dmesg - h
microcode: microcode updated early to revision 0x1c, date = 2015-02-26
Linux version 4.11.10-300.fc26.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 7.1.1 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Wed Jul 12 17:05:39 UTC 2017
Command line: BOOT_IMAGE=/vmlinuz-4.11.10-300.fc26.x86_64 root=/dev/mapper/fedora_fedora--dragon-root ro rd.driver.blacklist=nouveau modprobe.blacklist=nouveau rd.lvm.lv=fedora_fedora-dragon/root rd.lvm.lv=fedora_fedora-dragon/swap rhgb quiet iommu=1 intel_iommu=on rd.driver.pre=vfio-pci LANG=en_US.UTF-8
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cdef6fff] usable
BIOS-e820: [mem 0x00000000cdef7000-0x00000000ce101fff] reserved
BIOS-e820: [mem 0x00000000ce102000-0x00000000ce102fff] ACPI data
BIOS-e820: [mem 0x00000000ce103000-0x00000000ce22afff] ACPI NVS
BIOS-e820: [mem 0x00000000ce22b000-0x00000000cea42fff] reserved
BIOS-e820: [mem 0x00000000cea43000-0x00000000cea43fff] usable
BIOS-e820: [mem 0x00000000cea44000-0x00000000cea86fff] ACPI NVS
BIOS-e820: [mem 0x00000000cea87000-0x00000000cf46bfff] usable
BIOS-e820: [mem 0x00000000cf46c000-0x00000000cf7d6fff] reserved
BIOS-e820: [mem 0x00000000cf7d7000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x8d1e6018-0x8d1f6057] usable ==> usable
e820: update [mem 0x8d1d6018-0x8d1e5857] usable ==> usable
e820: update [mem 0x8d1b5018-0x8d1d5457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000008d1b5017] usable
reserve setup_data: [mem 0x000000008d1b5018-0x000000008d1d5457] usable
reserve setup_data: [mem 0x000000008d1d5458-0x000000008d1d6017] usable
reserve setup_data: [mem 0x000000008d1d6018-0x000000008d1e5857] usable
reserve setup_data: [mem 0x000000008d1e5858-0x000000008d1e6017] usable
reserve setup_data: [mem 0x000000008d1e6018-0x000000008d1f6057] usable
reserve setup_data: [mem 0x000000008d1f6058-0x00000000cdef6fff] usable
reserve setup_data: [mem 0x00000000cdef7000-0x00000000ce101fff] reserved
reserve setup_data: [mem 0x00000000ce102000-0x00000000ce102fff] ACPI data
reserve setup_data: [mem 0x00000000ce103000-0x00000000ce22afff] ACPI NVS
reserve setup_data: [mem 0x00000000ce22b000-0x00000000cea42fff] reserved
reserve setup_data: [mem 0x00000000cea43000-0x00000000cea43fff] usable
reserve setup_data: [mem 0x00000000cea44000-0x00000000cea86fff] ACPI NVS
reserve setup_data: [mem 0x00000000cea87000-0x00000000cf46bfff] usable
reserve setup_data: [mem 0x00000000cf46c000-0x00000000cf7d6fff] reserved
reserve setup_data: [mem 0x00000000cf7d7000-0x00000000cf7fffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000042effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xce20c000 ACPI 2.0=0xce20c000 SMBIOS=0xf04c0 MPS=0xfd410
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./G1.Sniper M3-CF, BIOS F10f 04/29/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 420000000 mask FF8000000 write-back
3 base 428000000 mask FFC000000 write-back
4 base 42C000000 mask FFE000000 write-back
5 base 42E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 base 0D0000000 mask FF0000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8fe8400fd710]
Base memory trampoline at [ffff8fe840097000] 97000 size 24576
BRK [0x3b2385000, 0x3b2385fff] PGTABLE
BRK [0x3b2386000, 0x3b2386fff] PGTABLE
BRK [0x3b2387000, 0x3b2387fff] PGTABLE
BRK [0x3b2388000, 0x3b2388fff] PGTABLE
BRK [0x3b2389000, 0x3b2389fff] PGTABLE
BRK [0x3b238a000, 0x3b238afff] PGTABLE
BRK [0x3b238b000, 0x3b238bfff] PGTABLE
BRK [0x3b238c000, 0x3b238cfff] PGTABLE
BRK [0x3b238d000, 0x3b238dfff] PGTABLE
BRK [0x3b238e000, 0x3b238efff] PGTABLE
BRK [0x3b238f000, 0x3b238ffff] PGTABLE
BRK [0x3b2390000, 0x3b2390fff] PGTABLE
Secure boot disabled
RAMDISK: [mem 0x3d225000-0x3e918fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000CE20C000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CE20C078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CE215D00 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CE20C188 009B77 (v02 ALASKA A M I 00000012 INTL 20051117)
ACPI: FACS 0x00000000CE229F80 000040
ACPI: APIC 0x00000000CE215DF8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000CE215E90 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000CE215ED0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CE215F08 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CE216278 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CE216C28 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000CE2176C0 000080 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: BGRT 0x00000000CE217740 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: MATS 0x00000000CE217778 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
