dmesg - IO

Return To IO System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-62-generic (buildd@lcy01-30) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 (Ubuntu 4.4.0-62.83-generic 4.4.40)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
tseg: 0000000000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e7000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cffaffff] usable
BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbffff] ACPI data
BIOS-e820: [mem 0x00000000cffc0000-0x00000000cffeffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68C-S UCC, BIOS P1.50 03/03/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000120000000 aka 4608M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x0220b000, 0x0220bfff] PGTABLE
BRK [0x0220c000, 0x0220cfff] PGTABLE
BRK [0x0220d000, 0x0220dfff] PGTABLE
BRK [0x0220e000, 0x0220efff] PGTABLE
RAMDISK: [mem 0x337f0000-0x35beffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB580 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000CFFB0000 000044 (v01 A_M_I  OEMRSDT  03001103 MSFT 00000097)
ACPI: FACP 0x00000000CFFB0200 000084 (v02 A_M_I  OEMFACP  12000601 MSFT 00000097)
ACPI: DSDT 0x00000000CFFB0460 00495C (v01 AS361  AS361143 00000143 INTL 20051117)
ACPI: FACS 0x00000000CFFC0000 000040
ACPI: APIC 0x00000000CFFB0390 000090 (v01 A_M_I  OEMAPIC  03001103 MSFT 00000097)
ACPI: MCFG 0x00000000CFFB0420 00003C (v01 A_M_I  OEMMCFG  03001103 MSFT 00000097)
ACPI: OEMB 0x00000000CFFC0040 000061 (v01 A_M_I  AMI_OEM  03001103 MSFT 00000097)
ACPI: SRAT 0x00000000CFFB4DC0 0000B8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: MSCT 0x00000000CFFB4E80 00004E (v01 A M I  OEMBOARD 00000001 AMD  00000001)
ACPI: AAFT 0x00000000CFFB4ED0 000027 (v01 A_M_I  OEMAAFT  03001103 MSFT 00000097)
ACPI: SSDT 0x00000000CFFB4F00 00023E (v01 A M I  POWERNOW 00000001 AMD  00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xdfffffff] -> [mem 0x00000000-0xdfffffff]
NUMA: Node 0 [mem 0x00000000-0xdfffffff] + [mem 0x100000000-0x11fffffff] -> [mem 0x00000000-0x11fffffff]
NODE_DATA(0) allocated [mem 0x11fff9000-0x11fffdfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000011fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000cffaffff]
  node   0: [mem 0x0000000100000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
On node 0 totalpages: 982862
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 13247 pages used for memmap
  DMA32 zone: 847792 pages, LIFO batch:31
  Normal zone: 2048 pages used for memmap
  Normal zone: 131072 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 6 CPUs, 5 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e6fff]
PM: Registered nosave memory: [mem 0x000e7000-0x000fffff]
PM: Registered nosave memory: [mem 0xcffb0000-0xcffbffff]
PM: Registered nosave memory: [mem 0xcffc0000-0xcffeffff]
PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88011fc00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 967482
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x96a0000000-0x96a1ffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3681904K/3931448K available (8436K kernel code, 1291K rwdata, 3960K rodata, 1488K init, 1316K bss, 249544K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:33024 nr_irqs:472 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2812.858 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.71 BogoMIPS (lpj=11251432)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
ftrace: allocating 32065 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 6
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: AMD Sempron(tm) 145 Processor (family: 0x10, model: 0x6, stepping: 0x3)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (5625.71 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcffc0000-0xcffeffff] (196608 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 17:28:06, date: 02/17/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
node 0 link 0: io port [1000, ffffff]
TOM: 00000000e0000000 aka 3584M
Fam 10h mmconf [mem 0xfc000000-0xfdffffff]
node 0 link 0: mmio [fc000000, fdffffff] ==> none
node 0 link 0: mmio [e0000000, fbffffff]
node 0 link 0: mmio [fe000000, fe0bffff]
node 0 link 0: mmio [a0000, bffff]
TOM2: 0000000120000000 aka 4608M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0xe0000000-0xfbffffff]
