dmesg - CUDAMiniNbody

Return To CUDAMiniNbody System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.el6.x86_64 (mockbuild@c1bm.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Tue Mar 21 19:29:05 UTC 2017
Command line: ro root=/dev/mapper/vg_maracuja-lv_root rd_NO_LUKS rd_LVM_LV=vg_maracuja/lv_swap LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_maracuja/lv_root rd_NO_DM  KEYBOARDTYPE=pc KEYTABLE=br-abnt2 rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
 BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
 BIOS-e820: 00000000bf78e000 - 00000000bf7d0000 (ACPI NVS)
 BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved)
 BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 000000017c000000 (usable)
 BIOS-e820: 000000017c000000 - 0000000180000000 (reserved)
 BIOS-e820: 0000000180000000 - 00000001c0000000 (usable)
SMBIOS version 2.6 @ 0xFA1F0
SMBIOS 2.6 present.
DMI: Dell Inc. Studio XPS 8100/0T568R, BIOS A03 12/09/2009
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 7GB, range: 1GB, type UC
reg 1, base: 0GB, range: 8GB, type WB
reg 2, base: 3GB, range: 1GB, type UC
reg 3, base: 6080MB, range: 64MB, type UC
total RAM covered: 6080M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 128M 	num_reg: 5  	lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 2GB, type WB
reg 3, base: 6080MB, range: 64MB, type UC
reg 4, base: 6GB, range: 1GB, type WB
e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
e820 update range: 000000017c000000 - 0000000180000000 (usable) ==> (reserved)
last_pfn = 0xbf780 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000bf780000
 0000000000 - 00bf600000 page 2M
 00bf600000 - 00bf780000 page 4k
kernel direct mapping tables up to bf780000 @ 8000-d000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-00000001c0000000
 0100000000 - 01c0000000 page 2M
kernel direct mapping tables up to 1c0000000 @ b000-f000
RAMDISK: 36682000 - 37fefcd2
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f9ad0 00024 (v02 ACPIAM)
ACPI: XSDT 00000000bf780100 0006C (v01 DELL    FX09    20091209 MSFT 00000097)
ACPI: FACP 00000000bf780290 000F4 (v04 DELL   FX09     20091209 MSFT 00000097)
ACPI: DSDT 00000000bf780660 05B85 (v02  1AAAA 1AAAA000 00000000 INTL 20051117)
ACPI: FACS 00000000bf78e000 00040
ACPI: APIC 00000000bf780390 0008C (v02 DELL   FX09     20091209 MSFT 00000097)
ACPI: MCFG 00000000bf780420 0003C (v01 DELL   OEMMCFG  20091209 MSFT 00000097)
ACPI: SLIC 00000000bf780460 00176 (v01 DELL    FX09    20091209 MSFT 00000097)
ACPI: OSFR 00000000bf7805e0 00080 (v01 DELL   FX09     20091209 MSFT 00000097)
ACPI: OEMB 00000000bf78e040 00072 (v01 DELL   FX09     20091209 MSFT 00000097)
ACPI: HPET 00000000bf78a660 00038 (v01 DELL   OEMHPET  20091209 MSFT 00000097)
ACPI: ASF! 00000000bf78a6a0 00099 (v32 LEGEND I865PASF 00000001 INTL 20051117)
ACPI: SSDT 00000000bf78f800 00363 (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-00000001c0000000
Bootmem setup node 0 0000000000000000-00000001c0000000
  NODE_DATA [000000000000e000 - 0000000000041fff]
  bootmap [0000000000042000 -  0000000000079fff] pages 38
(8 early reservations) ==> bootmem [0000000000 - 01c0000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0002045964]    TEXT DATA BSS ==> [0001000000 - 0002045964]
  #3 [0036682000 - 0037fefcd2]          RAMDISK ==> [0036682000 - 0037fefcd2]
  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
  #5 [0002046000 - 0002046219]              BRK ==> [0002046000 - 0002046219]
  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
  #7 [000000b000 - 000000e000]          PGTABLE ==> [000000b000 - 000000e000]
found SMP MP-table at [ffff8800000ff780] ff780
 [ffffea0000000000-ffffea00061fffff] PMD -> [ffff880028600000-ffff88002d9fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x001c0000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x000bf780
    0: 0x00100000 -> 0x0017c000
    0: 0x00180000 -> 0x001c0000
On node 0 totalpages: 1554206
  DMA zone: 56 pages used for memmap
  DMA zone: 105 pages reserved
  DMA zone: 3837 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 765880 pages, LIFO batch:31
  Normal zone: 10752 pages used for memmap
  Normal zone: 759296 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000
PM: Registered nosave memory: 00000000bf78e000 - 00000000bf7d0000
PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000
PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000
PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000
PM: Registered nosave memory: 000000017c000000 - 0000000180000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u262144