NODE_DATA(0) allocated [mem 0x42efc9000-0x42eff3fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000cdef6fff]
node 0: [mem 0x00000000cea43000-0x00000000cea43fff]
node 0: [mem 0x00000000cea87000-0x00000000cf46bfff]
node 0: [mem 0x00000000cf7d7000-0x00000000cf7fffff]
node 0: [mem 0x0000000100000000-0x000000042effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
On node 0 totalpages: 4184228
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13157 pages used for memmap
DMA32 zone: 841990 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8d1b5000-0x8d1b5fff]
PM: Registered nosave memory: [mem 0x8d1d5000-0x8d1d5fff]
PM: Registered nosave memory: [mem 0x8d1d6000-0x8d1d6fff]
PM: Registered nosave memory: [mem 0x8d1e5000-0x8d1e5fff]
PM: Registered nosave memory: [mem 0x8d1e6000-0x8d1e6fff]
PM: Registered nosave memory: [mem 0x8d1f6000-0x8d1f6fff]
PM: Registered nosave memory: [mem 0xcdef7000-0xce101fff]
PM: Registered nosave memory: [mem 0xce102000-0xce102fff]
PM: Registered nosave memory: [mem 0xce103000-0xce22afff]
PM: Registered nosave memory: [mem 0xce22b000-0xcea42fff]
PM: Registered nosave memory: [mem 0xcea44000-0xcea86fff]
PM: Registered nosave memory: [mem 0xcf46c000-0xcf7d6fff]
PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff8fec6ec00000 s108888 r8192 d30376 u262144
pcpu-alloc: s108888 r8192 d30376 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4118822
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.10-300.fc26.x86_64 root=/dev/mapper/fedora_fedora--dragon-root ro rd.driver.blacklist=nouveau modprobe.blacklist=nouveau rd.lvm.lv=fedora_fedora-dragon/root rd.lvm.lv=fedora_fedora-dragon/swap rhgb quiet iommu=1 intel_iommu=on rd.driver.pre=vfio-pci LANG=en_US.UTF-8
DMAR: IOMMU enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16149896K/16736912K available (8687K kernel code, 1668K rwdata, 3604K rodata, 2120K init, 1816K bss, 587016K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3403.365 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6806.73 BogoMIPS (lpj=3403365)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20170119
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 31978 entries in 125 pages
smpboot: Max logical packages: 2
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000ce099000 end: 0x000000ce0a5fff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (54485.93 BogoMIPS)
sched_clock: Marking stable (461000000, 0)->(494012970, -33012970)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xce103000-0xce22afff] (1212416 bytes)
PM: Registering ACPI NVS region [mem 0xcea44000-0xcea86fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:56:59, date: 07/19/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FEC5BEC6000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FEC5BEE2C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8FEC5BF09200 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7235000-0xf723500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7236000-0xf7236fff]
pci 0000:00:19.0: reg 0x18: [io 0xf000-0xf01f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7237000-0xf72373ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7230000-0xf7233fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: Enabling MPC IRBNCE
pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7238000-0xf72383ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf723b000-0xf723b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf723a000-0xf723a0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf020-0xf03f]
pci 0000:02:00.0: [10de:100a] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:02:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:02:00.1: [10de:0e1a] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7100000-0xf713ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7140000-0xf715ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7160000-0xf7163fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:02:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8d1b5018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8d1d6018-0x8fffffff]
e820: reserve RAM buffer [mem 0x8d1e6018-0x8fffffff]
e820: reserve RAM buffer [mem 0xcdef7000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcea44000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf46c000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xea000000-0xea000fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xd0000000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 23504K
DMAR: No ATSR found
DMAR: dmar0: Using Queued invalidation
DMAR: Setting RMRR:
DMAR: Setting identity map for device 0000:00:14.0 [0xce099000 - 0xce0a5fff]
