dmesg - 4790k
microcode: microcode updated early to revision 0x20, date = 2016-03-16
Linux version 4.9.12-desktop-2.mga6 ([email protected]) (gcc version 5.4.0 (GCC) ) #1 SMP Fri Feb 24 11:46:37 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000009becefff] usable
BIOS-e820: [mem 0x000000009becf000-0x000000009bed5fff] ACPI NVS
BIOS-e820: [mem 0x000000009bed6000-0x000000009c333fff] usable
BIOS-e820: [mem 0x000000009c334000-0x000000009c7ebfff] reserved
BIOS-e820: [mem 0x000000009c7ec000-0x00000000bda58fff] usable
BIOS-e820: [mem 0x00000000bda59000-0x00000000bddc4fff] reserved
BIOS-e820: [mem 0x00000000bddc5000-0x00000000bdde2fff] ACPI data
BIOS-e820: [mem 0x00000000bdde3000-0x00000000be30bfff] ACPI NVS
BIOS-e820: [mem 0x00000000be30c000-0x00000000beffefff] reserved
BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: ASUS All Series/SABERTOOTH Z97 MARK 1, BIOS 2702 10/27/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x43f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF0000000 write-back
3 base 0430000000 mask 7FF8000000 write-back
4 base 0438000000 mask 7FFC000000 write-back
5 base 043C000000 mask 7FFE000000 write-back
6 base 043E000000 mask 7FFF000000 write-back
7 base 00C0000000 mask 7FC0000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8a0-0x000fd8af] mapped at [ffff9669c00fd8a0]
Base memory trampoline at [ffff9669c0097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x2d6f62000, 0x2d6f62fff] PGTABLE
BRK [0x2d6f63000, 0x2d6f63fff] PGTABLE
BRK [0x2d6f64000, 0x2d6f64fff] PGTABLE
BRK [0x2d6f65000, 0x2d6f65fff] PGTABLE
BRK [0x2d6f66000, 0x2d6f66fff] PGTABLE
BRK [0x2d6f67000, 0x2d6f67fff] PGTABLE
BRK [0x2d6f68000, 0x2d6f68fff] PGTABLE
BRK [0x2d6f69000, 0x2d6f69fff] PGTABLE
BRK [0x2d6f6a000, 0x2d6f6afff] PGTABLE
BRK [0x2d6f6b000, 0x2d6f6bfff] PGTABLE
BRK [0x2d6f6c000, 0x2d6f6cfff] PGTABLE
RAMDISK: [mem 0x36f5a000-0x377a4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BDDCB088 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BDDDA9E8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000BDDCB1A0 00F842 (v02 ALASKA A M I 00000011 INTL 20120711)
ACPI: FACS 0x00000000BE30BF80 000040
ACPI: APIC 0x00000000BDDDAAF8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BDDDAB90 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000BDDDABD8 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDDDB858 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000BDDDBD98 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000BDDDC910 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000BDDDC950 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000BDDDC988 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000BDDDCCF8 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: DMAR 0x00000000BDDE2710 000080 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: UEFI 0x00000000BDDE26C8 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043effffff]
NODE_DATA(0) allocated [mem 0x43effc000-0x43effffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000009becefff]
node 0: [mem 0x000000009bed6000-0x000000009c333fff]
node 0: [mem 0x000000009c7ec000-0x00000000bda58fff]
node 0: [mem 0x00000000befff000-0x00000000beffffff]
node 0: [mem 0x0000000100000000-0x000000043effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
On node 0 totalpages: 4179255
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 12055 pages used for memmap
DMA32 zone: 771483 pages, LIFO batch:31
Normal zone: 53184 pages used for memmap
Normal zone: 3403776 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x9becf000-0x9bed5fff]
PM: Registered nosave memory: [mem 0x9c334000-0x9c7ebfff]
PM: Registered nosave memory: [mem 0xbda59000-0xbddc4fff]
PM: Registered nosave memory: [mem 0xbddc5000-0xbdde2fff]
PM: Registered nosave memory: [mem 0xbdde3000-0xbe30bfff]
PM: Registered nosave memory: [mem 0xbe30c000-0xbeffefff]
PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff966dfec00000 s106584 r8192 d32680 u262144
pcpu-alloc: s106584 r8192 d32680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113931
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16363316K/16717020K available (7468K kernel code, 1220K rwdata, 3256K rodata, 1404K init, 796K bss, 353704K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:4352 nr_irqs:488 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3999.565 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7999.13 BogoMIPS (lpj=3999565)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160831
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff83e92000 - ffffffff83e99000)
