dmesg - y2
microcode: CPU0 microcode updated early to revision 0xa0b, date = 2010-09-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-59-generic (buildd@lgw01-11) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #80-Ubuntu SMP Fri Jan 6 17:47:47 UTC 2017 (Ubuntu 4.4.0-59.80-generic 4.4.35)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f58ffff] usable
BIOS-e820: [mem 0x000000007f590000-0x000000007f5e2fff] ACPI NVS
BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data
BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: OEM OEM/G31MXP, BIOS 6.00 PG 01/09/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7f590 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 base 07F600000 mask FFFF00000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2039MB, range: 1MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
reg 3, base: 2038MB, range: 1MB, type UC
total RAM covered: 2038M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2038MB, range: 2MB, type UC
reg 2, base: 2040MB, range: 8MB, type UC
found SMP MP-table at [mem 0x000f3e00-0x000f3e0f] mapped at [ffff8800000f3e00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
BRK [0x0220f000, 0x0220ffff] PGTABLE
RAMDISK: [mem 0x33a70000-0x35d2ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F82D0 000024 (v02 IntelR)
ACPI: XSDT 0x000000007F5E3080 000054 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x000000007F5E8040 0000F4 (v03 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20150930/tbfadt-623)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20150930/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20150930/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20150930/tbfadt-704)
ACPI: DSDT 0x000000007F5E3200 004E13 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 0x000000007F590000 000040
ACPI: FACS 0x000000007F590000 000040
ACPI: HPET 0x000000007F5E8240 000038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 0x000000007F5E8280 00003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SLIC 0x000000007F5E82C0 000176 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 0x000000007F5E8140 000084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 0x000000007F5E8AA0 0007EF (v01 PmRef CpuPm 00003000 INTL 20041203)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007f58ffff]
NODE_DATA(0) allocated [mem 0x7f58b000-0x7f58ffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007f58ffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007f58ffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007f58ffff]
On node 0 totalpages: 521518
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8087 pages used for memmap
DMA32 zone: 517520 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88007f200000 s98264 r8192 d28712 u524288
pcpu-alloc: s98264 r8192 d28712 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 513346
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1998336K/2086072K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 87736K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:33024 nr_irqs:456 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2711.229 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5422.45 BogoMIPS (lpj=10844916)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b8000 - ffffffff820c0000)
ftrace: allocating 32064 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 2
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz (family: 0x6, model: 0x17, stepping: 0xa)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0xa0b, date = 2010-09-28
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10844.91 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7f590000-0x7f5e2fff] (339968 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 14:42:05, date: 02/21/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007C235C00 0002AE (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007C233E00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x7f600000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff]
pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 0x1c: [mem 0xfda00000-0xfdafffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0xfa00-0xfa0f]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907]
pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803]
pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707]
pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf50f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdbf8000-0xfdbfbfff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.1: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f590000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x0297] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 2]
pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
system 00:06: [io 0x0400-0x04bf] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:08: [mem 0x7f600000-0x7f6fffff] has been reserved
system 00:08: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:08: [mem 0x7f590000-0x7f5fffff] could not be reserved
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x00100000-0x7f58ffff] could not be reserved
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfed13000-0xfed1dfff] has been reserved
system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
system 00:08: [mem 0x000e0000-0x000effff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.1: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff]
pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0x7f600000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfd900000-0xfd9fffff]
pci_bus 0000:03: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:03: resource 7 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 8 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 9 [mem 0x7f600000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35584K (ffff880033a70000 - ffff880035d30000)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1487688125.736:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000400000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G33 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled--ignoring
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf900 ctl 0xf800 bmdma 0xf500 irq 19
ata4: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf508 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-59-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-59-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 6ffa6bfaa152a74cd2b6aa1e188cb999d8f5632b'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 5:721:738
rtc_cmos 00:01: setting system clock to 2017-02-21 14:42:06 UTC (1487688126)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata4.01: NODEV after polling detection
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
ata3.00: ATA-8: ST3500418AS, CC38, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/100
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 10 bits of entropy available)
[drm] Initialized drm 1.1.0 20060810
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc900003e0000, 90:fb:a6:eb:94:42, XID 083000c0 IRQ 26
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Memory usable by graphics device = 512M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
Floppy drive(s): fd0 is 1.44M
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] initialized overlay support
FDC 0 is a post-1991 82077
r8169 0000:02:00.0 enp2s0: renamed from eth0
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 3-2: new low-speed USB device number 2 using uhci_hcd
usb 3-2: New USB device found, idVendor=1c4f, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keykoard
usb 3-2: Manufacturer: USB
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1C4F:0002.0001/input/input5
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.1-2/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/0003:1C4F:0002.0002/input/input6
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.1-2/input1
tsc: Refined TSC clocksource calibration: 2711.236 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2714b4d4df4, max_idle_ns: 440795277116 ns
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
clocksource: Switched to clocksource tsc
random: nonblocking pool is initialized
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice System Slice.
