dmesg - r7-3800ddr4-3466
Linux version 4.8.0-58-generic (buildd@lgw01-21) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #63~16.04.1-Ubuntu SMP Mon Jun 26 18:08:51 UTC 2017 (Ubuntu 4.8.0-58.63~16.04.1-generic 4.8.17)
Command line: BOOT_IMAGE=/vmlinuz-4.8.0-58-generic root=/dev/mapper/mint--vg-root ro quiet splash
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x00000000dcd1afff] usable
BIOS-e820: [mem 0x00000000dcd1b000-0x00000000dce5bfff] reserved
BIOS-e820: [mem 0x00000000dce5c000-0x00000000dcf55fff] usable
BIOS-e820: [mem 0x00000000dcf56000-0x00000000dd329fff] ACPI NVS
BIOS-e820: [mem 0x00000000dd32a000-0x00000000de3e6fff] reserved
BIOS-e820: [mem 0x00000000de3e7000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: MSI MS-7A33/X370 KRAIT GAMING (MS-7A33), BIOS 1.40 06/22/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFE0000000 write-back
3 base 0000DF000000 mask FFFFFF000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
total RAM covered: 3568M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 3 lose cover RAM: 0G
e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9c4280097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x3b43c000, 0x3b43cfff] PGTABLE
BRK [0x3b43d000, 0x3b43dfff] PGTABLE
BRK [0x3b43e000, 0x3b43efff] PGTABLE
BRK [0x3b43f000, 0x3b43ffff] PGTABLE
BRK [0x3b440000, 0x3b440fff] PGTABLE
BRK [0x3b441000, 0x3b441fff] PGTABLE
BRK [0x3b442000, 0x3b442fff] PGTABLE
BRK [0x3b443000, 0x3b443fff] PGTABLE
BRK [0x3b444000, 0x3b444fff] PGTABLE
RAMDISK: [mem 0x32dd6000-0x356e2fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DCF56090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DCF5C270 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
ACPI: DSDT 0x00000000DCF561D0 00609E (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DD313E00 000040
ACPI: APIC 0x00000000DCF5C388 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DCF5C468 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DCF5C4B0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DCF5C550 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
ACPI: CRAT 0x00000000DCF651A0 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DCF660F0 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DCF66120 0017D2 (v01 AMD AMD AOD 00000001 INTL 20120913)
ACPI: MCFG 0x00000000DCF678F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000DCF67938 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 0x00000000DCF67970 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
ACPI: UEFI 0x00000000DCF67998 000042 (v01 00000000 00000000)
ACPI: IVRS 0x00000000DCF679E0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
ACPI: SSDT 0x00000000DCF67AB0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: SSDT 0x00000000DCF67BA8 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
ACPI: BGRT 0x00000000DCF69210 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041f37ffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
node 0: [mem 0x000000000a000000-0x00000000dcd1afff]
node 0: [mem 0x00000000dce5c000-0x00000000dcf55fff]
node 0: [mem 0x00000000de3e7000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041f37ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4180682
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14111 pages used for memmap
DMA32 zone: 903086 pages, LIFO batch:31
Normal zone: 51150 pages used for memmap
Normal zone: 3273600 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
PM: Registered nosave memory: [mem 0xdcd1b000-0xdce5bfff]
PM: Registered nosave memory: [mem 0xdcf56000-0xdd329fff]
PM: Registered nosave memory: [mem 0xdd32a000-0xde3e6fff]
PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9c469ec00000 s107864 r8192 d31400 u262144
pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115336
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-58-generic root=/dev/mapper/mint--vg-root ro quiet splash
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16331108K/16722728K available (8829K kernel code, 1441K rwdata, 3836K rodata, 1552K init, 1296K bss, 391620K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:33024 nr_irqs:1096 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3799.819 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7599.63 BogoMIPS (lpj=15199276)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 23 MCE banks
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff952ee000 - ffffffff952f6000)
ftrace: allocating 33460 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Ryzen 7 1700 Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
Performance Events:
core perfctr but no constraints; unknown hardware!
