dmesg - ss
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-66-generic (buildd@lgw01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #87-Ubuntu SMP Fri Mar 3 15:29:05 UTC 2017 (Ubuntu 4.4.0-66.87-generic 4.4.44)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000327c4fff] usable
BIOS-e820: [mem 0x00000000327c5000-0x00000000327c5fff] ACPI NVS
BIOS-e820: [mem 0x00000000327c6000-0x000000003280ffff] reserved
BIOS-e820: [mem 0x0000000032810000-0x0000000032866fff] usable
BIOS-e820: [mem 0x0000000032867000-0x0000000032d67fff] reserved
BIOS-e820: [mem 0x0000000032d68000-0x0000000036895fff] usable
BIOS-e820: [mem 0x0000000036896000-0x000000003733afff] reserved
BIOS-e820: [mem 0x000000003733b000-0x00000000377c2fff] usable
BIOS-e820: [mem 0x00000000377c3000-0x0000000037b86fff] ACPI NVS
BIOS-e820: [mem 0x0000000037b87000-0x0000000037f82fff] reserved
BIOS-e820: [mem 0x0000000037f83000-0x0000000037ffdfff] type 20
BIOS-e820: [mem 0x0000000037ffe000-0x0000000037ffefff] usable
BIOS-e820: [mem 0x0000000038000000-0x00000000380fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000002c1ffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi: ESRT=0x37ec9f98 ACPI=0x378cb000 ACPI 2.0=0x378cb000 SMBIOS=0x37ec8000 SMBIOS 3.0=0x37ec7000
esrt: Reserving ESRT space from 0x0000000037ec9f98 to 0x0000000037ec9fd0.
SMBIOS 3.0.0 present.
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x2c2000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0080000000 mask 7F80000000 uncachable
1 base 0040000000 mask 7FC0000000 uncachable
2 base 003C000000 mask 7FFC000000 uncachable
3 base 003A000000 mask 7FFE000000 uncachable
4 base 0039000000 mask 7FFF000000 uncachable
5 base 0038800000 mask 7FFF800000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x37fff max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x0320c000, 0x0320cfff] PGTABLE
BRK [0x0320d000, 0x0320dfff] PGTABLE
BRK [0x0320e000, 0x0320efff] PGTABLE
BRK [0x0320f000, 0x0320ffff] PGTABLE
BRK [0x03210000, 0x03210fff] PGTABLE
BRK [0x03211000, 0x03211fff] PGTABLE
RAMDISK: [mem 0x2d76e000-0x301c8fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000378CB000 000024 (v02 MSI_NB)
ACPI: XSDT 0x00000000378CB0A8 0000D4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FACP 0x00000000378EF0C8 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: DSDT 0x00000000378CB218 023EB0 (v02 MSI_NB MEGABOOK 01072009 INTL 20120913)
ACPI: FACS 0x0000000037B86F80 000040
ACPI: APIC 0x00000000378EF1D8 0000BC (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FPDT 0x00000000378EF298 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: FIDT 0x00000000378EF2E0 00009C (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: ECDT 0x00000000378EF380 0000C1 (v01 MSI_NB MEGABOOK 01072009 AMI. 00010013)
ACPI: MCFG 0x00000000378EF448 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
ACPI: HPET 0x00000000378EF488 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 0005000B)
ACPI: SSDT 0x00000000378EF4C0 000315 (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x00000000378EF7D8 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000378EF870 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x00000000378EFAB8 000CF3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x00000000378F07B0 000034 (v01 INTEL 00000000 MSFT 0000005F)
ACPI: DBG2 0x00000000378F07E8 000054 (v00 INTEL 00000000 MSFT 0000005F)
ACPI: SSDT 0x00000000378F0840 000619 (v02 AMI xh_rvp11 00000000 INTL 20120913)
ACPI: SLIC 0x00000000378F0E60 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: SSDT 0x00000000378F0FD8 00566B (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
ACPI: UEFI 0x00000000378F6648 000042 (v01 00000000 00000000)
ACPI: SSDT 0x00000000378F6690 000E58 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
ACPI: BGRT 0x00000000378F74E8 000038 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
ACPI: SSDT 0x00000000378F7520 00009F (v02 SgRef SgPeg 00001000 INTL 20120913)
ACPI: SSDT 0x00000000378F75C0 00196E (v01 OptRef OptTabl 00001000 INTL 20120913)
ACPI: ASF! 0x00000000378F8F30 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000002c1ffffff]
NODE_DATA(0) allocated [mem 0x2c1ff6000-0x2c1ffafff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000002c1ffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x00000000327c4fff]
node 0: [mem 0x0000000032810000-0x0000000032866fff]
node 0: [mem 0x0000000032d68000-0x0000000036895fff]
node 0: [mem 0x000000003733b000-0x00000000377c2fff]
node 0: [mem 0x0000000037ffe000-0x0000000037ffefff]
node 0: [mem 0x0000000100000000-0x00000002c1ffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000002c1ffffff]
On node 0 totalpages: 2066287
DMA zone: 64 pages used for memmap
DMA zone: 22 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 3424 pages used for memmap
DMA32 zone: 219091 pages, LIFO batch:31
Normal zone: 28800 pages used for memmap
Normal zone: 1843200 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x39000000-0x3cffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x327c5000-0x327c5fff]
PM: Registered nosave memory: [mem 0x327c6000-0x3280ffff]
PM: Registered nosave memory: [mem 0x32867000-0x32d67fff]
PM: Registered nosave memory: [mem 0x36896000-0x3733afff]
PM: Registered nosave memory: [mem 0x377c3000-0x37b86fff]
PM: Registered nosave memory: [mem 0x37b87000-0x37f82fff]
PM: Registered nosave memory: [mem 0x37f83000-0x37ffdfff]
PM: Registered nosave memory: [mem 0x37fff000-0x37ffffff]
PM: Registered nosave memory: [mem 0x38000000-0x380fffff]
PM: Registered nosave memory: [mem 0x38100000-0x38ffffff]
PM: Registered nosave memory: [mem 0x39000000-0x3cffffff]
