dmesg - 1
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-32-generic (buildd@lgw01-43) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #37~14.04.1-Ubuntu SMP Thu Oct 22 09:41:40 UTC 2015 (Ubuntu 3.19.0-32.37~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 008fc00000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000083aecfff] usable
BIOS-e820: [mem 0x0000000083aed000-0x00000000842edfff] reserved
BIOS-e820: [mem 0x00000000842ee000-0x000000008f17efff] usable
BIOS-e820: [mem 0x000000008f17f000-0x000000008f97efff] reserved
BIOS-e820: [mem 0x000000008f97f000-0x000000008fb7efff] ACPI NVS
BIOS-e820: [mem 0x000000008fb7f000-0x000000008fbfefff] ACPI data
BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
BIOS-e820: [mem 0x000000008fc00000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000f0900000-0x00000000f09fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: HP HP Notebook/80CC, BIOS F.1F 12/01/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x22f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFF0000000 write-back
2 base 008FB47000 mask FFFFFFF000 uncachable
3 base 00FF800000 mask FFFF800000 write-protect
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000022f000000 aka 8944M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
init_memory_mapping: [mem 0x22ee00000-0x22effffff]
[mem 0x22ee00000-0x22effffff] page 2M
BRK [0x01fd7000, 0x01fd7fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x22edfffff]
[mem 0x220000000-0x22edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x83aecfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0x839fffff] page 2M
[mem 0x83a00000-0x83aecfff] page 4k
init_memory_mapping: [mem 0x842ee000-0x8f17efff]
[mem 0x842ee000-0x843fffff] page 4k
[mem 0x84400000-0x8effffff] page 2M
[mem 0x8f000000-0x8f17efff] page 4k
BRK [0x01fd8000, 0x01fd8fff] PGTABLE
BRK [0x01fd9000, 0x01fd9fff] PGTABLE
init_memory_mapping: [mem 0x8fbff000-0x8fbfffff]
[mem 0x8fbff000-0x8fbfffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x3482c000-0x3640dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x000000008FBD2188 0000CC (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x000000008FBFB000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: DSDT 0x000000008FBE8000 00E5B8 (v01 HPQOEM SLIC-MPC F0000000 ACPI 00040000)
ACPI: FACS 0x000000008FB04000 000040
ACPI: TCPA 0x000000008FBFD000 000032 (v02 HPQOEM 80CB 00000000 HP 00040000)
ACPI: UEFI 0x000000008FBFC000 000236 (v01 HPQOEM 80CB 00000001 HP 00040000)
ACPI: HPET 0x000000008FBFA000 000038 (v01 HPQOEM 80CB 00000001 HP 00040000)
ACPI: APIC 0x000000008FBF9000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MCFG 0x000000008FBF8000 00003C (v01 HPQOEM 80CB 00000001 HP 00040000)
ACPI: ASF! 0x000000008FBF7000 0000A5 (v32 HPQOEM 80CB 00000001 HP 00040000)
ACPI: BOOT 0x000000008FBE7000 000028 (v01 HPQOEM 80CB 00000001 HP 00040000)
ACPI: FPDT 0x000000008FBE5000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: MSDM 0x000000008FBE4000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
ACPI: SSDT 0x000000008FBE3000 000CB4 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBDE000 0048A6 (v02 HPQOEM 80CB 00000002 ACPI 00040000)
ACPI: SSDT 0x000000008FBDD000 00041A (v01 HPQOEM 80CB 00001000 ACPI 00040000)
ACPI: TPM2 0x000000008FBDC000 000044 (v03 HPQOEM 80CB 20505350 HP 00040000)
ACPI: SSDT 0x000000008FBDB000 000692 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBDA000 000418 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBD8000 001760 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBD7000 00082B (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBD6000 00008C (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBD4000 001153 (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: SSDT 0x000000008FBD1000 000F8A (v01 HPQOEM 80CB 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022effffff]
NODE_DATA(0) allocated [mem 0x22eff8000-0x22effcfff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x83aecfff]
node 0: [mem 0x842ee000-0x8f17efff]
node 0: [mem 0x8fbff000-0x8fbfffff]
node 0: [mem 0x100000000-0x22effffff]
Initmem setup node 0 [mem 0x00001000-0x22effffff]
On node 0 totalpages: 1825053
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 9062 pages used for memmap
DMA32 zone: 579967 pages, LIFO batch:31
Normal zone: 19392 pages used for memmap
Normal zone: 1241088 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x83aed000-0x842edfff]
PM: Registered nosave memory: [mem 0x8f17f000-0x8f97efff]
PM: Registered nosave memory: [mem 0x8f97f000-0x8fb7efff]
PM: Registered nosave memory: [mem 0x8fb7f000-0x8fbfefff]
PM: Registered nosave memory: [mem 0x8fc00000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xf08fffff]
PM: Registered nosave memory: [mem 0xf0900000-0xf09fffff]
PM: Registered nosave memory: [mem 0xf0a00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xd0000000-0xf08fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88022ec00000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1796514
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0x7c000000-0x7fffffff] (65536KB)
PM: Registered nosave memory: [mem 0x7c000000-0x7fffffff]
Memory: 7008288K/7300212K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 291924K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1000 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2196.126 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4392.25 BogoMIPS (lpj=8784504)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
ftrace: allocating 30021 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A8-7410 APU with AMD Radeon R5 Graphics (fam: 16, model: 30, stepping: 01)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (17569.00 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x8f97f000-0x8fb7efff] (2097152 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 3:51:30, date: 03/04/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff]
pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
pci 0000:00:01.0: [1002:9851] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 0x24: [mem 0xf0e00000-0xf0e3ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0e60000-0xf0e63fff 64bit]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
pci 0000:00:02.1: [1022:1439] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:02.5: [1022:1439] type 01 class 0x060400
pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0e40000-0xf0e5ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xf0a00000-0xf0afffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xf0e70000-0xf0e70fff]
pci 0000:00:08.0: reg 0x24: [mem 0xf0e6a000-0xf0e6bfff]
pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xf0e68000-0xf0e69fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf0e6f000-0xf0e6f3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xf0e6e000-0xf0e6e0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.0: reg 0x10: [mem 0xf0e6d000-0xf0e6d0ff]
pci 0000:00:13.0: supports D1 D2
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0e64000-0xf0e67fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
pci 0000:00:14.7: reg 0x10: [mem 0xf0e6c000-0xf0e6c0ff 64bit]
pci 0000:00:14.7: PME# supported from D3cold
pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
pci 0000:01:00.0: [1002:6660] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf0d00000-0xf0d3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.1: bridge window [mem 0xf0d00000-0xf0dfffff]
pci 0000:00:02.1: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf0c00000-0xf0c07fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0b00000-0xf0b00fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:02.5: PCI bridge to [bus 03]
pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
ACPI: IRQ 7 override to edge, high
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
platform MSFT0101:00: failed to claim resource 0
acpi MSFT0101:00: platform device creation failed: -16
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x83aed000-0x83ffffff]
e820: reserve RAM buffer [mem 0x8f17f000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x22f000000-0x22fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1efc PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] could not be reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xff800000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: address conflict with reserved [mem 0xff800000-0xffffffff]
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:01.0: BAR 6: assigned [mem 0xf0e80000-0xf0e9ffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf0d40000-0xf0d5ffff pref]
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1: bridge window [io 0x3000-0x3fff]
pci 0000:00:02.1: bridge window [mem 0xf0d00000-0xf0dfffff]
pci 0000:00:02.1: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.4: PCI bridge to [bus 02]
pci 0000:00:02.4: bridge window [mem 0xf0c00000-0xf0cfffff]
pci 0000:00:02.5: PCI bridge to [bus 03]
pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
pci 0000:00:02.5: bridge window [mem 0xf0b00000-0xf0bfffff]
pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xd0000000-0xf7ffffff]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0d00000-0xf0dfffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xf0c00000-0xf0cfffff]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xf0b00000-0xf0bfffff]
pci_bus 0000:03: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 28552K (ffff88003482c000 - ffff88003640e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8b17f000-0x8f17f000] (64MB) mapped at [ffff88008b17f000-ffff88008f17efff]
Simple Boot Flag at 0x44 set to 0x1
perf: AMD NB counters detected
perf: AMD L2I counters detected
microcode: CPU0: patch_level=0x07030105
microcode: CPU1: patch_level=0x07030105
microcode: CPU2: patch_level=0x07030105
microcode: CPU3: patch_level=0x07030105
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1488599491.180:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5632, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 4224k, total 4224k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TSZ0] (52 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TSZ2] (20 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:10.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:12.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xf0e6e000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:13.0: EHCI Host Controller
ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.0: debug port 2
ehci-pci 0000:00:13.0: irq 18, io mem 0xf0e6d000
ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
registered taskstats version 1
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 9:933:865
rtc_cmos 00:01: setting system clock to 2017-03-04 03:51:31 UTC (1488599491)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
ACPI: Battery Slot [BAT1] (battery present)
Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
systemd-udevd[126]: starting version 204
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
acpi device:0a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input6
wmi: Mapper loaded
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
sdhci-pci 0000:00:14.7: No vmmc regulator found
sdhci-pci 0000:00:14.7: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8106e at 0xffffc90004cdc000, fc:3f:db:37:43:cc, XID 04900000 IRQ 33
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f100 irq 31
ata2: SATA max UDMA/133 abar m1024@0xf0e6f000 port 0xf0e6f180 irq 31
usb 1-1: New USB device found, idVendor=03f0, idProduct=8911
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Deskjet 1050 J410 series
usb 1-1: Manufacturer: HP
usb 1-1: SerialNumber: CN28V1BKQ905QT
usb 3-1: New USB device found, idVendor=0438, idProduct=7900
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 4-1: New USB device found, idVendor=0438, idProduct=7900
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usb 4-1.1: new high-speed USB device number 3 using ehci-pci
usb 3-1.1: new low-speed USB device number 3 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0458, idProduct=003a
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: USB Optical Mouse
usb 3-1.1: Manufacturer: Genius
usb 4-1.1: New USB device found, idVendor=0bda, idProduct=57d6
usb 4-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 4-1.1: Product: HP Truevision HD
usb 4-1.1: Manufacturer: Generic
usb 4-1.1: SerialNumber: \x07DEWKP019I9OUTM
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Genius USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:0458:003A.0001/input/input8
hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius USB Optical Mouse] on usb-0000:00:12.0-1.1/input0
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: HGST HTS541010A9E680, JA0OA710, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATAPI: hp DVDRW GUB0N, UB00, max UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HGST HTS541010A9 A710 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM hp DVDRW GUB0N UB00 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2195.881 MHz
psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800, board id: 3127, fw id: 8526786
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
Switched to clocksource tsc
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
Adding 4000764k swap on /dev/sda5. Priority:-1 extents:1 across:4000764k FS
systemd-udevd[384]: starting version 204
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input9
MCE: In-kernel MCE decoding enabled.
