dmesg - iotwst
Linux version 4.8.0-39-generic (buildd@lgw01-22) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #42~16.04.1-Ubuntu SMP Mon Feb 20 15:06:07 UTC 2017 (Ubuntu 4.8.0-39.42~16.04.1-generic 4.8.17)
Command line: BOOT_IMAGE=/vmlinuz-4.8.0-39-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007aa27fff] usable
BIOS-e820: [mem 0x000000007aa28000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Google sentry/sentry, BIOS 08/19/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x17f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 007AF00000 mask 7FFFF00000 uncachable
1 base 007B800000 mask 7FFF800000 uncachable
2 base 007C000000 mask 7FFC000000 uncachable
3 base 0080000000 mask 7FC0000000 uncachable
4 base 00C0000000 mask 7FF0000000 write-combining
5 base 00D0000000 mask 7FF0000000 uncachable
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7aa28 max_arch_pfn = 0x400000000
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9f7880099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x5723c000, 0x5723cfff] PGTABLE
BRK [0x5723d000, 0x5723dfff] PGTABLE
BRK [0x5723e000, 0x5723efff] PGTABLE
BRK [0x5723f000, 0x5723ffff] PGTABLE
BRK [0x57240000, 0x57240fff] PGTABLE
RAMDISK: [mem 0x3309c000-0x35845fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4A50 000024 (v02 CORE )
ACPI: XSDT 0x000000007AB650E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x000000007AB69B00 0000F4 (v05 CORE COREBOOT 00000000 CORE 00000001)
ACPI: DSDT 0x000000007AB65250 0048AC (v05 COREv4 COREBOOT 20110725 INTL 20130117)
ACPI: FACS 0x000000007AB65210 000040
ACPI: FACS 0x000000007AB65210 000040
ACPI: SSDT 0x000000007AB69C00 000594 (v02 CORE COREBOOT 0000002A CORE 0000002A)
ACPI: MCFG 0x000000007AB6A1A0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: TCPA 0x000000007AB6A1E0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x000000007AB6A220 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: NHLT 0x000000007AB6A280 003187 (v05 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HPET 0x000000007AB6F410 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017effffff]
NODE_DATA(0) allocated [mem 0x17eff9000-0x17effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000017effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007aa27fff]
node 0: [mem 0x0000000100000000-0x000000017effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000017effffff]
On node 0 totalpages: 1022406
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7785 pages used for memmap
DMA32 zone: 498216 pages, LIFO batch:31
Normal zone: 8128 pages used for memmap
Normal zone: 520192 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7aa28000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfcffffff]
PM: Registered nosave memory: [mem 0xfd000000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff9f79fec00000 s107864 r8192 d31400 u1048576
pcpu-alloc: s107864 r8192 d31400 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006408
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-39-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3898052K/4089624K available (8833K kernel code, 1441K rwdata, 3836K rodata, 1552K init, 1296K bss, 191572K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:33024 nr_irqs:512 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Detected 1600.000 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3216.00 BogoMIPS (lpj=6432000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 8 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff8ceee000 - ffffffff8cef6000)
ftrace: allocating 33460 entries in 131 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 1
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Celeron(R) CPU 3855U @ 1.60GHz (family: 0x6, model: 0x4e, stepping: 0x3)
Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (6432.00 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 23:10:08, date: 02/26/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S2 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000001-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x800000000-0xbffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1906] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1c00-0x1c3f]
pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xd1120000-0xd1127fff 64bit]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd1100000-0xd110ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xd1130000-0xd1130fff 64bit]
pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xd1131000-0xd1131fff 64bit]
pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xd1132000-0xd1132fff 64bit]
pci 0000:00:19.0: [8086:9d66] type 00 class 0x118000
pci 0000:00:19.0: reg 0x10: [mem 0xd1134000-0xd1134fff 64bit]
pci 0000:00:19.0: reg 0x18: [mem 0xd1135000-0xd1135fff 64bit]
pci 0000:00:19.2: [8086:9d64] type 00 class 0x118000
pci 0000:00:19.2: reg 0x10: [mem 0xd1136000-0xd1136fff 64bit]
pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xd1137000-0xd1137fff 64bit]
pci 0000:00:1e.4: [8086:9d2b] type 00 class 0x080501
pci 0000:00:1e.4: reg 0x10: [mem 0xd1138000-0xd1138fff 64bit]
pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501
pci 0000:00:1e.6: reg 0x10: [mem 0xd1139000-0xd1139fff 64bit]
pci 0000:00:1f.0: [8086:9d43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xd1128000-0xd112bfff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040100
pci 0000:00:1f.3: reg 0x10: [mem 0xd112c000-0xd112ffff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xd1110000-0xd111ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xd113b000-0xd113b0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:00:1f.5: [8086:9d24] type 00 class 0x000000
pci 0000:00:1f.5: reg 0x10: [mem 0xd113a000-0xd113afff]
pci 0000:01:00.0: [8086:095b] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1001fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd10fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 12 14 15) *0
