dmesg - ef20
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.8-ckt7-ecs+ (root@H97M-E35) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04) ) #1 SMP Thu Jan 28 10:13:07 CST 2016 (Ubuntu 3.19.0-33.38~14.04.1-generic 3.19.8-ckt7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000007a97ffff] usable
BIOS-e820: [mem 0x000000007a980000-0x000000007ae37fff] reserved
BIOS-e820: [mem 0x000000007ae38000-0x000000007aec8fff] type 20
BIOS-e820: [mem 0x000000007aec9000-0x000000007b118fff] reserved
BIOS-e820: [mem 0x000000007b119000-0x000000007b218fff] ACPI NVS
BIOS-e820: [mem 0x000000007b219000-0x000000007b258fff] ACPI data
BIOS-e820: [mem 0x000000007b259000-0x000000007b277fff] usable
BIOS-e820: [mem 0x000000007b278000-0x000000007b278fff] reserved
BIOS-e820: [mem 0x000000007b279000-0x000000007b27bfff] usable
BIOS-e820: [mem 0x000000007b27c000-0x000000007b27cfff] reserved
BIOS-e820: [mem 0x000000007b27d000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c400000-0x000000007c7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
NX (Execute Disable) protection: active
efi: EFI v2.40 by Phoenix Technologies Ltd.
efi: ACPI=0x7b258000 ACPI 2.0=0x7b258014 SMBIOS=0x7b0fc000 ESRT=0x7aa71000
esrt: Reserving ESRT space from 0x000000007aa71000 to 0x000000007aa71038.
SMBIOS 2.7 present.
DMI: Intel Corp. EF20/EF20, BIOS CTT3EF20EAx.90A.0005.2016.0908.1433 09/08/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07E000000 mask FFE000000 uncachable
3 base 07D000000 mask FFF000000 uncachable
4 base 07C800000 mask FFF800000 uncachable
5 base 07C400000 mask FFFC00000 uncachable
6 disabled
7 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02fd4000, 0x02fd4fff] PGTABLE
BRK [0x02fd5000, 0x02fd5fff] PGTABLE
BRK [0x02fd6000, 0x02fd6fff] PGTABLE
init_memory_mapping: [mem 0x7a200000-0x7a3fffff]
[mem 0x7a200000-0x7a3fffff] page 2M
BRK [0x02fd7000, 0x02fd7fff] PGTABLE
init_memory_mapping: [mem 0x60000000-0x7a1fffff]
[mem 0x60000000-0x7a1fffff] page 2M
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x3fffffff]
[mem 0x20200000-0x3fffffff] page 2M
init_memory_mapping: [mem 0x7a400000-0x7a97ffff]
[mem 0x7a400000-0x7a7fffff] page 2M
[mem 0x7a800000-0x7a97ffff] page 4k
BRK [0x02fd8000, 0x02fd8fff] PGTABLE
init_memory_mapping: [mem 0x7b259000-0x7b277fff]
[mem 0x7b259000-0x7b277fff] page 4k
BRK [0x02fd9000, 0x02fd9fff] PGTABLE
init_memory_mapping: [mem 0x7b279000-0x7b27bfff]
[mem 0x7b279000-0x7b27bfff] page 4k
init_memory_mapping: [mem 0x7b27d000-0x7bffffff]
[mem 0x7b27d000-0x7b3fffff] page 4k
[mem 0x7b400000-0x7bffffff] page 2M
log_buf_len: 16777216 bytes
early log buf free: 256024(97%)
RAMDISK: [mem 0x3590e000-0x36c7efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007B258014 000024 (v02 ECSSYS)
ACPI: XSDT 0x000000007B2581E8 0000E4 (v01 ECSSYS ECSPRDCT 00000002 PTEC 00000002)
ACPI: FACP 0x000000007B253000 00010C (v05 INTEL EDK2 00000002 PTEC 00000002)
ACPI: DSDT 0x000000007B230000 01DBD6 (v02 INTEL EDK2 00000003 CHV 0100000D)
ACPI: FACS 0x000000007B1BD000 000040
ACPI: FACS 0x000000007B1BD000 000040
ACPI: TCPA 0x000000007B257000 000032 (v02 INTEL EDK2 00000002 PTEC 00000002)
ACPI: SSDT 0x000000007B256000 0000B1 (v01 Intel_ ADebTabl 00001000 INTL 20120711)
ACPI: UEFI 0x000000007B255000 000042 (v01 INTEL EDK2 00000002 PTEC 00000002)
ACPI: HPET 0x000000007B252000 000038 (v01 INTEL EDK2 00000002 PTEC 00000002)
ACPI: LPIT 0x000000007B251000 000104 (v01 INTEL EDK2 00000002 PTEC 00000002)
ACPI: APIC 0x000000007B250000 00006C (v03 INTEL EDK2 00000002 PTEC 00000002)
ACPI: MCFG 0x000000007B24F000 00003C (v01 INTEL EDK2 00000002 PTEC 00000002)
ACPI: PRAM 0x000000007B24E000 000030 (v01 INTEL EDK2 00000002 PTEC 00000002)
ACPI: SSDT 0x000000007B22F000 000654 (v01 INTEL CpuDptf 00000003 CHV 0100000D)
ACPI: SSDT 0x000000007B22A000 004785 (v01 INTEL DptfTab 00000003 CHV 0100000D)
ACPI: SSDT 0x000000007B229000 000058 (v01 INTEL LowPwrM 00000003 CHV 0100000D)
ACPI: SSDT 0x000000007B228000 000763 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: SSDT 0x000000007B227000 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20120711)
ACPI: SSDT 0x000000007B226000 00017A (v01 PmRef ApTst 00003000 INTL 20120711)
ACPI: UEFI 0x000000007B225000 000042 (v01 PTL COMBUF 00000002 PTEC 00000002)
ACPI: POAT 0x000000007B1C0000 000055 (v03 00000002 PTEC 00000002)
ACPI: BATB 0x000000007B224000 000046 (v01 \xffffffc6? \xffffffff\xffffffffL??g? 00000002 PTEC 00000002)
ACPI: FPDT 0x000000007B223000 000054 (v01 00000002 PTEC 00000002)
ACPI: SSDT 0x000000007B222000 000432 (v01 Intel_ Tpm2Tabl 00001000 INTL 20120711)
ACPI: TPM2 0x000000007B221000 000034 (v03 00000002 PTEC 00000002)
ACPI: CSRT 0x000000007B254000 00014C (v00 INTEL EDK2 00000002 PTEC 00000002)
ACPI: UEFI 0x000000007B220000 00009E (v01 00000002 PTEC 00000002)
ACPI: BGRT 0x000000007B21F000 000038 (v01 00000002 PTEC 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
NODE_DATA(0) allocated [mem 0x7b270000-0x7b274fff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880073800000-ffff8800757fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0x7bffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008efff]
node 0: [mem 0x00090000-0x0009ffff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x7a97ffff]
node 0: [mem 0x7b259000-0x7b277fff]
node 0: [mem 0x7b279000-0x7b27bfff]
node 0: [mem 0x7b27d000-0x7bffffff]
Initmem setup node 0 [mem 0x00001000-0x7bffffff]
On node 0 totalpages: 505027
DMA zone: 64 pages used for memmap
DMA zone: 23 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 7872 pages used for memmap
DMA32 zone: 501029 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x7cc00000-0x7ebfffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x7a980000-0x7ae37fff]
PM: Registered nosave memory: [mem 0x7ae38000-0x7aec8fff]
PM: Registered nosave memory: [mem 0x7aec9000-0x7b118fff]
PM: Registered nosave memory: [mem 0x7b119000-0x7b218fff]
PM: Registered nosave memory: [mem 0x7b219000-0x7b258fff]
PM: Registered nosave memory: [mem 0x7b278000-0x7b278fff]
PM: Registered nosave memory: [mem 0x7b27c000-0x7b27cfff]
e820: [mem 0x7ec00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88007a200000 s86144 r8192 d32640 u524288
pcpu-alloc: s86144 r8192 d32640 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 497068
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1865680K/2020108K available (8074K kernel code, 1186K rwdata, 3804K rodata, 1416K init, 1272K bss, 154428K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/rtc.c:92 mach_get_cmos_time+0x1af/0x1c0()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.19.8-ckt7-ecs+ #1
Hardware name: Intel Corp. EF20/EF20, BIOS CTT3EF20EAx.90A.0005.2016.0908.1433 09/08/2016
ffffffff81a8da73 ffffffff81c03df8 ffffffff817d5ba3 0000000000000ba2
0000000000000000 ffffffff81c03e38 ffffffff81073a3a ffffffff81edc122