bus: 00 [mem 0xfe000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0x120000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xff37ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io  0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io  0xec00-0xec3f]
pci 0000:00:01.1: reg 0x20: [io  0x0600-0x063f]
pci 0000:00:01.1: reg 0x24: [io  0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xfbeff000-0xfbefffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xfbefec00-0xfbefecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 0x10: [mem 0xfbef8000-0xfbefbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 0x10: [mem 0xfbefd000-0xfbefdfff]
pci 0000:00:07.0: reg 0x14: [io  0xe480-0xe487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io  0xe400-0xe407]
pci 0000:00:08.0: reg 0x14: [io  0xe080-0xe083]
pci 0000:00:08.0: reg 0x18: [io  0xe000-0xe007]
pci 0000:00:08.0: reg 0x1c: [io  0xdc00-0xdc03]
pci 0000:00:08.0: reg 0x20: [io  0xd880-0xd88f]
pci 0000:00:08.0: reg 0x24: [mem 0xfbefc000-0xfbefcfff]
pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.1: reg 0x10: [io  0xd800-0xd807]
pci 0000:00:08.1: reg 0x14: [io  0xd480-0xd483]
pci 0000:00:08.1: reg 0x18: [io  0xd400-0xd407]
pci 0000:00:08.1: reg 0x1c: [io  0xd080-0xd083]
pci 0000:00:08.1: reg 0x20: [io  0xd000-0xd00f]
pci 0000:00:08.1: reg 0x24: [mem 0xfbef7000-0xfbef7fff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
pci 0000:00:0d.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:00:0d.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:0d.0: reg 0x1c: [mem 0xf9000000-0xf9ffffff 64bit]
pci 0000:00:0d.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:0a.0: [168c:002d] type 00 class 0x028000
pci 0000:01:0a.0: reg 0x10: [mem 0xfbff0000-0xfbffffff]
pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:04.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:04.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:04.0:   bridge window [mem 0xe0000000-0xff37ffff window] (subtractive decode)
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:00:0d.0
vgaarb: device added: PCI:0000:00:0d.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:0d.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcffb0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
clocksource: Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 3]
pnp 00:01: Plug and Play ACPI device, IDs PNP0401 (active)
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0500-0x057f] could not be reserved
system 00:02: [io  0x0580-0x05ff] has been reserved
system 00:02: [io  0x0800-0x087f] has been reserved
system 00:02: [io  0x0880-0x08ff] has been reserved
system 00:02: [io  0x0d00-0x0d7f] has been reserved
system 00:02: [io  0x0d80-0x0dff] has been reserved
system 00:02: [io  0x1100-0x117f] has been reserved
system 00:02: [io  0x1180-0x11ff] has been reserved
system 00:02: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:02: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:02: [mem 0x000de000-0x000dffff window] has been reserved
system 00:02: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:02: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:02: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:02: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io  0x0280-0x028f] has been reserved
system 00:05: [io  0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfc000000-0xfdffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:07: [mem 0xff380000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0:   bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xff37ffff window]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xe0000000-0xff37ffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 36864K (ffff8800337f0000 - ffff880035bf0000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1487352485.755:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xfbefec00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-62-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 23, io mem 0xfbeff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.4.0-62-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a630254739635d6fdc487c9f0afa5d9a0ff04f04'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 5:980:491
rtc_cmos 00:00: setting system clock to 2017-02-17 17:28:06 UTC (1487352486)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1488K (ffffffff81f44000 - ffffffff820b8000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1792K (ffff880001840000 - ffff880001a00000)