ftrace: allocating 28590 entries in 112 pages
smpboot: Max logical packages: 2
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x000000bdd51000 end: 0x000000bdd5efff
DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfed90000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64019.33 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9becf000-0x9bed5fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xbdde3000-0xbe30bfff] (5410816 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
xor: automatically using best checksumming function avx
pinctrl core: initialized pinctrl subsystem
RTC time: 21:27:50, date: 02/26/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
raid6: sse2x1 gen() 14054 MB/s
raid6: sse2x1 xor() 10996 MB/s
raid6: sse2x2 gen() 17523 MB/s
raid6: sse2x2 xor() 11968 MB/s
raid6: sse2x4 gen() 20570 MB/s
raid6: sse2x4 xor() 14369 MB/s
raid6: avx2x1 gen() 27550 MB/s
raid6: avx2x2 gen() 31671 MB/s
raid6: avx2x4 gen() 37324 MB/s
raid6: using algorithm avx2x4 gen() 37324 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF966DEBCDA000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI : EC: EC started
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf320000-0xdf32ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf336000-0xdf33600f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xdf334000-0xdf334fff]
pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdf333000-0xdf3333ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8c98] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdf332000-0xdf3323ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf331000-0xdf3317ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf330000-0xdf3300ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:1b80] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1b21:1184] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 03-07]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:01.0: [1b21:1184] type 01 class 0x060400
pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
pci 0000:04:05.0: [1b21:1184] type 01 class 0x060400
pci 0000:04:05.0: PME# supported from D0 D3hot D3cold
pci 0000:04:07.0: [1b21:1184] type 01 class 0x060400
pci 0000:04:07.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:05.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:07:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:07:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:07:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:07:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:07:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:07:00.0: reg 0x24: [mem 0xdf200000-0xdf2001ff]
pci 0000:04:07.0: PCI bridge to [bus 07]
pci 0000:04:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:08:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xdf100000-0xdf107fff 64bit]
pci 0000:08:00.0: PME# supported from D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x9becf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9c334000-0x9fffffff]
e820: reserve RAM buffer [mem 0xbda59000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf000000-0xbfffffff]
e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: [io 0x02a0-0x02af] has been reserved
system 00:04: [io 0x0a00-0x0aff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xdffe0000-0xdffeffff] has been reserved
system 00:06: [mem 0xdfff0000-0xdfffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:04:01.0: PCI bridge to [bus 05]
pci 0000:04:05.0: PCI bridge to [bus 06]
pci 0000:04:07.0: PCI bridge to [bus 07]
pci 0000:04:07.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:07.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:03:00.0: PCI bridge to [bus 04-07]
pci 0000:03:00.0: bridge window [io 0xd000-0xdfff]
pci 0000:03:00.0: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.3: PCI bridge to [bus 03-07]
pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xc0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:07: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:08: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
PCI: CLS mismatch (64 != 128), using 64 bytes
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8492K (ffff9669f6f5a000 - ffff9669f77a5000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xb9a59000-0xbda59000] (64MB) mapped at [ffff966a79a59000-ffff966a7da58fff]
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1488144469.771:1): initialized
workingset: timestamp_bits=56 max_order=22 bucket_order=0
zbud: loaded