ffffffff81c03ee8 0000000000000020 000000000000000d 0000000000000000
Call Trace:
[] dump_stack+0x45/0x57
[] warn_slowpath_common+0x8a/0xc0
[] warn_slowpath_null+0x1a/0x20
[] mach_get_cmos_time+0x1af/0x1c0
[] read_persistent_clock+0xf/0x20
[] timekeeping_init+0x1a/0x18e
[] ? _cond_resched+0x5/0x40
[] ? mutex_lock+0x16/0x37
[] ? mutex_unlock+0x5/0x20
[] start_kernel+0x2d5/0x4a6
[] ? set_init_arg+0x55/0x55
[] ? early_idt_handler_array+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace 44a0a97092445711 ]---
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1439.696 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2879.39 BogoMIPS (lpj=5758784)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e8c000 - ffffffff81e94000)
Ignoring BGRT: invalid status 0 (expected 1)
ftrace: allocating 30269 entries in 119 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Atom(TM) x5-Z8300 CPU @ 1.44GHz (fam: 06, model: 4c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11517.56 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7b119000-0x7b218fff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 0:00:14, date: 05/01/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
Executing Method \_SB_.PCI0.I2C1._REG
Executing Method \_SB_.PCI0.I2C2._REG
Executing Method \_SB_.PCI0.I2C3._REG
Executing Method \_SB_.PCI0.I2C7._REG
Executing Method \_SB_.GPO0._REG
Executing Method \_SB_.GPO0._REG
Initializing Region \_SB_.PCI0.CHVC.HBUS
Initializing Region \_SB_.PCI0.LPCB.LPC0
Initializing Region \_SB_.PCI0.XHC1.XHCR
Initializing Region \_SB_.PCI0.XHC1.XPRT
Initializing Region \_SB_.PCI0.XHC1.RHUB.HS03.BAD0
Initializing Region \_SB_.PCI0.XHC1.RHUB.HS03.BAD1
Initializing Region \_SB_.PCI0.XHC1.RHUB.HS13.BADR
Initializing Region \_SB_.PCI0.XHC1.RHUB.HS13.BAD1
Initializing Region \_SB_.PCI0.XHC1.RHUB.SSC1.BAD0
Initializing Region \_SB_.PCI0.XHC1.RHUB.SSCW.BAD0
Initializing Region \_SB_.PCI0.XHC1.RHUB.HSC1.BADR
Initializing Region \_SB_.PCI0.XHC1.RHUB.HSC1.BAD1
Initializing Region \_SB_.PCI0.XHC1.RHUB.HSC3.BAD0
Initializing Region \_SB_.PCI0.XHC1.RHUB.HSC3.BAD1
Initializing Region \_SB_.PCI0.OTG1.PMEB
Initializing Region \_SB_.PCI0.OTG1.GENR
Initializing Region \_SB_.PCI0.SDHA.KEYS
Initializing Region \GNVS
Initializing Region \_SB_.PCI0.PEMC.SDIO
Initializing Region \_SB_.PCI0.SDHB.KEYS
Initializing Region \_SB_.PCI0.SDHC.KEYS
Initializing Region \_SB_.PCI0.SHC1.KEYS
Initializing BufferField \_SB_.PCI0.SHC1.STAT
Initializing BufferField \_SB_.PCI0.SHC1.DATA
Initializing Region \_SB_.PCI0.PWM1.KEYS
Initializing Region \_SB_.PCI0.PWM2.KEYS
Initializing Region \_SB_.PCI0.URT1.KEYS
Initializing Region \_SB_.PCI0.URT2.KEYS
Initializing Region \_SB_.PCI0.SPI1.KEYS
Initializing Region \_SB_.PCI0.SPI2.KEYS
Initializing Region \_SB_.PCI0.SPI3.KEYS
Initializing Region \_SB_.PCI0.I2C1.KEYS
Initializing Region \_SB_.PCI0.I2C1.DVFG
Initializing Region \_SB_.PCI0.I2C1.DVBC
Initializing BufferField \_SB_.PCI0.I2C1.BATC.BYAT
Initializing BufferField \_SB_.PCI0.I2C1.BATC.DATA
Initializing BufferField \_SB_.PCI0.I2C1.BATC.BSTA
Initializing BufferField \_SB_.PCI0.I2C1.BATC.BLEN
Initializing BufferField \_SB_.PCI0.I2C1.BATC.DAT1
Initializing BufferField \_SB_.PCI0.I2C1.BATC.BSTS
Initializing BufferField \_SB_.PCI0.I2C1.BATC.SLEN
Initializing BufferField \_SB_.PCI0.I2C1.BATC.WRD1
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INST
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INLN
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INT0
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INT1
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INT2
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INT3
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INT4
Initializing BufferField \_SB_.PCI0.I2C1.BATC.INT5
Initializing Region \_SB_.PCI0.I2C2.KEYS
Initializing Region \_SB_.PCI0.I2C2.RALM
Initializing BufferField \_SB_.PCI0.I2C2.STA6
Initializing BufferField \_SB_.PCI0.I2C2.DAT6
Initializing Region \_SB_.PCI0.I2C3.KEYS
Initializing Region \_SB_.PCI0.I2C3.TIP1
Initializing Region \_SB_.PCI0.I2C3.TIDR.BMOP
Initializing BufferField \_SB_.PCI0.I2C3.TIDR.STAT
Initializing BufferField \_SB_.PCI0.I2C3.TIDR.DATA
Initializing Region \_SB_.PCI0.I2C3.POCR
Initializing Region \_SB_.PCI0.I2C3.DVUM
Initializing BufferField \_SB_.PCI0.I2C3.BATC.STA7
Initializing BufferField \_SB_.PCI0.I2C3.BATC.LEN7
Initializing BufferField \_SB_.PCI0.I2C3.BATC.BYTC
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TPSS
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBSC
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBRM
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBPV
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBPR
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TFCC
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBTM
Initializing BufferField \_SB_.PCI0.I2C3.BATC.STA8
Initializing BufferField \_SB_.PCI0.I2C3.BATC.LEN8
Initializing BufferField \_SB_.PCI0.I2C3.BATC.CNT8
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBDS
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBDV
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBFC
Initializing BufferField \_SB_.PCI0.I2C3.BATC.BYAT
Initializing BufferField \_SB_.PCI0.I2C3.BATC.DATA
Initializing BufferField \_SB_.PCI0.I2C3.BATC.STA2
Initializing BufferField \_SB_.PCI0.I2C3.BATC.LEN2
Initializing BufferField \_SB_.PCI0.I2C3.BATC.DAT2
Initializing BufferField \_SB_.PCI0.I2C3.BATC.STA3
Initializing BufferField \_SB_.PCI0.I2C3.BATC.THM1
Initializing BufferField \_SB_.PCI0.I2C3.BATC.STA4
Initializing BufferField \_SB_.PCI0.I2C3.BATC.THMP
Initializing BufferField \_SB_.PCI0.I2C3.BATC.ST10
Initializing BufferField \_SB_.PCI0.I2C3.BATC.TBNS
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.STA9
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.LEN9
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBYC
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DPSS
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBSC
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBRM
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBPV
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBPR
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DFCC
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBTM
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.STAA
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.LENA
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.CNTA
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBDS
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBDV
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBFC
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.BYAT
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DATA
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.STA2
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.LEN2