AMD Cryptographic Coprocessor 0000:00:08.0: 4 command queues available
AMD Cryptographic Coprocessor 0000:00:08.0: enabled
EDAC MC: Ver: 3.0.0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\_SB_.PCI0.SMBS.SMB0) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
WARNING! power/level is deprecated; use power/control instead
device-mapper: multipath: version 1.7.0 loaded
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
kvm: disabled by bios
kvm: disabled by bios
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
kvm: disabled by bios
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Mic=0x19
sound hdaudioC1D0: Internal Mic=0x12
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
media: Linux media interface: v0.10
Linux video capture interface: v2.00
input: HP WMI hotkeys as /devices/virtual/input/input11
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
uvcvideo: Found UVC 1.00 device HP Truevision HD (0bda:57d6)
input: HP Truevision HD as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input14
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
init: failsafe main process (652) killed by TERM signal
init: cups main process (791) killed by HUP signal
init: cups main process ended, respawning
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[fglrx] Maximum main memory to use for locked dma buffers: 6660 MBytes.
[fglrx] vendor: 1002 device: 9851 revision: 45 count: 1
[fglrx] vendor: 1002 device: 6660 revision: 83 count: 2
[fglrx] ioport: bar 4, base 0x4000, size: 0x100
[fglrx] ioport: bar 4, base 0x3000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 15.20.3 [Sep 8 2015] with 2 minors
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
usblp 1-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x8911
usbcore: registered new interface driver usblp
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1204) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:03:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: samba-ad-dc main process (1167) terminated with status 1
[fglrx] Firegl kernel thread PID: 1419
[fglrx] Firegl kernel thread PID: 1420
[fglrx] Firegl kernel thread PID: 1421
[fglrx] IRQ 42 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fab4000, size:4000
[fglrx] Reserved FB block: Unshared offset:fab8000, size:548000
[fglrx] Reserved FB block: Unshared offset:3ffdd000, size:23000
[fglrx] Firegl kernel thread PID: 1511
[fglrx] Firegl kernel thread PID: 1512
[fglrx] Firegl kernel thread PID: 1513
[fglrx] IRQ 43 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000
[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000
[fglrx] Reserved FB block: Unshared offset:7fff3000, size:d000
[fglrx] ATIF platform detected with notification ID: 0xd0
[fglrx] IRQ 43 Disabled
init: plymouth-stop pre-start process (1537) terminated with status 1
usblp0: removed
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
Did not find alt setting 1 for intf 0, config 1
usb 1-1: USB disconnect, device number 2
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
[fglrx] IRQ 42 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 576.148 msecs
PM: late suspend of devices complete after 0.752 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.355 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
fglrx_pci 0000:01:00.0: Refused to change power state, currently in D3
ehci-pci 0000:00:12.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.659 msecs
PM: early resume of devices complete after 0.380 msecs
r8169 0000:03:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 42 Enabled
fglrx_pci 0000:01:00.0: Refused to change power state, currently in D3
rtc_cmos 00:01: System wakeup disabled by ACPI
r8169 0000:03:00.0 eth0: link down
usb 4-1.1: reset high-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 627.043 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/133
usb 3-1.4: new full-speed USB device number 4 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=216d
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.4: Product: BCM43142A0
usb 3-1.4: Manufacturer: Broadcom Corp
usb 3-1.4: SerialNumber: 606DC7EBF2B8
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
[fglrx] warning: device has been powered off before takedown
r8169 0000:03:00.0 eth0: link up
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
usbcore: registered new interface driver btusb
bluetooth hci0: Direct firmware load for brcm/BCM43142A0-0a5c-216d.hcd failed with error -2
Bluetooth: hci0: BCM: patch brcm/BCM43142A0-0a5c-216d.hcd not found
usb 1-2: new high-speed USB device number 3 using xhci_hcd
usb 1-2: New USB device found, idVendor=058f, idProduct=6387
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Mass Storage
usb 1-2: Manufacturer: Generic
usb 1-2: SerialNumber: 3A2E3652
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host2: usb-storage 1-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 4
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 7884800 512-byte logical blocks: (4.03 GB/3.75 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sdb: detected capacity change from 4037017600 to 0
usb 1-2: USB disconnect, device number 3
usb 1-2: new high-speed USB device number 4 using xhci_hcd
usb 1-2: New USB device found, idVendor=abcd, idProduct=1234
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: UDisk
usb 1-2: Manufacturer: General
usb 1-2: SerialNumber: 1403112256046913779605
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host3: usb-storage 1-2:1.0
scsi 3:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdb] 7884800 512-byte logical blocks: (4.03 GB/3.75 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 3:0:0:0: [sdb] No Caching mode page found
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI removable disk
sdb: detected capacity change from 4037017600 to 0