pcpu-alloc: s96600 r8192 d22184 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1529013
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_maracuja-lv_root rd_NO_LUKS rd_LVM_LV=vg_maracuja/lv_swap LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=vg_maracuja/lv_root rd_NO_DM  KEYBOARDTYPE=pc KEYTABLE=br-abnt2 rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 6020540k/7340032k available (5467k kernel code, 1123208k absent, 196284k reserved, 6954k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:472
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2926.163 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.32 BogoMIPS (lpj=2926163)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21966 entries in 87 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3 CPU         530  @ 2.93GHz stepping 02
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3
Brought up 4 CPUs
Total of 4 processors activated (23409.30 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at bf78e000 (270336 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab  at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xf9ffe000-0xf9ffe00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xf9ffc000-0xf9ffc3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xf9ff6000-0xf9ff63ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xcc00-0xcc07]
pci 0000:00:1f.2: reg 14: [io  0xc880-0xc883]
pci 0000:00:1f.2: reg 18: [io  0xc800-0xc807]
pci 0000:00:1f.2: reg 1c: [io  0xc480-0xc483]
pci 0000:00:1f.2: reg 20: [io  0xc400-0xc40f]
pci 0000:00:1f.2: reg 24: [io  0xc080-0xc08f]
pci 0000:00:1f.3: reg 10: [mem 0xf9ff4000-0xf9ff40ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
pci 0000:00:1f.5: reg 10: [io  0xbc00-0xbc07]
pci 0000:00:1f.5: reg 14: [io  0xb880-0xb883]
pci 0000:00:1f.5: reg 18: [io  0xb800-0xb807]
pci 0000:00:1f.5: reg 1c: [io  0xb480-0xb483]
pci 0000:00:1f.5: reg 20: [io  0xb400-0xb40f]
pci 0000:00:1f.5: reg 24: [io  0xb080-0xb08f]
pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 24: [io  0xdc00-0xdc7f]
pci 0000:01:00.0: reg 30: [mem 0xfbd80000-0xfbdfffff pref]
pci 0000:01:00.1: reg 10: [mem 0xfbd7c000-0xfbd7ffff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbdfffff]
pci 0000:00:01.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: reg 10: [mem 0xfbeff800-0xfbefffff 64bit]
pci 0000:03:00.0: reg 18: [io  0xe800-0xe8ff]
pci 0000:03:00.0: supports D2
pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:04:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
hpet: hpet4 irq 26 for MSI
hpet: hpet5 irq 27 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfc000000-0xfcffffff]
pnp 00:01: [mem 0xfd000000-0xfdffffff]
pnp 00:01: [mem 0xfe000000-0xfebfffff]
pnp 00:01: [mem 0xfed14000-0xfed19fff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io  0x0000-0x000f]
pnp 00:02: [io  0x0081-0x0083]
pnp 00:02: [io  0x0087]
pnp 00:02: [io  0x0089-0x008b]
pnp 00:02: [io  0x008f]
pnp 00:02: [io  0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io  0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io  0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:06: [io  0x0a00-0x0a0f]
pnp 00:06: [io  0x0a10-0x0a1f]
pnp 00:06: [io  0x0a20-0x0a2f]
pnp 00:06: [io  0x0a30-0x0a3f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x0010-0x001f]
pnp 00:07: [io  0x0022-0x003f]
pnp 00:07: [io  0x0044-0x005f]
pnp 00:07: [io  0x0062-0x0063]
pnp 00:07: [io  0x0065-0x006f]
pnp 00:07: [io  0x0072-0x007f]
pnp 00:07: [io  0x0080]
pnp 00:07: [io  0x0084-0x0086]
pnp 00:07: [io  0x0088]
pnp 00:07: [io  0x008c-0x008e]
pnp 00:07: [io  0x0090-0x009f]
pnp 00:07: [io  0x00a2-0x00bf]
pnp 00:07: [io  0x00e0-0x00ef]
pnp 00:07: [io  0x04d0-0x04d1]
pnp 00:07: [io  0x0800-0x087f]
pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io  0x0500-0x057f]
pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
pnp 00:07: [mem 0xfed20000-0xfed3ffff]
pnp 00:07: [mem 0xfed40000-0xfed8ffff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [mem 0xfed00000-0xfed003ff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:09: [mem 0xffb00000-0xffbfffff]
pnp 00:09: [mem 0xfff00000-0xffffffff]
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0a: [mem 0xffc00000-0xffefffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [mem 0xfec00000-0xfec00fff]
pnp 00:0b: [mem 0xfee00000-0xfee00fff]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xe0000000-0xefffffff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x00000000-0x0009ffff]
pnp 00:0d: [mem 0x000c0000-0x000cffff]
pnp 00:0d: [mem 0x000e0000-0x000fffff]
pnp 00:0d: [mem 0x00100000-0xbfffffff]
pnp 00:0d: [mem 0xfed90000-0xffffffff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:06: [io  0x0a00-0x0a0f] has been reserved