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DAT2
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.ST11
Initializing BufferField \_SB_.PCI0.I2C3.BAT2.DBNS
Initializing BufferField \_SB_.PCI0.I2C3.DJST
Initializing BufferField \_SB_.PCI0.I2C3.DJDD
Initializing BufferField \_SB_.PCI0.I2C3.D2DD
Initializing Region \_SB_.PCI0.I2C4.KEYS
Initializing Region \_SB_.PCI0.I2C5.KEYS
Initializing Region \_SB_.PCI0.I2C6.KEYS
Initializing Region \_SB_.PCI0.I2C7.KEYS
Initializing Region \_SB_.PCI0.I2C7.GPEX
Initializing Region \_SB_.PCI0.I2C7.GPUS
Initializing Region \_SB_.PCI0.I2C7.DZFG
Initializing Region \_SB_.PCI0.I2C7.XOPR
Initializing Region \_SB_.PCI0.I2C7.PMI1.PMOP
Initializing Region \_SB_.PCI0.I2C7.PMI1.DPTF
Initializing Region \_SB_.PCI0.I2C7.PMI1.GPOP
Initializing Region \_SB_.PCI0.I2C7.PMI2.PMOP
Initializing Region \_SB_.PCI0.I2C7.PMI2.DPTF
Initializing Region \_SB_.PCI0.I2C7.PMI2.GPOP
Initializing Region \_SB_.PCI0.I2C7.PMI5.DPTF
Initializing Region \_SB_.PCI0.I2C7.PMI5.PMOP
Initializing Region \_SB_.PCI0.I2C7.PMI5.GPOP
Initializing Region \_SB_.PCI0.I2C7.PMI5.REGS
Initializing Region \_SB_.PCI0.I2C7.PMIC.DPTF
Initializing Region \_SB_.PCI0.I2C7.PMIC.PMOP
Initializing Region \_SB_.PCI0.I2C7.PMIC.GPOP
Initializing Region \_SB_.PCI0.I2C7.BMDR.BMOP
Initializing BufferField \_SB_.PCI0.I2C7.BMDR.STAT
Initializing BufferField \_SB_.PCI0.I2C7.BMDR.DATA
Initializing Region \_SB_.PCI0.I2C7.WIDR.BMOP
Initializing BufferField \_SB_.PCI0.I2C7.BATC.BYAT
Initializing BufferField \_SB_.PCI0.I2C7.BATC.DATA
Initializing BufferField \_SB_.PCI0.I2C7.BATC.BSTA
Initializing BufferField \_SB_.PCI0.I2C7.BATC.BLEN
Initializing BufferField \_SB_.PCI0.I2C7.BATC.DAT1
Initializing BufferField \_SB_.PCI0.I2C7.BATC.BSTS
Initializing BufferField \_SB_.PCI0.I2C7.BATC.SLEN
Initializing BufferField \_SB_.PCI0.I2C7.BATC.WRD1
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INST
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INLN
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INT0
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INT1
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INT2
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INT3
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INT4
Initializing BufferField \_SB_.PCI0.I2C7.BATC.INT5
Initializing Region \_SB_.PCI0.RP01.PXCS
Initializing Region \_SB_.PCI0.RP02.PXCS
Initializing Region \_SB_.PCI0.RP03.PXCS
Initializing Region \_SB_.PCI0.RP04.PXCS
Initializing Region \_SB_.PCI0.IISH.KEYS
Initializing Region \_SB_.PCI0.LPEA.KEYS
Initializing Region \_SB_.PCI0.SEC0.PMEB
Initializing Region \_SB_.PCI0.GFX0.LPS2
Initializing Region \_SB_.PCI0.GFX0.POP1
Initializing Region \_SB_.PCI0.GFX0.PMCS
Initializing Region \_SB_.PCI0.GFX0.GN24
Initializing Region \_SB_.PCI0.GFX0.IGDP
Initializing Region \_SB_.PCI0.GFX0.IGMM
Initializing Region \_SB_.PCI0.GFX0.IGDM
Initializing Region \_SB_.PCI0.XHBA
Initializing Region \_SB_.PCI0.XOP1
Initializing Region \_SB_.PCI0.PNIT.SOCP
Initializing Region \_SB_.ILBR
Initializing Region \_SB_.GPED.SCIS
Initializing Region \_SB_.GPO0.XCFG
Initializing Region \_SB_.GPO0.BADR
Initializing Region \_SB_.GPO0.GPOP
Initializing Region \_SB_.GPO0.GMMR
Initializing Region \_SB_.GPO1.GPOP
Initializing Region \_SB_.GPO1.GMMR
Initializing BufferField \_SB_.GPO1.STAT
Initializing BufferField \_SB_.GPO1.DATA
Initializing BufferField \_SB_.GPO2.STAT
Initializing BufferField \_SB_.GPO2.LEN_
Initializing BufferField \_SB_.GPO2.TMP0
Initializing BufferField \_SB_.GPO2.AX00
Initializing BufferField \_SB_.GPO2.AX01
Initializing BufferField \_SB_.GPO2.AX10
Initializing BufferField \_SB_.GPO2.AX11
Initializing Region \_SB_.GPO3.GPOP
Initializing Region \_SB_.GPO3.GMMR
Initializing Region \_SB_.FLDM.BADR
Initializing Region \_SB_.FLDM.BAD1
Initializing Region \_SB_.FLDM.CFG1
Initializing Region \_SB_.FLDM.ADR3
Initializing Region \_SB_.MBID.REGS
Initializing Region \_SB_.NV1_
Initializing BufferField \_SB_.PR20.WRDD
Initializing BufferField \_SB_.PR20.WRDL
Initializing BufferField \_SB_.PR20.WRDH
Initializing BufferField \_SB_.PR16.WRDD
Initializing BufferField \_SB_.PR16.WRDL
Initializing BufferField \_SB_.PR16.WRDH
Initializing BufferField \_SB_.STR3.STAT
Initializing BufferField \_SB_.STR3.LEN_
Initializing BufferField \_SB_.STR3.TMP0
Initializing BufferField \_SB_.STR3.AX00
Initializing BufferField \_SB_.STR3.AX01
Initializing BufferField \_SB_.STR3.AX10
Initializing BufferField \_SB_.STR3.AX11
Initializing Region \_SB_.TPM_.TICR
Initializing Region \_SB_.TPM_.SMIP
Initializing Region \_SB_.TPM_.TNVS
Initializing Region \PMIO
Initializing Region \PMCR
Initializing Region \PPSC
Initializing Region \GPN7
Initializing Region \PRT0
Initializing Region \SPRT
Initializing Region \SWC0
Initializing Region \SWC1
Initializing Region \GN04
Initializing Region \SE79
Initializing BufferField \AMW0.STA4
Initializing BufferField \AMW0.THMP
Executing Method \_SB_._STA
Executing Method \_SB_._INI
Executing Method \_SB_.PCI0._STA
Executing Method \_SB_.PCI0._INI
Executing Method \_SB_.PCI0.PNIT._STA
Executing Method \_SB_.PCI0.PNIT._INI
Executing Method \_SB_.PR20._STA
Executing Method \_SB_.PR16._STA
Executing Method \_SB_.STR2._STA
Executing Method \_SB_.STR3._STA
Executing Method \_SB_.SAMB._STA
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880073383000 00057B (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800733DB800 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88007B838400 00015F (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800733C9D80 00008D (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20141107/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [WWPR] (off)
ACPI: Power Resource [CLK3] (on)
ACPI: Power Resource [CLK4] (on)
ACPI: Power Resource [CLK2] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [CLK0] (on)
ACPI: Power Resource [CLK1] (on)
ACPI: Power Resource [P28X] (off)
ACPI: Power Resource [P18X] (off)
ACPI: Power Resource [P19X] (off)
ACPI: Power Resource [ID3C] (on)
ACPI: Power Resource [P06X] (off)
ACPI: Power Resource [P12X] (off)
ACPI: Power Resource [P28P] (off)
ACPI: Power Resource [P18P] (off)
ACPI: Power Resource [P28T] (off)
ACPI: Power Resource [P18D] (off)
ACPI: Power Resource [P18T] (off)
ACPI: Power Resource [P3P3] (off)
ACPI: Power Resource [P12T] (off)
ACPI: Power Resource [P28W] (off)
ACPI: Power Resource [P18W] (off)
ACPI: Power Resource [P12W] (off)
ACPI: Power Resource [P33W] (off)
ACPI: Power Resource [P33X] (off)
(null): Returned _DSD data is not valid, skipping
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff]
pci_bus 0000:00: root bus resource [mem 0x7cc00001-0x7ec00000]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
pci 0000:00:0b.0: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
cherryview-pinctrl INT33FF:00: try to register 56 pins ...
