dmesg - ubuntu-xen-server.05
Linux version 4.10.12-coreos (jenkins@worker-1) (gcc version 4.9.4 (Gentoo Hardened 4.9.4 p1.0, pie-0.6.4) ) #1 SMP Tue Apr 25 22:08:35 UTC 2017
x86/fpu: Legacy x87 FPU detected.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000efffffff] usable
BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000faf7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Xen HVM domU, BIOS 4.7.1-1.2 02/16/2017
Hypervisor detected: Xen
Xen version 4.7.
Xen Platform PCI: I/O protocol version 1
Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
You might have to change the root device
from /dev/hd[a-d] to /dev/xvd[a-d]
in your root= kernel command line option
HVMOP_pagetable_dying not supported
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xfaf800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-combining
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 000F0000000 mask FFFF0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xf0000 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff887380097000] 97000 size 28672
Using GB pages for direct mapping
BRK [0xa55a2a000, 0xa55a2afff] PGTABLE
BRK [0xa55a2b000, 0xa55a2bfff] PGTABLE
BRK [0xa55a2c000, 0xa55a2cfff] PGTABLE
BRK [0xa55a2d000, 0xa55a2dfff] PGTABLE
BRK [0xa55a2e000, 0xa55a2efff] PGTABLE
BRK [0xa55a2f000, 0xa55a2ffff] PGTABLE
BRK [0xa55a30000, 0xa55a30fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000EA020 000024 (v02 Xen )
ACPI: XSDT 0x00000000FC0129F0 000044 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0x00000000FC0123A0 0000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0x00000000FC0042A0 00E075 (v02 Xen HVM 00000000 INTL 20150619)
ACPI: FACS 0x00000000FC004260 000040
ACPI: FACS 0x00000000FC004260 000040
ACPI: APIC 0x00000000FC0124A0 000460 (v02 Xen HVM 00000000 HVML 00000000)
ACPI: HPET 0x00000000FC012980 000038 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: WAET 0x00000000FC0129C0 000028 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000faf7fffff]
NODE_DATA(0) allocated [mem 0xfaf7fa000-0xfaf7fffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000faf7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000efffffff]
node 0: [mem 0x0000000100000000-0x0000000faf7fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000faf7fffff]
On node 0 totalpages: 16381853
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 15296 pages used for memmap
DMA32 zone: 978944 pages, LIFO batch:31
Normal zone: 240608 pages used for memmap
Normal zone: 15398912 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 128 CPUs, 112 hotplug CPUs
e820: [mem 0xf0000000-0xfbffffff] available for PCI devices
Booting paravirtualized kernel on Xen HVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:128 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff8882ee600000 s104792 r8192 d30376 u262144
pcpu-alloc: s104792 r8192 d30376 u262144 alloc=1*2097152
pcpu-alloc: [0] 000 001 002 003 004 005 006 007
pcpu-alloc: [0] 008 009 010 011 012 013 014 015
pcpu-alloc: [0] 016 017 018 019 020 021 022 023
pcpu-alloc: [0] 024 025 026 027 028 029 030 031
pcpu-alloc: [0] 032 033 034 035 036 037 038 039
pcpu-alloc: [0] 040 041 042 043 044 045 046 047
pcpu-alloc: [0] 048 049 050 051 052 053 054 055
pcpu-alloc: [0] 056 057 058 059 060 061 062 063
pcpu-alloc: [0] 064 065 066 067 068 069 070 071
pcpu-alloc: [0] 072 073 074 075 076 077 078 079
pcpu-alloc: [0] 080 081 082 083 084 085 086 087
pcpu-alloc: [0] 088 089 090 091 092 093 094 095
pcpu-alloc: [0] 096 097 098 099 100 101 102 103
pcpu-alloc: [0] 104 105 106 107 108 109 110 111
pcpu-alloc: [0] 112 113 114 115 116 117 118 119
pcpu-alloc: [0] 120 121 122 123 124 125 126 127
xen: PV spinlocks enabled
PV qspinlock hash table entries: 512 (order: 1, 8192 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 16125863
Policy zone: Normal
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 520192 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 1048576 bytes
early log buf free: 253424(96%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 64375096K/65527412K available (6074K kernel code, 1238K rwdata, 2492K rodata, 30796K init, 864K bss, 1152316K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=128.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=128
NR_IRQS:33024 nr_irqs:1856 16
xen:events: Using FIFO-based ABI
xen:events: Xen HVM callback vector for event delivery is enabled
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 30580167144 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.088 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.09 BogoMIPS (lpj=2394046)
pid_max: default: 131072 minimum: 1024
ACPI: Core revision 20160930
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 2 MCE banks
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K
ftrace: allocating 23978 entries in 94 pages
smpboot: Max logical packages: 64
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Xen: using vcpuop timer interface
installing Xen timer for CPU 0
smpboot: CPU0: Intel(R) Xeon(R) CPU E7- 4870 @ 2.40GHz (family: 0x6, model: 0x2f, stepping: 0x2)
cpu 0 spinlock event irq 53
Performance Events: unsupported p6 CPU model 47 no PMU driver, software events only.