Freeing unused kernel memory: 136K (ffff880001dde000 - ffff880001e00000)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
pata_amd 0000:00:06.0: version 0.4.1
[drm] Initialized drm 1.1.0 20060810
scsi host0: pata_amd
Floppy drive(s): fd0 is 1.44M
scsi host1: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
wmi: Mapper loaded
ata2: port disabled--ignoring
usb 2-1: new low-speed USB device number 2 using ohci-pci
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:25:22:a8:74:ac
forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
forcedeth 0000:00:07.0 enp0s7: renamed from eth0
scsi host2: sata_nv
scsi host3: sata_nv
ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 20
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 20
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
scsi host4: sata_nv
scsi host5: sata_nv
ata5: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23
ata6: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23
ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
checking generic (e0000000 130000) vs hw (e0000000 10000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau 0000:00:0d.0: NVIDIA C61 (04c000a2)
nouveau 0000:00:0d.0: bios: version 05.61.32.28.01
nouveau 0000:00:0d.0: disp: dcb 1 type 4 unknown
nouveau 0000:00:0d.0: fb: 256 MiB of unknown memory type
[TTM] Zone  kernel: Available graphics memory: 1894068 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:00:0d.0: DRM: VRAM: 253 MiB
nouveau 0000:00:0d.0: DRM: GART: 512 MiB
nouveau 0000:00:0d.0: DRM: TMDS table version 1.1
nouveau 0000:00:0d.0: DRM: DCB version 3.0
nouveau 0000:00:0d.0: DRM: DCB outp 00: 01000310 00000023
nouveau 0000:00:0d.0: DRM: DCB outp 01: 00110204 942b0003
nouveau 0000:00:0d.0: DRM: DCB conn 00: 0000
nouveau 0000:00:0d.0: DRM: DCB conn 01: 1131
nouveau 0000:00:0d.0: DRM: DCB conn 02: 0110
nouveau 0000:00:0d.0: DRM: DCB conn 03: 0111
nouveau 0000:00:0d.0: DRM: DCB conn 04: 0113
nouveau 0000:00:0d.0: DRM: DCB type 4 not known
nouveau 0000:00:0d.0: DRM: Unknown-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:00:0d.0: DRM: MM: using M2MF for buffer copies
nouveau 0000:00:0d.0: DRM: allocated 1280x1024 fb: 0x9000, bo ffff8800cf021000
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:00:0d.0 on minor 0
usb 2-1: New USB device found, idVendor=1c4f, idProduct=0002
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: USB Keykoard
usb 2-1: Manufacturer: USB
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:1C4F:0002.0001/input/input5
hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:02.0-1/input0
input: USB USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/0003:1C4F:0002.0002/input/input6
hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:02.0-1/input1
tsc: Refined TSC clocksource calibration: 2812.791 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x288b741e855, max_idle_ns: 440795299375 ns
usb 2-6: new low-speed USB device number 3 using ohci-pci
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 2-6: device descriptor read/64, error -62
ata3.00: ATA-8: KINGSTON SV300S37A120G, 605ABBF2, max UDMA/133
ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 BBF2 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-6: device descriptor read/64, error -62
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS70  EX00 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg1 type 5
usb 2-6: new low-speed USB device number 4 using ohci-pci
usb 2-6: device descriptor read/64, error -62
clocksource: Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-6: device descriptor read/64, error -62
usb 2-6: new low-speed USB device number 5 using ohci-pci
usb 2-6: device not accepting address 5, error -62
usb 2-6: new low-speed USB device number 6 using ohci-pci
floppy0: no floppy controllers found
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
usb 2-6: device not accepting address 6, error -62
usb usb2-port6: unable to enumerate USB device
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Set console keymap...
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Starting Journal Service...
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Nameserver information manager.
lp0: using parport0 (interrupt-driven).