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v8r6 (with cgroups support)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf331000 port 0xdf331100 irq 30
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xdf331000 port 0xdf331200 irq 30
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xdf331000 port 0xdf331300 irq 30
ata6: DUMMY
ahci 0000:07:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:07:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:07:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200100 irq 31
ata8: SATA max UDMA/133 abar m512@0xdf200000 port 0xdf200180 irq 31
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
Key type dns_resolver registered
mpls_gso: MPLS GSO support
microcode: sig=0x306c3, pf=0x2, revision=0x20
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
Magic number: 5:85:501
rtc_cmos 00:02: setting system clock to 2017-02-26 21:27:50 UTC (1488144470)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: OCZ-VERTEX4, 1.5, max UDMA/133
ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.5 PQ: 0 ANSI: 5
ata3.00: supports DRM functions and may not be fully accessible
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff966dee0f2c80), AE_NOT_FOUND (20160831/psparse-543)
ata5.00: ATAPI: PIONEER BD-RW BDR-209M, 1.10, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff966dee0f2c80), AE_NOT_FOUND (20160831/psparse-543)
ata5.00: configured for UDMA/100
ata3.00: NCQ Send/Recv Log not supported
ata3.00: ATA-9: Samsung SSD 850 EVO 1TB, EMT01B6Q, max UDMA/133
ata3.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata3.00: supports DRM functions and may not be fully accessible
ata3.00: NCQ Send/Recv Log not supported
ata3.00: configured for UDMA/133
sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
scsi 4:0:0:0: CD-ROM PIONEER BD-RW BDR-209M 1.10 PQ: 0 ANSI: 5
ata8: SATA link down (SStatus 0 SControl 300)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1404K (ffffffff83d33000 - ffffffff83e92000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 708K (ffff966c9674f000 - ffff966c96800000)
Freeing unused kernel memory: 840K (ffff966c96b2e000 - ffff966c96c00000)
dracut: dracut-044
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
dracut: Starting plymouth daemon
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
wmi: Mapper loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdf333000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.9.12-desktop-2.mga6 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdf332000
sr 4:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.9.12-desktop-2.mga6 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.9.12-desktop-2.mga6 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.9.12-desktop-2.mga6 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:08:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.9.12-desktop-2.mga6 xhci-hcd
usb usb5: SerialNumber: 0000:08:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.9.12-desktop-2.mga6 xhci-hcd
usb usb6: SerialNumber: 0000:08:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 3999.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7350b459580, max_idle_ns: 881591204237 ns
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 3-5: new full-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-5: New USB device found, idVendor=1e7d, idProduct=3750
usb 3-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-5: Product: KAVE XTD Headset
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: KAVE XTD Headset as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.3/0003:1E7D:3750.0001/input/input4
hid-generic 0003:1E7D:3750.0001: input,hidraw0: USB HID v1.00 Device [KAVE XTD Headset] on usb-0000:00:14.0-5/input3
usb 5-1: New USB device found, idVendor=0bda, idProduct=2838
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: RTL2838UHIDIR
usb 5-1: Manufacturer: Realtek
usb 5-1: SerialNumber: 00000001
usb 3-6: new full-speed USB device number 3 using xhci_hcd
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
random: fast init done
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
usb 5-2: new full-speed USB device number 3 using xhci_hcd
usb 3-6: New USB device found, idVendor=1e7d, idProduct=2e22
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-6: Product: ROCCAT Kone XTD
usb 3-6: Manufacturer: ROCCAT
input: ROCCAT ROCCAT Kone XTD as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1E7D:2E22.0002/input/input5
koneplus 0003:1E7D:2E22.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [ROCCAT ROCCAT Kone XTD] on usb-0000:00:14.0-6/input0