no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (121594.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdcf56000-0xdd329fff] (4014080 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 23:18:43, date: 07/15/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: System wakeup disabled by ACPI
pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:07.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
pci 0000:03:00.0: [1022:43b9] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe7a0000-0xfe7a7fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:03:00.1: [1022:43b5] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfe780000-0xfe79ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfe700000-0xfe77ffff pref]
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43b0] type 01 class 0x060400
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-22]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D3hot D3cold
pci 0000:04:01.0: System wakeup disabled by ACPI
pci 0000:04:02.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D3hot D3cold
pci 0000:04:03.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:03.0: PME# supported from D3hot D3cold
pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D3hot D3cold
pci 0000:04:08.0: [1022:43b4] type 01 class 0x060400
pci 0000:04:08.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 04-22]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:1e:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:1e:00.0: reg 0x10: [io 0xf000-0xf0ff]
pci 0000:1e:00.0: reg 0x18: [mem 0xfe604000-0xfe604fff 64bit]
pci 0000:1e:00.0: reg 0x20: [mem 0xfe600000-0xfe603fff 64bit]
pci 0000:1e:00.0: supports D1 D2
pci 0000:1e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:01.0: PCI bridge to [bus 1e]
pci 0000:04:01.0: bridge window [io 0xf000-0xffff]
pci 0000:04:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:04:02.0: PCI bridge to [bus 1f]
pci 0000:04:03.0: PCI bridge to [bus 20]
pci 0000:04:04.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [1b21:2142] type 00 class 0x0c0330
pci 0000:22:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
pci 0000:22:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:08.0: PCI bridge to [bus 22]
pci 0000:04:08.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:23:00.0: [1002:67df] type 00 class 0x030000
pci 0000:23:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:23:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:23:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:23:00.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:23:00.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:23:00.0: supports D1 D2
pci 0000:23:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:23:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:23:00.1: reg 0x10: [mem 0xfe960000-0xfe963fff 64bit]
pci 0000:23:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 23]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:24:00.0: [1022:145a] type 00 class 0x130000
pci 0000:24:00.2: [1022:1456] type 00 class 0x108000
pci 0000:24:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
pci 0000:24:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
pci 0000:24:00.3: [1022:145c] type 00 class 0x0c0330
pci 0000:24:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
pci 0000:24:00.3: PME# supported from D0 D3hot D3cold
pci 0000:24:00.3: System wakeup disabled by ACPI
pci 0000:00:07.1: PCI bridge to [bus 24]
pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:25:00.0: [1022:1455] type 00 class 0x130000
pci 0000:25:00.2: [1022:7901] type 00 class 0x010601
pci 0000:25:00.2: reg 0x24: [mem 0xfe808000-0xfe808fff]
pci 0000:25:00.2: PME# supported from D3hot D3cold
pci 0000:25:00.3: [1022:1457] type 00 class 0x040300
pci 0000:25:00.3: reg 0x10: [mem 0xfe800000-0xfe807fff]
pci 0000:25:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 25]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:23:00.0
vgaarb: device added: PCI:0000:23:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:23:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdcd1b000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdcf56000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x040b] has been reserved
system 00:06: [io 0x04d6] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c51] has been reserved
system 00:06: [io 0x0c52] has been reserved
system 00:06: [io 0x0c6c] has been reserved
system 00:06: [io 0x0c6f] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0800-0x089f] has been reserved
system 00:06: [io 0x0b00-0x0b0f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0900-0x090f] has been reserved
system 00:06: [io 0x0910-0x091f] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:01.0: PCI bridge to [bus 1e]
pci 0000:04:01.0: bridge window [io 0xf000-0xffff]
pci 0000:04:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:04:02.0: PCI bridge to [bus 1f]
pci 0000:04:03.0: PCI bridge to [bus 20]
pci 0000:04:04.0: PCI bridge to [bus 21]
pci 0000:04:08.0: PCI bridge to [bus 22]
pci 0000:04:08.0: bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:03:00.2: PCI bridge to [bus 04-22]
pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
pci 0000:03:00.2: bridge window [mem 0xfe500000-0xfe6fffff]
pci 0000:00:01.3: PCI bridge to [bus 03-22]
pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
pci 0000:00:01.3: bridge window [mem 0xfe500000-0xfe7fffff]
pci 0000:00:03.1: PCI bridge to [bus 23]
pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
pci 0000:00:03.1: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 24]
pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
pci 0000:00:08.1: PCI bridge to [bus 25]
pci 0000:00:08.1: bridge window [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfe500000-0xfe7fffff]
pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfe500000-0xfe6fffff]
pci_bus 0000:1e: resource 0 [io 0xf000-0xffff]
pci_bus 0000:1e: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:22: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:23: resource 0 [io 0xe000-0xefff]
pci_bus 0000:23: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:23: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:24: resource 1 [mem 0xfe200000-0xfe4fffff]
pci_bus 0000:25: resource 1 [mem 0xfe800000-0xfe8fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:23:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 42036K (ffff9c42b2dd6000 - ffff9c42b56e3000)
AMD-Vi: IOMMU performance counters supported
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
iommu: Adding device 0000:00:01.0 to group 0
iommu: Adding device 0000:00:01.3 to group 1
iommu: Adding device 0000:00:02.0 to group 2
iommu: Adding device 0000:00:03.0 to group 3
iommu: Adding device 0000:00:03.1 to group 4
iommu: Adding device 0000:00:04.0 to group 5
iommu: Adding device 0000:00:07.0 to group 6
iommu: Adding device 0000:00:07.1 to group 6
iommu: Adding device 0000:00:08.0 to group 7
iommu: Adding device 0000:00:08.1 to group 7
iommu: Adding device 0000:00:14.0 to group 8
iommu: Adding device 0000:00:14.3 to group 8
iommu: Adding device 0000:00:18.0 to group 9
iommu: Adding device 0000:00:18.1 to group 9
iommu: Adding device 0000:00:18.2 to group 9
iommu: Adding device 0000:00:18.3 to group 9
iommu: Adding device 0000:00:18.4 to group 9
iommu: Adding device 0000:00:18.5 to group 9
iommu: Adding device 0000:00:18.6 to group 9
iommu: Adding device 0000:00:18.7 to group 9
iommu: Adding device 0000:03:00.0 to group 10
iommu: Adding device 0000:03:00.1 to group 10
iommu: Adding device 0000:03:00.2 to group 10
iommu: Adding device 0000:04:00.0 to group 10
iommu: Adding device 0000:04:01.0 to group 10
iommu: Adding device 0000:04:02.0 to group 10
iommu: Adding device 0000:04:03.0 to group 10
iommu: Adding device 0000:04:04.0 to group 10
iommu: Adding device 0000:04:08.0 to group 10
iommu: Adding device 0000:1e:00.0 to group 10
iommu: Adding device 0000:22:00.0 to group 10
iommu: Adding device 0000:23:00.0 to group 11
iommu: Using direct mapping for device 0000:23:00.0
iommu: Adding device 0000:23:00.1 to group 11
iommu: Adding device 0000:24:00.0 to group 6
iommu: Adding device 0000:24:00.2 to group 6
iommu: Adding device 0000:24:00.3 to group 6
iommu: Adding device 0000:25:00.0 to group 7
iommu: Adding device 0000:25:00.2 to group 7
iommu: Adding device 0000:25:00.3 to group 7
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Extended features: PPR NX GT IA GA PC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
perf: AMD NB counters detected
perf: AMD L2I counters detected
perf: amd_iommu: Detected. (0 banks, 0 counters/bank)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1500160723.664:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.3:pcie002: service driver aer loaded
aer 0000:00:03.1:pcie002: service driver aer loaded
pcieport 0000:00:01.3: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:03:00.2: Signaling PME through PCIe PME interrupt
pcieport 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:01.0: Signaling PME through PCIe PME interrupt
pci 0000:1e:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:04.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:08.0: Signaling PME through PCIe PME interrupt
pci 0000:22:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.3:pcie001: service driver pcie_pme loaded
pcieport 0000:00:03.1: Signaling PME through PCIe PME interrupt
pci 0000:23:00.0: Signaling PME through PCIe PME interrupt
pci 0000:23:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.1:pcie001: service driver pcie_pme loaded
pcieport 0000:00:07.1: Signaling PME through PCIe PME interrupt
pci 0000:24:00.0: Signaling PME through PCIe PME interrupt
pci 0000:24:00.2: Signaling PME through PCIe PME interrupt
pci 0000:24:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.1:pcie001: service driver pcie_pme loaded
pcieport 0000:00:08.1: Signaling PME through PCIe PME interrupt
pci 0000:25:00.0: Signaling PME through PCIe PME interrupt
pci 0000:25:00.2: Signaling PME through PCIe PME interrupt
pci 0000:25:00.3: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:08.1:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-58-generic xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-58-generic xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:22:00.0: xHCI Host Controller
xhci_hcd 0000:22:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:22:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-58-generic xhci-hcd
usb usb3: SerialNumber: 0000:22:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:22:00.0: xHCI Host Controller
xhci_hcd 0000:22:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-58-generic xhci-hcd
usb usb4: SerialNumber: 0000:22:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:24:00.3: xHCI Host Controller
xhci_hcd 0000:24:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:24:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.8.0-58-generic xhci-hcd
usb usb5: SerialNumber: 0000:24:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:24:00.3: xHCI Host Controller
xhci_hcd 0000:24:00.3: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.8.0-58-generic xhci-hcd
usb usb6: SerialNumber: 0000:24:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
------------[ cut here ]------------
WARNING: CPU: 10 PID: 1 at /build/linux-hwe-0IbwuF/linux-hwe-4.8.0/lib/kobject.c:210 kobject_add_internal+0x26c/0x330
kobject: (ffff9c4683cc9300): attempted to be registered with empty name!