usb 1-2: USB disconnect, device number 4
usb 1-2: new high-speed USB device number 5 using xhci_hcd
usb 1-2: New USB device found, idVendor=13fe, idProduct=4223
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB DISK Pro
usb 1-2: Manufacturer:
usb 1-2: SerialNumber: 900063EF9ACD4F68
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-2:1.0
scsi 4:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 6
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 30289920 512-byte logical blocks: (15.5 GB/14.4 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sdb] No Caching mode page found
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 10 00 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 4096
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 10 00 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 4096
Buffer I/O error on dev sdb1, logical block 256, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 18 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2072
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 18 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2072
Buffer I/O error on dev sdb1, logical block 3, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 18 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2072
Buffer I/O error on dev sdb1, logical block 3, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 18 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2072
Buffer I/O error on dev sdb1, logical block 3, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 18 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2072
Buffer I/O error on dev sdb1, logical block 3, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 38 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2104
Buffer I/O error on dev sdb1, logical block 7, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 38 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2104
Buffer I/O error on dev sdb1, logical block 7, async page read
sd 4:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 4:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 4:0:0:0: [sdb] Add. Sense: Medium not present
sd 4:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 08 38 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 2104
Buffer I/O error on dev sdb1, logical block 7, async page read
Buffer I/O error on dev sdb1, logical block 7, async page read
Buffer I/O error on dev sdb1, logical block 15, async page read
sdb: detected capacity change from 15508439040 to 0
usb 1-2: USB disconnect, device number 5
usb 1-2: new high-speed USB device number 6 using xhci_hcd
usb 1-2: New USB device found, idVendor=125f, idProduct=c82a
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: ADATA USB Flash Drive
usb 1-2: Manufacturer: ADATA
usb 1-2: SerialNumber: AA04012700007792
usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-2:1.0
scsi 5:0:0:0: Direct-Access ADATA USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] 15851520 512-byte logical blocks: (8.11 GB/7.55 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 43 00 00 00
sd 5:0:0:0: [sdb] No Caching mode page found
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sdb: detected capacity change from 8115978240 to 0
usb 1-2: USB disconnect, device number 6
usb 1-2: new high-speed USB device number 7 using xhci_hcd
usb 1-2: New USB device found, idVendor=1908, idProduct=1320
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: Mass storage
usb 1-2: Manufacturer: Generic
usb 1-2: SerialNumber: SN4832920653
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-2:1.0
scsi 6:0:0:0: Direct-Access Generic Flash Disk 1.0a PQ: 0 ANSI: 2
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 7989248 512-byte logical blocks: (4.09 GB/3.80 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
usb 1-2: USB disconnect, device number 7
usb 1-2: new high-speed USB device number 8 using xhci_hcd
usb 1-2: New USB device found, idVendor=0930, idProduct=6545
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB Flash Memory
usb 1-2: Manufacturer:
usb 1-2: SerialNumber: 00D0C9CCDEFDEE4100000856
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host7: usb-storage 1-2:1.0
scsi 7:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdb] 30489408 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 7:0:0:0: [sdb] Write Protect is off
sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 7:0:0:0: [sdb] No Caching mode page found
sd 7:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 7:0:0:0: [sdb] Attached SCSI removable disk
scsi_io_completion: 40 callbacks suppressed
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 01 47 00 00 08 00
blk_update_request: 40 callbacks suppressed
blk_update_request: I/O error, dev sdb, sector 327
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 01 47 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 327
buffer_io_error: 38 callbacks suppressed
Buffer I/O error on dev sdb1, logical block 132, async page read
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 01 49 00 00 06 00
blk_update_request: I/O error, dev sdb, sector 329
Buffer I/O error on dev sdb1, logical block 133, async page read
Buffer I/O error on dev sdb1, logical block 134, async page read
Buffer I/O error on dev sdb1, logical block 135, async page read
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 02 3f 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 575
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 02 3f 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 575
Buffer I/O error on dev sdb1, logical block 256, async page read
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 02 41 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 577
Buffer I/O error on dev sdb1, logical block 257, async page read
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 02 43 00 00 04 00