DMAR: Setting identity map for device 0000:00:1a.0 [0xce099000 - 0xce0a5fff]
DMAR: Setting identity map for device 0000:00:1d.0 [0xce099000 - 0xce0a5fff]
DMAR: Prepare 0-16MiB unity mapping for LPC
DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
DMAR: Intel(R) Virtualization Technology for Directed I/O
iommu: Adding device 0000:00:00.0 to group 0, default domain type -1
iommu: Adding device 0000:00:01.0 to group 1, default domain type -1
iommu: Adding device 0000:00:14.0 to group 2, default domain type -1
iommu: Adding device 0000:00:16.0 to group 3, default domain type -1
iommu: Adding device 0000:00:19.0 to group 4, default domain type -1
iommu: Adding device 0000:00:1a.0 to group 5, default domain type -1
iommu: Adding device 0000:00:1b.0 to group 6, default domain type -1
iommu: Adding device 0000:00:1c.0 to group 7, default domain type -1
iommu: Adding device 0000:00:1d.0 to group 8, default domain type -1
iommu: Adding device 0000:00:1f.0 to group 9, default domain type -1
iommu: Adding device 0000:00:1f.2 to group 9, default domain type -1
iommu: Adding device 0000:00:1f.3 to group 9, default domain type -1
iommu: Adding device 0000:02:00.0 to group 1, default domain type -1
iommu: Adding device 0000:02:00.1 to group 1, default domain type -1
iommu: Adding device 0000:01:00.0 to group 10, default domain type -1
iommu: Adding device 0000:01:00.1 to group 10, default domain type -1
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1500461819.798:1): state=initialized audit_enabled=0 res=1
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
efifb: probing for efifb
efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf723b000 port 0xf723b100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xf723b000 port 0xf723b180 irq 26
ata3: SATA max UDMA/133 abar m2048@0xf723b000 port 0xf723b200 irq 26
ata4: SATA max UDMA/133 abar m2048@0xf723b000 port 0xf723b280 irq 26
ata5: DUMMY
ata6: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7237000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.11.10-300.fc26.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7238000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.11.10-300.fc26.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.11.10-300.fc26.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.11.10-300.fc26.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x306a9, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: 0ba927e393b46dba83729c7040f106c7e941c156'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
Magic number: 9:384:932
rtc_cmos 00:02: setting system clock to 2017-07-19 10:57:00 UTC (1500461820)
PM: Hibernation image not present or could not be loaded.
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8fec5e0be7f8), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff8fec5e0bea28), AE_NOT_FOUND (20170119/psparse-543)
ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-9: WDC WD10EFRX-68PJCN0, 01.01A01, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8fec5e0be7f8), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8fec5e0be230), AE_NOT_FOUND (20170119/psparse-543)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff8fec5e0bea28), AE_NOT_FOUND (20170119/psparse-543)
ata2.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8fec5e0be3c0), AE_NOT_FOUND (20170119/psparse-543)
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: ATA-8: WDC WD7502AAEX-00Z3A0, 05.01D05, max UDMA/133
ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff8fec5e0be230), AE_NOT_FOUND (20170119/psparse-543)
ata3.00: configured for UDMA/133
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 PRO 512GB, EXM01B6Q, max UDMA/133
ata1.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8fec5e0be3c0), AE_NOT_FOUND (20170119/psparse-543)
ata1.00: supports DRM functions and may not be fully accessible
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:0:0: [sda] Write Protect is off
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD7502AAEX-0 1D05 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: Direct-Access ATA WDC WD10EFRX-68P 1A01 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sdd] 4096-byte physical blocks
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdd: sdd1
sd 3:0:0:0: [sdd] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
Freeing unused kernel memory: 2120K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1536K
Freeing unused kernel memory: 492K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
usb 3-4: new high-speed USB device number 2 using xhci_hcd
random: systemd: uninitialized urandom read (16 bytes read)
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Local File Systems.
