dmesg - r3
microcode: microcode updated early to revision 0x428, date = 2014-05-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10.0-514.21.1.el7.x86_64 (builder@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-11) (GCC) ) #1 SMP Thu May 25 17:04:51 UTC 2017
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009afff] usable
BIOS-e820: [mem 0x000000000009b000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007de06fff] usable
BIOS-e820: [mem 0x000000007de07000-0x000000007de95fff] reserved
BIOS-e820: [mem 0x000000007de96000-0x000000007df9efff] ACPI data
BIOS-e820: [mem 0x000000007df9f000-0x000000007e1cefff] ACPI NVS
BIOS-e820: [mem 0x000000007e1cf000-0x000000007f354fff] reserved
BIOS-e820: [mem 0x000000007f355000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro X9DRD-7LN4F(-JBOD)/X9DRD-EF/X9DRD-7LN4F, BIOS 3.0a 12/05/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FE000000000 write-back
1 base 002000000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 128GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 131072M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128G num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 2GB, range: 2GB, type UC
reg 2, base: 128GB, range: 2GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7de07 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fdbc0-0x000fdbcf] mapped at [ffff8800000fdbc0]
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x01fa2000, 0x01fa2fff] PGTABLE
BRK [0x01fa3000, 0x01fa3fff] PGTABLE
BRK [0x01fa4000, 0x01fa4fff] PGTABLE
RAMDISK: [mem 0x35728000-0x36b8bfff]
ACPI: RSDP 00000000000f04a0 00024 (v02 SUPERM)
ACPI: XSDT 000000007decb090 0009C (v01 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: FACP 000000007ded5790 000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: DSDT 000000007decb1b8 0A5D6 (v02 SUPERM SMCI--MB 00000000 INTL 20091112)
ACPI: FACS 000000007e1c6080 00040
ACPI: APIC 000000007ded5888 00294 (v03 00000001 AMI 00010013)
ACPI: FPDT 000000007ded5b20 00044 (v01 00000001 AMI 00010013)
ACPI: SRAT 000000007ded5b68 00530 (v01 A M I AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 000000007ded6098 00030 (v01 A M I AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 000000007ded60c8 00038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005)
ACPI: PRAD 000000007ded6100 000BE (v02 PRADID PRADTID 00000001 MSFT 04000000)
ACPI: SPMI 000000007ded61c0 00040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 000000007ded6200 C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112)
ACPI: EINJ 000000007df9dce8 00130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 000000007df9de18 00230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 000000007df9e048 000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 000000007df9e0f0 00030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 000000007df9e120 00160 (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: MCFG 000000007df9e280 0003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
SRAT: PXM 1 -> APIC 0x38 -> Node 1
SRAT: PXM 1 -> APIC 0x39 -> Node 1
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
Initmem setup node 0 [mem 0x00000000-0x107fffffff]
NODE_DATA [mem 0x107ffd9000-0x107fffffff]
Initmem setup node 1 [mem 0x1080000000-0x207fffffff]
NODE_DATA [mem 0x207ffd6000-0x207fffcfff]
Reserving 168MB of memory at 672MB for crashkernel (System RAM: 131037MB)
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x207fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009afff]
node 0: [mem 0x00100000-0x7de06fff]
node 0: [mem 0x100000000-0x107fffffff]
node 1: [mem 0x1080000000-0x207fffffff]
On node 0 totalpages: 16768417
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 7993 pages used for memmap
DMA32 zone: 511495 pages, LIFO batch:31
Normal zone: 253952 pages used for memmap
Normal zone: 16252928 pages, LIFO batch:31
On node 1 totalpages: 16777216
Normal zone: 262144 pages used for memmap
Normal zone: 16777216 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x24] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x26] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x28] enabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x30] enabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x22] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x24] lapic_id[0x36] enabled)
ACPI: LAPIC (acpi_id[0x26] lapic_id[0x38] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x19] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x25] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x27] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x29] enabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x31] enabled)
ACPI: LAPIC (acpi_id[0x21] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x23] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x25] lapic_id[0x37] enabled)
ACPI: LAPIC (acpi_id[0x27] lapic_id[0x39] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x20] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x22] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x24] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x26] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x21] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x23] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x25] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x27] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48])
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 40 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7de07000-0x7de95fff]
PM: Registered nosave memory: [mem 0x7de96000-0x7df9efff]
PM: Registered nosave memory: [mem 0x7df9f000-0x7e1cefff]
PM: Registered nosave memory: [mem 0x7e1cf000-0x7f354fff]
PM: Registered nosave memory: [mem 0x7f355000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:5120 nr_cpumask_bits:40 nr_cpu_ids:40 nr_node_ids:2
PERCPU: Embedded 33 pages/cpu @ffff88103f800000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 20 21 22 23 24 25
pcpu-alloc: [0] 26 27 28 29 -- -- -- -- [1] 10 11 12 13 14 15 16 17
pcpu-alloc: [1] 18 19 30 31 32 33 34 35 [1] 36 37 38 39 -- -- -- --
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 33021459
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 5981664k/136314880k available (6768k kernel code, 2132348k absent, 2378256k reserved, 4445k data, 1680k init)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=40, Nodes=2
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=40.