systemd[1]: Started Read required files in advance.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Reached target Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Nameserver information manager.
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[221]: Received request to flush runtime journal from PID 1
intel_rng: FWH not detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO_) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k FS
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1487688138.625:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=663 comm="apparmor_parser"
audit: type=1400 audit(1487688138.625:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=663 comm="apparmor_parser"
audit: type=1400 audit(1487688138.625:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=663 comm="apparmor_parser"
audit: type=1400 audit(1487688138.625:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=663 comm="apparmor_parser"
audit: type=1400 audit(1487688138.637:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=665 comm="apparmor_parser"
audit: type=1400 audit(1487688138.653:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=662 comm="apparmor_parser"
audit: type=1400 audit(1487688138.653:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=662 comm="apparmor_parser"
audit: type=1400 audit(1487688138.677:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=666 comm="apparmor_parser"
audit: type=1400 audit(1487688138.693:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=667 comm="apparmor_parser"
audit: type=1400 audit(1487688138.693:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=667 comm="apparmor_parser"
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x1bd offMax=0x999
vboxdrv: TSC mode is Synchronous, tentative frequency 2711235994 Hz
vboxdrv: Successfully loaded version 5.1.12 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Non-volatile memory driver v1.3
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb 1-3: New USB device found, idVendor=0930, idProduct=6544
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: TransMemory
usb 1-3: Manufacturer: TOSHIBA
usb 1-3: SerialNumber: 9DE6CF3B3387CE406BFFF4DF
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
scsi 4:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
sd 4:0:0:0: [sdb] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: Attached scsi generic sg2 type 0
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 1-3: USB disconnect, device number 3
usb 1-3: new high-speed USB device number 4 using ehci-pci
usb 1-3: New USB device found, idVendor=0930, idProduct=6544
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: TransMemory
usb 1-3: Manufacturer: TOSHIBA
usb 1-3: SerialNumber: 9DE6CF3B3387CE406BFFF4DF
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host5: usb-storage 1-3:1.0
scsi 5:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
sd 5:0:0:0: [sdb] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
sd 5:0:0:0: Attached scsi generic sg2 type 0
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 5:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 5:0:0:0: [sdb] Attached SCSI removable disk
usb 3-2: USB disconnect, device number 2
usb 3-2: new low-speed USB device number 3 using uhci_hcd
usb 3-2: New USB device found, idVendor=1c4f, idProduct=0002
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Keykoard
usb 3-2: Manufacturer: USB
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1C4F:0002.0003/input/input12
hid-generic 0003:1C4F:0002.0003: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1d.1-2/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/0003:1C4F:0002.0004/input/input13
hid-generic 0003:1C4F:0002.0004: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1d.1-2/input1
usb 1-3: USB disconnect, device number 4
usb 1-3: new high-speed USB device number 6 using ehci-pci
usb 1-3: New USB device found, idVendor=0930, idProduct=6544
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: TransMemory
usb 1-3: Manufacturer: TOSHIBA
usb 1-3: SerialNumber: 9DE6CF3B3387CE406BFFF4DF
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-3:1.0
scsi 6:0:0:0: Direct-Access TOSHIBA TransMemory 1.00 PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 15155200 512-byte logical blocks: (7.76 GB/7.23 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 45 00 00 00
sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk