dmesg - Tinker
Booting Linux on physical CPU 0x500
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.16 (leslie_yu@incredible) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #25 SMP Thu Feb 23 17:59:58 CST 2017
CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: rockchip,rk3288-miniarm
cma: Reserved 128 MiB at 0x78000000
Memory policy: Data cache writealloc
On node 0 totalpages: 524288
free_area_init_node: node 0, pgdat c10afbc0, node_mem_map eeffa000
Normal zone: 1536 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 196608 pages, LIFO batch:31
HighMem zone: 327680 pages, LIFO batch:31
PERCPU: Embedded 13 pages/cpu @eef8d000 s24256 r8192 d20800 u53248
pcpu-alloc: s24256 r8192 d20800 u53248 alloc=13*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
Kernel command line: earlyprintk console=tty1 root=/dev/mmcblk0p2 rw init=/sbin/init uboot_version=2016.09-rc1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1931748K/2097152K available (11076K kernel code, 739K rwdata, 3092K rodata, 1024K init, 539K bss, 34332K reserved, 131072K cma-reserved, 1179648K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0ed628c (15161 kB)
.init : 0xc0f00000 - 0xc1000000 (1024 kB)
.data : 0xc1000000 - 0xc10b8ec0 ( 740 kB)
.bss : 0xc10ba000 - 0xc1140ef0 ( 540 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 32.
NR_IRQS:16 nr_irqs:16 16
L2C: failed to init: -19
Architected cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Switching to timer-based delay loop, resolution 41ns
Console: colour dummy device 80x30
console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
ftrace: allocating 36938 entries in 109 pages
CPU0: update cpu_capacity 430
CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
Setting up static identity map for 0x100000 - 0x1000b8
CPU1: update cpu_capacity 430
CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
CPU2: update cpu_capacity 430
CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
CPU3: update cpu_capacity 430
CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
Brought up 4 CPUs
SMP: Total of 4 processors activated (192.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
gpiochip_add: registered GPIOs 0 to 23 on device: gpio0
gpiochip_add: registered GPIOs 24 to 55 on device: gpio1
gpiochip_add: registered GPIOs 56 to 87 on device: gpio2
gpiochip_add: registered GPIOs 88 to 119 on device: gpio3
gpiochip_add: registered GPIOs 120 to 151 on device: gpio4
gpiochip_add: registered GPIOs 152 to 183 on device: gpio5
gpiochip_add: registered GPIOs 184 to 215 on device: gpio6
gpiochip_add: registered GPIOs 216 to 247 on device: gpio7
gpiochip_add: registered GPIOs 248 to 263 on device: gpio8
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vsys-regulator[0]'
of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vdd_log[0]'
iommu: Adding device ff930000.vop to group 0
iommu: Adding device ff940000.vop to group 1
iommu: Adding device ff9a0000.vpu-service to group 2
iommu: Adding device ff9c0000.hevc-service to group 3
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
rockchip ion: success to create - cma-heap
rockchip ion: success to create - system-heap
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
clocksource: Switched to clocksource arch_sys_counter
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 24576 bytes)
UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
Key type cifs.idmap registered
fuse init (API version 7.23)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
rockchip-usb-phy phy: GPIO lookup for consumer vbus_drv
rockchip-usb-phy phy: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'vbus_drv-gpios' property of node '/phy[0]'
of_get_named_gpiod_flags: can't parse 'vbus_drv-gpio' property of node '/phy[0]'
rockchip-usb-phy phy: using lookup tables for GPIO lookup
rockchip-usb-phy phy: lookup for GPIO vbus_drv failed
rockchip-usb-phy phy: vbus_drv is not assigned!
rk-vcodec ff9a0000.vpu-service: No core reset resource define
rk-vcodec ff9a0000.vpu-service: do not have pd_video
rk-vcodec ff9a0000.vpu-service: probe device
rk-vcodec ff9a0000.vpu-service: vpu mmu dec eea7b010
rk-vcodec ff9a0000.vpu-service: checking hw id 4831
rk-vcodec ff9a0000.vpu-service: allocator is drm
rk-vcodec ff9a0000.vpu-service: init success
rk-vcodec ff9c0000.hevc-service: No aclk reset resource define
rk-vcodec ff9c0000.hevc-service: No hclk reset resource define
rk-vcodec ff9c0000.hevc-service: failed on clk_get pd_hevc
rk-vcodec ff9c0000.hevc-service: do not have pd_video
rk-vcodec ff9c0000.hevc-service: probe device
rk-vcodec ff9c0000.hevc-service: vpu mmu dec eea7b410
rk-vcodec ff9c0000.hevc-service: checking hw id 6867
rk-vcodec ff9c0000.hevc-service: allocator is drm
rk-vcodec ff9c0000.hevc-service: init success
dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
rockchip-pinctrl pinctrl: pin gpio7-22 already requested by ff680020.pwm; cannot claim for ff690000.serial
rockchip-pinctrl pinctrl: pin-238 (ff690000.serial) status -22
rockchip-pinctrl pinctrl: could not request pin 238 (gpio7-22) from group uart2-xfer on device rockchip-pinctrl
dw-apb-uart: probe of ff1c0000.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops)
rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops)
rockchip-drm display-subsystem: failed to bind ff960000.mipi (ops dw_mipi_dsi_ops): -517
rockchip-drm display-subsystem: master bind failed: -517
usbcore: registered new interface driver udl
find panel: asus,tc358762
ff960000.mipi.0 supply power not found, using dummy regulator
bridge-tc358762-dsi ff960000.mipi.0: GPIO lookup for consumer enable
bridge-tc358762-dsi ff960000.mipi.0: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/mipi@ff960000/mipi-panel[0]'
of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/mipi@ff960000/mipi-panel[0]'
bridge-tc358762-dsi ff960000.mipi.0: using lookup tables for GPIO lookup
bridge-tc358762-dsi ff960000.mipi.0: lookup for GPIO enable failed
mali ffa30000.gpu: Failed to get regulator
mali ffa30000.gpu: Power control initialization failed
brd: module loaded
loop: module loaded
zram: Added device: zram0
lkdtm: No crash points registered, enable through debugfs
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing
PPP generic driver version 2.4.2
usbcore: registered new interface driver rndis_wlan
usbcore: registered new interface driver rt2800usb
Rockchip WiFi SYS interface (V1.00) ...
pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new interface driver pegasus
usbcore: registered new interface driver rtl8150
usbcore: registered new interface driver r8152
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver smsc75xx
usbcore: registered new interface driver smsc95xx
usbcore: registered new interface driver net1080
usbcore: registered new interface driver rndis_host
usbcore: registered new interface driver MOSCHIP usb-ethernet driver
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver cdc_mbim
ff540000.usb supply vusb_d not found, using dummy regulator
ff540000.usb supply vusb_a not found, using dummy regulator
dwc2 ff540000.usb: DWC OTG Controller
dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
dwc2 ff540000.usb: irq 45, io mem 0x00000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 4.4.16 dwc2_hsotg
usb usb1: SerialNumber: ff540000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ff580000.usb supply vusb_d not found, using dummy regulator
ff580000.usb supply vusb_a not found, using dummy regulator
dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
usb 1-1: new high-speed USB device number 2 using dwc2
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
dwc2 ff580000.usb: DWC OTG Controller
dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
dwc2 ff580000.usb: irq 46, io mem 0x00000000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: DWC OTG Controller
usb usb2: Manufacturer: Linux 4.4.16 dwc2_hsotg
usb usb2: SerialNumber: ff580000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-platform: EHCI generic platform driver