NMI watchdog: disabled (cpu0): hardware events not enabled
NMI watchdog: Shutting down hard lockup detector on all cpus
smp: Bringing up secondary CPUs ...
installing Xen timer for CPU 1
x86: Booting SMP configuration:
.... node #0, CPUs: #1
random: fast init done
calibrate_delay_direct() dropping max bogoMips estimate 0 = 4531116
cpu 1 spinlock event irq 59
installing Xen timer for CPU 2
#2
cpu 2 spinlock event irq 65
installing Xen timer for CPU 3
#3
cpu 3 spinlock event irq 71
installing Xen timer for CPU 4
#4
cpu 4 spinlock event irq 77
installing Xen timer for CPU 5
#5
cpu 5 spinlock event irq 83
installing Xen timer for CPU 6
#6
cpu 6 spinlock event irq 89
installing Xen timer for CPU 7
#7
cpu 7 spinlock event irq 95
installing Xen timer for CPU 8
#8
cpu 8 spinlock event irq 101
installing Xen timer for CPU 9
#9
cpu 9 spinlock event irq 107
installing Xen timer for CPU 10
#10
cpu 10 spinlock event irq 113
installing Xen timer for CPU 11
#11
cpu 11 spinlock event irq 119
installing Xen timer for CPU 12
#12
cpu 12 spinlock event irq 125
installing Xen timer for CPU 13
#13
cpu 13 spinlock event irq 131
installing Xen timer for CPU 14
#14
cpu 14 spinlock event irq 137
installing Xen timer for CPU 15
#15
cpu 15 spinlock event irq 143
smp: Brought up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (77121.61 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 32768 (order: 9, 2097152 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
dca service started, version 1.12.1
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
xen: --> pirq=16 -> irq=9 (gsi=9)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
random: crng init done
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
acpiphp: Slot [0] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
pci 0000:00:01.1: reg 0x20: [io 0xc520-0xc52f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
pci 0000:00:01.2: reg 0x20: [io 0xc500-0xc51f]
pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf17fffff pref]
pci 0000:00:03.0: [5853:0001] type 00 class 0x010000
pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:00:03.0: reg 0x14: [mem 0xf0000000-0xf0ffffff pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
ACPI: Enabled 2 GPEs in block 00 to 0F
xen:balloon: Initialising balloon driver
xen_balloon: Initialising balloon driver
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0xfaf800000-0xfafffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 62.500000 MHz counter
clocksource: Switched to clocksource xen
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x08a0-0x08a3] has been reserved
system 00:01: [io 0x0cc0-0x0ccf] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
xen: --> pirq=17 -> irq=8 (gsi=8)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
xen: --> pirq=18 -> irq=12 (gsi=12)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
xen: --> pirq=19 -> irq=1 (gsi=1)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
xen: --> pirq=20 -> irq=6 (gsi=6)
pnp 00:05: [dma 2]
pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
xen: --> pirq=21 -> irq=4 (gsi=4)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
xen: --> pirq=22 -> irq=7 (gsi=7)
pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:08: [io 0x10c0-0x1141] has been reserved
system 00:08: [io 0xb044-0xb047] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
xen: --> pirq=23 -> irq=23 (gsi=23)
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xec000000-0xf0000000] (64MB) mapped at [ffff88746c000000-ffff88746fffffff]
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1493464213.126:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=39 max_order=24 bucket_order=0
SELinux: Registering netfilter hooks
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: does not run on family 6 model 47
GHES: HEST is not enabled!