blk_update_request: I/O error, dev sdb, sector 579
Buffer I/O error on dev sdb1, logical block 258, async page read
Buffer I/O error on dev sdb1, logical block 259, async page read
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 5f 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 95
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 5f 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 95
Buffer I/O error on dev sdb1, logical block 16, async page read
sd 7:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 7:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 7:0:0:0: [sdb] Add. Sense: Medium not present
sd 7:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 61 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 97
Buffer I/O error on dev sdb1, logical block 17, async page read
sdb: detected capacity change from 15610576896 to 0
usb 1-2: USB disconnect, device number 8
usb 3-1.1: USB disconnect, device number 3
usb 3-1.1: new high-speed USB device number 5 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0cf3, idProduct=9271
usb 3-1.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 3-1.1: Product: USB2.0 WLAN
usb 3-1.1: Manufacturer: ATHEROS
usb 3-1.1: SerialNumber: 12345
usb 3-1.1: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
usb 3-1.1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
ath9k_htc 3-1.1:1.0: ath9k_htc: HTC initialized with 33 credits
ath9k_htc 3-1.1:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy1: Atheros AR9271 Rev:1
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
usb 3-1.1: USB disconnect, device number 5
ath: phy1: RX failed to go idle in 10 ms RXSM=0x481579f9
ath: phy1: Failed to wakeup in 500us
ath: phy1: RX failed to go idle in 10 ms RXSM=0x481579f9
usb 3-1.1: ath9k_htc: USB layer deinitialized
usb 3-1.1: new low-speed USB device number 6 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0458, idProduct=003a
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: USB Optical Mouse
usb 3-1.1: Manufacturer: Genius
input: Genius USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:0458:003A.0002/input/input15
hid-generic 0003:0458:003A.0002: input,hidraw0: USB HID v1.11 Mouse [Genius USB Optical Mouse] on usb-0000:00:12.0-1.1/input0
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
[fglrx] IRQ 42 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 567.974 msecs
PM: late suspend of devices complete after 0.513 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.610 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 39
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:12.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ehci-pci 0000:00:13.0: System wakeup disabled by ACPI
fglrx_pci 0000:01:00.0: Refused to change power state, currently in D3
PM: noirq resume of devices complete after 17.627 msecs
PM: early resume of devices complete after 0.325 msecs
[fglrx] Power up the ASIC
r8169 0000:03:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 42 Enabled
rtc_cmos 00:01: System wakeup disabled by ACPI
fglrx_pci 0000:01:00.0: Refused to change power state, currently in D3
r8169 0000:03:00.0 eth0: link down
usb 4-1.1: reset high-speed USB device number 3 using ehci-pci
usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
PM: resume of devices complete after 642.372 msecs
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4308 at /build/linux-lts-vivid-naHA4g/linux-lts-vivid-3.19.0/drivers/base/firmware_class.c:1126 _request_firmware+0xb47/0xb90()
Modules linked in: arc4 ath9k_htc ath9k_common ath9k_hw ath mac80211 nls_iso8859_1 uas usb_storage btusb usblp bnep rfcomm bluetooth fglrx(POE) uvcvideo videobuf2_vmalloc wl(POE) videobuf2_memops videobuf2_core v4l2_common videodev media snd_hda_codec_realtek hp_wmi sparse_keymap snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_controller snd_hda_codec kvm snd_hwdep snd_pcm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_seq_midi snd_seq_midi_event snd_rawmidi cfg80211 snd_seq aesni_intel snd_seq_device aes_x86_64 lrw snd_timer gf128mul glue_helper ablk_helper joydev dm_multipath serio_raw snd cryptd soundcore scsi_dh amd_iommu_v2 i2c_piix4 k10temp fam15h_power shpchp edac_core ccp edac_mce_amd hp_wireless mac_hid binfmt_misc parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid r8169 ahci psmouse mii sdhci_pci sdhci libahci wmi video
CPU: 1 PID: 4308 Comm: kworker/u9:0 Tainted: P OE 3.19.0-32-generic #37~14.04.1-Ubuntu
Hardware name: HP HP Notebook/80CC, BIOS F.1F 12/01/2015
Workqueue: hci0 hci_power_on [bluetooth]
ffffffff81b0fc80 ffff88007787bb78 ffffffff817af41b ffffffff81c54578
0000000000000000 ffff88007787bbb8 ffffffff81074daa ffffffff8150830a
ffff88007787bcd0 00000000fffffff5 ffff8802253a2f40 ffff880207101d80
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] ? _request_firmware+0x5a/0xb90
[] warn_slowpath_null+0x1a/0x20
[] _request_firmware+0xb47/0xb90
[] request_firmware+0x35/0x50
[] btusb_setup_bcm_patchram+0x89/0x570 [btusb]
[] ? rpm_idle+0xd6/0x230
[] hci_dev_do_open+0xe1/0xa80 [bluetooth]
[] hci_power_on+0x40/0x200 [bluetooth]
[] process_one_work+0x14f/0x400
[] worker_thread+0x118/0x510
[] ? rescuer_thread+0x3d0/0x3d0
[] kthread+0xd2/0xf0
[] ? kthread_create_on_node+0x1c0/0x1c0
[] ret_from_fork+0x58/0x90
[] ? kthread_create_on_node+0x1c0/0x1c0
---[ end trace bbd5d19e4b4b2893 ]---
bluetooth hci0: firmware: brcm/BCM43142A0-0a5c-216d.hcd will not be loaded
Bluetooth: hci0: BCM: patch brcm/BCM43142A0-0a5c-216d.hcd not found
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/133
psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
[fglrx] warning: device has been powered off before takedown
r8169 0000:03:00.0 eth0: link up
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
r8169 0000:03:00.0 eth0: link down
usb 3-1.1: USB disconnect, device number 6