Modules linked in:
CPU: 10 PID: 1 Comm: swapper/0 Not tainted 4.8.0-58-generic #63~16.04.1-Ubuntu
Hardware name: MSI MS-7A33/X370 KRAIT GAMING (MS-7A33), BIOS 1.40 06/22/2017
0000000000000286 000000002e117c81 ffff9c468ce13c78 ffffffff9462e553
ffff9c468ce13cc8 0000000000000000 ffff9c468ce13cb8 ffffffff9428316b
000000d200000000 ffff9c4683cc9300 00000000ffffffea ffff9c4683de9010
Call Trace:
[] dump_stack+0x63/0x90
[] __warn+0xcb/0xf0
[] warn_slowpath_fmt+0x5f/0x80
[] kobject_add_internal+0x26c/0x330
[] ? kfree_const+0x22/0x30
[] kobject_add+0x75/0xd0
[] kobject_create_and_add+0x31/0x70
[] threshold_create_device+0x17d/0x350
[] ? mcheck_vendor_init_severity+0x1a/0x1a
[] threshold_init_device+0x30/0x46
[] do_one_initcall+0x50/0x1a0
[] ? parse_args+0x2cf/0x490
[] kernel_init_freeable+0x178/0x217
[] kernel_init+0xe/0x100
[] ret_from_fork+0x1f/0x40
[] ? rest_init+0x80/0x80
---[ end trace 81288075d690a0a0 ]---
kobject_create_and_add: kobject_add error: -22
microcode: CPU0: patch_level=0x08001126
microcode: CPU1: patch_level=0x08001126
microcode: CPU2: patch_level=0x08001126
microcode: CPU3: patch_level=0x08001126
microcode: CPU4: patch_level=0x08001126
microcode: CPU5: patch_level=0x08001126
microcode: CPU6: patch_level=0x08001126
microcode: CPU7: patch_level=0x08001126
microcode: CPU8: patch_level=0x08001126
microcode: CPU9: patch_level=0x08001126
microcode: CPU10: patch_level=0x08001126
microcode: CPU11: patch_level=0x08001126
microcode: CPU12: patch_level=0x08001126
microcode: CPU13: patch_level=0x08001126
microcode: CPU14: patch_level=0x08001126
microcode: CPU15: patch_level=0x08001126
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 50b596b341980f3b7b3ec31aec506c1a2854de05'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:844:352
rtc_cmos 00:02: setting system clock to 2017-07-15 23:18:44 UTC (1500160724)
powernow_k8: This CPU is not supported anymore, using acpi-cpufreq instead.
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1552K (ffffffff9516a000 - ffffffff952ee000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1396K (ffff9c42baaa3000 - ffff9c42bac00000)
Freeing unused kernel memory: 260K (ffff9c42bafbf000 - ffff9c42bb000000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780100 irq 238
ata2: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780180 irq 238
ata3: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780200 irq 238
ata4: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780280 irq 238
ata5: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780300 irq 238
ata6: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780380 irq 238
ata7: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780400 irq 238
ata8: SATA max UDMA/133 abar m131072@0xfe780000 port 0xfe780480 irq 238
ahci 0000:25:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:25:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
ahci 0000:25:00.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
scsi host8: ahci
ata9: SATA max UDMA/133 abar m4096@0xfe808000 port 0xfe808100 irq 240
[drm] Initialized drm 1.1.0 20060810
r8169 0000:1e:00.0 eth0: RTL8168h/8111h at 0xffffc01741c4c000, 4c:cc:6a:f9:61:b9, XID 14100800 IRQ 256
r8169 0000:1e:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 0000:1e:00.0 enp30s0: renamed from eth0
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
Found CRAT image with size=3920
Parsing CRAT table with 0 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=4
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=6
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=8
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=10
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=12
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found cache entry in CRAT table with processor_id=14
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Found TLB entry in CRAT table (not processing)
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1DA2:0xE366 0xE7).