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[240]: Received request to flush runtime journal from PID 1
Floppy drive(s): fd0 is 1.44M
i2c i2c-4: nForce2 SMBus adapter at 0x600
i2c i2c-5: nForce2 SMBus adapter at 0x700
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
snd_hda_intel 0000:00:05.0: Disabling MSI
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
Adding 3999740k swap on /dev/sda2.  Priority:-1 extents:1 across:3999740k SSFS
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1705: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0:    inputs:
snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0:      Line=0x1b
snd_hda_codec_via hdaudioC0D0:      CD=0x1f
audit: type=1400 audit(1487352492.363:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1487352492.363:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=606 comm="apparmor_parser"
audit: type=1400 audit(1487352492.371:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1487352492.371:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1487352492.371:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1487352492.371:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=607 comm="apparmor_parser"
audit: type=1400 audit(1487352492.379:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=611 comm="apparmor_parser"
audit: type=1400 audit(1487352492.383:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=612 comm="apparmor_parser"
audit: type=1400 audit(1487352492.383:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=612 comm="apparmor_parser"
audit: type=1400 audit(1487352492.387:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=613 comm="apparmor_parser"
random: nonblocking pool is initialized
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
forcedeth 0000:00:07.0 enp0s7: MSI enabled
forcedeth 0000:00:07.0 enp0s7: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
floppy0: no floppy controllers found
nouveau 0000:00:0d.0: bus: MMIO write of 00540001 FAULT at 00b000
cfg80211: World regulatory domain updated:
cfg80211:  DFS Master region: unset
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ath: EEPROM regdomain: 0x809c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x52
ath: Country alpha2 being used: CN
ath: Regpair used: 0x52
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900008c0000, irq=19
ath9k 0000:01:0a.0 wlp1s10: renamed from wlan0
cfg80211: Regulatory domain changed to country: CN
cfg80211:  DFS Master region: FCC
cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlp1s10: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s10: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s10: link is not ready
Non-volatile memory driver v1.3
forcedeth 0000:00:07.0 enp0s7: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s7: link becomes ready
usb 2-5: new low-speed USB device number 7 using ohci-pci
usb 2-5: device descriptor read/64, error -62
usb 2-5: device descriptor read/64, error -62
usb 2-5: new low-speed USB device number 8 using ohci-pci
usb 2-5: device descriptor read/64, error -62
usb 2-5: device descriptor read/64, error -62
usb 2-5: new low-speed USB device number 9 using ohci-pci
usb 2-5: device not accepting address 9, error -62
usb 2-5: new low-speed USB device number 10 using ohci-pci
usb 2-5: device not accepting address 10, error -62
usb usb2-port5: unable to enumerate USB device
usb 2-6: new low-speed USB device number 11 using ohci-pci
usb 2-6: New USB device found, idVendor=2188, idProduct=0ae1
usb 2-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-6: Product:  USB OPTICAL MOUSE
input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0/0003:2188:0AE1.0003/input/input10
hid-generic 0003:2188:0AE1.0003: input,hidraw2: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-6/input0
usb 2-6: USB disconnect, device number 11
usb 2-2: new low-speed USB device number 12 using ohci-pci
usb 2-2: New USB device found, idVendor=13ee, idProduct=0003
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Optical Mouse
usb 2-2: Manufacturer: MosArt
input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:13EE:0003.0004/input/input11
hid-generic 0003:13EE:0003.0004: input,hidraw2: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:02.0-2/input0
nouveau 0000:00:0d.0: bus: MMIO write of 011a0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
usb 2-2: reset low-speed USB device number 12 using ohci-pci
usb 2-2: device descriptor read/64, error -62
nouveau 0000:00:0d.0: bus: MMIO write of 012b0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00ad0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00c50001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00ad0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00c50001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033d0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033f0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033d0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033f0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033d0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033f0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033d0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033f0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 03440001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 01340001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00b70001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 01340001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033a0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03400001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 03360001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 03360001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 03360001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 033e0001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033c0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03410001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 033f0001 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 03410001 FAULT at 00b020
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020

Return To IO System Information