usb 3-1.1: new high-speed USB device number 7 using ehci-pci
usb 3-1.1: New USB device found, idVendor=abcd, idProduct=1234
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: UDisk
usb 3-1.1: Manufacturer: General
usb 3-1.1: SerialNumber: 1403112256046913779605
usb-storage 3-1.1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 3-1.1:1.0
scsi 8:0:0:0: Direct-Access General UDisk 5.00 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] 7884800 512-byte logical blocks: (4.03 GB/3.75 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 8:0:0:0: [sdb] No Caching mode page found
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 8:0:0:0: [sdb] Attached SCSI removable disk
sdb: detected capacity change from 4037017600 to 0
usb 3-1.1: USB disconnect, device number 7
usb 3-1.1: new high-speed USB device number 8 using ehci-pci
usb 3-1.1: New USB device found, idVendor=1908, idProduct=1320
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: Mass storage
usb 3-1.1: Manufacturer: Generic
usb 3-1.1: SerialNumber: SN4832920653
usb-storage 3-1.1:1.0: USB Mass Storage device detected
scsi host9: usb-storage 3-1.1:1.0
scsi 9:0:0:0: Direct-Access Generic Flash Disk 1.0a PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdb] 7989248 512-byte logical blocks: (4.09 GB/3.80 GiB)
sd 9:0:0:0: [sdb] Write Protect is off
sd 9:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 9:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sdb1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (sdb1): mounted filesystem without journal. Opts: (null)
usb 3-1.1: USB disconnect, device number 8
scsi_io_completion: 7 callbacks suppressed
sd 9:0:0:0: [sdb] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 9:0:0:0: [sdb] CDB:
Write(10): 2a 00 00 4c 88 06 00 00 02 00
blk_update_request: 7 callbacks suppressed
blk_update_request: I/O error, dev sdb, sector 5015558
buffer_io_error: 10 callbacks suppressed
Buffer I/O error on dev sdb1, logical block 2506755, lost async page write
sd 9:0:0:0: [sdb] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 9:0:0:0: [sdb] CDB:
Write(10): 2a 00 00 53 88 06 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 5474310
Buffer I/O error on dev sdb1, logical block 2736131, lost async page write
usb 3-1.1: new low-speed USB device number 9 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0458, idProduct=003a
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: USB Optical Mouse
usb 3-1.1: Manufacturer: Genius
input: Genius USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:0458:003A.0003/input/input16
hid-generic 0003:0458:003A.0003: input,hidraw0: USB HID v1.11 Mouse [Genius USB Optical Mouse] on usb-0000:00:12.0-1.1/input0
usb 3-1.1: USB disconnect, device number 9
usb 3-1.1: new high-speed USB device number 10 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0930, idProduct=6545
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: USB Flash Memory
usb 3-1.1: Manufacturer:
usb 3-1.1: SerialNumber: 00D0C9CCDEFDEE4100000856
usb-storage 3-1.1:1.0: USB Mass Storage device detected
scsi host10: usb-storage 3-1.1:1.0
scsi 10:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 4
sd 10:0:0:0: Attached scsi generic sg2 type 0
sd 10:0:0:0: [sdb] 30489408 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 10:0:0:0: [sdb] No Caching mode page found
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 4f 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 79
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 4f 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 79
Buffer I/O error on dev sdb1, logical block 8, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 51 00 00 06 00
blk_update_request: I/O error, dev sdb, sector 81
Buffer I/O error on dev sdb1, logical block 9, async page read
Buffer I/O error on dev sdb1, logical block 10, async page read
Buffer I/O error on dev sdb1, logical block 11, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 bf 00 00 08 00
blk_update_request: I/O error, dev sdb, sector 191
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 bf 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 191
Buffer I/O error on dev sdb1, logical block 64, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 c1 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 193
Buffer I/O error on dev sdb1, logical block 65, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 c3 00 00 04 00
blk_update_request: I/O error, dev sdb, sector 195
Buffer I/O error on dev sdb1, logical block 66, async page read
Buffer I/O error on dev sdb1, logical block 67, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 bf 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 191
Buffer I/O error on dev sdb1, logical block 64, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 c1 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 193
Buffer I/O error on dev sdb1, logical block 65, async page read
sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 10:0:0:0: [sdb] Add. Sense: Medium not present
sd 10:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 c3 00 00 04 00
blk_update_request: I/O error, dev sdb, sector 195
sdb: detected capacity change from 15610576896 to 0
usb 3-1.1: USB disconnect, device number 10
usb 3-1.1: new high-speed USB device number 11 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0930, idProduct=6545
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: USB Flash Memory
usb 3-1.1: Manufacturer:
usb 3-1.1: SerialNumber: 00D0C9CCDEFDEE4100000856
usb-storage 3-1.1:1.0: USB Mass Storage device detected
scsi host11: usb-storage 3-1.1:1.0
scsi 11:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 4
sd 11:0:0:0: Attached scsi generic sg2 type 0
usb 3-1.1: USB disconnect, device number 11
sd 11:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 11:0:0:0: [sdb] Sense not available.