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 1022:1453 = 733903/e
[drm] probing mlw for device 1022:1453 = 733903
[drm] UVD is enabled in VM mode
amdgpu 0000:23:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
ATOM BIOS: E366
amdgpu 0000:23:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
amdgpu 0000:23:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone kernel: Available graphics memory: 8221168 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 2097152, num gpu pages 2097152
[drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:23:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
Can't find requested voltage id in vdd_dep_on_sclk table!
amdgpu: powerplay initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD6
[drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] HDMI-A-2
[drm] HPD5
[drm] DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY
amdgpu 0000:23:00.0: fence driver on ring 0 use gpu addr 0x0000000200000008, cpu addr 0xffff9c4684382008
amdgpu 0000:23:00.0: fence driver on ring 1 use gpu addr 0x0000000200000018, cpu addr 0xffff9c4684382018
amdgpu 0000:23:00.0: fence driver on ring 2 use gpu addr 0x0000000200000028, cpu addr 0xffff9c4684382028
amdgpu 0000:23:00.0: fence driver on ring 3 use gpu addr 0x0000000200000038, cpu addr 0xffff9c4684382038
amdgpu 0000:23:00.0: fence driver on ring 4 use gpu addr 0x0000000200000048, cpu addr 0xffff9c4684382048
amdgpu 0000:23:00.0: fence driver on ring 5 use gpu addr 0x0000000200000058, cpu addr 0xffff9c4684382058
amdgpu 0000:23:00.0: fence driver on ring 6 use gpu addr 0x0000000200000068, cpu addr 0xffff9c4684382068
amdgpu 0000:23:00.0: fence driver on ring 7 use gpu addr 0x0000000200000078, cpu addr 0xffff9c4684382078
amdgpu 0000:23:00.0: fence driver on ring 8 use gpu addr 0x0000000200000088, cpu addr 0xffff9c4684382088
amdgpu 0000:23:00.0: fence driver on ring 9 use gpu addr 0x0000000200000098, cpu addr 0xffff9c4684382098
amdgpu 0000:23:00.0: fence driver on ring 10 use gpu addr 0x00000002000000a8, cpu addr 0xffff9c46843820a8
[drm] Found UVD firmware Version: 1.79 Family ID: 16
amdgpu 0000:23:00.0: fence driver on ring 11 use gpu addr 0x000000000109c420, cpu addr 0xffffc0174325a420
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu 0000:23:00.0: fence driver on ring 12 use gpu addr 0x00000002000000c8, cpu addr 0xffff9c46843820c8
amdgpu 0000:23:00.0: fence driver on ring 13 use gpu addr 0x00000002000000d8, cpu addr 0xffff9c46843820d8
[AVFS] Something is broken. See log!VDDCI is larger than max VDDCI in VDDCI Voltage Table!
[drm] ring test on 0 succeeded in 9 usecs
[drm] ring test on 1 succeeded in 24 usecs
[drm] ring test on 2 succeeded in 14 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] ring test on 6 succeeded in 2 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] ring test on 8 succeeded in 2 usecs
[drm] ring test on 9 succeeded in 5 usecs
[drm] ring test on 10 succeeded in 5 usecs
usb 5-1: new high-speed USB device number 2 using xhci_hcd
[drm] ring test on 11 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 1-3: new high-speed USB device number 2 using xhci_hcd
ata9: SATA link down (SStatus 0 SControl 300)
[drm] ring test on 12 succeeded in 7 usecs
[drm] ring test on 13 succeeded in 4 usecs
[drm] VCE initialized successfully.
usb 5-1: New USB device found, idVendor=2109, idProduct=2812
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
usb 5-1: Manufacturer: VIA Labs, Inc.
