dmesg - cfq-4.10.12
Linux version 4.10.12-bfq (root@ictm68) (gcc version 5.4.0 (GCC) ) #1 SMP Thu Apr 27 08:15:41 WIB 2017
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000004efff] usable
BIOS-e820: [mem 0x000000000004f000-0x000000000004ffff] reserved
BIOS-e820: [mem 0x0000000000050000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c036ffff] usable
BIOS-e820: [mem 0x00000000c0370000-0x00000000c0376fff] ACPI NVS
BIOS-e820: [mem 0x00000000c0377000-0x00000000c0d44fff] usable
BIOS-e820: [mem 0x00000000c0d45000-0x00000000c121dfff] reserved
BIOS-e820: [mem 0x00000000c121e000-0x00000000c7db3fff] usable
BIOS-e820: [mem 0x00000000c7db4000-0x00000000c7ffffff] reserved
BIOS-e820: [mem 0x00000000c8000000-0x00000000c875afff] usable
BIOS-e820: [mem 0x00000000c875b000-0x00000000c87fffff] type 20
BIOS-e820: [mem 0x00000000c8800000-0x00000000c8f9cfff] usable
BIOS-e820: [mem 0x00000000c8f9d000-0x00000000c8ffffff] ACPI data
BIOS-e820: [mem 0x00000000c9000000-0x00000000ca6e4fff] usable
BIOS-e820: [mem 0x00000000ca6e5000-0x00000000ca7fffff] ACPI NVS
BIOS-e820: [mem 0x00000000ca800000-0x00000000cbcdcfff] usable
BIOS-e820: [mem 0x00000000cbcdd000-0x00000000cbffffff] reserved
BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042edfffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI 2.0=0xc8fd2000 ACPI=0xc8fd2000 SMBIOS=0xf04c0 MPS=0xfd710
SMBIOS 2.7 present.
DMI: Dell Inc. Precision M6800/0VCHYK, BIOS A18 12/22/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x42ee00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF0000000 write-back
3 base 00E0000000 mask 7FE0000000 uncachable
4 base 00D0000000 mask 7FF0000000 uncachable
5 base 00CE000000 mask 7FFE000000 uncachable
6 base 00CD000000 mask 7FFF000000 uncachable
7 base 042F000000 mask 7FFF000000 uncachable
8 base 042EE00000 mask 7FFFE00000 uncachable
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcbcdd max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fda90-0x000fda9f] mapped at [ffff8966c00fda90]
Base memory trampoline at [ffff8966c0097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x323043000, 0x323043fff] PGTABLE
BRK [0x323044000, 0x323044fff] PGTABLE
BRK [0x323045000, 0x323045fff] PGTABLE
BRK [0x323046000, 0x323046fff] PGTABLE
BRK [0x323047000, 0x323047fff] PGTABLE
BRK [0x323048000, 0x323048fff] PGTABLE
BRK [0x323049000, 0x323049fff] PGTABLE
BRK [0x32304a000, 0x32304afff] PGTABLE
BRK [0x32304b000, 0x32304bfff] PGTABLE
BRK [0x32304c000, 0x32304cfff] PGTABLE
BRK [0x32304d000, 0x32304dfff] PGTABLE
BRK [0x32304e000, 0x32304efff] PGTABLE
RAMDISK: [mem 0x36c1f000-0x37606fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000C8FD2000 000024 (v02 DELL )
ACPI: XSDT 0x00000000C8FD2098 0000AC (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 0x00000000C8FE4080 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI: DSDT 0x00000000C8FD21D0 011EB0 (v02 DELL CBX3 00000014 INTL 20120711)
ACPI: FACS 0x00000000CA7FE080 000040
ACPI: APIC 0x00000000C8FE4190 000092 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 0x00000000C8FE4228 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: SLIC 0x00000000C8FE4270 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
ACPI: LPIT 0x00000000C8FE43E8 00005C (v01 DELL CBX3 00000000 AMI. 00000005)
ACPI: SSDT 0x00000000C8FE4448 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE4670 000160 (v01 Intel zpodd 00001000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE47D0 00051F (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE4CF0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: HPET 0x00000000C8FE57C8 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000C8FE5800 000447 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: MCFG 0x00000000C8FE5C48 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: ASF! 0x00000000C8FE5C88 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x00000000C8FE5D30 000038 (v00 \xfffffff3\xffffffee 01072009 AMI 00010013)
ACPI: DMAR 0x00000000C8FE5D68 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: SSDT 0x00000000C8FE5E20 0010BD (v01 SgRef SgPeg 00001000 INTL 20120711)
