dmesg - mate-gpu
Linux version 4.10.0-24-generic (buildd@lcy01-09) (gcc version 6.3.0 20170406 (Ubuntu 6.3.0-12ubuntu2) ) #28-Ubuntu SMP Wed Jun 14 08:14:34 UTC 2017 (Ubuntu 4.10.0-24.28-generic 4.10.15)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable
BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] ACPI NVS
BIOS-e820: [mem 0x0000000000088000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008a699fff] usable
BIOS-e820: [mem 0x000000008a69a000-0x000000008a899fff] type 20
BIOS-e820: [mem 0x000000008a89a000-0x000000008e599fff] reserved
BIOS-e820: [mem 0x000000008e59a000-0x000000008e719fff] ACPI NVS
BIOS-e820: [mem 0x000000008e71a000-0x000000008e799fff] ACPI data
BIOS-e820: [mem 0x000000008e79a000-0x000000008e79bfff] usable
BIOS-e820: [mem 0x000000008e79c000-0x000000008eb9efff] reserved
BIOS-e820: [mem 0x000000008eb9f000-0x000000008f7fffff] usable
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by Phoenix Technologies Ltd.
efi: ACPI=0x8e799000 ACPI 2.0=0x8e799014 SMBIOS=0x8e54c000 ESRT=0x8ce1a000
SMBIOS 2.7 present.
DMI: LENOVO 80TJ/Nano 5A8, BIOS 1QCN32WW 08/18/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFF0000000 write-back
2 base 00FF800000 mask FFFF800000 write-protect
3 base 00FED80000 mask FFFFFFF000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000022f000000 aka 8944M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8f800 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x000000008ce1a000 to 0x000000008ce1a038.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88bd00099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x5fc28000, 0x5fc28fff] PGTABLE
BRK [0x5fc29000, 0x5fc29fff] PGTABLE
BRK [0x5fc2a000, 0x5fc2afff] PGTABLE
BRK [0x5fc2b000, 0x5fc2bfff] PGTABLE
BRK [0x5fc2c000, 0x5fc2cfff] PGTABLE
BRK [0x5fc2d000, 0x5fc2dfff] PGTABLE
BRK [0x5fc2e000, 0x5fc2efff] PGTABLE
RAMDISK: [mem 0x32df3000-0x356f0fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008E799014 000024 (v02 LENOVO)
ACPI: XSDT 0x000000008E799200 0000DC (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: FACP 0x000000008E797000 00010C (v05 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: DSDT 0x000000008E78C000 006D42 (v01 LENOVO AMD 00001000 INTL 20120711)
ACPI: FACS 0x000000008E6F0000 000040
ACPI: HPET 0x000000008E796000 000038 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: APIC 0x000000008E795000 000090 (v02 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: MCFG 0x000000008E794000 00003C (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: SBST 0x000000008E793000 000030 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: UEFI 0x000000008E78A000 000042 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: POAT 0x000000008E6B6000 000055 (v03 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: BATB 0x000000008E789000 000046 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: FPDT 0x000000008E788000 000044 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: SLIC 0x000000008E787000 000176 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: SSDT 0x000000008E786000 000CB4 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: SSDT 0x000000008E781000 0048CE (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: CRAT 0x000000008E780000 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: VFCT 0x000000008E771000 00EA84 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: UEFI 0x000000008E770000 00026A (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: SSDT 0x000000008E76F000 000174 (v01 LENOVO CPMEC 00000001 INTL 20120711)
ACPI: SSDT 0x000000008E76D000 001505 (v01 LENOVO CPMDFIGP 00000001 INTL 20120711)
ACPI: SSDT 0x000000008E76C000 00082B (v01 LENOVO CPMDFDGP 00000001 INTL 20120711)
ACPI: SSDT 0x000000008E76A000 0015D3 (v01 LENOVO CPMCMN 00000001 INTL 20120711)
ACPI: TPM2 0x000000008E769000 000034 (v03 AMD AGESA 00000000 ACPI 00040000)
ACPI: SSDT 0x000000008E78B000 0007F6 (v01 LENOVO TPMACPI 00001000 INTL 20120711)
ACPI: SSDT 0x000000008E768000 000064 (v01 LENOVO CB-01 00001000 INTL 20120711)
ACPI: BGRT 0x000000008E767000 000038 (v01 LENOVO CB-01 00000002 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
NODE_DATA(0) allocated [mem 0x22efd3000-0x22effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000022effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000086fff]
node 0: [mem 0x0000000000088000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000008a699fff]
node 0: [mem 0x000000008e79a000-0x000000008e79bfff]
node 0: [mem 0x000000008eb9f000-0x000000008f7fffff]
node 0: [mem 0x0000000100000000-0x000000022effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000022effffff]
On node 0 totalpages: 1811098
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 8844 pages used for memmap
DMA32 zone: 566013 pages, LIFO batch:31
Normal zone: 19392 pages used for memmap
Normal zone: 1241088 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00087000-0x00087fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8a69a000-0x8a899fff]
PM: Registered nosave memory: [mem 0x8a89a000-0x8e599fff]
PM: Registered nosave memory: [mem 0x8e59a000-0x8e719fff]
PM: Registered nosave memory: [mem 0x8e71a000-0x8e799fff]
PM: Registered nosave memory: [mem 0x8e79c000-0x8eb9efff]
PM: Registered nosave memory: [mem 0x8f800000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xffffffff]