system 00:06: [io  0x0a10-0x0a1f] has been reserved
system 00:06: [io  0x0a20-0x0a2f] has been reserved
system 00:06: [io  0x0a30-0x0a3f] has been reserved
system 00:07: [io  0x04d0-0x04d1] has been reserved
system 00:07: [io  0x0800-0x087f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02-02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 04-04] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbdfffff]
pci 0000:00:01.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04-04]
pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.5:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0106 -> 0107)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbdfffff]
pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:04: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:05: resource 8 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26039k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1504107752.518:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 11809
SELinux:  Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 1A01485A64DD991D
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000bf78e0c0 01238 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
ACPI: SSDT 00000000bf78f300 004F4 (v01  PmRef  P001Cst 00003001 INTL 20051117)
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf9ffc000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf9ff6000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-696.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2017-08-30 15:42:32 UTC (1504107752)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 656k freed
Freeing unused kernel memory: 1548k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:1f.2: version 2.13
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new low speed USB device number 3 using ehci_hcd
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1.1: New USB device found, idVendor=04ca, idProduct=0027
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: USB Multimedia Keyboard
usb 1-1.1: Manufacturer: Lite-On Technology Corp.
usb 1-1.1: configuration #1 chosen from 1 choice
input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input3
generic-usb 0003:04CA:0027.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:1a.0-1.1/input0
input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input4
generic-usb 0003:04CA:0027.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:1a.0-1.1/input1
usb 1-1.2: new low speed USB device number 4 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=0461, idProduct=4d65
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Optical Mouse
usb 1-1.2: configuration #1 chosen from 1 choice
Refined TSC clocksource calibration: 2925.981 MHz.
Switching to clocksource tsc
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
generic-usb 0003:0461:4D65.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.2/input0
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
usb 2-1.2: new high speed USB device number 3 using ehci_hcd
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B103, max UDMA/100
ata2.00: configured for UDMA/100
ata1.00: ATA-7: ST380215AS, 3.AAD, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
usb 2-1.2: New USB device found, idVendor=18e3, idProduct=9106
usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.2: Product: Mass Storage Device
usb 2-1.2: Manufacturer: Generic
usb 2-1.2: SerialNumber: 18E391066476
usb 2-1.2: configuration #1 chosen from 1 choice
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST380215AS       D    PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH50N    B103 PQ: 0 ANSI: 5
firewire_ohci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
firewire_ohci 0000:03:00.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:03:00.0, OHCI version 1.10
firewire_ohci: swap not done yet
firewire_ohci: swap not done yet
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dracut: Scanning devices sda2  for LVM logical volumes vg_maracuja/lv_swap vg_maracuja/lv_root 
dracut: inactive '/dev/vg_maracuja/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_maracuja/lv_home' [18.26 GiB] inherit
dracut: inactive '/dev/vg_maracuja/lv_swap' [5.78 GiB] inherit
firewire_core: created device fw0: GUID b8ac6f8000a33ca7, S400
firewire_ohci: swap not done yet
firewire_ohci: swap not done yet
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/mapper/vg_maracuja-lv_root
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
dracut: Loading SELinux policy
type=1404 audit(1504107755.148:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 309305 rules.