ACPI: SSDT 0x00000000C8FE6EE0 0010BA (v01 AmdRef AmdTabl 00001000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042edfffff]
NODE_DATA(0) allocated [mem 0x42edd4000-0x42edfdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042edfffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000004efff]
node 0: [mem 0x0000000000050000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000c036ffff]
node 0: [mem 0x00000000c0377000-0x00000000c0d44fff]
node 0: [mem 0x00000000c121e000-0x00000000c7db3fff]
node 0: [mem 0x00000000c8000000-0x00000000c875afff]
node 0: [mem 0x00000000c8800000-0x00000000c8f9cfff]
node 0: [mem 0x00000000c9000000-0x00000000ca6e4fff]
node 0: [mem 0x00000000ca800000-0x00000000cbcdcfff]
node 0: [mem 0x0000000100000000-0x000000042edfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042edfffff]
On node 0 totalpages: 4170027
DMA zone: 64 pages used for memmap
DMA zone: 27 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 12943 pages used for memmap
DMA32 zone: 828302 pages, LIFO batch:31
Normal zone: 52152 pages used for memmap
Normal zone: 3337728 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000cd200000-0x00000000cf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0004f000-0x0004ffff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc0370000-0xc0376fff]
PM: Registered nosave memory: [mem 0xc0d45000-0xc121dfff]
PM: Registered nosave memory: [mem 0xc7db4000-0xc7ffffff]
PM: Registered nosave memory: [mem 0xc875b000-0xc87fffff]
PM: Registered nosave memory: [mem 0xc8f9d000-0xc8ffffff]
PM: Registered nosave memory: [mem 0xca6e5000-0xca7fffff]
PM: Registered nosave memory: [mem 0xcbcdd000-0xcbffffff]
PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff896aeea00000 s100504 r8192 d30568 u262144
pcpu-alloc: s100504 r8192 d30568 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4104841
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 5238012K/16680108K available (7239K kernel code, 1158K rwdata, 2980K rodata, 1828K init, 1332K bss, 468892K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:524544 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3192.770 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.54 BogoMIPS (lpj=3192770)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 32K
ftrace: allocating 28492 entries in 112 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
DMAR: RMRR base: 0x000000c7f19000 end: 0x000000c7f27fff
DMAR: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4930MX CPU @ 3.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
smp: Brought up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (51109.22 BogoMIPS)
node 0 initialised, 2743301 pages in 31ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xc0370000-0xc0376fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xca6e5000-0xca7fffff] (1159168 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
xor: automatically using best checksumming function avx
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1 gen() 11863 MB/s
raid6: sse2x1 xor() 8951 MB/s
raid6: sse2x2 gen() 14878 MB/s
raid6: sse2x2 xor() 10005 MB/s
raid6: sse2x4 gen() 17500 MB/s
raid6: sse2x4 xor() 11529 MB/s
raid6: avx2x1 gen() 23261 MB/s
raid6: avx2x1 xor() 17974 MB/s
raid6: avx2x2 gen() 26933 MB/s
raid6: avx2x2 xor() 19179 MB/s
raid6: avx2x4 gen() 31707 MB/s
raid6: avx2x4 xor() 20703 MB/s
raid6: using algorithm avx2x4 gen() 31707 MB/s
raid6: .... xor() 20703 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8969E31CA400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8969E31A1800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8969E3199200 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf5800000-0xf5bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7d40000-0xf7d4000f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7d3d000-0xf7d3dfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7d3a000-0xf7d3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7d39000-0xf7d390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [1002:6640] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x24: [mem 0xf7c00000-0xf7c3ffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7c40000-0xf7c5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aac0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7c60000-0xf7c63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:01:00.1: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:422b] type 00 class 0x028000