ioatdma: Intel(R) QuickData Technology Driver 4.00
xen: --> pirq=24 -> irq=30 (gsi=30)
xen:grant_table: Grant tables using version 1 layout
Grant table initialized
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:02: alarms up to one day, 114 bytes nvram, hpet irqs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'CoreOS, Inc: Module signing key for 4.10.12-coreos: d05ffa6d6d2e78d54bb32b20fd5edab9a4559c82'
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
xenbus_probe_frontend: Device with no driver: device/vbd/768
xenbus_probe_frontend: Device with no driver: device/vbd/5696
xenbus_probe_frontend: Device with no driver: device/vbd/832
xenbus_probe_frontend: Device with no driver: device/vif/0
xenbus_probe_frontend: Device with no driver: device/vif/1
xenbus_probe_frontend: Device with no driver: device/vif/2
xenbus_probe_frontend: Device with no driver: device/vif/3
rtc_cmos 00:02: setting system clock to 2017-04-29 11:10:14 UTC (1493464214)
Freeing unused kernel memory: 30796K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 56K
Freeing unused kernel memory: 1604K
Unable to open file: /etc/ima/ima-policy (-2)
IMA: policy update failed
audit: type=1802 audit(1493464214.643:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel op="policy_update" cause="failed" comm="systemd" res=0
systemd[1]: Failed to insert module 'ip_tables': Function not implemented
systemd[1]: systemd 233 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS -ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN default-hierarchy=legacy)
systemd[1]: Detected virtualization xen.
tsc: Refined TSC clocksource calibration: 2394.001 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821470ef4, max_idle_ns: 440795283622 ns
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
audit: type=1130 audit(1493464215.079:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464215.111:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464215.152:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464215.185:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
audit: type=1130 audit(1493464215.263:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464215.324:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464215.370:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464215.431:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-networkd comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xen_netfront: Initialising Xen virtual ethernet driver
ata_piix 0000:00:01.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc520 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc528 irq 15
ehci-pci: EHCI PCI platform driver
SSE version of gcm_enc/dec engaged.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: detected 2 ports
uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c500
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
xen_netfront: can't alloc rx grant refs
net eth1: only created 15 queues
xen_netfront: can't alloc rx grant refs
net eth2: only created 0 queues
net eth2: no queues
vif vif-2: 22 creating queues
xen_netfront: can't alloc rx grant refs
net eth3: only created 0 queues
net eth3: no queues
vif vif-3: 22 creating queues
ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
ata2.01: configured for MWDMA2
scsi 1:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
sr 1:0:1:0: [sr0] scsi3-mmc drive: 4x/4x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
blkfront: xvda: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:9289727 != 136314879
GPT:Alternate GPT header not at the end of the disk.
GPT:9289727 != 136314879
GPT: Use GNU Parted to correct GPT errors.
xvda: xvda1 xvda2 xvda3 xvda4 xvda6 xvda7 xvda9
blkfront: xvdb: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
usb 1-2: new full-speed USB device number 2 using uhci_hcd
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/0003:0627:0001.0001/input/input2
hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
xvda: xvda1 xvda2 xvda3 xvda4 xvda6 xvda7 xvda9
EXT4-fs (xvda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
kauditd_printk_skb: 29 callbacks suppressed
audit: type=1130 audit(1493464218.700:40): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464218.700:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464218.824:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-resolved comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464218.824:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-resolved comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464218.884:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=sysroot-boot comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464218.949:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464218.949:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464219.038:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-networkd comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464219.038:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-networkd comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464219.109:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[232]: Received SIGTERM from PID 1 (n/a).
systemd: 17 output lines suppressed due to ratelimiting
SELinux: 4096 avtab hash slots, 13428 rules.
SELinux: 4096 avtab hash slots, 13428 rules.
SELinux: 6 users, 6 roles, 1327 types, 55 bools, 1 sens, 1024 cats
SELinux: 92 classes, 13428 rules
SELinux: Permission validate_trans in class security not defined in policy.
SELinux: Permission module_load in class system not defined in policy.
SELinux: Class cap_userns not defined in policy.
SELinux: Class cap2_userns not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 232.986ms.