audit: type=1130 audit(1500461820.925:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500461820.929:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500461820.937:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1500461820.937:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500461820.968:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500461821.008:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 3-4: New USB device found, idVendor=8564, idProduct=4000
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4: Product: USB2.0 Hub
usb 3-4: Manufacturer: Transcend
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
audit: type=1130 audit(1500461821.031:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500461821.036:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500461821.079:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 4-4: New USB device found, idVendor=8564, idProduct=4000
usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-4: Product: USB3.0 Hub
usb 4-4: Manufacturer: Transcend
hub 4-4:1.0: USB hub found
hub 4-4:1.0: 4 ports detected
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x174B:0xE214 0x00).
[drm] register mmio base: 0xF7100000
[drm] register mmio size: 262144
ATOM BIOS: C44101
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 8228414 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:1e10 = 1123042/0
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:1e10 = 1123042/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8fec546f0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8fec546f0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8fec546f0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8fec546f0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8fec546f0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffb48642a35a18
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8fec546f0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8fec546f0c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=00b1
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: Aureon 7.1 USB
input: Aureon 7.1 USB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.3/0003:0CCD:00B1.0001/input/input5
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
hid-generic 0003:0CCD:00B1.0001: input,hidraw0: USB HID v1.00 Device [Aureon 7.1 USB] on usb-0000:00:1a.0-1.2/input3
usb 3-4.2: new full-speed USB device number 3 using xhci_hcd
usb 1-1.5: new low-speed USB device number 4 using ehci-pci
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 90:2b:34:3f:a7:30
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
tsc: Refined TSC clocksource calibration: 3403.346 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x310ea79c150, max_idle_ns: 440795317982 ns
usb 3-4.2: New USB device found, idVendor=24c6, idProduct=5d04
usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4.2: Product: Razer Sabertooth Elite
usb 3-4.2: Manufacturer: Razer
usb 3-4.2: SerialNumber: 5995FA44
usb 1-1.5: New USB device found, idVendor=04d9, idProduct=0129
usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.5: Product: USB Keyboard
input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:04D9:0129.0002/input/input6
random: fast init done
usb 4-4.3: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-4.3: New USB device found, idVendor=8564, idProduct=1000
usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4.3: Product: Mass Storage Device
usb 4-4.3: Manufacturer: JetFlash
usb 4-4.3: SerialNumber: 39HFFVA1OZ6CU9L0
usb-storage 4-4.3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-4.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
hid-generic 0003:04D9:0129.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:1a.0-1.5/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:04D9:0129.0003/input/input7
hid-generic 0003:04D9:0129.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:1a.0-1.5/input1
usb 1-1.6: new low-speed USB device number 5 using ehci-pci
usb 1-1.6: New USB device found, idVendor=046d, idProduct=c051
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB-PS/2 Optical Mouse
usb 1-1.6: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C051.0004/input/input8
hid-generic 0003:046D:C051.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.6/input0
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 11 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 15 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
clocksource: Switched to clocksource tsc
scsi 6:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sde] 15425536 512-byte logical blocks: (7.90 GB/7.36 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD3
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD05D9000
[drm] vram apper at 0xD0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
random: crng init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[253]: Received SIGTERM from PID 1 (systemd).
systemd: 16 output lines suppressed due to ratelimiting
SELinux: 32768 avtab hash slots, 108175 rules.
SELinux: 32768 avtab hash slots, 108175 rules.
SELinux: 8 users, 14 roles, 5108 types, 315 bools, 1 sens, 1024 cats
SELinux: 94 classes, 108175 rules
SELinux: Class sctp_socket not defined in policy.
SELinux: Class icmp_socket not defined in policy.
SELinux: Class ax25_socket not defined in policy.
SELinux: Class ipx_socket not defined in policy.
SELinux: Class netrom_socket not defined in policy.
SELinux: Class atmpvc_socket not defined in policy.
SELinux: Class x25_socket not defined in policy.
SELinux: Class rose_socket not defined in policy.
SELinux: Class decnet_socket not defined in policy.
SELinux: Class atmsvc_socket not defined in policy.
SELinux: Class rds_socket not defined in policy.
SELinux: Class irda_socket not defined in policy.
SELinux: Class pppox_socket not defined in policy.
SELinux: Class llc_socket not defined in policy.