pci 0000:03:00.0: reg 0x10: [mem 0xf7b00000-0xf7b01fff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-07]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf79fffff]
pci 0000:00:1c.3: bridge window [mem 0xf1d00000-0xf26fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf6600000-0xf6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xf1300000-0xf1cfffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.6: PCI bridge to [bus 09-10]
pci 0000:00:1c.6: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf5c00000-0xf65fffff]
pci 0000:00:1c.6: bridge window [mem 0xf0900000-0xf12fffff 64bit pref]
pci 0000:11:00.0: [1217:8520] type 00 class 0x080501
pci 0000:11:00.0: reg 0x10: [mem 0xf7a01000-0xf7a01fff]
pci 0000:11:00.0: reg 0x14: [mem 0xf7a00000-0xf7a007ff]
pci 0000:11:00.0: PME# supported from D3hot D3cold
pci 0000:11:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 11]
pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x10, EC_CMD/EC_SC=0x934, EC_DATA=0x930
ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:00:02.0: vgaarb: no bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xc0370000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc0d45000-0xc3ffffff]
e820: reserve RAM buffer [mem 0xc7db4000-0xc7ffffff]
e820: reserve RAM buffer [mem 0xc875b000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc8f9d000-0xcbffffff]
e820: reserve RAM buffer [mem 0xca6e5000-0xcbffffff]
e820: reserve RAM buffer [mem 0xcbcdd000-0xcbffffff]
e820: reserve RAM buffer [mem 0x42ee00000-0x42fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs DLL05cd PNP0f13 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.3: PCI bridge to [bus 04-07]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf79fffff]
pci 0000:00:1c.3: bridge window [mem 0xf1d00000-0xf26fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xf6600000-0xf6ffffff]
pci 0000:00:1c.4: bridge window [mem 0xf1300000-0xf1cfffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 09-10]
pci 0000:00:1c.6: bridge window [io 0xa000-0xbfff]
pci 0000:00:1c.6: bridge window [mem 0xf5c00000-0xf65fffff]
pci 0000:00:1c.6: bridge window [mem 0xf0900000-0xf12fffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 11]
pci 0000:00:1c.7: bridge window [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xcf200000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf79fffff]
pci_bus 0000:04: resource 2 [mem 0xf1d00000-0xf26fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xf6600000-0xf6ffffff]
pci_bus 0000:08: resource 2 [mem 0xf1300000-0xf1cfffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0xa000-0xbfff]
pci_bus 0000:09: resource 1 [mem 0xf5c00000-0xf65fffff]
pci_bus 0000:09: resource 2 [mem 0xf0900000-0xf12fffff 64bit pref]
pci_bus 0000:11: resource 1 [mem 0xf7a00000-0xf7afffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 10144K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9240000-0xbd240000] (64MB) mapped at [ffff896779240000-ffff89677d23ffff]
simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x57f000 bytes, mapped to 0xffffa04282000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1600x900x32, linelength=6400
Console: switching to colour frame buffer device 200x56
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1493258233.868:1): initialized
workingset: timestamp_bits=36 max_order=22 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r10 (with cgroups support)
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
brd: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a280 irq 27
ata5: DUMMY
ata6: DUMMY
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
intel_pstate: Intel P-state driver initializing
Initializing XFRM netlink socket
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x306c3, pf=0x10, revision=0x1c
microcode: Microcode Update Driver: v2.2.