pinctrl core: registered pin 0 (FST_SPI_D2) on INT33FF:00
pinctrl core: registered pin 1 (FST_SPI_D0) on INT33FF:00
pinctrl core: registered pin 2 (FST_SPI_CLK) on INT33FF:00
pinctrl core: registered pin 3 (FST_SPI_D3) on INT33FF:00
pinctrl core: registered pin 4 (FST_SPI_CS1_B) on INT33FF:00
pinctrl core: registered pin 5 (FST_SPI_D1) on INT33FF:00
pinctrl core: registered pin 6 (FST_SPI_CS0_B) on INT33FF:00
pinctrl core: registered pin 7 (FST_SPI_CS2_B) on INT33FF:00
pinctrl core: registered pin 15 (UART1_RTS_B) on INT33FF:00
pinctrl core: registered pin 16 (UART1_RXD) on INT33FF:00
pinctrl core: registered pin 17 (UART2_RXD) on INT33FF:00
pinctrl core: registered pin 18 (UART1_CTS_B) on INT33FF:00
pinctrl core: registered pin 19 (UART2_RTS_B) on INT33FF:00
pinctrl core: registered pin 20 (UART1_TXD) on INT33FF:00
pinctrl core: registered pin 21 (UART2_TXD) on INT33FF:00
pinctrl core: registered pin 22 (UART2_CTS_B) on INT33FF:00
pinctrl core: registered pin 30 (MF_HDA_CLK) on INT33FF:00
pinctrl core: registered pin 31 (MF_HDA_RSTB) on INT33FF:00
pinctrl core: registered pin 32 (MF_HDA_SDIO) on INT33FF:00
pinctrl core: registered pin 33 (MF_HDA_SDO) on INT33FF:00
pinctrl core: registered pin 34 (MF_HDA_DOCKRSTB) on INT33FF:00
pinctrl core: registered pin 35 (MF_HDA_SYNC) on INT33FF:00
pinctrl core: registered pin 36 (MF_HDA_SDI1) on INT33FF:00
pinctrl core: registered pin 37 (MF_HDA_DOCKENB) on INT33FF:00
pinctrl core: registered pin 45 (I2C5_SDA) on INT33FF:00
pinctrl core: registered pin 46 (I2C4_SDA) on INT33FF:00
pinctrl core: registered pin 47 (I2C6_SDA) on INT33FF:00
pinctrl core: registered pin 48 (I2C5_SCL) on INT33FF:00
pinctrl core: registered pin 49 (I2C_NFC_SDA) on INT33FF:00
pinctrl core: registered pin 50 (I2C4_SCL) on INT33FF:00
pinctrl core: registered pin 51 (I2C6_SCL) on INT33FF:00
pinctrl core: registered pin 52 (I2C_NFC_SCL) on INT33FF:00
pinctrl core: registered pin 60 (I2C1_SDA) on INT33FF:00
pinctrl core: registered pin 61 (I2C0_SDA) on INT33FF:00
pinctrl core: registered pin 62 (I2C2_SDA) on INT33FF:00
pinctrl core: registered pin 63 (I2C1_SCL) on INT33FF:00
pinctrl core: registered pin 64 (I2C3_SDA) on INT33FF:00
pinctrl core: registered pin 65 (I2C0_SCL) on INT33FF:00
pinctrl core: registered pin 66 (I2C2_SCL) on INT33FF:00
pinctrl core: registered pin 67 (I2C3_SCL) on INT33FF:00
pinctrl core: registered pin 75 (SATA_GP0) on INT33FF:00
pinctrl core: registered pin 76 (SATA_GP1) on INT33FF:00
pinctrl core: registered pin 77 (SATA_LEDN) on INT33FF:00
pinctrl core: registered pin 78 (SATA_GP2) on INT33FF:00
pinctrl core: registered pin 79 (MF_SMB_ALERTB) on INT33FF:00
pinctrl core: registered pin 80 (SATA_GP3) on INT33FF:00
pinctrl core: registered pin 81 (MF_SMB_CLK) on INT33FF:00
pinctrl core: registered pin 82 (MF_SMB_DATA) on INT33FF:00
pinctrl core: registered pin 90 (PCIE_CLKREQ0B) on INT33FF:00
pinctrl core: registered pin 91 (PCIE_CLKREQ1B) on INT33FF:00
pinctrl core: registered pin 92 (GP_SSP_2_CLK) on INT33FF:00
pinctrl core: registered pin 93 (PCIE_CLKREQ2B) on INT33FF:00
pinctrl core: registered pin 94 (GP_SSP_2_RXD) on INT33FF:00
pinctrl core: registered pin 95 (PCIE_CLKREQ3B) on INT33FF:00
pinctrl core: registered pin 96 (GP_SSP_2_FS) on INT33FF:00
pinctrl core: registered pin 97 (GP_SSP_2_TXD) on INT33FF:00
cherryview-pinctrl INT33FF:00: failed to lookup the default state
cherryview-pinctrl INT33FF:00: failed to lookup the sleep state
gpiochip_find_base: found new base at 456
Executing Method \_SB_.GPO0._REG
gpiochip_add: registered GPIOs 456 to 511 on device: INT33FF:00
GPIO chip INT33FF:00: created GPIO range 0->7 ==> INT33FF:00 PIN 0->7
GPIO chip INT33FF:00: created GPIO range 8->15 ==> INT33FF:00 PIN 15->22
GPIO chip INT33FF:00: created GPIO range 16->23 ==> INT33FF:00 PIN 30->37
GPIO chip INT33FF:00: created GPIO range 24->31 ==> INT33FF:00 PIN 45->52
GPIO chip INT33FF:00: created GPIO range 32->39 ==> INT33FF:00 PIN 60->67
GPIO chip INT33FF:00: created GPIO range 40->47 ==> INT33FF:00 PIN 75->82
GPIO chip INT33FF:00: created GPIO range 48->55 ==> INT33FF:00 PIN 90->97
cherryview-pinctrl INT33FF:01: try to register 59 pins ...