SELinux: Class can_socket not defined in policy.
SELinux: Class tipc_socket not defined in policy.
SELinux: Class bluetooth_socket not defined in policy.
SELinux: Class iucv_socket not defined in policy.
SELinux: Class rxrpc_socket not defined in policy.
SELinux: Class isdn_socket not defined in policy.
SELinux: Class phonet_socket not defined in policy.
SELinux: Class ieee802154_socket not defined in policy.
SELinux: Class caif_socket not defined in policy.
SELinux: Class alg_socket not defined in policy.
SELinux: Class nfc_socket not defined in policy.
SELinux: Class vsock_socket not defined in policy.
SELinux: Class kcm_socket not defined in policy.
SELinux: Class qipcrtr_socket not defined in policy.
SELinux: Class smc_socket not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 101.558ms.
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
systemd[1]: Relabelled /dev and /run in 28.132ms.
systemd-journald[621]: File /run/log/journal/8756e4dbdeec430ba9d9b0e85112d0af/system.journal corrupted or uncleanly shut down, renaming and replacing.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[621]: Received request to flush runtime journal from PID 1
kauditd_printk_skb: 51 callbacks suppressed
audit: type=1130 audit(1500451025.429:62): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000051F (\LED) (20170119/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
input: Razer Sabertooth as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input9
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
usbcore: registered new interface driver xpad
EDAC ie31200: No ECC support
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:02:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: enabling device (0100 -> 0102)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
usb 1-1.2: current rate 30464 is different from the runtime rate 96000
nvidia 0000:02:00.0: enabling device (0000 -> 0003)
radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
nvidia-nvlink: Nvlink Core is being initialized, major device number 240
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.66 Mon May 1 15:29:16 PDT 2017 (using threaded interrupts)
snd_hda_codec_ca0132 hdaudioC1D2: autoconfig for CA0132: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_ca0132 hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC1D2: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
snd_hda_codec_ca0132 hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_ca0132 hdaudioC1D2: dig-out=0xc/0x0
snd_hda_codec_ca0132 hdaudioC1D2: inputs:
snd_hda_codec_ca0132 hdaudioC1D2: Mic=0x12
snd_hda_codec_ca0132 hdaudioC1D2: Line=0x11
usb 1-1.2: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 1-1.2: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input15
usb 1-1.2: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 1-1.2: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.66 Mon May 1 14:33:30 PDT 2017
usb 1-1.2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-1.2: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 1
usb 1-1.2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-1.2: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
usb 1-1.2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-1.2: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
usbcore: registered new interface driver snd-usb-audio
snd_hda_intel 0000:00:1b.0: Direct firmware load for ctefx.bin failed with error -2
audit: type=1130 audit(1500451025.761:63): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: HDA Intel PCH Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
Adding 8269820k swap on /dev/mapper/fedora_fedora--dragon-swap. Priority:-1 extents:1 across:8269820k SSFS
audit: type=1130 audit(1500451025.782:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card2/input19
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card2/input20
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card2/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card2/input22
audit: type=1130 audit(1500451026.777:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500451026.865:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1500451026.865:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1500451027.450:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@8:3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1500451027.472:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck@dev-mapper-fedora_fedora\x2d\x2ddragon\x2dhome comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
nvidia-modeset: Allocated GPU:0 (GPU-16de2a44-db4f-3337-34db-cae8ba229b6d) @ PCI:0000:02:00.0
tun: Universal TUN/TAP device driver, 1.6
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.1: new high-speed USB device number 6 using ehci-pci
usb 1-1.2: USB disconnect, device number 3
usb 1-1.1: new high-speed USB device number 7 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0644, idProduct=8051
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: TEAC AI-101 Audio
usb 1-1.1: Manufacturer: TEAC
usb 1-1.1: SerialNumber: ACEGIKMOQSUWY0
usb 1-1.2: new full-speed USB device number 8 using ehci-pci
usb 1-1.2: New USB device found, idVendor=0ccd, idProduct=00b1
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: Aureon 7.1 USB
usb 1-1.2: current rate 30464 is different from the runtime rate 96000
usb 1-1.2: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 1-1.2: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
usb 1-1.2: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 1-1.2: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
usb 1-1.2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-1.2: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