Unable to open file: /etc/ima/ima-policy (-2)
IMA: policy update failed
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Relabelled /dev and /run in 9.333ms.
systemd-journald[765]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
ACPI: Sleep Button [SLPF]
piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
mousedev: PS/2 mouse device common for all mice
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
EXT4-fs (xvda6): mounted filesystem with ordered data mode. Opts: commit=600
kauditd_printk_skb: 43 callbacks suppressed
audit: type=1130 audit(1493464226.046:93): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464226.289:94): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464226.289:95): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=lvm2-activation-early comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464226.389:96): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464226.389:97): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=lvm2-activation comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464226.579:98): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=systemd-journal-catalog-update comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
audit: type=1130 audit(1493464226.910:99): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1127 audit(1493464226.969:100): pid=956 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg=' comm="systemd-update-utmp" exe="/usr/lib64/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1493464227.018:101): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=clean-ca-certificates comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1493464227.018:102): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s0 msg='unit=clean-ca-certificates comm="systemd" exe="/usr/lib64/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (xvda9): resizing filesystem from 553472 to 16432123 blocks
EXT4-fs (xvda9): resized filesystem to 16432123
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
docker0: port 1(veth49e0b58) entered blocking state
docker0: port 1(veth49e0b58) entered disabled state
device veth49e0b58 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth49e0b58: link is not ready
eth0: renamed from veth3ac195d
IPv6: ADDRCONF(NETDEV_CHANGE): veth49e0b58: link becomes ready
docker0: port 1(veth49e0b58) entered blocking state
docker0: port 1(veth49e0b58) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 2(veth694e477) entered blocking state
docker0: port 2(veth694e477) entered disabled state
device veth694e477 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth694e477: link is not ready
eth0: renamed from vethc33af90
IPv6: ADDRCONF(NETDEV_CHANGE): veth694e477: link becomes ready
docker0: port 2(veth694e477) entered blocking state
docker0: port 2(veth694e477) entered forwarding state
vethc33af90: renamed from eth0
docker0: port 2(veth694e477) entered disabled state
docker0: port 2(veth694e477) entered disabled state
device veth694e477 left promiscuous mode
docker0: port 2(veth694e477) entered disabled state
veth3ac195d: renamed from eth0
docker0: port 1(veth49e0b58) entered disabled state
docker0: port 1(veth49e0b58) entered disabled state
device veth49e0b58 left promiscuous mode
docker0: port 1(veth49e0b58) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
docker0: port 1(vethe42b273) entered blocking state
docker0: port 1(vethe42b273) entered disabled state
device vethe42b273 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethe42b273: link is not ready
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
eth0: renamed from veth6ae71bf
IPv6: ADDRCONF(NETDEV_CHANGE): vethe42b273: link becomes ready
docker0: port 1(vethe42b273) entered blocking state
docker0: port 1(vethe42b273) entered forwarding state
Netfilter messages via NETLINK v0.30.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 2(veth00ec8e97) entered blocking state
docker0: port 2(veth00ec8e97) entered disabled state
device veth00ec8e97 entered promiscuous mode
docker0: port 2(veth00ec8e97) entered blocking state
docker0: port 2(veth00ec8e97) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 3(veth22b46782) entered blocking state
docker0: port 3(veth22b46782) entered disabled state
device veth22b46782 entered promiscuous mode
docker0: port 3(veth22b46782) entered blocking state
docker0: port 3(veth22b46782) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
docker0: port 4(veth92a313fd) entered blocking state
docker0: port 4(veth92a313fd) entered disabled state
device veth92a313fd entered promiscuous mode
docker0: port 4(veth92a313fd) entered blocking state
docker0: port 4(veth92a313fd) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
alg: No test for seqiv(rfc4106(gcm(aes))) (seqiv(rfc4106-gcm-aesni))