NR_IRQS:327936 nr_irqs:1560 0
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2500.075 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.15 BogoMIPS (lpj=2500075)
pid_max: default: 40960 minimum: 320
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 27 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 25815 entries in 101 pages
smpboot: Max logical packages: 4
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: DRHD base: 0x000000dfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007de6c000 end: 0x0000007de78fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000dfffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 3 under DRHD base 0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base 0xdfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xdfffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2670 v2 @ 2.50GHz (fam: 06, model: 3e, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 OK
smpboot: Booting Node 1, Processors #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 OK
smpboot: Booting Node 0, Processors #20 #21 #22 #23 #24 #25 #26 #27 #28 #29 OK
smpboot: Booting Node 1, Processors #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 OK
Brought up 40 CPUs
smpboot: Total of 40 processors activated (200130.52 BogoMIPS)
node 0 initialised, 15465712 pages in 368ms
node 1 initialised, 15989941 pages in 382ms
devtmpfs: initialized
EVM: security.selinux
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7df9f000-0x7e1cefff] (2293760 bytes)
PM: Registering ACPI NVS region [mem 0x7f355000-0x7f7fffff] (4894720 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: [8086:0e06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:0e0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xdfe1c000-0xdfe1ffff 64bit]
pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xdfe18000-0xdfe1bfff 64bit]
pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xdfe14000-0xdfe17fff 64bit]
pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xdfe10000-0xdfe13fff 64bit]
pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xdfe0c000-0xdfe0ffff 64bit]
pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xdfe08000-0xdfe0bfff 64bit]
pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xdfe04000-0xdfe07fff 64bit]
pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xdfe00000-0xdfe03fff 64bit]
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xdfe25000-0xdfe25fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdfe23000-0xdfe233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdfe22000-0xdfe223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x9050-0x9057]
pci 0000:00:1f.2: reg 0x14: [io 0x9040-0x9043]
pci 0000:00:1f.2: reg 0x18: [io 0x9030-0x9037]
pci 0000:00:1f.2: reg 0x1c: [io 0x9020-0x9023]
pci 0000:00:1f.2: reg 0x20: [io 0x9000-0x901f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdfe21000-0xdfe217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdfe20000-0xdfe200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f]
pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1000:0086] type 00 class 0x010700
pci 0000:03:00.0: reg 0x10: [io 0x8000-0x80ff]
pci 0000:03:00.0: reg 0x14: [mem 0xdfc40000-0xdfc4ffff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0xdfc00000-0xdfc3ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xdfb00000-0xdfbfffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:02.2: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:04:00.0: [15b3:1003] type 00 class 0x028000
pci 0000:04:00.0: reg 0x10: [mem 0xdfa00000-0xdfafffff 64bit]
pci 0000:04:00.0: reg 0x18: [mem 0xde000000-0xde7fffff 64bit pref]
pci 0000:04:00.0: reg 0x30: [mem 0xdf900000-0xdf9fffff pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0: bridge window [mem 0xdf900000-0xdfafffff]
pci 0000:00:03.0: bridge window [mem 0xde000000-0xde7fffff 64bit pref]
pci 0000:05:00.0: [8086:1521] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xdfd60000-0xdfd7ffff]
pci 0000:05:00.0: reg 0x18: [io 0x7060-0x707f]
pci 0000:05:00.0: reg 0x1c: [mem 0xdfd8c000-0xdfd8ffff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: reg 0x184: [mem 0xde8e0000-0xde8e3fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR0 space: [mem 0xde8e0000-0xde8fffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.0: reg 0x190: [mem 0xde8c0000-0xde8c3fff 64bit pref]
pci 0000:05:00.0: VF(n) BAR3 space: [mem 0xde8c0000-0xde8dffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.1: [8086:1521] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [mem 0xdfd40000-0xdfd5ffff]
pci 0000:05:00.1: reg 0x18: [io 0x7040-0x705f]
pci 0000:05:00.1: reg 0x1c: [mem 0xdfd88000-0xdfd8bfff]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: reg 0x184: [mem 0xde8a0000-0xde8a3fff 64bit pref]
pci 0000:05:00.1: VF(n) BAR0 space: [mem 0xde8a0000-0xde8bffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.1: reg 0x190: [mem 0xde880000-0xde883fff 64bit pref]