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD7500BPKX-75HPJT0, 01.01A01, max UDMA/133
ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD7500BPKX-7 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5HH, SD12, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5HH SD12 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
tsc: Refined TSC clocksource calibration: 3192.624 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0511f27f6, max_idle_ns: 440795241184 ns
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1828K
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 932K
Freeing unused kernel memory: 1116K
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
random: udevd: uninitialized urandom read (16 bytes read)
udevd[248]: RUN{builtin}: 'uaccess' unknown /lib/udev/rules.d/73-seat-late.rules:15
udevd[249]: starting eudev-3.2.2
random: udevd: uninitialized urandom read (16 bytes read)
SGI XFS with ACLs, security attributes, no debug enabled
Linux agpgart interface v0.103
[drm] Initialized
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 57f000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from simple
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:50/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
clocksource: Switched to clocksource tsc
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
PM: Starting manual resume from disk
XFS (sda3): Mounting V4 Filesystem
XFS (sda3): Ending clean mount
random: fast init done
random: crng init done
loop: module loaded
udevd[690]: RUN{builtin}: 'uaccess' unknown /lib/udev/rules.d/73-seat-late.rules:15
udevd[692]: starting eudev-3.2.2
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (on-line)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery absent)
hidraw: raw HID events driver (C) Jiri Kosina
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
parport_pc 00:07: [io 0x0378-0x037b]
parport_pc 00:07: [io 0x0278-0x027b]
parport_pc 00:07: [io 0x03bc-0x03bf]
parport_pc 00:07: [io 0x0378-0x037b]
parport_pc 00:07: [irq 7]
parport_pc 00:07: activated
parport_pc 00:07: reported by Plug and Play ACPI
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
i2c /dev entries driver
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:03:00.0: enabling device (0000 -> 0002)
iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
wmi: Mapper loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.12-bfq ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7d3b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.12-bfq ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.12-bfq xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.12-bfq xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-5: new full-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
EFI Variables Facility v0.08 2004-May-17
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 3-5: New USB device found, idVendor=046d, idProduct=c52f
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Receiver
usb 3-5: Manufacturer: Logitech
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:1f:af:31:e6:f8
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[drm] radeon kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ATPX version 1, functions 0x00000033
usb 1-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.8: new full-speed USB device number 3 using ehci-pci
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
radeon 0000:01:00.0: enabling device (0000 -> 0003)
[drm] initializing kernel modesetting (BONAIRE 0x1002:0x6640 0x1028:0x05CD 0x00).
[drm] register mmio base: 0xF7C00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
vga_switcheroo: enabled
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:11:00.0: SDHCI controller found [1217:8520] (rev 1)
mmc0: Unknown controller version (3). You may experience problems.
mmc0: SDHCI controller on PCI [0000:11:00.0] using ADMA
usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: 5880
usb 2-1.8: Manufacturer: Broadcom Corp
usb 2-1.8: SerialNumber: 0123456789ABCD
usb 2-1.8: config 0 descriptor??
ATOM BIOS: Dell
[drm] GPU not posted. posting now...
usb 1-1.5: New USB device found, idVendor=1bcf, idProduct=2984
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Laptop_Integrated_Webcam_HD
usb 1-1.5: Manufacturer: SunplusIT Inc
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 8168708 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading bonaire Microcode
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
dell_laptop: Using dell-rbtn acpi driver for receiving events
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input11
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3226: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Dock Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x1a
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[drm] Internal thermal controller without fan control
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
== power state 0 ==
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
r
b
== power state 1 ==
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
== power state 2 ==
ui class:
battery
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 60000 mclk: 30000 pcie gen: 3 pcie lanes: 16
status:
[drm] radeon: dpm initialized
[drm] Found UVD firmware Version: 1.64 Family ID: 9
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff896ad77e0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff896ad77e0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff896ad77e0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff896ad77e0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff896ad77e0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffa0428a038d30
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff896ad77e0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff896ad77e0c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 18 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
ppdev: user-space parallel port driver
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-2
[drm] HPD1
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-3
[drm] HPD2
[drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-4
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY2
[drm] Connector 3:
[drm] VGA-2
[drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
switching from power state:
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
b
switching to power state:
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
r
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0xE0721000
[drm] vram apper at 0xE0000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.49.0 20080528 for 0000:01:00.0 on minor 1
snd_hda_intel: probe of 0000:01:00.1 failed with error -2
dell_wmi: Detected Dell WMI interface version 1
input: Dell WMI hotkeys as /devices/virtual/input/input17
udevd[698]: Error calling EVIOCSKEYCODE on device node '/dev/input/event16' (scan code 0x150, key code 190): Invalid argument
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ATPX version 1, functions 0x00000033
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52F.0001/input/input18
hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input19
Linux video capture interface: v2.00
hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (1bcf:2984)
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Adding 8388604k swap on /dev/sda5. Priority:-1 extents:1 across:8388604k FS
fuse init (API version 7.26)
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
nbd: registered device at major 43
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
XFS (sda6): Mounting V5 Filesystem
XFS (sda6): Ending clean mount
udevd[1039]: Error calling EVIOCSKEYCODE on device node '/dev/input/event16' (scan code 0x150, key code 190): Invalid argument
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
NET: Registered protocol family 10
udevd[692]: RUN{builtin}: 'uaccess' unknown /lib/udev/rules.d/73-seat-late.rules:15
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Segment Routing with IPv6
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
Netfilter messages via NETLINK v0.30.