SELinux: 2048 avtab hash slots, 309305 rules.
SELinux:  9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
SELinux:  81 classes, 309305 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1504107756.113:3): policy loaded auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.102  Mon Jan 16 13:06:29 PST 2017
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
snd_hda_intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sound hdaudioC0D0: autoconfig for ALC887: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0:    mono: mono_out=0x0
sound hdaudioC0D0:    dig-out=0x1e/0x0
sound hdaudioC0D0:    inputs:
sound hdaudioC0D0:      Front Mic=0x19
sound hdaudioC0D0:      Rear Mic=0x18
sound hdaudioC0D0:      Line=0x1a
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using polling
input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
snd_hda_intel 0000:01:00.1: setting latency timer to 64
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:1: Attached scsi generic sg3 type 0
sd 4:0:0:2: Attached scsi generic sg4 type 0
sd 4:0:0:3: Attached scsi generic sg5 type 0
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
tg3.c:v3.137 (May 11, 2014)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 mdio bus: probed
tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address b8:ac:6f:a3:3c:a7
tg3 0000:04:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01)
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: Found a H57 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x20652, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-25-02
microcode: CPU1 sig=0x20652, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-25-02
microcode: CPU2 sig=0x20652, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-25-02
microcode: CPU3 sig=0x20652, pf=0x2, revision=0x9
platform microcode: firmware: requesting intel-ucode/06-25-02
Microcode Update Driver: v2.00 , Peter Oruba
microcode: CPU0 updated to revision 0xe, date = 2013-06-26 
microcode: CPU1 updated to revision 0xe, date = 2013-06-26 
microcode: CPU2 updated to revision 0xe, date = 2013-06-26 
microcode: CPU3 updated to revision 0xe, date = 2013-06-26 
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 6062076k swap on /dev/mapper/vg_maracuja-lv_swap.  Priority:-1 extents:1 across:6062076k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
type=1305 audit(1504107770.058:4): audit_pid=2309 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
802.1Q VLAN Support v1.8 Ben Greear 
All bugs added by David S. Miller 
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 31 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is down
tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
Bridge firewalling registered
device virbr0-nic entered promiscuous mode
virbr0: starting userspace STP failed, starting kernel STP
Ebtables v2.0 registered
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
lo: Disabled Privacy Extensions
SELinux: initialized (dev proc, type proc), uses genfs_contexts
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
nvidia 0000:01:00.0: irq 32 for MSI/MSI-X
nvidia 0000:01:00.0: irq 32 for MSI/MSI-X
fuse init (API version 7.14)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