pci 0000:05:00.1: VF(n) BAR3 space: [mem 0xde880000-0xde89ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.2: [8086:1521] type 00 class 0x020000
pci 0000:05:00.2: reg 0x10: [mem 0xdfd20000-0xdfd3ffff]
pci 0000:05:00.2: reg 0x18: [io 0x7020-0x703f]
pci 0000:05:00.2: reg 0x1c: [mem 0xdfd84000-0xdfd87fff]
pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
pci 0000:05:00.2: reg 0x184: [mem 0xde860000-0xde863fff 64bit pref]
pci 0000:05:00.2: VF(n) BAR0 space: [mem 0xde860000-0xde87ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.2: reg 0x190: [mem 0xde840000-0xde843fff 64bit pref]
pci 0000:05:00.2: VF(n) BAR3 space: [mem 0xde840000-0xde85ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:05:00.3: [8086:1521] type 00 class 0x020000
pci 0000:05:00.3: reg 0x10: [mem 0xdfd00000-0xdfd1ffff]
pci 0000:05:00.3: reg 0x18: [io 0x7000-0x701f]
pci 0000:05:00.3: reg 0x1c: [mem 0xdfd80000-0xdfd83fff]
pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
pci 0000:05:00.3: reg 0x184: [mem 0xde820000-0xde823fff 64bit pref]
pci 0000:05:00.3: VF(n) BAR0 space: [mem 0xde820000-0xde83ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:05:00.3: reg 0x190: [mem 0xde800000-0xde803fff 64bit pref]
pci 0000:05:00.3: VF(n) BAR3 space: [mem 0xde800000-0xde81ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:03.2: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:03.2: bridge window [mem 0xde800000-0xde8fffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:08:01.0: [102b:0532] type 00 class 0x030000
pci 0000:08:01.0: reg 0x10: [mem 0xdd000000-0xddffffff pref]
pci 0000:08:01.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
pci 0000:08:01.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:7f:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:7f:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:7f:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:7f:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:7f:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:7f:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:7f:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:7f:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:7f:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:7f:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:7f:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:7f:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:7f:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:7f: on NUMA node 0
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: platform does not support [PME AER]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-fe]
pci_bus 0000:80: root bus resource [io 0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
pci 0000:80:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: System wakeup disabled by ACPI
pci 0000:80:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: System wakeup disabled by ACPI
pci 0000:80:02.2: [8086:0e06] type 01 class 0x060400
pci 0000:80:02.2: PME# supported from D0 D3hot D3cold
pci 0000:80:02.2: System wakeup disabled by ACPI
pci 0000:80:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:80:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf20000-0xfbf20fff]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.2: PCI bridge to [bus 83]
pci_bus 0000:80: on NUMA node 1
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:ff:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 1
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI Error: [\_SB_.PRAD] Namespace lookup failure, AE_NOT_FOUND (20130517/psargs-359)
ACPI Error: Method parse/execution failed [\_GPE._L24] (Node ffff8810e9c8ef28), AE_NOT_FOUND (20130517/psparse-536)
ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L24] (20130517/evgpe-579)
vgaarb: device added: PCI:0000:08:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:01.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7de07000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [mem 0x00000400-0x000004ff] could not be reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0b00-0x0b7f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0400-0x0453] could not be reserved
system 00:08: [io 0x0458-0x047f] has been reserved
system 00:08: [io 0x1180-0x119f] has been reserved
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:09: [io 0x0454-0x0457] has been reserved
system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0b: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.2: PCI bridge to [bus 03]
pci 0000:00:02.2: bridge window [io 0x8000-0x8fff]
pci 0000:00:02.2: bridge window [mem 0xdfb00000-0xdfcfffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:03.0: bridge window [mem 0xdf900000-0xdfafffff]
pci 0000:00:03.0: bridge window [mem 0xde000000-0xde7fffff 64bit pref]
pci 0000:00:03.2: PCI bridge to [bus 05-06]
pci 0000:00:03.2: bridge window [io 0x7000-0x7fff]
pci 0000:00:03.2: bridge window [mem 0xdfd00000-0xdfdfffff]