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(veth9b512fb6) entered blocking state
docker0: port 5(veth9b512fb6) entered disabled state
device veth9b512fb6 entered promiscuous mode
docker0: port 5(veth9b512fb6) entered blocking state
docker0: port 5(veth9b512fb6) entered forwarding state
docker0: port 5(veth9b512fb6) entered disabled state
device veth9b512fb6 left promiscuous mode
docker0: port 5(veth9b512fb6) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(vethe3fe511e) entered blocking state
docker0: port 5(vethe3fe511e) entered disabled state
device vethe3fe511e entered promiscuous mode
docker0: port 5(vethe3fe511e) entered blocking state
docker0: port 5(vethe3fe511e) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 6(veth6cd95dad) entered blocking state
docker0: port 6(veth6cd95dad) entered disabled state
device veth6cd95dad entered promiscuous mode
docker0: port 6(veth6cd95dad) entered blocking state
docker0: port 6(veth6cd95dad) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 7(vethe9fd2627) entered blocking state
docker0: port 7(vethe9fd2627) entered disabled state
device vethe9fd2627 entered promiscuous mode
docker0: port 7(vethe9fd2627) entered blocking state
docker0: port 7(vethe9fd2627) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 8(vethe89d7f5c) entered blocking state
docker0: port 8(vethe89d7f5c) entered disabled state
device vethe89d7f5c entered promiscuous mode
docker0: port 8(vethe89d7f5c) entered blocking state
docker0: port 8(vethe89d7f5c) entered forwarding state
docker0: port 8(vethe89d7f5c) entered disabled state
device vethe89d7f5c left promiscuous mode
docker0: port 8(vethe89d7f5c) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 8(veth44e02044) entered blocking state
docker0: port 8(veth44e02044) entered disabled state
device veth44e02044 entered promiscuous mode
docker0: port 8(veth44e02044) entered blocking state
docker0: port 8(veth44e02044) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 9(vethcf001fb3) entered blocking state
docker0: port 9(vethcf001fb3) entered disabled state
device vethcf001fb3 entered promiscuous mode
docker0: port 9(vethcf001fb3) entered blocking state
docker0: port 9(vethcf001fb3) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 10(vethc0850808) entered blocking state
docker0: port 10(vethc0850808) entered disabled state
device vethc0850808 entered promiscuous mode
docker0: port 10(vethc0850808) entered blocking state
docker0: port 10(vethc0850808) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 11(veth8fc8d1f9) entered blocking state
docker0: port 11(veth8fc8d1f9) entered disabled state
device veth8fc8d1f9 entered promiscuous mode
docker0: port 11(veth8fc8d1f9) entered blocking state
docker0: port 11(veth8fc8d1f9) entered forwarding state
docker0: port 12(veth012f15a5) entered blocking state
docker0: port 12(veth012f15a5) entered disabled state
device veth012f15a5 entered promiscuous mode
docker0: port 12(veth012f15a5) entered blocking state
docker0: port 12(veth012f15a5) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 13(veth72a8a232) entered blocking state
docker0: port 13(veth72a8a232) entered disabled state
device veth72a8a232 entered promiscuous mode
docker0: port 13(veth72a8a232) entered blocking state
docker0: port 13(veth72a8a232) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 14(vethe68fec83) entered blocking state
docker0: port 14(vethe68fec83) entered disabled state
device vethe68fec83 entered promiscuous mode
docker0: port 14(vethe68fec83) entered blocking state
docker0: port 14(vethe68fec83) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
docker0: port 15(veth7c489d92) entered blocking state
docker0: port 15(veth7c489d92) entered disabled state
device veth7c489d92 entered promiscuous mode
docker0: port 15(veth7c489d92) entered blocking state
docker0: port 15(veth7c489d92) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 16(veth5d2c4696) entered blocking state
docker0: port 16(veth5d2c4696) entered disabled state
device veth5d2c4696 entered promiscuous mode
docker0: port 16(veth5d2c4696) entered blocking state
docker0: port 16(veth5d2c4696) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 17(veth1cc6eabd) entered blocking state
docker0: port 17(veth1cc6eabd) entered disabled state
device veth1cc6eabd entered promiscuous mode
docker0: port 17(veth1cc6eabd) entered blocking state
docker0: port 17(veth1cc6eabd) entered forwarding state
docker0: port 16(veth5d2c4696) entered disabled state
device veth5d2c4696 left promiscuous mode
docker0: port 16(veth5d2c4696) entered disabled state
docker0: port 13(veth72a8a232) entered disabled state
device veth72a8a232 left promiscuous mode
docker0: port 13(veth72a8a232) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
docker0: port 7(vethe9fd2627) entered disabled state