ehci-platform ff500000.usb: EHCI Host Controller
ehci-platform ff500000.usb: new USB bus registered, assigned bus number 3
ehci-platform ff500000.usb: irq 44, io mem 0xff500000
ehci-platform ff500000.usb: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.16 ehci_hcd
usb usb3: SerialNumber: ff500000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver cp210x
usbcore: registered new interface driver ftdi_sio
usbcore: registered new interface driver keyspan
usbcore: registered new interface driver option
usbcore: registered new interface driver oti6858
usbcore: registered new interface driver pl2303
usbcore: registered new interface driver qcserial
usbcore: registered new interface driver sierra
usbcore: registered new interface driver iforce
usbcore: registered new interface driver xpad
usbcore: registered new interface driver usbtouchscreen
i2c /dev entries driver
rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at f091a000
tinker-mcu: tinker_mcu_probe: address = 0x45
tinker-mcu: send_cmds: 80
tinker-mcu: send_cmds: send command failed, ret = -6
tinker-mcu: tinker_mcu_probe: init_cmd_check failed, -6
tinker-ft5406: tinker_ft5406_probe: address = 0x38
usb 3-1: new high-speed USB device number 2 using ehci-platform
tinker-ft5406: tinker_ft5406_probe: wait connected timeout
rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at f091c000
rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at f091e000
rockchip-pinctrl pinctrl: pin gpio7-19 already requested by ff980000.hdmi; cannot claim for ff170000.i2c
rockchip-pinctrl pinctrl: pin-235 (ff170000.i2c) status -22
rockchip-pinctrl pinctrl: could not request pin 235 (gpio7-19) from group i2c5-xfer on device rockchip-pinctrl
rk3x-i2c ff170000.i2c: Error applying setting, reverse things back
rk3x-i2c ff170000.i2c: Initialized RK3xxx I2C bus at f0920000
rk808 0-001b: GPIO lookup for consumer dvs
rk808 0-001b: using device tree for GPIO lookup
of_get_named_gpiod_flags: parsed 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[0]' - status (0)
rk808 0-001b: GPIO lookup for consumer dvs
rk808 0-001b: using device tree for GPIO lookup
of_get_named_gpiod_flags: parsed 'dvs-gpios' property of node '/i2c@ff650000/pmic@1b[1]' - status (0)
rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
rk3x-i2c ff650000.i2c: Initialized RK3xxx I2C bus at f0922000
at24 2-0050: 1024 byte 24c08 EEPROM, writable, 1 bytes/write
rk3x-i2c ff660000.i2c: Initialized RK3xxx I2C bus at f0924000
imx219 2-0010: probing...
vcc33_mipi: supplied by vcc_sys
of_get_named_gpiod_flags: parsed 'rockchip,pd-gpio' property of node '/i2c@ff660000/camera-module@1[0]' - status (0)
of_get_named_gpiod_flags: can't parse 'rockchip,pwr-gpio' property of node '/i2c@ff660000/camera-module@1[0]'
of_get_named_gpiod_flags: can't parse 'rockchip,flash-gpio' property of node '/i2c@ff660000/camera-module@1[0]'
of_get_named_gpiod_flags: can't parse 'rockchip,torch-gpio' property of node '/i2c@ff660000/camera-module@1[0]'
of_get_named_gpiod_flags: can't parse 'rockchip,rst-gpio' property of node '/i2c@ff660000/camera-module@1[0]'
imx219 2-0010: probing successful
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
vcc_18: supplied by vcc_sys
vcc_io: supplied by vcc_sys
vccio_sd: supplied by vcc_io
rk_tsadcv2_initialize: Missing rockchip,grf property
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Bluetooth: Virtual HCI driver ver 1.5
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
rtk_btcoex: rtk_btcoex_init: version: 1.2
rtk_btcoex: create workqueue
rtk_btcoex: alloc buffers 1408, 2240 for ev and l2
usbcore: registered new interface driver bfusb
usbcore: registered new interface driver btusb
Bluetooth: Generic Bluetooth SDIO driver ver 0.1
vdd_arm: supplied by vcc_sys
cpu cpu0: chip_version: 0 0x1
cpufreq-dt cpufreq-dt: failed register driver: -17
cpufreq-dt: probe of cpufreq-dt failed with error -17
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
vcc33_sd: supplied by vcc_io
dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer cd
dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@ff0c0000[0]'
of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@ff0c0000[0]'
dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
dwmmc_rockchip ff0c0000.dwmmc: lookup for GPIO cd failed
dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer wp
dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]'
dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
dwmmc_rockchip ff0c0000.dwmmc: lookup for GPIO wp failed
rockchip-iodomain io-domains: Setting to 3300000 done
rockchip-iodomain io-domains: Setting to 3300000 done
mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
dwmmc_rockchip ff0c0000.dwmmc: 1 slots initialized
dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
dwmmc_rockchip ff0d0000.dwmmc: No vmmc regulator found
dwmmc_rockchip ff0d0000.dwmmc: No vqmmc regulator found
dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
dwmmc_rockchip ff0d0000.dwmmc: lookup for GPIO wp failed
sdhci-pltfm: SDHCI platform and OF driver helper
of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/pwr-led[0]' - status (0)
of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/act-led[0]' - status (0)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ashmem: initialized
rk3288-dmc ff610000.dmc: Channel a:
rk3288-dmc ff610000.dmc: LPDDR3 Device
rk3288-dmc ff610000.dmc: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
rk3288-dmc ff610000.dmc: freq = 533MHz
rk3288-dmc ff610000.dmc: Channel b:
rk3288-dmc ff610000.dmc: LPDDR3 Device
rk3288-dmc ff610000.dmc: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
rk3288-dmc ff610000.dmc: freq = 533MHz
rk3288-dmc ff610000.dmc: stride=9, size=256, stride_half_cap=40000000
rk3288-dmc ff610000.dmc: CPU SRAM: checked sram data from f0938000 to c100e9d4 - 5932
vcc18_ldo1: supplied by vcc_sys
usbcore: registered new interface driver snd-usb-audio
rockchip-iodomain io-domains: Setting to 3300000 done
rockchip-iodomain io-domains: Setting to 1800000 done
u32 classifier
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: HIDP socket layer initialized
8021q: 802.1Q VLAN Support v1.8
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
[WLAN_RFKILL]: Enter rfkill_wlan_init
[WLAN_RFKILL]: Enter rfkill_wlan_probe
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6212
[WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
[WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 150, flags = 0.
[WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[WLAN_RFKILL]: Exit rfkill_wlan_probe
[BT_RFKILL]: Enter rfkill_rk_init
of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 139.
of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 149.
of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 146.
of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
[BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 151.
[BT_RFKILL]: Request irq for bt wakeup host
[BT_RFKILL]: BT_WAKE_HOST IRQ fired
[BT_RFKILL]: ** disable irq
[BT_RFKILL]: bt_default device registered.
Key type dns_resolver registered
cif_isp10_v4l2_drv_probe: probing...
cif_isp10_pltfrm_dev_init(1018) ERR: could not get default pinstate
cif_isp10_pltfrm_dev_init WARN: could not get pins_sleep pinstate
cif_isp10_pltfrm_dev_init WARN: could not get pins_inactive pinstate
mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
imx219.imx_camera_module_write_config(180) ERR: no active sensor configuration
imx219.imx_camera_module_write_config(211) ERR: failed with error -14
imx219.pltfrm_camera_module_read_reg(990) ERR: i2c read from offset 0x00000000 failed with error -6
imx219.pltfrm_camera_module_read_reg(990) ERR: i2c read from offset 0x00000001 failed with error -6
imx219.imx219_check_camera_id(759) ERR: register read failed, camera module powered off?
imx219.imx219_check_camera_id(776) ERR: failed with error (-6)
imx219.imx_camera_module_attach(234) ERR: failed with error -6
cif_isp10_img_src_v4l2_i2c_subdev_to_img_src(59) ERR: failed with error -6
cif_isp10_img_src_to_img_src(70) ERR: to_img_src failed!