pci 0000:00:03.2: bridge window [mem 0xde800000-0xde8fffff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0: bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:00: resource 11 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:03: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfcfffff]
pci_bus 0000:04: resource 1 [mem 0xdf900000-0xdfafffff]
pci_bus 0000:04: resource 2 [mem 0xde000000-0xde7fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:05: resource 1 [mem 0xdfd00000-0xdfdfffff]
pci_bus 0000:05: resource 2 [mem 0xde800000-0xde8fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xdf000000-0xdf8fffff]
pci_bus 0000:08: resource 2 [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0x9fff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0xfed08000-0xfed08fff window]
pci_bus 0000:08: resource 11 [mem 0xfed0e000-0xfed0ffff window]
pci_bus 0000:08: resource 12 [mem 0x80000000-0xdfffffff window]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:02.2: PCI bridge to [bus 83]
pci_bus 0000:80: resource 4 [io 0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:08:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 20880k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x79e07000-0x7de07000] (64MB) mapped at [ffff880079e07000-ffff88007de06fff]
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
sha1_ssse3: Using AVX optimized SHA-1 implementation
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 16384 (order: 8, 1048576 bytes)
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1502910933.244:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
ioapic: probe of 0000:80:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfe23000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.0-514.21.1.el7.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfe22000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10.0-514.21.1.el7.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: Hermon USB hidmouse Device
usb 1-1.3: Manufacturer: Winbond Electronics Corp
tsc: Refined TSC clocksource calibration: 2499.999 MHz
i8042: No controller found
Switched to clocksource tsc
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
cpuidle: using governor menu
hidraw: raw HID events driver (C) Jiri Kosina
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input3
hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU6 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU7 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU8 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU9 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU10 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU11 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU12 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU13 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU14 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU15 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU16 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU17 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU18 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU19 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU20 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU21 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU22 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU23 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU24 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU25 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU26 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU27 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU28 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU29 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU30 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU31 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU32 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU33 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU34 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU35 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU36 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU37 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU38 sig=0x306e4, pf=0x1, revision=0x428
microcode: CPU39 sig=0x306e4, pf=0x1, revision=0x428
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Loading compiled-in X.509 certificates
Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717'
Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b'
Loaded X.509 cert 'CentOS Linux kernel signing key: 8e8a72db1afef85d97e6c5b228dbfc11ce88e88e'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:02: setting system clock to 2017-08-16 19:15:35 UTC (1502910935)
Freeing unused kernel memory: 1680k freed
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Journal Service.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
dca service started, version 1.12.1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
mpt2sas version 20.102.00.00 loaded
mpt2sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (131826864 kB)
PTP clock support registered
libata version 3.00 loaded.
mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[drm] Initialized drm 1.1.0 20060810
mlx4_core: Initializing 0000:04:00.0
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
igb 0000:05:00.0: irq 31 for MSI/MSI-X
igb 0000:05:00.0: irq 31 for MSI/MSI-X
igb 0000:05:00.0: irq 32 for MSI/MSI-X
igb 0000:05:00.0: irq 33 for MSI/MSI-X
igb 0000:05:00.0: irq 34 for MSI/MSI-X
igb 0000:05:00.0: irq 35 for MSI/MSI-X
igb 0000:05:00.0: irq 36 for MSI/MSI-X
igb 0000:05:00.0: irq 37 for MSI/MSI-X
ahci 0000:00:1f.2: version 3.0
igb 0000:05:00.0: irq 38 for MSI/MSI-X
igb 0000:05:00.0: irq 39 for MSI/MSI-X
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[TTM] Zone kernel: Available graphics memory: 65913432 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
ata1: SATA max UDMA/133 abar m2048@0xdfe21000 port 0xdfe21100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xdfe21000 port 0xdfe21180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xdfe21000 port 0xdfe21200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xdfe21000 port 0xdfe21280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xdfe21000 port 0xdfe21300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xdfe21000 port 0xdfe21380 irq 40
fbcon: mgadrmfb (fb0) is primary device
mpt2sas_cm0: MSI-X vectors supported: 16, no of cores: 40, max_msix_vectors: -1
mpt2sas 0000:03:00.0: irq 41 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 42 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 43 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 44 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 45 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 46 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 47 for MSI/MSI-X
mpt2sas 0000:03:00.0: irq 48 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 41
mpt2sas0-msix1: PCI-MSI-X enabled: IRQ 42
mpt2sas0-msix2: PCI-MSI-X enabled: IRQ 43
mpt2sas0-msix3: PCI-MSI-X enabled: IRQ 44
mpt2sas0-msix4: PCI-MSI-X enabled: IRQ 45
mpt2sas0-msix5: PCI-MSI-X enabled: IRQ 46
mpt2sas0-msix6: PCI-MSI-X enabled: IRQ 47
mpt2sas0-msix7: PCI-MSI-X enabled: IRQ 48
mpt2sas_cm0: iomem(0x00000000dfc40000), mapped(0xffffc9000cbe0000), size(65536)
mpt2sas_cm0: ioport(0x0000000000008000), size(256)
mpt2sas_cm0: sending diag reset !!
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:ef:e9:44
igb 0000:05:00.0: eth0: PBA No: 020000-000
igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:05:00.1: irq 50 for MSI/MSI-X
igb 0000:05:00.1: irq 50 for MSI/MSI-X
igb 0000:05:00.1: irq 51 for MSI/MSI-X
igb 0000:05:00.1: irq 52 for MSI/MSI-X
igb 0000:05:00.1: irq 53 for MSI/MSI-X
igb 0000:05:00.1: irq 54 for MSI/MSI-X
igb 0000:05:00.1: irq 55 for MSI/MSI-X
igb 0000:05:00.1: irq 56 for MSI/MSI-X
igb 0000:05:00.1: irq 57 for MSI/MSI-X
igb 0000:05:00.1: irq 58 for MSI/MSI-X
Console: switching to colour frame buffer device 128x48
mgag200 0000:08:01.0: fb0: mgadrmfb frame buffer device
igb 0000:05:00.1: added PHC on eth1
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:ef:e9:45
igb 0000:05:00.1: eth1: PBA No: 020000-000
igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:05:00.2: irq 60 for MSI/MSI-X
igb 0000:05:00.2: irq 60 for MSI/MSI-X
igb 0000:05:00.2: irq 61 for MSI/MSI-X
igb 0000:05:00.2: irq 62 for MSI/MSI-X
igb 0000:05:00.2: irq 63 for MSI/MSI-X
igb 0000:05:00.2: irq 64 for MSI/MSI-X
igb 0000:05:00.2: irq 65 for MSI/MSI-X
igb 0000:05:00.2: irq 66 for MSI/MSI-X
igb 0000:05:00.2: irq 67 for MSI/MSI-X
igb 0000:05:00.2: irq 68 for MSI/MSI-X
[drm] Initialized mgag200 1.0.0 20110418 for 0000:08:01.0 on minor 0
igb 0000:05:00.2: added PHC on eth2
igb 0000:05:00.2: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.2: eth2: (PCIe:5.0Gb/s:Width x4) 00:25:90:ef:e9:46
igb 0000:05:00.2: eth2: PBA No: 020000-000
igb 0000:05:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:05:00.3: irq 70 for MSI/MSI-X
igb 0000:05:00.3: irq 70 for MSI/MSI-X
igb 0000:05:00.3: irq 71 for MSI/MSI-X
igb 0000:05:00.3: irq 74 for MSI/MSI-X
igb 0000:05:00.3: irq 75 for MSI/MSI-X
igb 0000:05:00.3: irq 76 for MSI/MSI-X
igb 0000:05:00.3: irq 77 for MSI/MSI-X
igb 0000:05:00.3: irq 78 for MSI/MSI-X
igb 0000:05:00.3: irq 79 for MSI/MSI-X
igb 0000:05:00.3: irq 80 for MSI/MSI-X
igb 0000:05:00.3: added PHC on eth3
igb 0000:05:00.3: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.3: eth3: (PCIe:5.0Gb/s:Width x4) 00:25:90:ef:e9:47
igb 0000:05:00.3: eth3: PBA No: 020000-000
igb 0000:05:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
mpt2sas_cm0: diag reset: SUCCESS
mpt2sas_cm0: Allocated physical memory: size(7012 kB)
mpt2sas_cm0: Current Controller Queue Depth(2936),Max Controller Queue Depth(3072)
mpt2sas_cm0: Scatter Gather Elements per IO(128)
