dmesg - 170323-warmup
pci 0000:00:11.0: reg 0x1c: [io 0x7000-0x7003]
pci 0000:00:11.0: reg 0x20: [io 0x6000-0x600f]
pci 0000:00:11.0: reg 0x24: [mem 0xf7ffe000-0xf7ffe3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf7ff7000-0xf7ff7fff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf7ffe400-0xf7ffe4ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf7ffc000-0xf7ffcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf7ffe800-0xf7ffe8ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf7ff8000-0xf7ffbfff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xf7ffd000-0xf7ffdfff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xf7fff000-0xf7ffffff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xf7ffec00-0xf7ffecff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:05:00.0: [197b:2363] type 00 class 0x010185
pci 0000:05:00.0: reg 0x24: [mem 0xfe9fe000-0xfe9fffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
pci 0000:05:00.1: reg 0x10: [io 0xec00-0xec07]
pci 0000:05:00.1: reg 0x14: [io 0xe880-0xe883]
pci 0000:05:00.1: reg 0x18: [io 0xe800-0xe807]
pci 0000:05:00.1: reg 0x1c: [io 0xe480-0xe483]
pci 0000:05:00.1: reg 0x20: [io 0xe400-0xe40f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 05]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:04:00.0: [11ab:4381] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xd800-0xd8ff]
pci 0000:04:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfe7fe000-0xfe7fffff 64bit]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:00.0: [1002:6798] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0xfe6c0000-0xfe6fffff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0xc000-0xc0ff]
pci 0000:02:00.0: reg 0x30: [mem 0xfe6a0000-0xfe6bffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot
pci 0000:02:00.1: [1002:aaa0] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xfe69c000-0xfe69ffff 64bit]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:0c.0: PCI bridge to [bus 02]
pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0c.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:05.0: [1102:0005] type 00 class 0x040100
pci 0000:01:05.0: reg 0x10: [io 0xbc00-0xbc1f]
pci 0000:01:05.0: reg 0x14: [mem 0xfe400000-0xfe5fffff 64bit]
pci 0000:01:05.0: reg 0x1c: [mem 0xf8000000-0xfbffffff 64bit]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe5fffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *4 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0, disabled.
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfe80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b00-0x0b1f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [io 0xfe00-0xfefe] has been reserved
system 00:04: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:04: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:04: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x0230-0x023f] has been reserved
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: [io 0x0f40-0x0f4f] has been reserved
system 00:05: [io 0x0a30-0x0a3f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: PCI bridge to [bus 05]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:0c.0: PCI bridge to [bus 02]
pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0c.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 01]
pci 0000:00:14.4: bridge window [io 0xb000-0xbfff]
pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfe5fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfe5fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff window]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:12.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:05:00.0: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:05:00.1: async suspend disabled to avoid multi-function power-on ordering issue
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21556K (ffff8800355d5000 - ffff880036ae2000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1490301691.848:1): initialized
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r8 (with cgroups support)
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:06.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:0c.0:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
xenfs: not registering filesystem on non-xen platform
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
Key type dns_resolver registered
microcode: microcode updated early to new patch_level=0x010000dc
microcode: CPU0: patch_level=0x010000dc
microcode: CPU1: patch_level=0x010000dc
microcode: CPU2: patch_level=0x010000dc
microcode: CPU3: patch_level=0x010000dc
microcode: CPU4: patch_level=0x010000dc
microcode: CPU5: patch_level=0x010000dc
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Key type encrypted registered
evm: HMAC attrs: 0x1
Freeing unused kernel memory: 1160K (ffffffff81ce2000 - ffffffff81e04000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 296K (ffff8800017b6000 - ffff880001800000)
Freeing unused kernel memory: 1260K (ffff880001ac5000 - ffff880001c00000)
CFS CPU scheduler.
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
sky2: driver version 1.30
sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
sky2 0000:04:00.0 eth0: addr f4:6d:04:18:38:48
SCSI subsystem initialized
QUIRK: Enable AMD PLL fix
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (\_SB.PCI0.SBRG.ASOC.SMRG) (20160831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
xhci_hcd 0000:03:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf7ffe400
libata version 3.00 loaded.
pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
scsi host0: pata_jmicron
scsi host1: pata_jmicron
ata1: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 41
ata2: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 41
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:12.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf7ffe800
sky2 0000:04:00.0 eth1: renamed from eth0
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xf7ffec00
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:16.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ohci-pci: OHCI PCI platform driver
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata3: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe100 irq 19
ata4: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe180 irq 19
ata5: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe200 irq 19
ata6: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe280 irq 19
ata7: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe300 irq 19
ata8: SATA max UDMA/133 abar m1024@0xf7ffe000 port 0xf7ffe380 irq 19
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:12.0: irq 18, io mem 0xf7ff7000
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 42
ata10: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 42
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ohci_hcd
usb usb6: SerialNumber: 0000:00:12.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:13.0: irq 18, io mem 0xf7ffc000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ohci_hcd
usb usb7: SerialNumber: 0000:00:13.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci-pci 0000:00:14.5: irq 18, io mem 0xf7ffd000
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: OHCI PCI host controller
usb usb8: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ohci_hcd
usb usb8: SerialNumber: 0000:00:14.5
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:16.0: irq 18, io mem 0xf7fff000
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.9.0-16.1-liquorix-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:16.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 5-1: new high-speed USB device number 2 using ehci-pci
ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata9.00: ATAPI: TEAC DV-W524GSB, AT11, max UDMA/100
ata9.00: configured for UDMA/100
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6.00: ATA-9: WDC WD4003FZEX-00Z4SA0, 01.01A01, max UDMA/133
ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD4003FZEX-0 1A01 PQ: 0 ANSI: 5
usb 5-1: New USB device found, idVendor=174c, idProduct=55aa
usb 5-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 5-1: Product: External HDD
usb 5-1: Manufacturer: 01234567890123456789012345678901234567890123
usb 5-1: SerialNumber: 201303040980
usb-storage 5-1:1.0: USB Mass Storage device detected
usb-storage 5-1:1.0: Quirks match for vid 174c pid 55aa: 400000
scsi host10: usb-storage 5-1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata7.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
scsi 6:0:0:0: Direct-Access ATA WDC WD1001FALS-0 0K05 PQ: 0 ANSI: 5
scsi 8:0:0:0: CD-ROM TEAC DV-W524GSB AT11 PQ: 0 ANSI: 5
sd 5:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
sd 5:0:0:0: [sda] 4096-byte physical blocks
sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 6-1: new full-speed USB device number 2 using ohci-pci
sr 8:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 8:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 sda3
sd 5:0:0:0: [sda] Attached SCSI disk
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI disk
usb 3-4: new high-speed USB device number 4 using ehci-pci
usb 6-1: New USB device found, idVendor=e0ff, idProduct=0002
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: G3
usb 6-1: Manufacturer: A.....
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: A..... G3 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:E0FF:0002.0001/input/input3
hid-generic 0003:E0FF:0002.0001: input,hidraw0: USB HID v1.00 Mouse [A..... G3] on usb-0000:00:12.0-1/input0
input: A..... G3 as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.1/0003:E0FF:0002.0002/input/input4
usb 3-4: New USB device found, idVendor=058f, idProduct=6254
usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 4 ports detected
hid-generic 0003:E0FF:0002.0002: input,hiddev0,hidraw1: USB HID v1.00 Keyboard [A..... G3] on usb-0000:00:12.0-1/input1
PM: Starting manual resume from disk
usb 6-2: new low-speed USB device number 3 using ohci-pci
tsc: Refined TSC clocksource calibration: 3311.099 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fba416af79, max_idle_ns: 440795365917 ns
usb 3-4.2: new high-speed USB device number 5 using ehci-pci
usb 6-2: New USB device found, idVendor=046a, idProduct=0801
usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-2: Product: Wired Keyboard
usb 6-2: Manufacturer: NOVATEK
input: NOVATEK Wired Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:046A:0801.0003/input/input5
usb 3-4.2: New USB device found, idVendor=058f, idProduct=6254
usb 3-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-4.2:1.0: USB hub found
hub 3-4.2:1.0: 4 ports detected
hid-generic 0003:046A:0801.0003: input,hidraw2: USB HID v1.10 Keyboard [NOVATEK Wired Keyboard] on usb-0000:00:12.0-2/input0
input: NOVATEK Wired Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:046A:0801.0004/input/input6
hid-generic 0003:046A:0801.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [NOVATEK Wired Keyboard] on usb-0000:00:12.0-2/input1
scsi 10:0:0:0: Direct-Access ST500LT0 12-9WS142 0001 PQ: 0 ANSI: 5
sd 10:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 10:0:0:0: [sdc] Write Protect is off
sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdc] No Caching mode page found
sd 10:0:0:0: [sdc] Assuming drive cache: write through
clocksource: Switched to clocksource tsc
sdc: sdc1
sd 10:0:0:0: [sdc] Attached SCSI disk
random: crng init done
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
NET: Registered protocol family 10
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: plymouth-start.service: Cannot add dependency job, ignoring: Unit plymouth-start.service is masked.
systemd[1]: plymouth-read-write.service: Cannot add dependency job, ignoring: Unit plymouth-read-write.service is masked.