docker0: port 6(veth6cd95dad) entered disabled state
device vethe9fd2627 left promiscuous mode
docker0: port 7(vethe9fd2627) entered disabled state
device veth6cd95dad left promiscuous mode
docker0: port 6(veth6cd95dad) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 6(vetheac8dd39) entered blocking state
docker0: port 6(vetheac8dd39) entered disabled state
device vetheac8dd39 entered promiscuous mode
docker0: port 6(vetheac8dd39) entered blocking state
docker0: port 6(vetheac8dd39) entered forwarding state
docker0: port 6(vetheac8dd39) entered disabled state
device vetheac8dd39 left promiscuous mode
docker0: port 6(vetheac8dd39) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 6(veth5c9aa029) entered blocking state
docker0: port 6(veth5c9aa029) entered disabled state
device veth5c9aa029 entered promiscuous mode
docker0: port 6(veth5c9aa029) entered blocking state
docker0: port 6(veth5c9aa029) entered forwarding state
docker0: port 6(veth5c9aa029) entered disabled state
device veth5c9aa029 left promiscuous mode
docker0: port 6(veth5c9aa029) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 6(vethd3420d46) entered blocking state
docker0: port 6(vethd3420d46) entered disabled state
device vethd3420d46 entered promiscuous mode
docker0: port 6(vethd3420d46) entered blocking state
docker0: port 6(vethd3420d46) entered forwarding state
docker0: port 15(veth7c489d92) entered disabled state
device veth7c489d92 left promiscuous mode
docker0: port 15(veth7c489d92) entered disabled state
docker0: port 5(vethe3fe511e) entered disabled state
device vethe3fe511e left promiscuous mode
docker0: port 5(vethe3fe511e) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(veth2034005a) entered blocking state
docker0: port 5(veth2034005a) entered disabled state
device veth2034005a entered promiscuous mode
docker0: port 5(veth2034005a) entered blocking state
docker0: port 5(veth2034005a) entered forwarding state
docker0: port 12(veth012f15a5) entered disabled state
docker0: port 5(veth2034005a) entered disabled state
device veth012f15a5 left promiscuous mode
docker0: port 12(veth012f15a5) entered disabled state
device veth2034005a left promiscuous mode
docker0: port 5(veth2034005a) entered disabled state
docker0: port 11(veth8fc8d1f9) entered disabled state
device veth8fc8d1f9 left promiscuous mode
docker0: port 11(veth8fc8d1f9) entered disabled state
docker0: port 17(veth1cc6eabd) entered disabled state
device veth1cc6eabd left promiscuous mode
docker0: port 17(veth1cc6eabd) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(veth0382cba4) entered blocking state
docker0: port 5(veth0382cba4) entered disabled state
device veth0382cba4 entered promiscuous mode
docker0: port 5(veth0382cba4) entered blocking state
docker0: port 5(veth0382cba4) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 7(veth5b8d609a) entered blocking state
docker0: port 7(veth5b8d609a) entered disabled state
device veth5b8d609a entered promiscuous mode
docker0: port 7(veth5b8d609a) entered blocking state
docker0: port 7(veth5b8d609a) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 11(veth0648821e) entered blocking state
docker0: port 11(veth0648821e) entered disabled state
device veth0648821e entered promiscuous mode
docker0: port 11(veth0648821e) entered blocking state
docker0: port 11(veth0648821e) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
docker0: port 12(veth005a1d91) entered blocking state
docker0: port 12(veth005a1d91) entered disabled state
device veth005a1d91 entered promiscuous mode
docker0: port 12(veth005a1d91) entered blocking state
docker0: port 12(veth005a1d91) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 13(veth4d23080e) entered blocking state
docker0: port 13(veth4d23080e) entered disabled state
device veth4d23080e entered promiscuous mode
docker0: port 13(veth4d23080e) entered blocking state
docker0: port 13(veth4d23080e) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 15(vethfe664ef2) entered blocking state
docker0: port 15(vethfe664ef2) entered disabled state
device vethfe664ef2 entered promiscuous mode
docker0: port 15(vethfe664ef2) entered blocking state
docker0: port 15(vethfe664ef2) entered forwarding state
docker0: port 10(vethc0850808) entered disabled state
device vethc0850808 left promiscuous mode
docker0: port 10(vethc0850808) entered disabled state
blkfront: xvdc: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
blkfront: xvdc: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
blkfront: xvdc: barrier: enabled; persistent grants: disabled; indirect descriptors: disabled;
docker0: port 11(veth0648821e) entered disabled state
device veth0648821e left promiscuous mode
docker0: port 11(veth0648821e) entered disabled state
docker0: port 12(veth005a1d91) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