mpt2sas_cm0: LSISAS2308: FWVersion(16.00.01.00), ChipRevision(0x05), BiosVersion(07.31.00.00)
mpt2sas_cm0: Protocol=(
Initiator
),
Capabilities=(
Raid
,TLR
,EEDP
,Snapshot Buffer
,Diag Trace Buffer
,Task Set Full
,NCQ
)
scsi host0: Fusion MPT SAS Host
mpt2sas_cm0: sending port enable !!
mpt2sas_cm0: host_add: handle(0x0001), sas_addr(0x5003048018ec5400), phys(8)
mlx4_core 0000:04:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s
mlx4_core 0000:04:00.0: PCIe link width is x8, device supports x8
mlx4_core 0000:04:00.0: irq 81 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 82 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 83 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 84 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 85 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 86 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 87 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 88 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 89 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 90 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 91 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 92 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 93 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 94 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 95 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 96 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 97 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 98 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 99 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 100 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 101 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 102 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 103 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 104 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 105 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 106 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 107 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 108 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 109 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 110 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 111 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 112 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 113 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 114 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 115 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 116 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 117 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 118 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 119 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 120 for MSI/MSI-X
mlx4_core 0000:04:00.0: irq 121 for MSI/MSI-X
mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
mpt2sas_cm0: port enable: SUCCESS
scsi 0:0:0:0: Direct-Access ATA ST3000DM001-1ER1 CC43 PQ: 0 ANSI: 6
scsi 0:0:0:0: SATA: handle(0x000b), sas_addr(0x4433221102000000), phy(2), device_name(0x5000c5006723e8cd)
scsi 0:0:0:0: SATA: enclosure_logical_id(0x5003048018ec5400), slot(1)
scsi 0:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:0:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access ATA MB3000GCWDB HPGE PQ: 0 ANSI: 6
scsi 0:0:1:0: SATA: handle(0x0009), sas_addr(0x4433221101000000), phy(1), device_name(0x5000c5007b1a5c88)
scsi 0:0:1:0: SATA: enclosure_logical_id(0x5003048018ec5400), slot(2)
scsi 0:0:1:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:1:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:2:0: Direct-Access ATA ST3000DM001-1ER1 CC43 PQ: 0 ANSI: 6
scsi 0:0:2:0: SATA: handle(0x000a), sas_addr(0x4433221107000000), phy(7), device_name(0x5000c50067266478)
scsi 0:0:2:0: SATA: enclosure_logical_id(0x5003048018ec5400), slot(4)
scsi 0:0:2:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y)
scsi 0:0:2:0: qdepth(32), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 0:0:1:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:2:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:2:0: [sdc] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 7f 00 10 08
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:2:0: [sdc] Write Protect is off
sd 0:0:2:0: [sdc] Mode Sense: 7f 00 10 08
sd 0:0:2:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 7f 00 10 08
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sda: sda1
sdc: sdc1 sdc2 sdc3
sdb: sdb1
sd 0:0:2:0: [sdc] Attached SCSI disk
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
md: bind
md: bind
md: bind
md: raid0 personality registered for level 0
md/raid0:md127: md_size is 17568215040 sectors.