cif_isp10_img_src_to_img_src(78) ERR: failed with error -14
cif_isp10_img_srcs_init(1080) ERR: failed with error -14
cif_isp10_create(5412) ERR: cif_isp10_img_srcs_init failed
cif_isp10_create(5447) ERR: failed with error -14
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
Loading compiled-in X.509 certificates
rockchip-drm display-subsystem: bound ff940000.vop (ops vop_component_ops)
rockchip-drm display-subsystem: bound ff930000.vop (ops vop_component_ops)
panel doesn't be connected
rockchip-drm display-subsystem: bound ff960000.mipi (ops dw_mipi_dsi_ops)
i2c i2c-6: of_i2c: modalias failure on /hdmi@ff980000/ports
dwhdmi-rockchip ff980000.hdmi: registered DesignWare HDMI I2C bus driver
dwhdmi-rockchip ff980000.hdmi: Detected HDMI controller 0x20:0xa:0xa0:0xc1
rockchip-drm display-subsystem: bound ff980000.hdmi (ops dw_hdmi_rockchip_ops)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
rockchip-drm display-subsystem: failed to parse display resources
usb 3-1: config 1 has an invalid interface number: 255 but max is 6
usb 3-1: config 1 has no interface number 6
usb 3-1: New USB device found, idVendor=0bda, idProduct=481a
usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-1: Product: USB Audio
usb 3-1: Manufacturer: Generic
usb 3-1: SerialNumber: 201405280001
Console: switching to colour frame buffer device 240x67
rockchip-drm display-subsystem: fb0: frame buffer device
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(333000000) vco: (24 MHz * 83) / 1 = 1992000000 Hz => clk: vco / 6 = 332000000 Hz
vdd_gpu: supplied by vcc_sys
W : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 107; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 365; [Func] : kbase_devfreq_init(); success initing power_model_simple.
mali ffa30000.gpu: Probed as mali0
vcc33_lan: supplied by vcc_io
rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
rk_gmac-dwmac ff290000.ethernet: clock input from PHY
rk_gmac-dwmac ff290000.ethernet: init for RGMII
stmmac - user ID: 0x10, Synopsys ID: 0x35
Ring mode enabled
DMA HW capability register supported
Normal descriptors
RX Checksum Offload Engine supported (type 2)
TX Checksum insertion supported
Wake-Up On Lan supported
Enable RX Mitigation via HW Watchdog Timer
of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@ff290000[0]' - status (0)
dwmmc_rockchip ff0c0000.dwmmc: Successfully tuned phase to 155
mmc0: new ultra high speed SDR104 SDHC card at address 0001
mmcblk0: mmc0:0001 SD8GB 7.24 GiB
mmcblk0: p1 p2
libphy: stmmac: probed
eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
dwmmc_rockchip ff0d0000.dwmmc: No vmmc regulator found
dwmmc_rockchip ff0d0000.dwmmc: No vqmmc regulator found
dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
dwmmc_rockchip ff0d0000.dwmmc: lookup for GPIO wp failed
platform sdio-pwrseq: GPIO lookup for consumer reset
platform sdio-pwrseq: using device tree for GPIO lookup
of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
platform sdio-pwrseq: GPIO lookup for consumer reset
platform sdio-pwrseq: using device tree for GPIO lookup
of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[1]' - status (0)
dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
dwmmc_rockchip ff0d0000.dwmmc: 1 slots initialized
of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]'
of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]'
asoc-simple-card sound: i2s-hifi ff890000.i2s mapping ok
of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
gpio-5 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations
input: gpio-keys as /devices/platform/gpio-keys/input/input0
rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:10 UTC (1358499010)
mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
mmc1: new high speed SDIO card at address 0001
vcc_sd: disabling
vdd_logic: disabling
ALSA device list:
#1: rockchip,miniarm-codec
input: Generic USB Audio as /devices/platform/ff500000.usb/usb3/3-1/3-1:1.255/0003:0BDA:481A.0001/input/input1
hid-generic 0003:0BDA:481A.0001: input,hidraw0: USB HID v1.11 Device [Generic USB Audio] on usb-ff500000.usb-1/input255
EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:2.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0f00000 - c1000000)
systemd[1]: System time before build time, advancing clock.