snd_hda_intel 0000:01:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
usb 2-1.6: new high speed USB device number 4 using ehci_hcd
usb 2-1.6: New USB device found, idVendor=8564, idProduct=1000
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: Mass Storage Device
usb 2-1.6: Manufacturer: JetFlash
usb 2-1.6: SerialNumber: I8K2OXBV
usb 2-1.6: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 5:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg6 type 0
sd 5:0:0:0: [sdf] 15645120 512-byte logical blocks: (8.01 GB/7.45 GiB)
sd 5:0:0:0: [sdf] Write Protect is off
sd 5:0:0:0: [sdf] Mode Sense: 03 00 00 00
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sd 5:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
sd 5:0:0:0: [sdf] Assuming drive cache: write through
sd 5:0:0:0: [sdf] Attached SCSI removable disk
SELinux: initialized (dev sdf1, type vfat), uses genfs_contexts
nvidia 0000:01:00.0: irq 32 for MSI/MSI-X
nvidia 0000:01:00.0: irq 32 for MSI/MSI-X
nvidia 0000:01:00.0: irq 32 for MSI/MSI-X
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
gsettings[6593]: segfault at 20 ip 00007fb800c4e3a3 sp 00007fffb06ac9d8 error 6 in libgio-2.0.so.0.4300.0[7fb800b7d000+180000]
gsettings[6596]: segfault at 20 ip 00007fe797c273a3 sp 00007ffea82816d8 error 6 in libgio-2.0.so.0.4300.0[7fe797b56000+180000]
gsettings[6599]: segfault at 20 ip 00007fb3cbc563a3 sp 00007ffdb5cbe708 error 6 in libgio-2.0.so.0.4300.0[7fb3cbb85000+180000]
gsettings[6602]: segfault at 20 ip 00007f7b2376d3a3 sp 00007ffe88676568 error 6 in libgio-2.0.so.0.4300.0[7f7b2369c000+180000]
gsettings[6797]: segfault at 20 ip 00007fed62e573a3 sp 00007ffe5dbc35a8 error 6 in libgio-2.0.so.0.4300.0[7fed62d86000+180000]
gsettings[6801]: segfault at 20 ip 00007f5f62cec3a3 sp 00007ffe9e91f0d8 error 6 in libgio-2.0.so.0.4300.0[7f5f62c1b000+180000]
gsettings[6805]: segfault at 20 ip 00007f1e3da983a3 sp 00007ffedcc899f8 error 6 in libgio-2.0.so.0.4300.0[7f1e3d9c7000+180000]
gsettings[6808]: segfault at 20 ip 00007f672a4f03a3 sp 00007ffdb25ddb58 error 6 in libgio-2.0.so.0.4300.0[7f672a41f000+180000]
gsettings[6892]: segfault at 20 ip 00007f0443a1f3a3 sp 00007ffcc78f9b48 error 6 in libgio-2.0.so.0.4300.0[7f044394e000+180000]
gsettings[6896]: segfault at 20 ip 00007ff74a8c13a3 sp 00007ffd7bee8658 error 6 in libgio-2.0.so.0.4300.0[7ff74a7f0000+180000]
gsettings[6900]: segfault at 20 ip 00007fcd14e773a3 sp 00007ffd12158218 error 6 in libgio-2.0.so.0.4300.0[7fcd14da6000+180000]
gsettings[6903]: segfault at 20 ip 00007fd64305d3a3 sp 00007ffdf3d46eb8 error 6 in libgio-2.0.so.0.4300.0[7fd642f8c000+180000]
gsettings[7172]: segfault at 20 ip 00007efce49a43a3 sp 00007ffc669a4f78 error 6 in libgio-2.0.so.0.4300.0[7efce48d3000+180000]
gsettings[7844]: segfault at 20 ip 00007f20da1223a3 sp 00007ffeb964a0f8 error 6 in libgio-2.0.so.0.4300.0[7f20da051000+180000]
gsettings[7848]: segfault at 20 ip 00007f42f466a3a3 sp 00007ffd469f74e8 error 6 in libgio-2.0.so.0.4300.0[7f42f4599000+180000]
gsettings[7852]: segfault at 20 ip 00007f7d50f193a3 sp 00007ffd42eda668 error 6 in libgio-2.0.so.0.4300.0[7f7d50e48000+180000]
gsettings[7855]: segfault at 20 ip 00007f0b57eaa3a3 sp 00007ffc446e01a8 error 6 in libgio-2.0.so.0.4300.0[7f0b57dd9000+180000]