pinctrl core: registered pin 0 (GPIO_DFX_0) on INT33FF:01
pinctrl core: registered pin 1 (GPIO_DFX_3) on INT33FF:01
pinctrl core: registered pin 2 (GPIO_DFX_7) on INT33FF:01
pinctrl core: registered pin 3 (GPIO_DFX_1) on INT33FF:01
pinctrl core: registered pin 4 (GPIO_DFX_5) on INT33FF:01
pinctrl core: registered pin 5 (GPIO_DFX_4) on INT33FF:01
pinctrl core: registered pin 6 (GPIO_DFX_8) on INT33FF:01
pinctrl core: registered pin 7 (GPIO_DFX_2) on INT33FF:01
pinctrl core: registered pin 8 (GPIO_DFX_6) on INT33FF:01
pinctrl core: registered pin 15 (GPIO_SUS0) on INT33FF:01
pinctrl core: registered pin 16 (SEC_GPIO_SUS10) on INT33FF:01
pinctrl core: registered pin 17 (GPIO_SUS3) on INT33FF:01
pinctrl core: registered pin 18 (GPIO_SUS7) on INT33FF:01
pinctrl core: registered pin 19 (GPIO_SUS1) on INT33FF:01
pinctrl core: registered pin 20 (GPIO_SUS5) on INT33FF:01
pinctrl core: registered pin 21 (SEC_GPIO_SUS11) on INT33FF:01
pinctrl core: registered pin 22 (GPIO_SUS4) on INT33FF:01
pinctrl core: registered pin 23 (SEC_GPIO_SUS8) on INT33FF:01
pinctrl core: registered pin 24 (GPIO_SUS2) on INT33FF:01
pinctrl core: registered pin 25 (GPIO_SUS6) on INT33FF:01
pinctrl core: registered pin 26 (CX_PREQ_B) on INT33FF:01
pinctrl core: registered pin 27 (SEC_GPIO_SUS9) on INT33FF:01
pinctrl core: registered pin 30 (TRST_B) on INT33FF:01
pinctrl core: registered pin 31 (TCK) on INT33FF:01
pinctrl core: registered pin 32 (PROCHOT_B) on INT33FF:01
pinctrl core: registered pin 33 (SVIDO_DATA) on INT33FF:01
pinctrl core: registered pin 34 (TMS) on INT33FF:01
pinctrl core: registered pin 35 (CX_PRDY_B_2) on INT33FF:01
pinctrl core: registered pin 36 (TDO_2) on INT33FF:01
pinctrl core: registered pin 37 (CX_PRDY_B) on INT33FF:01
pinctrl core: registered pin 38 (SVIDO_ALERT_B) on INT33FF:01
pinctrl core: registered pin 39 (TDO) on INT33FF:01
pinctrl core: registered pin 40 (SVIDO_CLK) on INT33FF:01
pinctrl core: registered pin 41 (TDI) on INT33FF:01
pinctrl core: registered pin 45 (GP_CAMERASB_05) on INT33FF:01
pinctrl core: registered pin 46 (GP_CAMERASB_02) on INT33FF:01
pinctrl core: registered pin 47 (GP_CAMERASB_08) on INT33FF:01
pinctrl core: registered pin 48 (GP_CAMERASB_00) on INT33FF:01
pinctrl core: registered pin 49 (GP_CAMERASB_06) on INT33FF:01
pinctrl core: registered pin 50 (GP_CAMERASB_10) on INT33FF:01
pinctrl core: registered pin 51 (GP_CAMERASB_03) on INT33FF:01
pinctrl core: registered pin 52 (GP_CAMERASB_09) on INT33FF:01
pinctrl core: registered pin 53 (GP_CAMERASB_01) on INT33FF:01
pinctrl core: registered pin 54 (GP_CAMERASB_07) on INT33FF:01
pinctrl core: registered pin 55 (GP_CAMERASB_11) on INT33FF:01
pinctrl core: registered pin 56 (GP_CAMERASB_04) on INT33FF:01
pinctrl core: registered pin 60 (PANEL0_BKLTEN) on INT33FF:01
pinctrl core: registered pin 61 (HV_DDI0_HPD) on INT33FF:01
pinctrl core: registered pin 62 (HV_DDI2_DDC_SDA) on INT33FF:01
pinctrl core: registered pin 63 (PANEL1_BKLTCTL) on INT33FF:01
pinctrl core: registered pin 64 (HV_DDI1_HPD) on INT33FF:01
pinctrl core: registered pin 65 (PANEL0_BKLTCTL) on INT33FF:01
pinctrl core: registered pin 66 (HV_DDI0_DDC_SDA) on INT33FF:01
pinctrl core: registered pin 67 (HV_DDI2_DDC_SCL) on INT33FF:01
pinctrl core: registered pin 68 (HV_DDI2_HPD) on INT33FF:01
pinctrl core: registered pin 69 (PANEL1_VDDEN) on INT33FF:01
pinctrl core: registered pin 70 (PANEL1_BKLTEN) on INT33FF:01
pinctrl core: registered pin 71 (HV_DDI0_DDC_SCL) on INT33FF:01
pinctrl core: registered pin 72 (PANEL0_VDDEN) on INT33FF:01
cherryview-pinctrl INT33FF:01: failed to lookup the default state
cherryview-pinctrl INT33FF:01: failed to lookup the sleep state
gpiochip_find_base: found new base at 397
Executing Method \_SB_.GPO1._REG
gpiochip_add: registered GPIOs 397 to 455 on device: INT33FF:01
GPIO chip INT33FF:01: created GPIO range 0->8 ==> INT33FF:01 PIN 0->8
GPIO chip INT33FF:01: created GPIO range 9->21 ==> INT33FF:01 PIN 15->27
GPIO chip INT33FF:01: created GPIO range 22->33 ==> INT33FF:01 PIN 30->41
GPIO chip INT33FF:01: created GPIO range 34->45 ==> INT33FF:01 PIN 45->56
GPIO chip INT33FF:01: created GPIO range 46->58 ==> INT33FF:01 PIN 60->72
cherryview-pinctrl INT33FF:01: request pin 5 (GPIO_DFX_4) for INT33FF:01:402
cherryview-pinctrl INT33FF:01: request pin 7 (GPIO_DFX_2) for INT33FF:01:404
cherryview-pinctrl INT33FF:02: try to register 24 pins ...
pinctrl core: registered pin 0 (PMU_SLP_S3_B) on INT33FF:02
pinctrl core: registered pin 1 (PMU_BATLOW_B) on INT33FF:02
pinctrl core: registered pin 2 (SUS_STAT_B) on INT33FF:02
pinctrl core: registered pin 3 (PMU_SLP_S0IX_B) on INT33FF:02
pinctrl core: registered pin 4 (PMU_AC_PRESENT) on INT33FF:02
pinctrl core: registered pin 5 (PMU_PLTRST_B) on INT33FF:02
pinctrl core: registered pin 6 (PMU_SUSCLK) on INT33FF:02
pinctrl core: registered pin 7 (PMU_SLP_LAN_B) on INT33FF:02
pinctrl core: registered pin 8 (PMU_PWRBTN_B) on INT33FF:02
pinctrl core: registered pin 9 (PMU_SLP_S4_B) on INT33FF:02
pinctrl core: registered pin 10 (PMU_WAKE_B) on INT33FF:02
pinctrl core: registered pin 11 (PMU_WAKE_LAN_B) on INT33FF:02
pinctrl core: registered pin 15 (MF_ISH_GPIO_3) on INT33FF:02
pinctrl core: registered pin 16 (MF_ISH_GPIO_7) on INT33FF:02
pinctrl core: registered pin 17 (MF_ISH_I2C1_SCL) on INT33FF:02
pinctrl core: registered pin 18 (MF_ISH_GPIO_1) on INT33FF:02
pinctrl core: registered pin 19 (MF_ISH_GPIO_5) on INT33FF:02
pinctrl core: registered pin 20 (MF_ISH_GPIO_9) on INT33FF:02
pinctrl core: registered pin 21 (MF_ISH_GPIO_0) on INT33FF:02
pinctrl core: registered pin 22 (MF_ISH_GPIO_4) on INT33FF:02
pinctrl core: registered pin 23 (MF_ISH_GPIO_8) on INT33FF:02
pinctrl core: registered pin 24 (MF_ISH_GPIO_2) on INT33FF:02
pinctrl core: registered pin 25 (MF_ISH_GPIO_6) on INT33FF:02
pinctrl core: registered pin 26 (MF_ISH_I2C1_SDA) on INT33FF:02
cherryview-pinctrl INT33FF:02: failed to lookup the default state
cherryview-pinctrl INT33FF:02: failed to lookup the sleep state
gpiochip_find_base: found new base at 373
gpiochip_add: registered GPIOs 373 to 396 on device: INT33FF:02
GPIO chip INT33FF:02: created GPIO range 0->11 ==> INT33FF:02 PIN 0->11
GPIO chip INT33FF:02: created GPIO range 12->23 ==> INT33FF:02 PIN 15->26
cherryview-pinctrl INT33FF:03: try to register 55 pins ...