PM: Registered nosave memory: [mem 0x3d000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x3d000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8802c1c00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2033977
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7950568K/8265148K available (8452K kernel code, 1293K rwdata, 3980K rodata, 1488K init, 1316K bss, 314580K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:2048 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 2591.950 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5183.90 BogoMIPS (lpj=10367800)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20150930/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20150930/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp11) while loading table (20150930/tbxfload-193)
ACPI Error: 1 table load failures, 8 successful (20150930/tbxfload-214)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
ftrace: allocating 32123 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (41471.20 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x327c5000-0x327c5fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x377c3000-0x37b86fff] (3948544 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 0:40:04, date: 03/24/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC description table is found, configuring boot EC
ACPI : EC: EC started
ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8802b90ef500), AE_NOT_FOUND (20150930/psparse-542)
ACPI : EC: Fail in evaluating the _REG object of EC device. Broken bios is suspected.
ACPI Error: [^^^PEG0.PEGP.EASP] Namespace lookup failure, AE_NOT_FOUND (20150930/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8802b90ef500), AE_NOT_FOUND (20150930/psparse-542)
ACPI: Executed 24 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802B7D72000 0006F2 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802B7890C00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802B7D72800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802B7871E00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x3d000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc00ffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1910] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:191b] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xdd000000-0xddffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x70000000-0x7fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf12f000-0xdf12ffff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf110000-0xdf11ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf12e000-0xdf12efff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf12d000-0xdf12dfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf128000-0xdf129fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf12c000-0xdf12c0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf12b000-0xdf12b7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:a114] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.5: [8086:a11d] type 01 class 0x060400
pci 0000:00:1d.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.5: System wakeup disabled by ACPI
pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.6: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:a14e] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf124000-0xdf127fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf120000-0xdf123fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf100000-0xdf10ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf12a000-0xdf12a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:01:00.0: [10de:13d8] type 00 class 0x030200
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xc0000000-0xc1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03-3b]
pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xdc0fffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:3c:00.0: [2646:0010] type 00 class 0x010601
pci 0000:3c:00.0: reg 0x24: [mem 0xdf520000-0xdf520fff]
pci 0000:3c:00.0: reg 0x30: [mem 0xdf500000-0xdf51ffff pref]
pci 0000:3c:00.0: supports D1
pci 0000:3c:00.0: PME# supported from D0 D1 D3hot
pci 0000:3c:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 3c]
pci 0000:00:1d.0: bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:3d:00.0: [1969:e0a1] type 00 class 0x020000
pci 0000:3d:00.0: reg 0x10: [mem 0xdf400000-0xdf43ffff 64bit]
pci 0000:3d:00.0: reg 0x18: [io 0xd000-0xd07f]
pci 0000:3d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:3d:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.5: PCI bridge to [bus 3d]
pci 0000:00:1d.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1d.5: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:3e:00.0: [168c:003e] type 00 class 0x028000
pci 0000:3e:00.0: reg 0x10: [mem 0xdf200000-0xdf3fffff 64bit]
pci 0000:3e:00.0: PME# supported from D0 D3hot D3cold
pci 0000:3e:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.6: PCI bridge to [bus 3e]
pci 0000:00:1d.6: bridge window [mem 0xdf200000-0xdf3fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
e820: reserve RAM buffer [mem 0x327c5000-0x33ffffff]
e820: reserve RAM buffer [mem 0x32867000-0x33ffffff]
e820: reserve RAM buffer [mem 0x36896000-0x37ffffff]
e820: reserve RAM buffer [mem 0x377c3000-0x37ffffff]
e820: reserve RAM buffer [mem 0x37fff000-0x37ffffff]
e820: reserve RAM buffer [mem 0x2c2000000-0x2c3ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs MSI0007 PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs ETD0306 SYN1500 SYN0002 PNP0f13 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:05: [io 0x1854-0x1857] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [io 0xff00-0xfffe] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03-3b] add_size 1000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0x3d000000-0x3d1fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x3d200000-0x3d3fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xb0000000-0xc1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0x3d000000-0x3d1fffff]