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: SanDisk Ultra II 480GB, X41100RL, max UDMA/133
ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
usb 1-3: New USB device found, idVendor=cd12, idProduct=ef18
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DISK
usb 1-3: Manufacturer: USB
usb 1-3: SerialNumber: B845115B0110E9BF
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host9: usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-12: new low-speed USB device number 3 using xhci_hcd
[drm] fb mappable at 0xE12A6000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
usb 6-1: New USB device found, idVendor=2109, idProduct=0812
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB3.0 Hub
usb 6-1: Manufacturer: VIA Labs, Inc.
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 3800.003 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6d8cb6be331, max_idle_ns: 881591188494 ns
ata2: SATA link down (SStatus 0 SControl 300)
usb 5-3: new high-speed USB device number 3 using xhci_hcd
usb 1-12: New USB device found, idVendor=1532, idProduct=0001
usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-12: Product: Razer Diamonback Optical Mouse
usb 1-12: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer Diamonback Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.0/0003:1532:0001.0001/input/input5
hid-generic 0003:1532:0001.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamonback Optical Mouse] on usb-0000:03:00.0-12/input0
usb 5-3: New USB device found, idVendor=05e3, idProduct=0608
usb 5-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-3: Product: USB2.0 Hub
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
usb 1-13: new low-speed USB device number 4 using xhci_hcd
usb 5-4: new high-speed USB device number 5 using xhci_hcd
failed to send message 5e ret is 0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD5000BPVT-22HXZT3, 01.01A01, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD5000BPVT-2 1A01 PQ: 0 ANSI: 5
usb 1-13: New USB device found, idVendor=046d, idProduct=c312
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: USB Multimedia Keyboard
usb 1-13: Manufacturer: LITEON Technology
random: fast init done
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.0/0003:046D:C312.0002/input/input6
scsi 9:0:0:0: Direct-Access USB DISK 1.00 PQ: 0 ANSI: 2
hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:03:00.0-13/input0
failed to send pre message 155 ret is 0
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] 990249 512-byte logical blocks: (507 MB/484 MiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 9:0:0:0: [sdb] No Caching mode page found
sd 9:0:0:0: [sdb] Assuming drive cache: write through
usb 5-4: New USB device found, idVendor=046d, idProduct=0826
usb 5-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 5-4: Product: HD Webcam C525
usb 5-4: SerialNumber: 6C30EAA0
sdb: sdb1
sd 9:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 5-1.1: new high-speed USB device number 4 using xhci_hcd
usb 5-1.1: New USB device found, idVendor=2109, idProduct=2812
usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.1: Product: USB2.0 Hub
usb 5-1.1: Manufacturer: VIA Labs, Inc.
hub 5-1.1:1.0: USB hub found
hub 5-1.1:1.0: 4 ports detected
clocksource: Switched to clocksource tsc
usb 6-2: new SuperSpeed USB device number 3 using xhci_hcd
Console: switching to colour frame buffer device 160x64
amdgpu 0000:23:00.0: fb0: amdgpudrmfb frame buffer device
usb 6-2: New USB device found, idVendor=8564, idProduct=4000
usb 6-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5
usb 6-2: Product: Transcend
usb 6-2: Manufacturer: TS-RDF8
usb 6-2: SerialNumber: 000000082
usb-storage 6-2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 6-2:1.0
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
ata4: SATA link down (SStatus 0 SControl 300)
[drm] ib test on ring 11 succeeded
[drm] ib test on ring 12 succeeded
[drm] Initialized amdgpu 3.3.0 20150101 for 0000:23:00.0 on minor 0
usb 6-1.1: new SuperSpeed USB device number 4 using xhci_hcd
usb 6-1.1: New USB device found, idVendor=2109, idProduct=0812
usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1.1: Product: USB3.0 Hub
usb 6-1.1: Manufacturer: VIA Labs, Inc.