nf_tables: (c) 2007-2009 Patrick McHardy
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff8eceeb80)
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
wlan0: authenticate with dc:9f:db:83:95:9f
wlan0: send auth to dc:9f:db:83:95:9f (try 1/3)
wlan0: authenticated
wlan0: associate with dc:9f:db:83:95:9f (try 1/3)
wlan0: RX AssocResp from dc:9f:db:83:95:9f (capab=0x31 status=0 aid=7)
wlan0: associated
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3192523111 Hz
vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff896ad77e0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff896ad77e0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff896ad77e0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff896ad77e0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff896ad77e0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffa0428a038d30
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff896ad77e0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff896ad77e0c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 2 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 9 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
switching from power state:
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
b
switching to power state:
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
r
elogind[1859]: New seat seat0.
elogind[1859]: Watching system buttons on /dev/input/event4 (Power Button)
elogind[1859]: Watching system buttons on /dev/input/event6 (Video Bus)
elogind[1859]: Watching system buttons on /dev/input/event5 (Video Bus)
elogind[1859]: Watching system buttons on /dev/input/event2 (Power Button)
elogind[1859]: Watching system buttons on /dev/input/event1 (Lid Switch)
elogind[1859]: Watching system buttons on /dev/input/event3 (Sleep Button)
elogind[1859]: Watching system buttons on /dev/input/event16 (Dell WMI hotkeys)
traps: vivaldi-bin[1979] trap invalid opcode ip:5616fee1bde9 sp:7fff786317d0 error:0
in vivaldi-bin[5616fbf78000+6600000]
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: CPU 6: Machine Check: 0 Bank 128: 0000000088030803
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: TSC 104e3b9f289
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493258566 SOCKET 0 APIC 5 microcode 1c
mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088030803
mce: [Hardware Error]: TSC 104e3ba8fd4
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493258566 SOCKET 0 APIC 4 microcode 1c
CPU6: Core temperature/speed normal
CPU2: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU6: Package temperature/speed normal
mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088050802
mce: [Hardware Error]: TSC 104e3ea0dbf
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493258566 SOCKET 0 APIC 4 microcode 1c
mce: [Hardware Error]: CPU 6: Machine Check: 0 Bank 128: 0000000088050802
mce: [Hardware Error]: TSC 104e3ea5706
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493258566 SOCKET 0 APIC 5 microcode 1c
wlan0: authenticate with dc:9f:db:83:95:9f
wlan0: send auth to dc:9f:db:83:95:9f (try 1/3)
wlan0: authenticated
wlan0: associate with dc:9f:db:83:95:9f (try 1/3)
wlan0: RX AssocResp from dc:9f:db:83:95:9f (capab=0x31 status=0 aid=7)
wlan0: associated
wlan0: authenticate with dc:9f:db:83:95:9f
wlan0: send auth to dc:9f:db:83:95:9f (try 1/3)
wlan0: authenticated
wlan0: associate with dc:9f:db:83:95:9f (try 1/3)
wlan0: RX AssocResp from dc:9f:db:83:95:9f (capab=0x31 status=0 aid=7)
wlan0: associated
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff896ad77e0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff896ad77e0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff896ad77e0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff896ad77e0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff896ad77e0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffa0428a038d30
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff896ad77e0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff896ad77e0c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
switching from power state:
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
b
switching to power state:
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
r
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff896ad77e0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff896ad77e0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff896ad77e0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff896ad77e0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff896ad77e0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffa0428a038d30
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff896ad77e0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff896ad77e0c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 10 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
switching from power state:
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
b
switching to power state:
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
r
CPU6: Core temperature above threshold, cpu clock throttled (total events = 162)