pinctrl core: registered pin 0 (MF_PLT_CLK0) on INT33FF:03
pinctrl core: registered pin 1 (PWM1) on INT33FF:03
pinctrl core: registered pin 2 (MF_PLT_CLK1) on INT33FF:03
pinctrl core: registered pin 3 (MF_PLT_CLK4) on INT33FF:03
pinctrl core: registered pin 4 (MF_PLT_CLK3) on INT33FF:03
pinctrl core: registered pin 5 (PWM0) on INT33FF:03
pinctrl core: registered pin 6 (MF_PLT_CLK5) on INT33FF:03
pinctrl core: registered pin 7 (MF_PLT_CLK2) on INT33FF:03
pinctrl core: registered pin 15 (SDMMC2_D3_CD_B) on INT33FF:03
pinctrl core: registered pin 16 (SDMMC1_CLK) on INT33FF:03
pinctrl core: registered pin 17 (SDMMC1_D0) on INT33FF:03
pinctrl core: registered pin 18 (SDMMC2_D1) on INT33FF:03
pinctrl core: registered pin 19 (SDMMC2_CLK) on INT33FF:03
pinctrl core: registered pin 20 (SDMMC1_D2) on INT33FF:03
pinctrl core: registered pin 21 (SDMMC2_D2) on INT33FF:03
pinctrl core: registered pin 22 (SDMMC2_CMD) on INT33FF:03
pinctrl core: registered pin 23 (SDMMC1_CMD) on INT33FF:03
pinctrl core: registered pin 24 (SDMMC1_D1) on INT33FF:03
pinctrl core: registered pin 25 (SDMMC2_D0) on INT33FF:03
pinctrl core: registered pin 26 (SDMMC1_D3_CD_B) on INT33FF:03
pinctrl core: registered pin 30 (SDMMC3_D1) on INT33FF:03
pinctrl core: registered pin 31 (SDMMC3_CLK) on INT33FF:03
pinctrl core: registered pin 32 (SDMMC3_D3) on INT33FF:03
pinctrl core: registered pin 33 (SDMMC3_D2) on INT33FF:03
pinctrl core: registered pin 34 (SDMMC3_CMD) on INT33FF:03
pinctrl core: registered pin 35 (SDMMC3_D0) on INT33FF:03
pinctrl core: registered pin 45 (MF_LPC_AD2) on INT33FF:03
pinctrl core: registered pin 46 (LPC_CLKRUNB) on INT33FF:03
pinctrl core: registered pin 47 (MF_LPC_AD0) on INT33FF:03
pinctrl core: registered pin 48 (LPC_FRAMEB) on INT33FF:03
pinctrl core: registered pin 49 (MF_LPC_CLKOUT1) on INT33FF:03
pinctrl core: registered pin 50 (MF_LPC_AD3) on INT33FF:03
pinctrl core: registered pin 51 (MF_LPC_CLKOUT0) on INT33FF:03
pinctrl core: registered pin 52 (MF_LPC_AD1) on INT33FF:03
pinctrl core: registered pin 60 (SPI1_MISO) on INT33FF:03
pinctrl core: registered pin 61 (SPI1_CSO_B) on INT33FF:03
pinctrl core: registered pin 62 (SPI1_CLK) on INT33FF:03
pinctrl core: registered pin 63 (MMC1_D6) on INT33FF:03
pinctrl core: registered pin 64 (SPI1_MOSI) on INT33FF:03
pinctrl core: registered pin 65 (MMC1_D5) on INT33FF:03
pinctrl core: registered pin 66 (SPI1_CS1_B) on INT33FF:03
pinctrl core: registered pin 67 (MMC1_D4_SD_WE) on INT33FF:03
pinctrl core: registered pin 68 (MMC1_D7) on INT33FF:03
pinctrl core: registered pin 69 (MMC1_RCLK) on INT33FF:03
pinctrl core: registered pin 75 (USB_OC1_B) on INT33FF:03
pinctrl core: registered pin 76 (PMU_RESETBUTTON_B) on INT33FF:03
pinctrl core: registered pin 77 (GPIO_ALERT) on INT33FF:03
pinctrl core: registered pin 78 (SDMMC3_PWR_EN_B) on INT33FF:03
pinctrl core: registered pin 79 (ILB_SERIRQ) on INT33FF:03
pinctrl core: registered pin 80 (USB_OC0_B) on INT33FF:03
pinctrl core: registered pin 81 (SDMMC3_CD_B) on INT33FF:03
pinctrl core: registered pin 82 (SPKR) on INT33FF:03
pinctrl core: registered pin 83 (SUSPWRDNACK) on INT33FF:03
pinctrl core: registered pin 84 (SPARE_PIN) on INT33FF:03
pinctrl core: registered pin 85 (SDMMC3_1P8_EN) on INT33FF:03
cherryview-pinctrl INT33FF:03: failed to lookup the default state
cherryview-pinctrl INT33FF:03: failed to lookup the sleep state
gpiochip_find_base: found new base at 318
Executing Method \_SB_.GPO3._REG
gpiochip_add: registered GPIOs 318 to 372 on device: INT33FF:03
GPIO chip INT33FF:03: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7
GPIO chip INT33FF:03: created GPIO range 8->19 ==> INT33FF:03 PIN 15->26
GPIO chip INT33FF:03: created GPIO range 20->25 ==> INT33FF:03 PIN 30->35
GPIO chip INT33FF:03: created GPIO range 26->33 ==> INT33FF:03 PIN 45->52
GPIO chip INT33FF:03: created GPIO range 34->43 ==> INT33FF:03 PIN 60->69
GPIO chip INT33FF:03: created GPIO range 44->54 ==> INT33FF:03 PIN 75->85
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
e820: reserve RAM buffer [mem 0x7a980000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b278000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b27c000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0400-0x047f] has been reserved
system 00:00: [io 0x0500-0x05fe] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [mem 0x9143a000-0x9143afff] has been reserved
system 00:01: [mem 0x91438000-0x91438fff] has been reserved
system 00:01: [mem 0x91436000-0x91436fff] has been reserved
system 00:01: [mem 0x91425000-0x91425fff] has been reserved
system 00:01: [mem 0x91423000-0x91423fff] has been reserved
system 00:01: [mem 0x91421000-0x91421fff] has been reserved
system 00:01: [mem 0x9141f000-0x9141ffff] has been reserved
system 00:01: [mem 0x9141d000-0x9141dfff] has been reserved
system 00:01: [mem 0x9141b000-0x9141bfff] has been reserved
system 00:01: [mem 0x91419000-0x91419fff] has been reserved
system 00:01: [mem 0x91434000-0x91434fff] has been reserved
system 00:01: [mem 0x91432000-0x91432fff] has been reserved
system 00:01: [mem 0x91430000-0x91430fff] has been reserved
system 00:01: [mem 0x9142e000-0x9142efff] has been reserved
system 00:01: [mem 0x9142c000-0x9142cfff] has been reserved
system 00:01: [mem 0x9142a000-0x9142afff] has been reserved
system 00:01: [mem 0x91428000-0x91428fff] has been reserved
system 00:01: [mem 0x91426000-0x91426fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:02: [mem 0xfed80000-0xfedbffff] could not be reserved
system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 4 devices
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x20000000-0x201fffff]
pci_bus 0000:00: resource 11 [mem 0x7cc00001-0x7ec00000]
pci_bus 0000:00: resource 12 [mem 0x80000000-0xdfffffff]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19908K (ffff88003590e000 - ffff880036c7f000)
microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x363
microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x363
microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x363
microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x363
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1462060816.388:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0x80000000, mapped to 0xffffc90004480000, using 4160k, total 4160k
efifb: mode is 1366x768x32, linelength=5504, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 170x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x33000020
intel_idle: v0.4 model 0x4C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (0 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.8-ckt7-ecs+ xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 7 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.8-ckt7-ecs+ xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Can't read CTR while initializing i8042
i8042: probe of i8042 failed with error -5
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: only 24-hr supported
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-acpi 80860F14:00: No vmmc regulator found
sdhci-acpi 80860F14:00: No vqmmc regulator found
mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
sdhci-acpi 80860F14:01: GPIO lookup for consumer WL_REG_ON
sdhci-acpi 80860F14:01: using ACPI for GPIO lookup
acpi 80860F14:01: GPIO: looking up WL_REG_ON-gpios
acpi 80860F14:01: GPIO: looking up WL_REG_ON-gpio
acpi 80860F14:01: GPIO: looking up 0 in _CRS
sdhci-acpi 80860F14:01: using lookup tables for GPIO lookup
cherryview-pinctrl INT33FF:01: request pin 23 (SEC_GPIO_SUS8) for INT33FF:01:414
mmc0: BKOPS_EN bit is not set
mmc0: new HS200 MMC card at address 0001
usb 1-2: new full-speed USB device number 2 using xhci_hcd
sdhci-acpi 80860F14:01: No vmmc regulator found
sdhci-acpi 80860F14:01: No vqmmc regulator found
mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
sdhci-acpi 80860F14:03: GPIO lookup for consumer 80860F14:03 cd
sdhci-acpi 80860F14:03: using ACPI for GPIO lookup
acpi 80860F14:03: GPIO: looking up 80860F14:03 cd-gpios
acpi 80860F14:03: GPIO: looking up 80860F14:03 cd-gpio
acpi 80860F14:03: GPIO: looking up 0 in _CRS
cherryview-pinctrl INT33FF:03: request pin 81 (SDMMC3_CD_B) for INT33FF:03:368
sdhci-acpi 80860F14:03: No vmmc regulator found
sdhci-acpi 80860F14:03: No vqmmc regulator found
mmc2: SDHCI controller on ACPI [80860F14:03] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
tsc: Refined TSC clocksource calibration: 1439.953 MHz
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 935677538aaab9dbd10a99e4b7f4ee97552d5cd1'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 0:26:0
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1416K (ffffffff81d2a000 - ffffffff81e8c000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 108K (ffff8800027e5000 - ffff880002800000)
Freeing unused kernel memory: 292K (ffff880002bb7000 - ffff880002c00000)
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
systemd-udevd[125]: starting version 204
usb 1-2: New USB device found, idVendor=04f3, idProduct=074a
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: ITE Device(8910)
usb 1-2: Manufacturer: ITE Tech. Inc.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
mmc1: new ultra high speed DDR50 SDIO card at address 0001
input: ITE Tech. Inc. ITE Device(8910) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:04F3:074A.0001/input/input2
Driver 'mmcblk' needs updating - please use bus_type methods
mmcblk0: mmc0:0001 SDW32G 29.1 GiB
mmcblk0boot0: mmc0:0001 SDW32G partition 1 4.00 MiB
mmcblk0boot1: mmc0:0001 SDW32G partition 2 4.00 MiB
mmcblk0rpmb: mmc0:0001 SDW32G partition 3 4.00 MiB
mmcblk0: p1 p2 p3
hid-generic 0003:04F3:074A.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [ITE Tech. Inc. ITE Device(8910)] on usb-0000:00:14.0-2/input0
input: ITE Tech. Inc. ITE Device(8910) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:04F3:074A.0002/input/input3
hid-generic 0003:04F3:074A.0002: input,hidraw1: USB HID v1.11 Mouse [ITE Tech. Inc. ITE Device(8910)] on usb-0000:00:14.0-2/input1
usb 1-3: new high-speed USB device number 3 using xhci_hcd
usb 1-3: New USB device found, idVendor=04f2, idProduct=b58c
usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-3: Product: HD camera
usb 1-3: Manufacturer: Chicony Electronics Co.,Ltd.