device veth005a1d91 left promiscuous mode
docker0: port 12(veth005a1d91) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 10(veth4a1a5142) entered blocking state
docker0: port 10(veth4a1a5142) entered disabled state
device veth4a1a5142 entered promiscuous mode
docker0: port 10(veth4a1a5142) entered blocking state
docker0: port 10(veth4a1a5142) entered forwarding state
docker0: port 10(veth4a1a5142) entered disabled state
docker0: port 13(veth4d23080e) entered disabled state
device veth4a1a5142 left promiscuous mode
docker0: port 10(veth4a1a5142) entered disabled state
device veth4d23080e left promiscuous mode
docker0: port 13(veth4d23080e) entered disabled state
docker0: port 5(veth0382cba4) entered disabled state
device veth0382cba4 left promiscuous mode
docker0: port 5(veth0382cba4) entered disabled state
docker0: port 15(vethfe664ef2) entered disabled state
device vethfe664ef2 left promiscuous mode
docker0: port 15(vethfe664ef2) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
docker0: port 5(veth63a8e4ad) entered blocking state
docker0: port 5(veth63a8e4ad) entered disabled state
device veth63a8e4ad entered promiscuous mode
docker0: port 5(veth63a8e4ad) entered blocking state
docker0: port 5(veth63a8e4ad) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 10(vethe793dc2a) entered blocking state
docker0: port 10(vethe793dc2a) entered disabled state
device vethe793dc2a entered promiscuous mode
docker0: port 10(vethe793dc2a) entered blocking state
docker0: port 10(vethe793dc2a) entered forwarding state
docker0: port 11(veth3c561cae) entered blocking state
docker0: port 11(veth3c561cae) entered disabled state
device veth3c561cae entered promiscuous mode
docker0: port 11(veth3c561cae) entered blocking state
docker0: port 11(veth3c561cae) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 12(vethcaeb30ba) entered blocking state
docker0: port 12(vethcaeb30ba) entered disabled state
device vethcaeb30ba entered promiscuous mode
docker0: port 12(vethcaeb30ba) entered blocking state
docker0: port 12(vethcaeb30ba) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 13(veth38d3d01d) entered blocking state
docker0: port 13(veth38d3d01d) entered disabled state
device veth38d3d01d entered promiscuous mode
docker0: port 13(veth38d3d01d) entered blocking state
docker0: port 13(veth38d3d01d) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 15(vethd4befd4a) entered blocking state
docker0: port 15(vethd4befd4a) entered disabled state
device vethd4befd4a entered promiscuous mode
docker0: port 15(vethd4befd4a) entered blocking state
docker0: port 15(vethd4befd4a) entered forwarding state
docker0: port 11(veth3c561cae) entered disabled state
device veth3c561cae left promiscuous mode
docker0: port 11(veth3c561cae) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
docker0: port 13(veth38d3d01d) entered disabled state
docker0: port 12(vethcaeb30ba) entered disabled state
device veth38d3d01d left promiscuous mode
docker0: port 13(veth38d3d01d) entered disabled state
device vethcaeb30ba left promiscuous mode
docker0: port 12(vethcaeb30ba) entered disabled state
docker0: port 10(vethe793dc2a) entered disabled state
device vethe793dc2a left promiscuous mode
docker0: port 10(vethe793dc2a) entered disabled state
docker0: port 5(veth63a8e4ad) entered disabled state
device veth63a8e4ad left promiscuous mode
docker0: port 5(veth63a8e4ad) entered disabled state
docker0: port 15(vethd4befd4a) entered disabled state
device vethd4befd4a left promiscuous mode
docker0: port 15(vethd4befd4a) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(veth41afe22c) entered blocking state
docker0: port 5(veth41afe22c) entered disabled state
device veth41afe22c entered promiscuous mode
docker0: port 5(veth41afe22c) entered blocking state
docker0: port 5(veth41afe22c) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
docker0: port 10(vethfbfaec34) entered blocking state
docker0: port 10(vethfbfaec34) entered disabled state
device vethfbfaec34 entered promiscuous mode
docker0: port 10(vethfbfaec34) entered blocking state
docker0: port 10(vethfbfaec34) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 11(veth82376b35) entered blocking state
docker0: port 11(veth82376b35) entered disabled state
device veth82376b35 entered promiscuous mode
docker0: port 11(veth82376b35) entered blocking state
docker0: port 11(veth82376b35) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 12(vethff27422c) entered blocking state
docker0: port 12(vethff27422c) entered disabled state
device vethff27422c entered promiscuous mode
docker0: port 12(vethff27422c) entered blocking state
docker0: port 12(vethff27422c) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 13(vethba4901f0) entered blocking state
docker0: port 13(vethba4901f0) entered disabled state