gsettings[7884]: segfault at 20 ip 00007f6f2fe173a3 sp 00007ffcf1e6d158 error 6 in libgio-2.0.so.0.4300.0[7f6f2fd46000+180000]
gsettings[7887]: segfault at 20 ip 00007f92d28043a3 sp 00007ffc23577b18 error 6 in libgio-2.0.so.0.4300.0[7f92d2733000+180000]
gsettings[7890]: segfault at 20 ip 00007f83b022d3a3 sp 00007ffe063685b8 error 6 in libgio-2.0.so.0.4300.0[7f83b015c000+180000]
gsettings[7893]: segfault at 20 ip 00007f17801993a3 sp 00007fffa3edf528 error 6 in libgio-2.0.so.0.4300.0[7f17800c8000+180000]
gsettings[7922]: segfault at 20 ip 00007f0745cc33a3 sp 00007fff6b76e078 error 6 in libgio-2.0.so.0.4300.0[7f0745bf2000+180000]
gsettings[7925]: segfault at 20 ip 00007fe5cfd5c3a3 sp 00007ffc5d72a978 error 6 in libgio-2.0.so.0.4300.0[7fe5cfc8b000+180000]
gsettings[7928]: segfault at 20 ip 00007ff23af023a3 sp 00007ffe474307f8 error 6 in libgio-2.0.so.0.4300.0[7ff23ae31000+180000]
gsettings[7931]: segfault at 20 ip 00007fe9d8c5c3a3 sp 00007fff5725bf48 error 6 in libgio-2.0.so.0.4300.0[7fe9d8b8b000+180000]
gsettings[7985]: segfault at 20 ip 00007fe7e709f3a3 sp 00007ffe1d7c3fe8 error 6 in libgio-2.0.so.0.4300.0[7fe7e6fce000+180000]
gsettings[7989]: segfault at 20 ip 00007f4850c163a3 sp 00007ffdb7f03608 error 6 in libgio-2.0.so.0.4300.0[7f4850b45000+180000]
gsettings[7993]: segfault at 20 ip 00007f5cfae443a3 sp 00007ffd4f6f3a98 error 6 in libgio-2.0.so.0.4300.0[7f5cfad73000+180000]
gsettings[7996]: segfault at 20 ip 00007f2524f4b3a3 sp 00007ffc350e6828 error 6 in libgio-2.0.so.0.4300.0[7f2524e7a000+180000]
gsettings[8036]: segfault at 20 ip 00007fb499fbc3a3 sp 00007fff96d43c98 error 6 in libgio-2.0.so.0.4300.0[7fb499eeb000+180000]
gsettings[8040]: segfault at 20 ip 00007fa201b773a3 sp 00007ffc038b4308 error 6 in libgio-2.0.so.0.4300.0[7fa201aa6000+180000]
gsettings[8044]: segfault at 20 ip 00007fbdca6b63a3 sp 00007ffdfd16fdc8 error 6 in libgio-2.0.so.0.4300.0[7fbdca5e5000+180000]
gsettings[8047]: segfault at 20 ip 00007f8d4947d3a3 sp 00007fff0f8ea068 error 6 in libgio-2.0.so.0.4300.0[7f8d493ac000+180000]
gsettings[8392]: segfault at 20 ip 00007f166bb063a3 sp 00007ffe3986df18 error 6 in libgio-2.0.so.0.4300.0[7f166ba35000+180000]
gsettings[8397]: segfault at 20 ip 00007f377f7303a3 sp 00007ffed9adc298 error 6 in libgio-2.0.so.0.4300.0[7f377f65f000+180000]
gsettings[8400]: segfault at 20 ip 00007f657614f3a3 sp 00007ffdf2e5c358 error 6 in libgio-2.0.so.0.4300.0[7f657607e000+180000]
gsettings[8403]: segfault at 20 ip 00007fe152fe23a3 sp 00007ffea22e18c8 error 6 in libgio-2.0.so.0.4300.0[7fe152f11000+180000]
gsettings[8652]: segfault at 20 ip 00007f530848d3a3 sp 00007ffe45b675f8 error 6 in libgio-2.0.so.0.4300.0[7f53083bc000+180000]
gsettings[8660]: segfault at 20 ip 00007f42366ed3a3 sp 00007fffe2bdafd8 error 6 in libgio-2.0.so.0.4300.0[7f423661c000+180000]
gsettings[8664]: segfault at 20 ip 00007fab373b53a3 sp 00007ffc36df98d8 error 6 in libgio-2.0.so.0.4300.0[7fab372e4000+180000]
gsettings[8667]: segfault at 20 ip 00007fbb11dc73a3 sp 00007ffef7ebba78 error 6 in libgio-2.0.so.0.4300.0[7fbb11cf6000+180000]
nvidia_uvm: Loaded the UVM driver, major device number 243

Return To CUDAMiniNbody System Information