usb 1-1.2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-1.2: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
usb 1-1.2: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 1-1.2: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
input: Aureon 7.1 USB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.3/0003:0CCD:00B1.0005/input/input23
hid-generic 0003:0CCD:00B1.0005: input,hidraw0: USB HID v1.00 Device [Aureon 7.1 USB] on usb-0000:00:1a.0-1.2/input3
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.2: cannot submit urb 0, error -28: not enough bandwidth
usb 1-1.1: USB disconnect, device number 7
usb 1-1.1: cannot submit urb (err = -19)
usb 1-1.1: cannot submit urb (err = -19)
usb 1-1.1: new high-speed USB device number 9 using ehci-pci
usb 1-1.1: new high-speed USB device number 10 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0644, idProduct=8051
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: TEAC AI-101 Audio
usb 1-1.1: Manufacturer: TEAC
usb 1-1.1: SerialNumber: ACEGIKMOQSUWY0
usb 1-1.1: USB disconnect, device number 10
usb 1-1.1: new high-speed USB device number 11 using ehci-pci
usb 1-1.1: new high-speed USB device number 12 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0644, idProduct=8051
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: TEAC AI-101 Audio
usb 1-1.1: Manufacturer: TEAC
usb 1-1.1: SerialNumber: ACEGIKMOQSUWY0
usb 4-4.3: USB disconnect, device number 3
sd 6:0:0:0: [sde] Synchronizing SCSI cache
sd 6:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
usb 4-4.3: new SuperSpeed USB device number 4 using xhci_hcd
usb 4-4.3: New USB device found, idVendor=8564, idProduct=1000
usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-4.3: Product: Mass Storage Device
usb 4-4.3: Manufacturer: JetFlash
usb 4-4.3: SerialNumber: 39HFFVA1OZ6CU9L0
usb-storage 4-4.3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-4.3:1.0
scsi 6:0:0:0: Direct-Access JetFlash Transcend 8GB 1100 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg4 type 0
sd 6:0:0:0: [sde] 15425536 512-byte logical blocks: (7.90 GB/7.36 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
perf: interrupt took too long (2530 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3201 > 3162), lowering kernel.perf_event_max_sample_rate to 62000
perf: interrupt took too long (4018 > 4001), lowering kernel.perf_event_max_sample_rate to 49000
VFIO - User Level meta-driver version: 0.3
vfio_pci: add [174b:e214[ffff:ffff]] class 0x000000/00000000
vfio_pci: add [174b:aab0[ffff:ffff]] class 0x000000/00000000
Console: switching to colour dummy device 80x25
[drm] radeon: finishing device.
[TTM] Finalizing pool allocator
[TTM] Finalizing DMA pool allocator
[TTM] Zone kernel: Used memory at exit: 12 kiB
[TTM] Zone dma32: Used memory at exit: 4 kiB
[drm] radeon: ttm finalized
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=none,decodes=io+mem:owns=io+mem
vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x270
xpad 3-4.2:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -2
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
input: Razer Sabertooth as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input24
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x174B:0xE214 0x00).
[drm] register mmio base: 0xF7100000
[drm] register mmio size: 262144
ATOM BIOS: C44101
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 8228414 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:1e10 = 1123042/0
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:1e10 = 1123042/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8feb9c5e9c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8feb9c5e9c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8feb9c5e9c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8feb9c5e9c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8feb9c5e9c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffb48642a35a18
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8feb9c5e9c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8feb9c5e9c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 10 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 16 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD3
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD05D9000
[drm] vram apper at 0xD0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: enabling device (0400 -> 0402)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input25
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input26
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input27
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input28
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input29
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card3/input30
Console: switching to colour dummy device 80x25
[drm] radeon: finishing device.
[TTM] Finalizing pool allocator
[TTM] Finalizing DMA pool allocator
[TTM] Zone kernel: Used memory at exit: 12 kiB
[TTM] Zone dma32: Used memory at exit: 4 kiB
[drm] radeon: ttm finalized
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
vfio_ecap_init: 0000:01:00.0 hiding ecap 0x19@0x270
xpad 3-4.2:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -2
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
usb 1-1.1: USB disconnect, device number 12
usb 1-1.1: cannot submit urb (err = -19)
usb 1-1.1: cannot submit urb (err = -19)
usb 3-4.2: reset full-speed USB device number 3 using xhci_hcd
input: Razer Sabertooth as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input31
vfio-pci 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x174B:0xE214 0x00).