ACPI Error: No handler for Region [EMEM] (ffff9f79fa0a6630) [EmbeddedControl] (20160422/evregion-166)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160422/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9f79fa0a7fc8), AE_NOT_EXIST (20160422/psparse-542)
ACPI Exception: AE_NOT_EXIST, from region _REG, [EmbeddedControl] (20160422/evregion-397)
ACPI : EC: EC stopped
ACPI : EC: GPE = 0x50, I/O: command/status = 0x66, data = 0x62
ACPI : EC: EC started
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7aa28000-0x7bffffff]
e820: reserve RAM buffer [mem 0x17f000000-0x17fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:00: [mem 0xff000000-0xffffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x1800-0x18fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0900-0x09fe] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0200] has been reserved
system 00:04: [io 0x0204] has been reserved
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0880-0x08ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd10fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
pci_bus 0000:00: resource 20 [mem 0x80000001-0xdfffffff window]
pci_bus 0000:00: resource 21 [mem 0x800000000-0xbffffffff window]
pci_bus 0000:00: resource 22 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: resource 23 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd10fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 40616K (ffff9f78b309c000 - ffff9f78b5846000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x76a28000-0x7aa28000] (64MB) mapped at [ffff9f78f6a28000-ffff9f78faa27fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1488150608.180:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc979c0800000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x4E
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
ACPI: Battery Slot [BAT0] (battery present)
tpm_tis 00:06: 1.2 TPM (device-id 0x1B, rev-id 16)
tpm tpm0: [Firmware Bug]: TPM interrupt not working, polling instead
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-39-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-39-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc rtc0: invalid alarm value: 2017-2-26 23:10:64
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x406e3, pf=0x80, revision=0x8a
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b676cc7c62663677ffcdd31b57807ddf29735766'
zswap: loaded using pool lzo/zbud
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
usb 1-3: new full-speed USB device number 2 using xhci_hcd
random: fast init done
usb 1-3: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
tsc: Refined TSC clocksource calibration: 1607.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x172da68deef, max_idle_ns: 440795285945 ns
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=04e8, idProduct=61f3
usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-2: Product: Portable SSD T3
usb 2-2: Manufacturer: Samsung
usb 2-2: SerialNumber: 123456792A3B
evm: HMAC attrs: 0x1
Magic number: 5:985:201
rtc_cmos 00:02: setting system clock to 2017-02-26 23:10:10 UTC (1488150610)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1552K (ffffffff8cd6a000 - ffffffff8ceee000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1392K (ffff9f78d68a4000 - ffff9f78d6a00000)
Freeing unused kernel memory: 260K (ffff9f78d6dbf000 - ffff9f78d6e00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
usbcore: registered new interface driver usb-storage
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[drm] Initialized drm 1.1.0 20060810
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:00:1e.4: SDHCI controller found [8086:9d2b] (rev 21)
scsi host0: uas
usbcore: registered new interface driver uas
mmc0: SDHCI controller on PCI [0000:00:1e.4] using ADMA 64-bit
sdhci-pci 0000:00:1e.6: SDHCI controller found [8086:9d2d] (rev 21)
sdhci-pci 0000:00:1e.6: failed to setup card detect gpio
scsi 0:0:0:0: Direct-Access Samsung Portable SSD T3 0 PQ: 0 ANSI: 6
mmc1: SDHCI controller on PCI [0000:00:1e.6] using ADMA 64-bit
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 410000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
usb 1-7: new high-speed USB device number 3 using xhci_hcd
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GuC firmware load skipped
usb 1-7: New USB device found, idVendor=1bcf, idProduct=2c82
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: Integrated Camera
usb 1-7: Manufacturer: SunplusIT Inc
usb 1-7: SerialNumber: 8SSC20F26991L1GZ65R0AAB
mmc0: new HS400 MMC card at address 0001
mmcblk0: mmc0:0001 SDW16G 14.7 GiB
mmcblk0boot0: mmc0:0001 SDW16G partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 SDW16G partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 SDW16G partition 3 4.00 MiB
mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
[drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
clocksource: Switched to clocksource tsc
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[drm] RC6 on
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Kernel Socket.
random: crng init done
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[266]: Received request to flush runtime journal from PID 1
chromeos ramoops using acpi device.
idma64 idma64.0: Found Intel integrated DMA 64-bit
idma64 idma64.1: Found Intel integrated DMA 64-bit
idma64 idma64.4: Found Intel integrated DMA 64-bit
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
media: Linux media interface: v0.10
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
Bluetooth: hci0: read Intel version: 370810225019140f00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-22.50.19.14.f.bseq
uvcvideo: Found UVC 1.00 device Integrated Camera (1bcf:2c82)
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
iwlwifi 0000:01:00.0: loaded firmware version 22.361476.0 op_mode iwlmvm
uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
SSE version of gcm_enc/dec engaged.