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 2e 2e 2f 2e
sd 11:0:0:0: [sdb] No Caching mode page found
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Read Capacity(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 11:0:0:0: [sdb] Sense not available.
sd 11:0:0:0: [sdb] Attached SCSI removable disk
usb 3-1.1: new low-speed USB device number 12 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0458, idProduct=003a
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: USB Optical Mouse
usb 3-1.1: Manufacturer: Genius
input: Genius USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:0458:003A.0004/input/input17
hid-generic 0003:0458:003A.0004: input,hidraw0: USB HID v1.11 Mouse [Genius USB Optical Mouse] on usb-0000:00:12.0-1.1/input0
systemd-hostnamed[5908]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 3-1.1: USB disconnect, device number 12
usb 3-1.1: new high-speed USB device number 13 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0930, idProduct=6545
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.1: Product: USB Flash Memory
usb 3-1.1: Manufacturer:
usb 3-1.1: SerialNumber: 00D0C9CCDEFDEE4100000856
usb-storage 3-1.1:1.0: USB Mass Storage device detected
scsi host12: usb-storage 3-1.1:1.0
scsi 12:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 4
sd 12:0:0:0: Attached scsi generic sg2 type 0
sd 12:0:0:0: [sdb] 30489408 512-byte logical blocks: (15.6 GB/14.5 GiB)
sd 12:0:0:0: [sdb] Write Protect is off
sd 12:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 12:0:0:0: [sdb] No Caching mode page found
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 12:0:0:0: [sdb] Attached SCSI removable disk
scsi_io_completion: 72 callbacks suppressed
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 77 00 00 08 00
blk_update_request: 72 callbacks suppressed
blk_update_request: I/O error, dev sdb, sector 119
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 77 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 119
buffer_io_error: 98 callbacks suppressed
Buffer I/O error on dev sdb1, logical block 28, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 79 00 00 06 00
blk_update_request: I/O error, dev sdb, sector 121
Buffer I/O error on dev sdb1, logical block 29, async page read
Buffer I/O error on dev sdb1, logical block 30, async page read
Buffer I/O error on dev sdb1, logical block 31, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 77 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 119
Buffer I/O error on dev sdb1, logical block 28, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 79 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 121
Buffer I/O error on dev sdb1, logical block 29, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 7b 00 00 04 00
blk_update_request: I/O error, dev sdb, sector 123
Buffer I/O error on dev sdb1, logical block 30, async page read
Buffer I/O error on dev sdb1, logical block 31, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 77 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 119
Buffer I/O error on dev sdb1, logical block 28, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 79 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 121
Buffer I/O error on dev sdb1, logical block 29, async page read
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 7b 00 00 04 00
blk_update_request: I/O error, dev sdb, sector 123
sd 12:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 12:0:0:0: [sdb] Sense Key : Not Ready [current]
sd 12:0:0:0: [sdb] Add. Sense: Medium not present
sd 12:0:0:0: [sdb] CDB:
Read(10): 28 00 00 00 00 77 00 00 02 00
blk_update_request: I/O error, dev sdb, sector 119
sdb: detected capacity change from 15610576896 to 0
usb 3-1.1: USB disconnect, device number 13
usb 3-1.1: new low-speed USB device number 14 using ehci-pci
usb 3-1.1: New USB device found, idVendor=0458, idProduct=003a
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.1: Product: USB Optical Mouse
usb 3-1.1: Manufacturer: Genius
input: Genius USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:0458:003A.0005/input/input18
hid-generic 0003:0458:003A.0005: input,hidraw0: USB HID v1.11 Mouse [Genius USB Optical Mouse] on usb-0000:00:12.0-1.1/input0
perf interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
r8169 0000:03:00.0 eth0: link up
atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e058 ' to make it known.
