp:7f5807c7d460 error:0
in chrome[55feb159a000+6ce2000]
traps: Chrome_libJingl[12478] trap int3 ip:55feb4f7354e sp:7f5807cfd460 error:0
in chrome[55feb159a000+6ce2000]
gnome-software[3494]: segfault at fffffffffffffff0 ip 00007f7b4e2e5327 sp 00007fff660389c8 error 5 in libappstream-glib.so.8.0.11[7f7b4e2c4000+4d000]
traps: chrome[14096] trap int3 ip:55feb57e0d54 sp:7ffca3b17190 error:0
in chrome[55feb159a000+6ce2000]
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 3:0:0:0: [sdb] Synchronizing SCSI cache
sd 3:0:0:0: [sdb] Stopping disk
serial 00:04: disabled
parport_pc 00:01: disabled
sd 2:0:0:0: [sda] Synchronizing SCSI cache
sd 2:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 304.147 msecs
PM: late suspend of devices complete after 20.404 msecs
r8169 0000:01:00.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 39.744 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 120
Broke affinity for irq 122
smpboot: CPU 1 is now offline
Broke affinity for irq 120
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 5
Broke affinity for irq 9
Broke affinity for irq 12
Broke affinity for irq 120
Broke affinity for irq 121
Broke affinity for irq 122
Broke affinity for irq 123
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Suspended for 22368.447 seconds
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x4
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x6
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 37.791 msecs
PM: early resume of devices complete after 60.311 msecs
r8169 0000:01:00.0: System wakeup disabled by ACPI
sd 2:0:0:0: [sda] Starting disk
sd 3:0:0:0: [sdb] Starting disk
parport_pc 00:01: activated
serial 00:04: activated
rtc_cmos 00:07: System wakeup disabled by ACPI
r8169 0000:01:00.0 enp1s0: link down
ata2: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT3._GTF] (Node ffff9c0fdd0fcb18), AE_NOT_FOUND (20160930/psparse-543)
ata4.00: configured for UDMA/133
[drm] GuC firmware load skipped
PM: resume of devices complete after 444.258 msecs
PM: Finishing wakeup.
Restarting tasks ...
[drm] RC6 on
done.
video LNXVIDEO:00: Restoring backlight state
r8169 0000:01:00.0 enp1s0: link up
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.PRT2._GTF] (Node ffff9c0fdd0fca00), AE_NOT_FOUND (20160930/psparse-543)
ata3.00: configured for UDMA/133
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
audit: type=1400 audit(1504628130.804:69): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2774/usr/lib/snapd/snap-confine" pid=29366 comm="apparmor_parser"
audit: type=1400 audit(1504628130.804:70): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/2774/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=29366 comm="apparmor_parser"
audit: type=1400 audit(1504628130.916:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=29368 comm="apparmor_parser"
audit: type=1400 audit(1504628131.000:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.bucklespring.buckle" pid=29375 comm="apparmor_parser"
audit: type=1400 audit(1504628131.016:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.keepassxc.keepassxc" pid=29382 comm="apparmor_parser"
audit: type=1400 audit(1504628131.036:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.termius-app.termius-app" pid=29389 comm="apparmor_parser"
audit: type=1400 audit(1504628131.928:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.bucklespring.buckle" pid=29445 comm="apparmor_parser"
audit: type=1400 audit(1504628132.116:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/2774/usr/lib/snapd/snap-confine" pid=29453 comm="apparmor_parser"
audit: type=1400 audit(1504628132.140:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/2774/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=29453 comm="apparmor_parser"
audit: type=1400 audit(1504628132.216:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.core.hook.configure" pid=29455 comm="apparmor_parser"