input: ROCCAT ROCCAT Kone XTD as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.1/0003:1E7D:2E22.0003/input/input6
koneplus 0003:1E7D:2E22.0003: input,hidraw2: USB HID v1.11 Keyboard [ROCCAT ROCCAT Kone XTD] on usb-0000:00:14.0-6/input1
usb 5-2: New USB device found, idVendor=0cf3, idProduct=3005
usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-9: new full-speed USB device number 4 using xhci_hcd
usb 3-9: New USB device found, idVendor=28de, idProduct=1142
usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9: Product: Steam Controller
usb 3-9: Manufacturer: Valve Software
input: Valve Software Steam Controller as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:28DE:1142.0004/input/input7
clocksource: Switched to clocksource tsc
hid-generic 0003:28DE:1142.0004: input,hidraw3: USB HID v1.11 Keyboard [Valve Software Steam Controller] on usb-0000:00:14.0-9/input0
hid-generic 0003:28DE:1142.0005: hiddev0,hidraw4: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-9/input1
hid-generic 0003:28DE:1142.0006: hiddev0,hidraw5: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-9/input2
hid-generic 0003:28DE:1142.0007: hiddev0,hidraw6: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-9/input3
hid-generic 0003:28DE:1142.0008: hiddev0,hidraw7: USB HID v1.11 Device [Valve Software Steam Controller] on usb-0000:00:14.0-9/input4
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
dracut: Mounted root filesystem /dev/sda1
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
usb 3-13: new full-speed USB device number 5 using xhci_hcd
NET: Registered protocol family 10
systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /etc/systemd/system/radeon-profile-daemon.service is marked executable. Please remove executable permission bits. Proceeding anyway.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
audit: type=1130 audit(1488144472.893:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
audit: type=1130 audit(1488144472.904:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 3-13: New USB device found, idVendor=1e7d, idProduct=2fda
usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-13: Product: ROCCAT Ryos MK FX
usb 3-13: Manufacturer: ROCCAT
input: ROCCAT ROCCAT Ryos MK FX as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:1E7D:2FDA.0009/input/input8
audit: type=1130 audit(1488144472.909:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Non-volatile memory driver v1.3
EXT4-fs (sda1): re-mounted. Opts: (null)
audit: type=1130 audit(1488144472.913:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Installing knfsd (copyright (C) 1996 [email protected]).
audit: type=1130 audit(1488144472.927:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
systemd-journald[552]: Received request to flush runtime journal from PID 1
audit: type=1130 audit(1488144472.948:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144472.950:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144472.951:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144472.953:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
hid-generic 0003:1E7D:2FDA.0009: input,hidraw8: USB HID v1.11 Keyboard [ROCCAT ROCCAT Ryos MK FX] on usb-0000:00:14.0-13/input0
input: ROCCAT ROCCAT Ryos MK FX as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:1E7D:2FDA.000A/input/input9
fuse init (API version 7.26)
vboxguest: loading out-of-tree module taints kernel.
vboxguest: PCI device not found, probably running on physical hardware.
vboxguest: PCI device not found, probably running on physical hardware.
hid-generic 0003:1E7D:2FDA.000A: input,hiddev0,hidraw9: USB HID v1.11 Pointer [ROCCAT ROCCAT Ryos MK FX] on usb-0000:00:14.0-13/input1
input: ROCCAT ROCCAT Ryos MK FX as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.2/0003:1E7D:2FDA.000B/input/input10
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
hid-generic 0003:1E7D:2FDA.000B: input,hidraw10: USB HID v1.11 Keypad [ROCCAT ROCCAT Ryos MK FX] on usb-0000:00:14.0-13/input2
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12
asus_wmi: Number of fans: 1
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Adding 4191456k swap on /dev/sda5. Priority:-1 extents:1 across:4191456k SSFS
usb 5-1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usbcore: registered new interface driver btusb
usb 3-5: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 3-5: [9] FU [Mic Playback Volume] ch = 2, val = -6144/1921/1
usb 3-5: Warning! Unlikely big volume range (=8065), cval->res is probably wrong.