e820: [mem 0x8f800000-0xfed7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff88bf2ec00000 s107992 r8192 d31272 u524288
pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1782775
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 6942812K/7244392K available (9082K kernel code, 1666K rwdata, 3816K rodata, 2228K init, 2364K bss, 301580K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1000 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2195.842 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4391.68 BogoMIPS (lpj=8783368)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 9 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34180 entries in 134 pages
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (family: 0x16, model: 0x30, stepping: 0x1)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 93025624 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
#2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17566.73 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x00087000-0x00087fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8e59a000-0x8e719fff] (1572864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 8:47:52, date: 06/24/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI Error: No handler for Region [ERAM] (ffff88bf270ba5e8) [EmbeddedControl] (20160930/evregion-166)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB.PCI0.LPC0.EC0._REG] (Node ffff88bf270bb1b8), AE_NOT_EXIST (20160930/psparse-543)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff window]
pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff window]
pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff window]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff window]
pci_bus 0000:00: root bus resource [mem 0x000ce000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff window]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff window]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff window]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff window]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0f00000-0xf0f3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0f60000-0xf0f63fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: System wakeup disabled by ACPI
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: System wakeup disabled by ACPI
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0f40000-0xf0f5ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0c00000-0xf0cfffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0f6c000-0xf0f6cfff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0f6a000-0xf0f6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0f68000-0xf0f69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x3118-0x311f]
pci 0000:00:11.0: reg 0x14: [io 0x3124-0x3127]
pci 0000:00:11.0: reg 0x18: [io 0x3110-0x3117]
pci 0000:00:11.0: reg 0x1c: [io 0x3120-0x3123]
pci 0000:00:11.0: reg 0x20: [io 0x3100-0x310f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0f6d000-0xf0f6d3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf0f6d500-0xf0f6d5ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xf0f6d400-0xf0f6d4ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0f64000-0xf0f67fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0e00000-0xf0e3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0efffff]
pci 0000:00:02.1: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf0800000-0xf09fffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0d00000-0xf0d00fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.4: bridge window [mem 0xf0d00000-0xf0dfffff]
pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI Exception: AE_AML_OPERAND_TYPE, During return object analysis (20160930/nsrepair-187)
ACPI Warning: \_SB.PCI0.LPC0.HPET._CRS: Return type mismatch - found Integer, expected Buffer (20160930/nspredef-290)
ACPI Error: Return object type is incorrect [\_SB.PCI0.LPC0.HPET._CRS] (Node ffff88bf270c06b8), AE_TYPE (20160930/uteval-165)
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 0x4 (20160930/uteval-171)
ACPI Exception: AE_AML_OPERAND_TYPE, During return object analysis (20160930/nsrepair-187)
ACPI Error: Return object type is incorrect [\_SB.PCI0.LPC0.HPET._CRS] (Node ffff88bf270c06b8), AE_TYPE (20160930/uteval-165)
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 0x4 (20160930/uteval-171)
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:01.0: vgaarb: setting as boot VGA device
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00087000-0x0008ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8a69a000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8e79c000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0f50-0x0f51] has been reserved
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PTL0001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs ETD065e ETD0000 PNP0f13 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x0530-0x0537] has been reserved
system 00:04: [io 0x0800-0x0827] has been reserved
system 00:04: [io 0x0830] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: [io 0x0b00-0x0b1f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0cf9] could not be reserved
system 00:04: [io 0x8100-0x81ff window] has been reserved
system 00:04: [io 0x8200-0x82ff window] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:05: [mem 0xfed61000-0xfed613ff] has been reserved