systemd[1]: plymouth-quit-wait.service: Cannot add dependency job, ignoring: Unit plymouth-quit-wait.service is masked.
systemd[1]: plymouth-quit.service: Cannot add dependency job, ignoring: Unit plymouth-quit.service is masked.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
loop: module loaded
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: Attached scsi generic sg1 type 0
sr 8:0:0:0: Attached scsi generic sg2 type 5
sd 10:0:0:0: Attached scsi generic sg3 type 0
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EXT4-fs (sda2): re-mounted. Opts: (null)
systemd-journald[286]: Received request to flush runtime journal from PID 1
ACPI: ACPI: processor limited to max C-state 1
acpi_cpufreq: overriding BIOS provided _PSD data
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc900019e1b00). heartbeat=60 sec (nowayout=0)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
ATK0110 ATK0110:00: EC enabled
input: PC Speaker as /devices/platform/pcspkr/input/input9
Adding 33551356k swap on /dev/sda3. Priority:-1 extents:1 across:33551356k FS
[drm] Initialized
snd_ctxfi 0000:01:05.0: chip 20K1 model Unknown (1102:0028) is found
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:02:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card2/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card2/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card2/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card2/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card2/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:0c.0/0000:02:00.1/sound/card2/input15
snd_hda_codec_via hdaudioC1D0: autoconfig for VT2020: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
snd_hda_codec_via hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC1D0: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC1D0: dig-out=0x2d/0x2e
snd_hda_codec_via hdaudioC1D0: inputs:
snd_hda_codec_via hdaudioC1D0: Front Mic=0x29
snd_hda_codec_via hdaudioC1D0: Rear Mic=0x2b
snd_hda_codec_via hdaudioC1D0: Line=0x2a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input18
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input19
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input20
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input21
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input22
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input23
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_ctxfi 0000:01:05.0: Use xfi-native timer
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amdgpu: unknown parameter 'modeset' ignored
[drm] amdgpu kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
[drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 0x1682:0x3214 0x00).
[drm] register mmio base: 0xFE6C0000
[drm] register mmio size: 262144
ATOM BIOS: Tahiti
[drm] GPU post is not needed
[drm] Changing default dispclk from 500Mhz to 600Mhz
[TTM] Zone kernel: Available graphics memory: 8216956 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
amdgpu 0000:02:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
amdgpu 0000:02:00.0: GTT: 8024M 0x00000000C0000000 - 0x00000002B585EFFF
[drm] Detected VRAM RAM=3072M, BAR=256M
[drm] RAM width 384bits GDDR5
[drm] amdgpu: 3072M of VRAM memory ready
[drm] amdgpu: 8024M of GTT memory ready.
[drm] GART: num cpu pages 2054239, num gpu pages 2054239
amdgpu 0000:02:00.0: PCIE GART of 8024M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:02:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
[drm] probing gen 2 caps for device 1002:5a20 = 131cc82/0
[drm] Internal thermal controller with fan control
[drm] amdgpu: dpm initialized
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD5
[drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] DP-2
[drm] HPD4
[drm] DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD6
[drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-I-1
[drm] HPD3
[drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 4:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b
[drm] Encoders:
[drm] DFP5: INTERNAL_UNIPHY1
amdgpu 0000:02:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000010, cpu addr 0xffff88041b879010
amdgpu 0000:02:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000020, cpu addr 0xffff88041b879020
amdgpu 0000:02:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000030, cpu addr 0xffff88041b879030
amdgpu 0000:02:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000040, cpu addr 0xffff88041b879040
amdgpu 0000:02:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000050, cpu addr 0xffff88041b879050
[drm] probing gen 2 caps for device 1002:5a20 = 131cc82/0
[drm] PCIE gen 2 link speeds already enabled
[drm] ring test on 0 succeeded in 7 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 4 succeeded in 3 usecs
[drm] fb mappable at 0xD0FF0000
[drm] vram apper at 0xD0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
amdgpu 0000:02:00.0: fb0: amdgpudrmfb frame buffer device
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[drm] Initialized amdgpu 3.8.0 20150101 for 0000:02:00.0 on minor 0
sky2 0000:04:00.0 eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
NET: Registered protocol family 17
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cb5880)
sky2 0000:04:00.0 eth1: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 6 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3311096276 Hz
vboxdrv: Successfully loaded version 5.1.18_Debian (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
amdgpu 0000:02:00.0: GPU fault detected: 147 0x000e8802
amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00000000
amdgpu 0000:02:00.0: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E088002
amdgpu 0000:02:00.0: VM fault (0x02, vmid 7) at page 0, read from '' (0x00000000) (136)