md: RAID0 configuration for md127 - 1 zone
md: zone0=[sdc3/sdb1/sda1]
zone-offset= 0KB, device-offset= 0KB, size=8784107520KB
md127: detected capacity change from 0 to 8994926100480
SGI XFS with ACLs, security attributes, no debug enabled
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Ending clean mount
systemd-journald[294]: Received SIGTERM from PID 1 (systemd).
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1502910946.970:2): selinux=0 auid=4294967295 ses=4294967295
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[862]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ipmi message handler version 39.2
wmi: Mapper loaded
iTCO_vendor_support: vendor-support=0
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: irq 123 for MSI/MSI-X
igb 0000:05:00.0: DCA enabled
igb 0000:05:00.1: DCA enabled
ioatdma 0000:00:04.1: irq 125 for MSI/MSI-X
igb 0000:05:00.2: DCA enabled
igb 0000:05:00.3: DCA enabled
ioatdma 0000:00:04.2: irq 126 for MSI/MSI-X
ioatdma 0000:00:04.3: irq 127 for MSI/MSI-X
ioatdma 0000:00:04.4: irq 128 for MSI/MSI-X
ioatdma 0000:00:04.5: irq 129 for MSI/MSI-X
ioatdma 0000:00:04.6: irq 130 for MSI/MSI-X
ioatdma 0000:00:04.7: irq 131 for MSI/MSI-X
ioatdma 0000:80:04.0: irq 133 for MSI/MSI-X
ioatdma 0000:80:04.1: irq 135 for MSI/MSI-X
ioatdma 0000:80:04.2: irq 136 for MSI/MSI-X
ioatdma 0000:80:04.3: irq 137 for MSI/MSI-X
ioatdma 0000:80:04.4: irq 138 for MSI/MSI-X
ioatdma 0000:80:04.5: irq 139 for MSI/MSI-X
ioatdma 0000:80:04.6: irq 140 for MSI/MSI-X
ioatdma 0000:80:04.7: irq 141 for MSI/MSI-X
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
input: PC Speaker as /devices/platform/pcspkr/input/input4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:2:0: Attached scsi generic sg2 type 0
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
EDAC MC: Ver: 3.0.0
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Ivy Bridge Socket#0': DEV 0000:7f:0e.0
EDAC MC1: Giving out device to 'sbridge_edac.c' 'Ivy Bridge Socket#1': DEV 0000:ff:0e.0
EDAC sbridge: Ver: 1.1.1
ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0702, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
alg: No test for crc32 (crc32-pclmul)
ipmi device interface
Adding 4194300k swap on /dev/mapper/cl--raid0-swap. Priority:-1 extents:1 across:4194300k FS
mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v2.2-1 (Feb 2014)
mlx4_ib_add: counter index 0 for port 1 allocated 0
XFS (sdc2): Mounting V5 Filesystem
Rounding down aligned max_sectors from 4294967295 to 4294967288
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (iser)
RPC: Registered rdma transport module.
RPC: Registered rdma backchannel transport module.
XFS (sdc2): Ending clean mount
XFS (dm-2): Mounting V5 Filesystem
XFS (dm-2): Ending clean mount
type=1305 audit(1502910953.068:3): audit_pid=1444 old=0 auid=4294967295 ses=4294967295 res=1
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno4: link is not ready
igb 0000:05:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
igb 0000:05:00.1 eno2: igb: eno2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
igb 0000:05:00.0: changing MTU from 1500 to 9000
ib0: enabling connected mode will cause multicast packet drops
ib0: mtu > 4092 will cause multicast packet drops.
IPv6: ADDRCONF(NETDEV_UP): ib0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
igb 0000:05:00.0 eno1: igb: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
fuse init (API version 7.22)
systemd-readahead[866]: open(/fstest) failed: Transport endpoint is not connected
perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3158 > 3147), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3948 > 3947), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4951 > 4935), lowering kernel.perf_event_max_sample_rate to 40000