pci 0000:00:1c.0: bridge window [mem 0x3d200000-0x3d3fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 03-3b]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xdc0fffff]
pci 0000:00:1c.4: bridge window [mem 0x80000000-0xa1ffffff 64bit pref]
pci 0000:00:1d.0: PCI bridge to [bus 3c]
pci 0000:00:1d.0: bridge window [mem 0xdf500000-0xdf5fffff]
pci 0000:00:1d.5: PCI bridge to [bus 3d]
pci 0000:00:1d.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1d.5: bridge window [mem 0xdf400000-0xdf4fffff]
pci 0000:00:1d.6: PCI bridge to [bus 3e]
pci 0000:00:1d.6: bridge window [mem 0xdf200000-0xdf3fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x3d000000-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0xfc000000-0xfc00ffff window]
pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xb0000000-0xc1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0x3d000000-0x3d1fffff]
pci_bus 0000:02: resource 2 [mem 0x3d200000-0x3d3fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xc4000000-0xdc0fffff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0xa1ffffff 64bit pref]
pci_bus 0000:3c: resource 1 [mem 0xdf500000-0xdf5fffff]
pci_bus 0000:3d: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:3d: resource 1 [mem 0xdf400000-0xdf4fffff]
pci_bus 0000:3e: resource 1 [mem 0xdf200000-0xdf3fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 43372K (ffff88002d76e000 - ffff8800301c9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x2976e000-0x2d76e000] (64MB) mapped at [ffff88002976e000-ffff88002d76dfff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1490316004.944:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x70000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
intel_idle: state C8-SKL is disabled
intel_idle: state C9-SKL is disabled
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3f/PNP0C09:01/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (68 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:02: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-66-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU1 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU2 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU3 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU4 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU5 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU6 sig=0x506e3, pf=0x20, revision=0x8a
microcode: CPU7 sig=0x506e3, pf=0x20, revision=0x8a
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 32ca4feee90b5cde51f5f8c0e024b22f8c679982'
zswap: loaded using pool lzo/zbud
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:912:658
block ram11: hash matches
rtc_cmos 00:04: setting system clock to 2017-03-24 00:40:05 UTC (1490316005)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ACPI: Battery Slot [BAT1] (battery present)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1776K (ffff880002844000 - ffff880002a00000)
Freeing unused kernel memory: 116K (ffff880002de3000 - ffff880002e00000)
usb 1-2: new full-speed USB device number 2 using xhci_hcd
random: systemd-udevd: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 15 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:17.0: version 3.0
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
alx 0000:3d:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:f4:81:df]
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xdf12b000 port 0xdf12b280 irq 122
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
nvidia 0000:01:00.0: enabling device (0006 -> 0007)
nvidia-nvlink: Nvlink Core is being initialized, major device number 246
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 378.13 Tue Feb 7 20:10:06 PST 2017 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 378.13 Tue Feb 7 18:30:08 PST 2017
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
ahci 0000:3c:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:3c:00.0: flags: 64bit ncq only pio
scsi host4: ahci
ata5: SATA max UDMA/133 abar m4096@0xdf520000 port 0xdf520100 irq 123
[drm] Memory usable by graphics device = 4096M
checking generic (70000000 7f0000) vs hw (70000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
alx 0000:3d:00.0 enp61s0: renamed from eth0
usb 1-2: New USB device found, idVendor=046d, idProduct=c52b
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Receiver
usb 1-2: Manufacturer: Logitech
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input8
[drm] Initialized i915_bpo 1.6.0 20160425 for 0000:00:02.0 on minor 1
usb 1-3: new high-speed USB device number 3 using xhci_hcd
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 3:0:0:0: [sda] 4096-byte physical blocks
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-3: New USB device found, idVendor=0bda, idProduct=0129
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: USB2.0-CRW
usb 1-3: Manufacturer: Generic
usb 1-3: SerialNumber: 20100201396000000
ata5.00: ATA-8: Kingston SHPM2280P2/240G, 0C4005T2, max UDMA/133
ata5.00: 468862128 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA Kingston SHPM228 05T2 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
sd 4:0:0:0: [sdb] 4096-byte physical blocks
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3
sd 4:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 < sda5 sda6 > sda3