system 00:05: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0b00000-0xf0b1ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0e40000-0xf0e5ffff pref]
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0efffff]
pci 0000:00:02.1: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.3: PCI bridge to [bus 02]
pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf09fffff]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.4: bridge window [mem 0xf0d00000-0xf0dfffff]
pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff window]
pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff window]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff window]
pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff window]
pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff window]
pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff window]
pci_bus 0000:00: resource 12 [mem 0x000ce000-0x000cffff window]
pci_bus 0000:00: resource 13 [mem 0x000d0000-0x000d1fff window]
pci_bus 0000:00: resource 14 [mem 0x000d2000-0x000d3fff window]
pci_bus 0000:00: resource 15 [mem 0x000d4000-0x000d5fff window]
pci_bus 0000:00: resource 16 [mem 0x000d6000-0x000d7fff window]
pci_bus 0000:00: resource 17 [mem 0x000d8000-0x000d9fff window]
pci_bus 0000:00: resource 18 [mem 0x000da000-0x000dbfff window]
pci_bus 0000:00: resource 19 [mem 0x000dc000-0x000ddfff window]
pci_bus 0000:00: resource 20 [mem 0x000de000-0x000dffff window]
pci_bus 0000:00: resource 21 [mem 0xd0000000-0xf7ffffff window]
pci_bus 0000:00: resource 22 [mem 0xfc000000-0xfdffffff window]
pci_bus 0000:00: resource 23 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 24 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0efffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:03: resource 1 [mem 0xf0d00000-0xf0dfffff]
pci_bus 0000:03: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 41976K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x834d3000-0x874d3000] (64MB) mapped at [ffff88bd834d3000-ffff88bd874d2fff]
perf: AMD NB counters detected
perf: AMD L2I counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fa6dad267b, max_idle_ns: 440795234829 ns
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1498294073.116:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:02.1: Signaling PME with IRQ 25
pcieport 0000:00:02.3: Signaling PME with IRQ 27
pcieport 0000:00:02.4: Signaling PME with IRQ 29
pciehp 0000:00:02.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
pciehp 0000:00:02.4:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
efifb: probing for efifb
efifb: framebuffer at 0xe0000000, using 4224k, total 4224k
efifb: mode is 1366x768x32, linelength=5632, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
ACPI Exception: AE_AML_OPERAND_TYPE, During return object analysis (20160930/nsrepair-187)
ACPI Error: Return object type is incorrect [\_SB.PCI0.LPC0.HPET._CRS] (Node ffff88bf270c06b8), AE_TYPE (20160930/uteval-165)
ACPI Error: Type returned from _CRS was incorrect: Integer, expected Btypes: 0x4 (20160930/uteval-171)
Linux agpgart interface v0.103
ACPI: Battery Slot [BATT] (battery present)
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf0f6d500
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xf0f6d400
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.0-24-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.0-24-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:10.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 27eede362a4e5dd307bee293ea5b775d0ffac6f6'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 5:885:776
rtc_cmos 00:01: setting system clock to 2017-06-24 08:47:53 UTC (1498294073)
acpi_cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1144K
Freeing unused kernel memory: 280K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI Warning: \_SB.PCI0.GFX.VGA.LCD._BCL: Return Package type mismatch at index 0 - found Buffer, expected Integer (20160930/nspredef-297)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:42: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[drm] Initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8106e at 0xffffb67f40d45000, 54:e1:ad:06:65:a3, XID 04900000 IRQ 36
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0f6d000 port 0xf0f6d100 irq 37
ata2: SATA max UDMA/133 abar m1024@0xf0f6d000 port 0xf0f6d180 irq 37
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
ATPX version 1, functions 0x00000003
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
Found CRAT image with size=936
Parsing CRAT table with 1 nodes
Found CU entry in CRAT table with proximity_domain=0 caps=0
CU CPU: cores=4 id_base=0
Found memory entry in CRAT table with proximity_domain=0
Found memory entry in CRAT table with proximity_domain=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=0
Found cache entry in CRAT table with processor_id=1
Found cache entry in CRAT table with processor_id=1
Found cache entry in CRAT table with processor_id=1
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=2
Found cache entry in CRAT table with processor_id=3
Found cache entry in CRAT table with processor_id=3
Found cache entry in CRAT table with processor_id=3
Creating topology SYSFS entries
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 420000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (MULLINS 0x1002:0x9851 0x17AA:0x380F 0x45).