usb 3-5: [11] FU [Line Playback Volume] ch = 2, val = -6144/1921/1
e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
usb 3-5: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 3-5: [8] FU [Mic Capture Volume] ch = 2, val = -4096/2832/1
usb 3-5: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 3-5: [15] FU [Line Capture Volume] ch = 2, val = -4096/2832/1
usb 3-5: Warning! Unlikely big volume range (=6928), cval->res is probably wrong.
usb 3-5: [2] FU [PCM Capture Volume] ch = 2, val = -4096/2832/1
usbcore: registered new interface driver snd-usb-audio
usb 5-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
DVB: registering new adapter (Realtek RTL2832U reference design)
i2c i2c-0: Added multiplexed i2c bus 1
rtl2832 0-0010: Realtek RTL2832 successfully attached
usb 5-1: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
r820t 1-001a: creating new instance
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
r820t 1-001a: Rafael Micro r820t successfully identified
media: Linux media interface: v0.10
Linux video capture interface: v2.00
rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0
rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached
rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still slightly experimental and functionality changes may follow
Registered IR keymap rc-empty
input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1c.4/0000:08:00.0/usb5/5-1/rc/rc0/input13
rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:1c.4/0000:08:00.0/usb5/5-1/rc/rc0
usb 5-1: dvb_usb_v2: schedule remote query interval to 200 msecs
lirc_dev: IR Remote Control driver registered, major 243
rc rc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
IR LIRC bridge handler initialized
usb 5-1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
usbcore: registered new interface driver dvb_usb_rtl28xxu
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 40:16:7e:e8:e6:ab
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
i801_smbus 0000:00:1f.3: SPD Write Disable is set
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
e1000e 0000:00:19.0 eno1: renamed from eth0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 242
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 378.13 Tue Feb 7 20:10:06 PST 2017
(using threaded interrupts)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input17
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
audit_printk_skb: 81 callbacks suppressed
audit: type=1130 audit(1488144476.268:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mandriva-everytime comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.269:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=radeon-profile-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
random: crng init done
audit: type=1130 audit(1488144476.369:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=avahi-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.370:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.372:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=speech-dispatcherd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.372:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=atd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.373:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=smartd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.374:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.376:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=mandi comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144476.377:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=irqbalance comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
nct6775: Enabling hardware monitor logical device mappings.
nct6775: Found NCT6791D or compatible chip at 0x2e:0x290
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\_GPE.HWM) (20160831/utaddress-247)
ACPI: This conflict may cause random problems and system instability
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3999982791 Hz
vboxdrv: Successfully loaded version 5.1.12 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxguest: PCI device not found, probably running on physical hardware.
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
NET: Registered protocol family 17
IPv4: martian source 255.255.255.255 from 192.168.0.1, on dev eno1
ll header: 00000000: ff ff ff ff ff ff 74 d4 35 e5 f7 01 08 00 ......t.5.....
audit_printk_skb: 109 callbacks suppressed
audit: type=1130 audit(1488144485.705:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-wait-online comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144486.200:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=network comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
audit: type=1130 audit(1488144486.202:86): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=phoromatic-server comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144486.203:87): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=sshd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144486.203:88): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=phoromatic-client comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144486.217:89): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpcbind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144486.219:90): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpc-statd-notify comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1488144486.219:91): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rpc-statd-notify comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144486.221:92): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1101 audit(1488144486.230:93): pid=3000 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tcb acct="ldap" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 378.13 Tue Feb 7 18:30:08 PST 2017
nvidia-modeset: Allocated GPU:0 (GPU-ce2e921a-848c-d36b-a918-daf1816183a4) @ PCI:0000:01:00.0
snd_hda_codec_hdmi hdaudioC0D0: HDMI: invalid ELD data byte 9
audit_printk_skb: 96 callbacks suppressed
audit: type=1131 audit(1488144490.690:126): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1100 audit(1488144505.269:127): pid=3327 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_unix acct="pete" exe="/usr/libexec/sddm-helper" hostname=? addr=? terminal=? res=success'
audit: type=1101 audit(1488144505.269:128): pid=3327 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tcb acct="pete" exe="/usr/libexec/sddm-helper" hostname=? addr=? terminal=? res=success'
audit: type=1103 audit(1488144505.269:129): pid=3327 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_unix acct="pete" exe="/usr/libexec/sddm-helper" hostname=? addr=? terminal=? res=success'
audit: type=1101 audit(1488144505.274:130): pid=3328 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_tcb acct="pete" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1488144505.274:131): pid=3328 uid=0 old-auid=4294967295 auid=1001 tty=(none) old-ses=4294967295 ses=3 res=1
audit: type=1105 audit(1488144505.275:132): pid=3328 uid=0 auid=1001 ses=3 msg='op=PAM:session_open grantors=pam_loginuid,pam_keyinit,pam_limits,pam_systemd,pam_unix acct="pete" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488144505.284:133): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1001 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1006 audit(1488144505.284:134): pid=3327 uid=0 old-auid=4294967295 auid=1001 tty=(none) old-ses=4294967295 ses=4 res=1
audit: type=1105 audit(1488144505.285:135): pid=3327 uid=0 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_namespace,pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_loginuid acct="pete" exe="/usr/libexec/sddm-helper" hostname=? addr=? terminal=:0 res=success'
audit: type=1106 audit(1488144505.361:136): pid=3257 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="sddm" exe="/usr/libexec/sddm-helper" hostname=? addr=? terminal=:0 res=success'
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit_printk_skb: 12 callbacks suppressed
audit: type=1105 audit(1488144809.641:141): pid=4594 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144812.060:142): pid=4618 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144812.226:143): pid=4626 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144812.442:144): pid=4633 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144812.605:145): pid=4640 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144812.768:146): pid=4647 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144812.958:147): pid=4655 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1100 audit(1488144818.829:148): pid=4677 uid=1001 auid=1001 ses=4 msg='op=PAM:authentication grantors=pam_unix acct="pete" exe="/usr/lib/polkit-1/polkit-agent-helper-1" hostname=? addr=? terminal=? res=success'
audit: type=1101 audit(1488144818.830:149): pid=4677 uid=1001 auid=1001 ses=4 msg='op=PAM:accounting grantors=pam_tcb acct="pete" exe="/usr/lib/polkit-1/polkit-agent-helper-1" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488144818.838:150): pid=4672 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488145102.302:151): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnf-makecache comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1488145102.302:152): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dnf-makecache comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488145376.748:153): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1488145376.748:154): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145377.157:155): pid=5610 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145378.682:156): pid=5635 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145378.843:157): pid=5642 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145378.993:158): pid=5649 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145379.155:159): pid=5656 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145379.304:160): pid=5663 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
audit: type=1105 audit(1488145379.473:161): pid=5671 uid=1001 auid=1001 ses=4 msg='op=PAM:session_open grantors=pam_keyinit,pam_limits,pam_systemd,pam_unix,pam_xauth acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success'
upowerd[1952]: segfault at 20 ip 00007ffb206cae10 sp 00007fffe6ed38d8 error 4 in libglib-2.0.so.0.5000.3[7ffb20646000+111000]
audit: type=1701 audit(1488148168.486:162): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=1952 comm="upowerd" exe="/usr/libexec/upowerd" sig=11
audit: type=1131 audit(1488148168.487:163): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
audit: type=1130 audit(1488148168.704:164): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1488148168.704:165): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488148168.810:166): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
upowerd[14179]: segfault at 20 ip 00007f28603d8e10 sp 00007ffed5bfe8d8 error 4 in libglib-2.0.so.0.5000.3[7f2860354000+111000]
audit: type=1701 audit(1488148221.536:167): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=14179 comm="upowerd" exe="/usr/libexec/upowerd" sig=11
audit: type=1131 audit(1488148221.537:168): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
audit: type=1130 audit(1488148221.703:169): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1488148221.703:170): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1488148221.803:171): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'