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
i2c-RAYD0001:00 supply avdd not found, using dummy regulator
i2c-RAYD0001:00 supply vccio not found, using dummy regulator
raydium_ts i2c-RAYD0001:00: nothing at this address
dw-apb-uart.2: ttyS4 at MMIO 0xd1134000 (irq = 32, base_baud = 7500000) is a 16550A
dw-apb-uart.4: ttyS5 at MMIO 0xd1137000 (irq = 20, base_baud = 115200) is a 16550A
i2c-ELAN0000:00 supply vcc not found, using dummy regulator
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
nau8825 i2c-10508825:00: No 'mclk' clock found, assume MCLK is managed externally
Adding 4091900k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:4091900k SSFS
input: Elan Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-7/i2c-ELAN0000:00/input/input8
audit: type=1400 audit(1488150619.979:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=862 comm="apparmor_parser"
audit: type=1400 audit(1488150619.979:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=862 comm="apparmor_parser"
audit: type=1400 audit(1488150619.979:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=862 comm="apparmor_parser"
audit: type=1400 audit(1488150619.979:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=862 comm="apparmor_parser"
audit: type=1400 audit(1488150619.983:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=861 comm="apparmor_parser"
audit: type=1400 audit(1488150619.983:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=861 comm="apparmor_parser"
audit: type=1400 audit(1488150619.991:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=865 comm="apparmor_parser"
audit: type=1400 audit(1488150619.991:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=865 comm="apparmor_parser"
audit: type=1400 audit(1488150619.999:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=863 comm="apparmor_parser"
audit: type=1400 audit(1488150619.999:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=863 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp1s0: authenticate with d8:50:e6:cf:92:74
wlp1s0: send auth to d8:50:e6:cf:92:74 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with d8:50:e6:cf:92:74 (try 1/3)
wlp1s0: RX AssocResp from d8:50:e6:cf:92:74 (capab=0x1011 status=0 aid=1)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
EXT4-fs (mmcblk0p3): couldn't mount RDWR because of unsupported optional features (ff000000)
EXT4-fs (mmcblk0p8): recovery complete
EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (mmcblk0p1): recovery complete
EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: snapd.refresh.timer: Adding 4h 53min 20.148709s random time.
systemd[1]: snapd.refresh.timer: Adding 5h 8min 34.285534s random time.
systemd[1]: snapd.refresh.timer: Adding 1h 57min 33.791030s random time.
systemd[1]: snapd.refresh.timer: Adding 1h 49min 1.607004s random time.
systemd[1]: snapd.refresh.timer: Adding 5h 56min 59.641504s random time.
wlp1s0: deauthenticating from d8:50:e6:cf:92:74 by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: authenticate with d8:50:e6:cf:92:74
wlp1s0: send auth to d8:50:e6:cf:92:74 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with d8:50:e6:cf:92:74 (try 1/3)
wlp1s0: RX AssocResp from d8:50:e6:cf:92:74 (capab=0x1011 status=0 aid=1)
wlp1s0: associated
EXT4-fs (mmcblk0p5): couldn't mount RDWR because of unsupported optional features (ff000000)
EXT4-fs (mmcblk0p3): couldn't mount RDWR because of unsupported optional features (ff000000)
wlp1s0: deauthenticating from d8:50:e6:cf:92:74 by local choice (Reason: 3=DEAUTH_LEAVING)
wlp1s0: authenticate with d8:50:e6:cf:92:74
wlp1s0: send auth to d8:50:e6:cf:92:74 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with d8:50:e6:cf:92:74 (try 1/3)
wlp1s0: RX AssocResp from d8:50:e6:cf:92:74 (capab=0x1011 status=0 aid=1)
wlp1s0: associated
perf: interrupt took too long (2529 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
mmc1: error -123 whilst initialising SD card
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x00000000 | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x000001aa | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x0000081a | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x00000502 | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x00000502 | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x00000502 | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x00000502 | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x0000371a | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x0000371a | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x0000371a | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x0000371a | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: Timeout waiting for hardware cmd interrupt.
sdhci: =========== REGISTER DUMP (mmc1)===========
sdhci: Sys addr: 0x00000000 | Version: 0x00001002
sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci: Present: 0x000f0001 | Host ctl: 0x00000001
sdhci: Power: 0x0000000e | Blk gap: 0x00000080
sdhci: Wake-up: 0x00000000 | Clock: 0x00004e47
sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci: Caps: 0x7568c881 | Caps_1: 0x00000807
sdhci: Cmd: 0x00000102 | Max curr: 0x00000000
sdhci: Host ctl2: 0x00000000
sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x0000000000000000
sdhci: ===========================================
mmc1: new ultra high speed SDR104 SDXC card at address aaaa
mmcblk1: mmc1:aaaa SL128 119 GiB
mmcblk1: p1 p2 p3
input: D0:13:FD:93:72:B5 as /devices/virtual/input/input9
input: D0:13:FD:93:72:B5 as /devices/virtual/input/input10
perf: interrupt took too long (3185 > 3161), lowering kernel.perf_event_max_sample_rate to 62750
perf: interrupt took too long (3986 > 3981), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4997 > 4982), lowering kernel.perf_event_max_sample_rate to 40000
NET: Registered protocol family 38