systemd[1]: Failed to insert module 'autofs4': Function not implemented
systemd[1]: Failed to insert module 'kdbus': Function not implemented
random: systemd urandom read with 43 bits of entropy available
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(533000000) vco: (24 MHz * 133) / 3 = 1064000000 Hz => clk: vco / 2 = 532000000 Hz
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
systemd-journald[149]: Received request to flush runtime journal from PID 1
RTL871X: module init start
RTL871X: rtl8723bs v4.4.0_17166.20160322_BTCOEX20151223-654a
RTL871X: build time: Feb 14 2017 11:50:37
RTL871X: rtl8723bs BT-Coex version = BTCOEX20151223-654a
RTL871X: hal_com_config_channel_plan chplan:0x20
RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=f0:03:8c:05:b6:31
RTL871X: module init ret=0
random: nonblocking pool is initialized
ttyS0 - failed to request DMA
EXT4-fs (mmcblk0p2): resizing filesystem from 385944 to 1881088 blocks
rtk_btcoex: Open BTCOEX
rtk_btcoex: create_udpsocket: connect_port: 30001
rtk_btcoex: send msg INVITE_REQ with len:11
rtk_btcoex: BTCOEX hci_rev 0x1e4e
rtk_btcoex: BTCOEX lmp_subver 0x2b06
EXT4-fs (mmcblk0p2): resized filesystem to 1881088
cfg80211: Regulatory domain changed to country: US
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
RTL871X: nolinked power save enter
usb 1-1.2: new full-speed USB device number 3 using dwc2
usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1001
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Hub in Apple USB Keyboard
usb 1-1.2: Manufacturer: Mitsumi Electric
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 3 ports detected
usb 1-1.2.1: new low-speed USB device number 4 using dwc2
usb 1-1.2.1: New USB device found, idVendor=05ac, idProduct=0201
usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.1: Product: Apple USB Keyboard
usb 1-1.2.1: Manufacturer: Mitsumi Electric
input: Mitsumi Electric Apple USB Keyboard as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:05AC:0201.0002/input/input2
hid-generic 0003:05AC:0201.0002: input,hidraw1: USB HID v1.00 Keyboard [Mitsumi Electric Apple USB Keyboard] on usb-ff540000.usb-1.2.1/input0
usb 1-1.2.2: new low-speed USB device number 5 using dwc2
usb 1-1.2.2: New USB device found, idVendor=045e, idProduct=0737
usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2.2: Product: Compact Optical Mouse 500
usb 1-1.2.2: Manufacturer: Microsoft
input: Microsoft Compact Optical Mouse 500 as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:045E:0737.0003/input/input3
hid-generic 0003:045E:0737.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-ff540000.usb-1.2.2/input0
RTL871X: nolinked power save leave
RTL871X: nolinked power save enter
RTL871X: nolinked power save leave
RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008
RTL871X: start auth
RTL871X: auth success, start assoc
RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
RTL871X: assoc success
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: set pairwise key camid:4, addr:30:85:a9:89:41:0c, kid:0, type:AES
RTL871X: set group key camid:5, addr:30:85:a9:89:41:0c, kid:2, type:AES
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(333000000) vco: (24 MHz * 83) / 1 = 1992000000 Hz => clk: vco / 6 = 332000000 Hz
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(200000000) vco: (24 MHz * 50) / 1 = 1200000000 Hz => clk: vco / 6 = 200000000 Hz
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(533000000) vco: (24 MHz * 133) / 3 = 1064000000 Hz => clk: vco / 2 = 532000000 Hz
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: set group key camid:6, addr:30:85:a9:89:41:0c, kid:1, type:AES
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(200000000) vco: (24 MHz * 50) / 1 = 1200000000 Hz => clk: vco / 6 = 200000000 Hz
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(533000000) vco: (24 MHz * 133) / 3 = 1064000000 Hz => clk: vco / 2 = 532000000 Hz
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(200000000) vco: (24 MHz * 50) / 1 = 1200000000 Hz => clk: vco / 6 = 200000000 Hz
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: set group key camid:5, addr:30:85:a9:89:41:0c, kid:2, type:AES
RTL871X: recv eapol packet
RTL871X: send eapol packet
RTL871X: set group key camid:6, addr:30:85:a9:89:41:0c, kid:1, type:AES
rk3288-dmc ff610000.dmc: rk3288_dmcclk_round_rate(533000000) vco: (24 MHz * 133) / 3 = 1064000000 Hz => clk: vco / 2 = 532000000 Hz