hub 6-1.1:1.0: USB hub found
hub 6-1.1:1.0: 4 ports detected
usb 5-3.4: new high-speed USB device number 6 using xhci_hcd
sdc:
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 5-3.4: New USB device found, idVendor=05e3, idProduct=0608
usb 5-3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-3.4: Product: USB2.0 Hub
hub 5-3.4:1.0: USB hub found
hub 5-3.4:1.0: 4 ports detected
scsi 10:0:0:0: Direct-Access Generic STORAGE DEVICE TS26 PQ: 0 ANSI: 6
scsi 10:0:0:1: Direct-Access Generic STORAGE DEVICE TS26 PQ: 0 ANSI: 6
scsi 10:0:0:2: Direct-Access Generic STORAGE DEVICE TS26 PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg3 type 0
sd 10:0:0:1: Attached scsi generic sg4 type 0
sd 10:0:0:2: Attached scsi generic sg5 type 0
sd 10:0:0:1: [sde] Attached SCSI removable disk
sd 10:0:0:2: [sdf] Attached SCSI removable disk
sd 10:0:0:0: [sdd] Attached SCSI removable disk
ata5: failed to resume link (SControl 0)
ata5: SATA link down (SStatus 0 SControl 0)
ata6: SATA link down (SStatus 0 SControl 330)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: TOSHIBA HDWJ110, AX1P1A, max UDMA/100
ata7.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/100
scsi 6:0:0:0: Direct-Access ATA TOSHIBA HDWJ110 1A PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg6 type 0
sd 6:0:0:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: [sdg] 4096-byte physical blocks
sd 6:0:0:0: [sdg] Write Protect is off
sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdg:
sd 6:0:0:0: [sdg] Attached SCSI disk
ata8: SATA link down (SStatus 0 SControl 300)
raid6: sse2x1 gen() 8001 MB/s
raid6: sse2x1 xor() 8036 MB/s
raid6: sse2x2 gen() 16653 MB/s
raid6: sse2x2 xor() 10932 MB/s
raid6: sse2x4 gen() 17566 MB/s
raid6: sse2x4 xor() 10291 MB/s
raid6: avx2x1 gen() 18144 MB/s
raid6: avx2x2 gen() 23614 MB/s
raid6: avx2x4 gen() 24044 MB/s
raid6: using algorithm avx2x4 gen() 24044 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function: avx
Btrfs loaded, crc32c=crc32c-intel
random: crng init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Audit Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[535]: Received request to flush runtime journal from PID 1
lp0: using parport0 (interrupt-driven).
nct6775: loading out-of-tree module taints kernel.
nct6775: module verification failed: signature and/or required key missing - tainting kernel
nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
kvm: disabled by bios
snd_hda_intel 0000:23:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:23:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input11
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:23:00.1/sound/card0/input12
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input13
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input14
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input15
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input16
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input17
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input18
input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input19
media: Linux media interface: v0.10
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:25:00.3/sound/card1/input20
Linux video capture interface: v2.00
usb 5-4: set resolution quirk: cval->res = 384
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
uvcvideo 5-4:1.2: Entity type for entity Extension 5 was not initialized!
uvcvideo 5-4:1.2: Entity type for entity Processing 2 was not initialized!
uvcvideo 5-4:1.2: Entity type for entity Camera 1 was not initialized!
uvcvideo 5-4:1.2: Entity type for entity Extension 6 was not initialized!
uvcvideo 5-4:1.2: Entity type for entity Extension 7 was not initialized!
uvcvideo 5-4:1.2: Entity type for entity Extension 8 was not initialized!
input: HD Webcam C525 as /devices/pci0000:00/0000:00:07.1/0000:24:00.3/usb5/5-4/5-4:1.2/input/input21
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Adding 16723452k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:16723452k SSFS
audit: type=1400 audit(1500160736.845:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1104 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1105 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1107 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1102 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1100 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1100 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1100 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1100 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1099 comm="apparmor_parser"
audit: type=1400 audit(1500160736.845:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1099 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
r8169 0000:1e:00.0 enp30s0: link down
r8169 0000:1e:00.0 enp30s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp30s0: link is not ready
r8169 0000:1e:00.0 enp30s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp30s0: link becomes ready
FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 5-4: reset high-speed USB device number 5 using xhci_hcd
Valid eCryptfs headers not found in file header region or xattr region, inode 5112273
show_signal_msg: 9 callbacks suppressed
conftest[23495]: segfault at 0 ip 00000000004005b0 sp 00007ffca10f0370 error 4 in conftest[400000+1000]
conftest[23523]: segfault at 0 ip 00007fdf057de5a6 sp 00007fffbe80b348 error 4 in libc-2.23.so[7fdf05690000+1c0000]
sh[13236]: segfault at 7fe20fe60b24 ip 00007fe20fb1bdec sp 00007fff2c935e10 error 7 in libc-2.23.so[7fe20fa9c000+1c0000]
Valid eCryptfs headers not found in file header region or xattr region, inode 5248836