[drm] register mmio base: 0xF7100000
[drm] register mmio size: 262144
ATOM BIOS: C44101
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 8228414 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading verde Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:1e10 = 1123042/0
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 50.0.1 / 17!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:1e10 = 1123042/0
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8febcd1b5c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff8febcd1b5c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff8febcd1b5c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8febcd1b5c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff8febcd1b5c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffb48643235a18
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff8febcd1b5c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff8febcd1b5c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 0 usecs
[drm] ring test on 1 succeeded in 0 usecs
[drm] ring test on 2 succeeded in 0 usecs
[drm] ring test on 3 succeeded in 11 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 15 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD3
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xD05D9000
[drm] vram apper at 0xD0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 0
snd_hda_intel 0000:01:00.1: enabling device (0400 -> 0402)
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card0/input32
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card0/input33
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card0/input34
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card0/input35
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card0/input36
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1c.0/0000:01:00.1/sound/card0/input37
usb 1-1.1: new high-speed USB device number 13 using ehci-pci
usb 1-1.1: new high-speed USB device number 14 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0644, idProduct=8051
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: TEAC AI-101 Audio
usb 1-1.1: Manufacturer: TEAC
usb 1-1.1: SerialNumber: ACEGIKMOQSUWY0
usb 1-1.1: USB disconnect, device number 14
usb 1-1.1: cannot submit urb (err = -19)
usb 1-1.1: cannot submit urb (err = -19)
show_signal_msg: 7 callbacks suppressed
KSP.x86[15908]: segfault at b79d22fc ip 00000000c6c9da8a sp 00000000ffe181b0 error 4 in libsteam_api.so[c6c8c000+32000]
usb 1-1.1: new high-speed USB device number 15 using ehci-pci
usb 1-1.1: new high-speed USB device number 16 using ehci-pci
usb 1-1.1: New USB device found, idVendor=0644, idProduct=8051
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: TEAC AI-101 Audio
usb 1-1.1: Manufacturer: TEAC
usb 1-1.1: SerialNumber: ACEGIKMOQSUWY0
usb 3-4.2: USB disconnect, device number 3
xpad 3-4.2:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
usb 3-4.2: new full-speed USB device number 4 using xhci_hcd
usb 3-4.2: New USB device found, idVendor=24c6, idProduct=5d04
usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4.2: Product: Razer Sabertooth Elite
usb 3-4.2: Manufacturer: Razer
usb 3-4.2: SerialNumber: 5995FA44
input: Razer Sabertooth as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input38
usb 3-4.2: USB disconnect, device number 4
xpad 3-4.2:1.0: xpad_try_sending_next_out_packet - usb_submit_urb failed with result -19
usb 3-4.2: new full-speed USB device number 5 using xhci_hcd
usb 3-4.2: New USB device found, idVendor=0e8f, idProduct=0003
usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.2: Product: USB Joystick
usb 3-4.2: Manufacturer: MY-POWER CO.,LTD.
input: MY-POWER CO.,LTD. USB Joystick as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:0E8F:0003.0006/input/input39
pantherlord 0003:0E8F:0003.0006: input,hidraw4: USB HID v1.10 Joystick [MY-POWER CO.,LTD. USB Joystick] on usb-0000:00:14.0-4.2/input0
pantherlord 0003:0E8F:0003.0006: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula
usb 3-4-port2: disabled by hub (EMI?), re-enabling...
usb 3-4.2: USB disconnect, device number 5
usb 3-4.2: new full-speed USB device number 6 using xhci_hcd
usb 3-4.2: New USB device found, idVendor=0e8f, idProduct=0003
usb 3-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-4.2: Product: USB Joystick
usb 3-4.2: Manufacturer: MY-POWER CO.,LTD.
input: MY-POWER CO.,LTD. USB Joystick as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:0E8F:0003.0007/input/input40
pantherlord 0003:0E8F:0003.0007: input,hidraw4: USB HID v1.10 Joystick [MY-POWER CO.,LTD. USB Joystick] on usb-0000:00:14.0-4.2/input0
pantherlord 0003:0E8F:0003.0007: Force feedback for PantherLord/GreenAsia devices by Anssi Hannula