CPU2: Core temperature above threshold, cpu clock throttled (total events = 162)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 162)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 162)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 162)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 162)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 162)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 162)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 162)
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
CPU6: Package temperature above threshold, cpu clock throttled (total events = 162)
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088030803
mce: [Hardware Error]: TSC 13cc688205f2e
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493367312 SOCKET 0 APIC 4 microcode 1c
mce: [Hardware Error]: CPU 6: Machine Check: 0 Bank 128: 0000000088030803
mce: [Hardware Error]: TSC 13cc68821038a
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493367312 SOCKET 0 APIC 5 microcode 1c
CPU6: Core temperature/speed normal
CPU2: Core temperature/speed normal
CPU1: Package temperature/speed normal
CPU0: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU6: Package temperature/speed normal
mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088050802
mce: [Hardware Error]: TSC 13cc68acafcdd
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493367312 SOCKET 0 APIC 4 microcode 1c
mce: [Hardware Error]: CPU 6: Machine Check: 0 Bank 128: 0000000088050802
mce: [Hardware Error]: TSC 13cc68acb4bf3
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493367312 SOCKET 0 APIC 5 microcode 1c
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff896ad77e0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff896ad77e0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff896ad77e0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff896ad77e0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff896ad77e0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffa0428a038d30
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff896ad77e0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff896ad77e0c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 9 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
switching from power state:
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
b
switching to power state:
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
r
CPU2: Core temperature above threshold, cpu clock throttled (total events = 1858)
CPU6: Core temperature above threshold, cpu clock throttled (total events = 1858)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 2010)
CPU4: Package temperature above threshold, cpu clock throttled (total events = 2010)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 2010)
CPU5: Package temperature above threshold, cpu clock throttled (total events = 2010)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 2010)
CPU7: Package temperature above threshold, cpu clock throttled (total events = 2010)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 2010)
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
CPU2: Package temperature above threshold, cpu clock throttled (total events = 2010)
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: CPU 6: Machine Check: 0 Bank 128: 0000000088030803
mce: [Hardware Error]: TSC 1480cb967e585
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493371195 SOCKET 0 APIC 5 microcode 1c
mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088030803
mce: [Hardware Error]: TSC 1480cb96886de
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493371195 SOCKET 0 APIC 4 microcode 1c
CPU6: Core temperature/speed normal
CPU3: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU5: Package temperature/speed normal
CPU7: Package temperature/speed normal
CPU2: Core temperature/speed normal
CPU6: Package temperature/speed normal
CPU2: Package temperature/speed normal
CPU4: Package temperature/speed normal
CPU0: Package temperature/speed normal
mce: [Hardware Error]: CPU 2: Machine Check: 0 Bank 128: 0000000088040802
mce: [Hardware Error]: TSC 1480cba8c3ecc
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493371195 SOCKET 0 APIC 4 microcode 1c
mce: [Hardware Error]: CPU 6: Machine Check: 0 Bank 128: 0000000088040802
mce: [Hardware Error]: TSC 1480cba8c40c6
mce: [Hardware Error]: PROCESSOR 0:306c3 TIME 1493371195 SOCKET 0 APIC 5 microcode 1c
[drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff896ad77e0c00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff896ad77e0c04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff896ad77e0c08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff896ad77e0c0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff896ad77e0c10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffa0428a038d30
radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff896ad77e0c18
radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff896ad77e0c1c
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ring test on 6 succeeded in 9 usecs
[drm] ring test on 7 succeeded in 4 usecs
[drm] VCE initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
switching from power state:
ui class:
none
internal class:
boot
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
status:
c
b
switching to power state:
ui class:
performance
internal class:
none
caps:
uvd vclk: 0 dclk: 0
power level 0 sclk: 30000 mclk: 15000 pcie gen: 3 pcie lanes: 16
power level 1 sclk: 107500 mclk: 137500 pcie gen: 3 pcie lanes: 16
status:
r