usb 1-3: SerialNumber: 200901010001
Switched to clocksource tsc
EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
EXT4-fs (mmcblk0p2): write access will be enabled during recovery
EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
EXT4-fs (mmcblk0p2): recovery complete
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 46 bits of entropy available
init: plymouth-upstart-bridge main process (187) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (196) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (200) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (202) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
systemd-udevd[316]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
8086228A:00: ttyS1 at MMIO 0x91422000 (irq = 39, base_baud = 2764800) is a 16550A
8086228A:01: ttyS2 at MMIO 0x91420000 (irq = 40, base_baud = 2764800) is a 16550A
soc_button_array INTCFD9:00: GPIO lookup for consumer soc_button_array
soc_button_array INTCFD9:00: using ACPI for GPIO lookup
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpios
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpio
acpi INTCFD9:00: GPIO: looking up 2 in _CRS
soc_button_array INTCFD9:00: using lookup tables for GPIO lookup
soc_button_array INTCFD9:00: lookup for GPIO soc_button_array failed
soc_button_array INTCFD9:00: GPIO lookup for consumer soc_button_array
soc_button_array INTCFD9:00: using ACPI for GPIO lookup
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpios
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpio
acpi INTCFD9:00: GPIO: looking up 3 in _CRS
soc_button_array INTCFD9:00: using lookup tables for GPIO lookup
soc_button_array INTCFD9:00: lookup for GPIO soc_button_array failed
soc_button_array INTCFD9:00: GPIO lookup for consumer soc_button_array
soc_button_array INTCFD9:00: using ACPI for GPIO lookup
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpios
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpio
acpi INTCFD9:00: GPIO: looking up 0 in _CRS
cherryview-pinctrl INT33FF:02: request pin 8 (PMU_PWRBTN_B) for INT33FF:02:381
soc_button_array INTCFD9:00: GPIO lookup for consumer soc_button_array
soc_button_array INTCFD9:00: using ACPI for GPIO lookup
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpios
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpio
acpi INTCFD9:00: GPIO: looking up 1 in _CRS
soc_button_array INTCFD9:00: using lookup tables for GPIO lookup
soc_button_array INTCFD9:00: lookup for GPIO soc_button_array failed
soc_button_array INTCFD9:00: GPIO lookup for consumer soc_button_array
soc_button_array INTCFD9:00: using ACPI for GPIO lookup
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpios
acpi INTCFD9:00: GPIO: looking up soc_button_array-gpio
acpi INTCFD9:00: GPIO: looking up 4 in _CRS
soc_button_array INTCFD9:00: using lookup tables for GPIO lookup
soc_button_array INTCFD9:00: lookup for GPIO soc_button_array failed
Executing Method \_SB_.PCI0.I2C1._REG
Executing Method \_SB_.PCI0.I2C1._REG
Executing Method \_SB_.PCI0.I2C2._REG
Executing Method \_SB_.PCI0.I2C3._REG
Executing Method \_SB_.PCI0.I2C3._REG
Executing Method \_SB_.PCI0.I2C3._REG
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cherryview-pinctrl INT33FF:01: request pin 31 (TCK) for INT33FF:01:420
ACPI: Battery Slot [BATC] (battery present)
dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI H4 protocol initialized
acpi INT33F4:00: GPIO: looking up 0 in _CRS
axp20x i2c-INT33F4:00: AXP20x variant AXP288 found
hci_bcm BCM2E96:00: GPIO lookup for consumer device-wakeup
hci_bcm BCM2E96:00: using ACPI for GPIO lookup
acpi BCM2E96:00: GPIO: looking up device-wakeup-gpios
acpi BCM2E96:00: GPIO: _DSD returned BCM2E96:00 3 1 0 0
cherryview-pinctrl INT33FF:01: request pin 1 (GPIO_DFX_3) for INT33FF:01:398
hci_bcm BCM2E96:00: GPIO lookup for consumer shutdown
hci_bcm BCM2E96:00: using ACPI for GPIO lookup
acpi BCM2E96:00: GPIO: looking up shutdown-gpios
acpi BCM2E96:00: GPIO: _DSD returned BCM2E96:00 3 2 0 0
cherryview-pinctrl INT33FF:01: request pin 24 (GPIO_SUS2) for INT33FF:01:415
hci_bcm BCM2E96:00: BCM2E96:00 device registered.
Bluetooth: turn off bt chip
Bluetooth: HCI UART protocol BCM registered
Executing Method \_SB_.PCI0.I2C7.PMI1._REG
Executing Method \_SB_.PCI0.I2C7.PMI1._REG
Executing Method \_SB_.PCI0.I2C7.PMI1._REG
axp20x i2c-INT33F4:00: AXP20X driver loaded
Executing Method \_SB_.PCI0.I2C7._REG
Executing Method \_SB_.PCI0.I2C7._REG
Executing Method \_SB_.PCI0.I2C7._REG
Executing Method \_SB_.PCI0.I2C7._REG
mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
snd-soc-dummy snd-soc-dummy: codec register snd-soc-dummy
snd-soc-dummy snd-soc-dummy: ASoC: dai register snd-soc-dummy #1
snd-soc-dummy snd-soc-dummy: ASoC: Registered DAI 'snd-soc-dummy-dai'
snd-soc-dummy snd-soc-dummy: ASoC: Registered codec 'snd-soc-dummy'
snd-soc-dummy snd-soc-dummy: ASoC: platform register snd-soc-dummy
snd-soc-dummy snd-soc-dummy: ASoC: Registered platform 'snd-soc-dummy'
acpi 10EC5645:00: GPIO: looking up 0 in _CRS
rt5645 i2c-10EC5645:00: GPIO lookup for consumer hp-detect
rt5645 i2c-10EC5645:00: using ACPI for GPIO lookup
acpi 10EC5645:00: GPIO: looking up hp-detect-gpios
acpi 10EC5645:00: GPIO: looking up hp-detect-gpio
acpi 10EC5645:00: GPIO: looking up 0 in _CRS
cherryview-pinctrl INT33FF:03: request pin 79 (ILB_SERIRQ) for INT33FF:03:366
i2c-10EC5645:00 supply avdd not found, using dummy regulator
i2c-10EC5645:00 supply cpvdd not found, using dummy regulator
sst-mfld-platform sst-mfld-platform: ASoC: platform register sst-mfld-platform
sst-mfld-platform sst-mfld-platform: ASoC: Registered platform 'sst-mfld-platform'
sst-mfld-platform sst-mfld-platform: ASoC: dai register sst-mfld-platform #5
sst-mfld-platform sst-mfld-platform: ASoC: Registered DAI 'media-cpu-dai'
sst-mfld-platform sst-mfld-platform: ASoC: Registered DAI 'compress-cpu-dai'
sst-mfld-platform sst-mfld-platform: ASoC: Registered DAI 'ssp0-port'
sst-mfld-platform sst-mfld-platform: ASoC: Registered DAI 'ssp1-port'
sst-mfld-platform sst-mfld-platform: ASoC: Registered DAI 'ssp2-port'
intel_sst_acpi 808622A8:00: LPE base: 0x91000000 size:0x200000
intel_sst_acpi 808622A8:00: IRAM base: 0x910c0000
intel_sst_acpi 808622A8:00: DRAM base: 0x91100000
intel_sst_acpi 808622A8:00: SHIM base: 0x91140000
intel_sst_acpi 808622A8:00: Mailbox base: 0x91144000
intel_sst_acpi 808622A8:00: DDR base: 0x20000000
intel_sst_acpi 808622A8:00: Got drv data max stream 25
wmi: Mapper loaded
brcmfmac: F1 signature read @0x18000000=0x1602a94c
brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43340 rev 2 pmurev 20
usbcore: registered new interface driver brcmfmac
rt5645 i2c-10EC5645:00: codec register i2c-10EC5645:00
rt5645 i2c-10EC5645:00: ASoC: dai register i2c-10EC5645:00 #2
rt5645 i2c-10EC5645:00: ASoC: Registered DAI 'rt5645-aif1'
rt5645 i2c-10EC5645:00: ASoC: Registered DAI 'rt5645-aif2'
rt5645 i2c-10EC5645:00: ASoC: Registered codec 'i2c-10EC5645:00'
[drm] Initialized drm 1.1.0 20060810
random: nonblocking pool is initialized
SSE version of gcm_enc/dec engaged.