[drm] register mmio base: 0xF0F00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 3522670 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading mullins Microcode
[drm] Internal thermal controller without fan control
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
r8169 0000:03:00.0 enp3s0: renamed from eth0
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88bf1caf8c00
radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88bf1caf8c04
radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88bf1caf8c08
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88bf1caf8c0c
radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88bf1caf8c10
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffb67f42038d30
radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0xffff88bf1caf8c18
radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0xffff88bf1caf8c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-pci
[drm] ring test on 6 succeeded in 12 usecs
[drm] ring test on 7 succeeded in 2 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
usb 2-1: New USB device found, idVendor=0438, idProduct=7900
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 3-1: New USB device found, idVendor=093a, idProduct=2510
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: Manufacturer: PixArt
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb3/3-1/3-1:1.0/0003:093A:2510.0001/input/input8
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:10.0-1/input0
usb 1-1: New USB device found, idVendor=0438, idProduct=7900
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: PLDS DVD-RW DA8AESH, XL61, max UDMA/133
ata2.00: configured for UDMA/133
usb 2-1.1: new full-speed USB device number 3 using ehci-pci
random: fast init done
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03)
psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a.
usb 2-1.1: New USB device found, idVendor=0cf3, idProduct=e360
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
psmouse serio1: elantech: Elan sample query result 05, 20, 97
[drm] ib test on ring 1 succeeded in 0 usecs
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0129
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB2.0-CRW
usb 1-1.4: Manufacturer: Generic
usb 1-1.4: SerialNumber: 20100201396000000
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
usbcore: registered new interface driver rtsx_usb
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
usb 2-1.2: New USB device found, idVendor=174f, idProduct=1173
usb 2-1.2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 2-1.2: Product: EasyCamera
usb 2-1.2: Manufacturer: 170227002716
usb 2-1.2: SerialNumber: 200901010001
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] eDP-1
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[drm] fb mappable at 0xE0722000
[drm] vram apper at 0xE0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0
radeon 0000:01:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (HAINAN 0x1002:0x6660 0x17AA:0x380F 0x83).
[drm] register mmio base: 0xF0E00000
[drm] register mmio size: 262144
vga_switcheroo: enabled
ATOM BIOS: Lenovo/LCFC
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hainan Microcode
[drm] Internal thermal controller without fan control
[drm] probing gen 2 caps for device 1022:1439 = 733c42/6
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 1022:1439 = 733c42/6
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88bf1b4d0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88bf1b4d0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88bf1b4d0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88bf1b4d0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88bf1b4d0c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 1
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
ATPX version 1, functions 0x00000003
ata1.00: ATA-10: ST1000LM035-1RK172, LVM1, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 LVM1 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM PLDS DVD-RW DA8AESH XL61 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
random: crng init done
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[251]: Received request to flush runtime journal from PID 1
Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k FS
ccp 0000:00:08.0: 4 command queues available
ccp 0000:00:08.0: enabled
tpm_crb MSFT0101:00: can't request region for resource [mem 0x8e716000-0x8e719fff]
tpm_crb: probe of MSFT0101:00 failed with error -16
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB.PCI0.SMB.SMB0) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
wmi: Mapper loaded
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input9
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2
ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2
usbcore: registered new interface driver btusb
ath10k_pci 0000:02:00.0: qca9377 hw1.0 target 0x05020000 chip_id 0x003820ff sub 17aa:4035
ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.1.0-00267-1 api 5 features ignore-otp crc32 79cea2c7
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x1b
snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 93da0176
media: Linux media interface: v0.10
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Linux video capture interface: v2.00
kvm: disabled by bios
uvcvideo: Found UVC 1.00 device EasyCamera (174f:1173)
EDAC MC: Ver: 3.0.0
uvcvideo 2-1.2:1.0: Entity type for entity Extension 7 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Camera 1 was not initialized!
uvcvideo 2-1.2:1.0: Entity type for entity Extension 4 was not initialized!
input: EasyCamera as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
kvm: disabled by bios
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
ath10k_pci 0000:02:00.0: htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
[drm] probing gen 2 caps for device 1022:1439 = 733c42/6
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff88bf1b4d0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff88bf1b4d0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff88bf1b4d0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff88bf1b4d0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff88bf1b4d0c10
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
audit: type=1400 audit(1498294091.004:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=742 comm="apparmor_parser"
audit: type=1400 audit(1498294091.004:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=742 comm="apparmor_parser"
audit: type=1400 audit(1498294091.004:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1498294091.004:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=745 comm="apparmor_parser"
audit: type=1400 audit(1498294091.108:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=748 comm="apparmor_parser"
audit: type=1400 audit(1498294091.116:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1498294091.116:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1498294091.116:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=747 comm="apparmor_parser"
audit: type=1400 audit(1498294091.116:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=743 comm="apparmor_parser"
audit: type=1400 audit(1498294091.116:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)!
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)!
ath10k_pci 0000:02:00.0: no channel configured; ignoring frame(s)!
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 8c:c7:aa:01:1a:f7
wlp2s0: send auth to 8c:c7:aa:01:1a:f7 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 8c:c7:aa:01:1a:f7 (try 1/3)
wlp2s0: RX AssocResp from 8c:c7:aa:01:1a:f7 (capab=0x411 status=0 aid=3)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11