device vethba4901f0 entered promiscuous mode
docker0: port 13(vethba4901f0) entered blocking state
docker0: port 13(vethba4901f0) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 15(vethd1aeaba8) entered blocking state
docker0: port 15(vethd1aeaba8) entered disabled state
device vethd1aeaba8 entered promiscuous mode
docker0: port 15(vethd1aeaba8) entered blocking state
docker0: port 15(vethd1aeaba8) entered forwarding state
docker0: port 15(vethd1aeaba8) entered disabled state
device vethd1aeaba8 left promiscuous mode
docker0: port 15(vethd1aeaba8) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 15(veth6335a941) entered blocking state
docker0: port 15(veth6335a941) entered disabled state
device veth6335a941 entered promiscuous mode
docker0: port 15(veth6335a941) entered blocking state
docker0: port 15(veth6335a941) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
docker0: port 15(veth6335a941) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
docker0: port 5(veth41afe22c) entered disabled state
device veth6335a941 left promiscuous mode
docker0: port 15(veth6335a941) entered disabled state
device veth41afe22c left promiscuous mode
docker0: port 5(veth41afe22c) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
docker0: port 12(vethff27422c) entered disabled state
device vethff27422c left promiscuous mode
docker0: port 12(vethff27422c) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(vethc1c12274) entered blocking state
docker0: port 5(vethc1c12274) entered disabled state
device vethc1c12274 entered promiscuous mode
docker0: port 5(vethc1c12274) entered blocking state
docker0: port 5(vethc1c12274) entered forwarding state
docker0: port 5(vethc1c12274) entered disabled state
device vethc1c12274 left promiscuous mode
docker0: port 5(vethc1c12274) entered disabled state
docker0: port 11(veth82376b35) entered disabled state
device veth82376b35 left promiscuous mode
docker0: port 11(veth82376b35) entered disabled state
docker0: port 13(vethba4901f0) entered disabled state
device vethba4901f0 left promiscuous mode
docker0: port 13(vethba4901f0) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 5(veth0bd9ebbf) entered blocking state
docker0: port 5(veth0bd9ebbf) entered disabled state
device veth0bd9ebbf entered promiscuous mode
docker0: port 5(veth0bd9ebbf) entered blocking state
docker0: port 5(veth0bd9ebbf) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 11(vethac8070bf) entered blocking state
docker0: port 11(vethac8070bf) entered disabled state
device vethac8070bf entered promiscuous mode
docker0: port 11(vethac8070bf) entered blocking state
docker0: port 11(vethac8070bf) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 12(vethcdb71f57) entered blocking state
docker0: port 12(vethcdb71f57) entered disabled state
device vethcdb71f57 entered promiscuous mode
docker0: port 12(vethcdb71f57) entered blocking state
docker0: port 12(vethcdb71f57) entered forwarding state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 13(veth182b2674) entered blocking state
docker0: port 13(veth182b2674) entered disabled state
device veth182b2674 entered promiscuous mode
docker0: port 13(veth182b2674) entered blocking state
docker0: port 13(veth182b2674) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 15(veth23c1c8e3) entered blocking state
docker0: port 15(veth23c1c8e3) entered disabled state
device veth23c1c8e3 entered promiscuous mode
docker0: port 15(veth23c1c8e3) entered blocking state
docker0: port 15(veth23c1c8e3) entered forwarding state
docker0: port 10(vethfbfaec34) entered disabled state
device vethfbfaec34 left promiscuous mode
docker0: port 10(vethfbfaec34) entered disabled state
docker0: port 10(veth0bcd04f) entered blocking state
docker0: port 10(veth0bcd04f) entered disabled state
device veth0bcd04f entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth0bcd04f: link is not ready
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
eth0: renamed from vetha16487f
IPv6: ADDRCONF(NETDEV_CHANGE): veth0bcd04f: link becomes ready
docker0: port 10(veth0bcd04f) entered blocking state
docker0: port 10(veth0bcd04f) entered forwarding state
docker0: port 10(veth0bcd04f) entered disabled state
vetha16487f: renamed from eth0
docker0: port 10(veth0bcd04f) entered disabled state
device veth0bcd04f left promiscuous mode
docker0: port 10(veth0bcd04f) entered disabled state
SELinux: mount invalid. Same superblock, different security settings for (dev mqueue, type mqueue)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
docker0: port 10(veth62be00ca) entered blocking state
docker0: port 10(veth62be00ca) entered disabled state
device veth62be00ca entered promiscuous mode
docker0: port 10(veth62be00ca) entered blocking state
docker0: port 10(veth62be00ca) entered forwarding state