sd 3:0:0:0: [sda] Attached SCSI disk
fbcon: inteldrmfb (fb0) is primary device
psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4a5f01)
psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
tsc: Refined TSC clocksource calibration: 2591.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x255cb5c6a11, max_idle_ns: 440795249002 ns
usb 1-10: new full-speed USB device number 4 using xhci_hcd
psmouse serio1: elantech: Elan sample query result 07, 74, 95
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
usb 1-10: New USB device found, idVendor=0cf3, idProduct=e300
usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-11: new high-speed USB device number 5 using xhci_hcd
usb 1-11: New USB device found, idVendor=5986, idProduct=055c
usb 1-11: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-11: Product: BisonCam, NB Pro
usb 1-11: Manufacturer: Generic
usb 1-11: SerialNumber: 200901010001
usbcore: registered new interface driver rtsx_usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
input: Logitech M185 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:4008.0005/input/input9
logitech-hidpp-device 0003:046D:4008.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech M185] on usb-0000:00:14.0-2:2
[drm] RC6 on
clocksource: Switched to clocksource tsc
Console: switching to colour frame buffer device 240x67
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input10
logitech-hidpp-device 0003:046D:400A.0004: input,hidraw2: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-2:1
random: nonblocking pool is initialized
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Debug File System...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Slices.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Set console keymap...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Started Read required files in advance.
systemd[1]: Started Braille Device Support.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro
systemd-journald[274]: Received request to flush runtime journal from PID 1
wmi: Mapper loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver btusb
Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin
Bluetooth: hci0: QCA: patch rome 0x302 build 0x138, firmware rome 0x302 build 0x111
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin
snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:055c)
ath10k_pci 0000:3e:00.0: enabling device (0000 -> 0002)
ath10k_pci 0000:3e:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0
input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC898: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
input: MSI WMI hotkeys as /devices/virtual/input/input16
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 16998396k swap on /dev/sdb1. Priority:-1 extents:1 across:16998396k SSFS
FAT-fs (sdb3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ath10k_pci 0000:3e:00.0: Direct firmware load for ath10k/cal-pci-0000:3e:00.0.bin failed with error -2
EXT4-fs (sda6): recovery complete
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
audit: type=1400 audit(1490316013.653:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=927 comm="apparmor_parser"
audit: type=1400 audit(1490316013.653:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=931 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=924 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=929 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=929 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=923 comm="apparmor_parser"
audit: type=1400 audit(1490316013.657:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=923 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): enp61s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp61s0: link is not ready
ath10k_pci 0000:3e:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff sub 1a56:1535) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 fwapi 5 bdapi 2 htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 features wowlan,ignore-otp,no-4addr-pad
ath10k_pci 0000:3e:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
ath10k_pci 0000:3e:00.0 wlp62s0: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp62s0: link is not ready
ata4.00: configured for UDMA/133
ata4: EH complete
IPv6: ADDRCONF(NETDEV_UP): wlp62s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp62s0: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp62s0: authenticate with 1c:7e:e5:dc:9a:72
wlp62s0: send auth to 1c:7e:e5:dc:9a:72 (try 1/3)
wlp62s0: authenticated
wlp62s0: associate with 1c:7e:e5:dc:9a:72 (try 1/3)
wlp62s0: RX AssocResp from 1c:7e:e5:dc:9a:72 (capab=0x411 status=0 aid=2)
wlp62s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp62s0: link becomes ready
ath: EEPROM regdomain: 0x8283
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3
ath: Country alpha2 being used: RU
ath: Regpair used: 0x3
ath: regdomain 0x8283 dynamically updated by country IE
cfg80211: Regulatory domain changed to country: RU
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5650000 KHz - 5730000 KHz @ 40000 KHz), (N/A, 3000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
bbswitch: version 0.8
bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
bbswitch: detected an Optimus _DSM function
bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver
nvidia-modeset: Unloading
nvidia-nvlink: Unregistered the Nvlink Core, major device number 246
bbswitch: disabling discrete graphics
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150930/nsarguments-95)
pci_raw_set_power_state: 54 callbacks suppressed
pci 0000:01:00.0: Refused to change power state, currently in D0
bbswitch: enabling discrete graphics