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
cfg80211: Calling CRDA to update world regulatory domain
[fglrx] IRQ 42 Disabled
[fglrx] Preparing suspend fglrx in kernel.
[fglrx] Suspending fglrx in kernel completed.
[fglrx] Power down the ASIC .
PM: suspend of devices complete after 583.344 msecs
PM: late suspend of devices complete after 0.521 msecs
r8169 0000:03:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:13.0: System wakeup enabled by ACPI
ehci-pci 0000:00:12.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.612 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
CPU3 is up
ACPI: Waking up from system sleep state S3
fglrx_pci 0000:01:00.0: Refused to change power state, currently in D3
ehci-pci 0000:00:13.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:10.0: System wakeup disabled by ACPI
ehci-pci 0000:00:12.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 17.487 msecs
PM: early resume of devices complete after 0.326 msecs
r8169 0000:03:00.0: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
[fglrx] Power up the ASIC
[fglrx] Preparing resume fglrx in kernel.
[fglrx] Resuming fglrx in kernel completed.
[fglrx] IRQ 42 Enabled
fglrx_pci 0000:01:00.0: Refused to change power state, currently in D3
rtc_cmos 00:01: System wakeup disabled by ACPI
r8169 0000:03:00.0 eth0: link down
usb 4-1.1: reset high-speed USB device number 3 using ehci-pci
usb 3-1.4: reset full-speed USB device number 4 using ehci-pci
PM: resume of devices complete after 634.573 msecs
------------[ cut here ]------------
WARNING: CPU: 0 PID: 7636 at /build/linux-lts-vivid-naHA4g/linux-lts-vivid-3.19.0/drivers/base/firmware_class.c:1126 _request_firmware+0xb47/0xb90()
Modules linked in: arc4 ath9k_htc ath9k_common ath9k_hw ath mac80211 nls_iso8859_1 uas usb_storage btusb usblp bnep rfcomm bluetooth fglrx(POE) uvcvideo videobuf2_vmalloc wl(POE) videobuf2_memops videobuf2_core v4l2_common videodev media snd_hda_codec_realtek hp_wmi sparse_keymap snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel snd_hda_controller snd_hda_codec kvm snd_hwdep snd_pcm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_seq_midi snd_seq_midi_event snd_rawmidi cfg80211 snd_seq aesni_intel snd_seq_device aes_x86_64 lrw snd_timer gf128mul glue_helper ablk_helper joydev dm_multipath serio_raw snd cryptd soundcore scsi_dh amd_iommu_v2 i2c_piix4 k10temp fam15h_power shpchp edac_core ccp edac_mce_amd hp_wireless mac_hid binfmt_misc parport_pc ppdev lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid r8169 ahci psmouse mii sdhci_pci sdhci libahci wmi video
CPU: 0 PID: 7636 Comm: kworker/u9:0 Tainted: P W OE 3.19.0-32-generic #37~14.04.1-Ubuntu
Hardware name: HP HP Notebook/80CC, BIOS F.1F 12/01/2015
Workqueue: hci0 hci_power_on [bluetooth]
ffffffff81b0fc80 ffff88006fd9bb78 ffffffff817af41b ffffffff81c54578
0000000000000000 ffff88006fd9bbb8 ffffffff81074daa ffffffff8150830a
ffff88006fd9bcd0 00000000fffffff5 ffff8801a0b09a20 ffff8802073e8600
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] ? _request_firmware+0x5a/0xb90
[] warn_slowpath_null+0x1a/0x20
[] _request_firmware+0xb47/0xb90
[] request_firmware+0x35/0x50
[] btusb_setup_bcm_patchram+0x89/0x570 [btusb]
[] ? rpm_idle+0xd6/0x230
[] hci_dev_do_open+0xe1/0xa80 [bluetooth]
[] hci_power_on+0x40/0x200 [bluetooth]
[] process_one_work+0x14f/0x400
[] worker_thread+0x118/0x510
[] ? rescuer_thread+0x3d0/0x3d0
[] kthread+0xd2/0xf0
[] ? kthread_create_on_node+0x1c0/0x1c0
[] ret_from_fork+0x58/0x90
[] ? kthread_create_on_node+0x1c0/0x1c0
---[ end trace bbd5d19e4b4b2894 ]---
bluetooth hci0: firmware: brcm/BCM43142A0-0a5c-216d.hcd will not be loaded
Bluetooth: hci0: BCM: patch brcm/BCM43142A0-0a5c-216d.hcd not found
PM: Finishing wakeup.
Restarting tasks ... done.
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/133
psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846]
psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..]
video LNXVIDEO:00: Restoring backlight state
video LNXVIDEO:01: Restoring backlight state
[fglrx] warning: device has been powered off before takedown
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
systemd-hostnamed[8852]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
r8169 0000:03:00.0 eth0: link up