[drm] Memory usable by graphics device = 2048M
checking generic (80000000 410000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
media: Linux media interface: v0.10
Linux video capture interface: v2.00
brcmf_sdio_readshared: invalid sdpcm_shared address 0xFE9E0161
brcmf_sdio_readshared: invalid sdpcm_shared address 0xFE9E0161
brcmf_c_preinit_dcmds: Firmware version = wl0: Jan 20 2014 11:06:06 version 6.10.190.43 (r449836) FWID 01-77015d04
uvcvideo: Found UVC 1.00 device HD camera (04f2:b58c)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
input: HD camera as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input4
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
audit: type=1400 audit(1462060824.661:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=446 comm="apparmor_parser"
audit: type=1400 audit(1462060824.661:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=446 comm="apparmor_parser"
audit: type=1400 audit(1462060824.661:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=446 comm="apparmor_parser"
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
cherryview-pinctrl INT33FF:02: request pin 8 (PMU_PWRBTN_B) for INT33FF:02:381
input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915_bpo 1.6.0 20151010 for 0000:00:02.0 on minor 0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: binding Audio Port at idx 0
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: binding Compressed Port at idx 1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: binding SSP2-Codec at idx 2
sst-mfld-platform sst-mfld-platform: ASoC: adding ssp2 Tx widget
sst-mfld-platform sst-mfld-platform: ASoC: adding ssp2 Rx widget
sst-mfld-platform sst-mfld-platform: ASoC: adding ssp1 Tx widget
sst-mfld-platform sst-mfld-platform: ASoC: adding ssp1 Rx widget
sst-mfld-platform sst-mfld-platform: ASoC: adding ssp0 Tx widget
sst-mfld-platform sst-mfld-platform: ASoC: adding ssp0 Rx widget
sst-mfld-platform sst-mfld-platform: ASoC: adding Compress Playback widget
sst-mfld-platform sst-mfld-platform: ASoC: adding Headset Playback widget
sst-mfld-platform sst-mfld-platform: ASoC: adding Headset Capture widget
rt5645 i2c-10EC5645:00: ASoC: adding AIF2 Playback widget
rt5645 i2c-10EC5645:00: ASoC: adding AIF2 Capture widget
rt5645 i2c-10EC5645:00: ASoC: adding AIF1 Playback widget
rt5645 i2c-10EC5645:00: ASoC: adding AIF1 Capture widget
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 0 late -2
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 1 late -2
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 2 late -2
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 0 late -1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 1 late -1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 2 late -1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 0 late 0
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 1 late 0
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 2 late 0
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 0 late 1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 1 late 1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 2 late 1
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 0 late 2
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: registered pcm #0 Audio (*)
cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai media-cpu-dai mapping ok
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 1 late 2
compress asoc: snd-soc-dummy-dai compress-cpu-dai mapping ok
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: probe chtrt5645 dai link 2 late 2
cht-bsw-rt5645 cht-bsw-rt5645: ASoC: registered pcm #2 ((null))
cht-bsw-rt5645 cht-bsw-rt5645: rt5645-aif1 ssp2-port mapping ok
rt5645 i2c-10EC5645:00: AIF2 Playback -> AIF2RX
rt5645 i2c-10EC5645:00: AIF2TX -> AIF2 Capture
rt5645 i2c-10EC5645:00: AIF1 Playback -> AIF1RX
rt5645 i2c-10EC5645:00: AIF1TX -> AIF1 Capture
SSP2-Codec: connected DAI link sst-mfld-platform:ssp2 Tx -> i2c-10EC5645:00:AIF1 Playback
SSP2-Codec: connected DAI link i2c-10EC5645:00:AIF1 Capture -> sst-mfld-platform:ssp2 Rx
input: chtrt5645 Headset Jack as /devices/pci0000:00/808622A8:00/cht-bsw-rt5645/sound/card0/input7
rt5645 i2c-10EC5645:00: gpio_state = 0
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
init: failsafe main process (649) killed by TERM signal
init: samba-ad-dc main process (700) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
audit: type=1400 audit(1462060849.185:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=803 comm="apparmor_parser"
audit: type=1400 audit(1462060849.185:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=803 comm="apparmor_parser"
audit: type=1400 audit(1462060849.365:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=870 comm="apparmor_parser"
audit: type=1400 audit(1462060849.365:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=870 comm="apparmor_parser"
audit: type=1400 audit(1462060849.369:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=875 comm="apparmor_parser"
audit: type=1400 audit(1462060849.377:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/mission-control-5" pid=874 comm="apparmor_parser"
audit: type=1400 audit(1462060849.377:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-*" pid=874 comm="apparmor_parser"
audit: type=1400 audit(1462060849.377:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="pxgsettings" pid=874 comm="apparmor_parser"
audit: type=1400 audit(1462060849.377:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=874 comm="apparmor_parser"
audit: type=1400 audit(1462060849.377:14): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/telepathy/telepathy-ofono" pid=874 comm="apparmor_parser"
brcmf_add_if: ERROR: netdev:wlan0 already exists
brcmf_add_if: ignore IF event
sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 0 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 1 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 2 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_out tx interleaver slot 3 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_0 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in0_1 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_0 doesn't have DAPM widget!!!
sst-mfld-platform sst-mfld-platform: Slot control: codec_in rx deinterleaver codec_in1_1 doesn't have DAPM widget!!!
Bluetooth: turn on bt chip
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1242) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Bluetooth: hci0: BCM: chip id 82
Bluetooth: hci0: BCM43341B0 (002.001.014) build 0000
Bluetooth: hci0: BCM (002.001.014) build 0158
Bluetooth: hci0: set bdaddr to 94:a1:a2:b3:19:0f
init: anacron main process (1022) killed by TERM signal
Audio Port: ASoC: found 12 audio capture paths
Audio Port: connected new DPCM capture path Audio Port SSP2-Codec
SSP2-Codec: ASoC: pop wq checking: AIF1 Playback status: inactive waiting: yes
Audio Port: ASoC: pop wq checking: Playback status: inactive waiting: yes
Audio Port: ASoC: found 8 audio playback paths
Audio Port: connected new DPCM playback path Audio Port -> SSP2-Codec
Audio Port: ASoC: found 1 new BE paths
SSP2-Codec: ASoC: open playback BE SSP2-Codec
Audio Port: ASoC: open FE Audio Port
SSP2-Codec: ASoC: hw_params BE Audio Port
rt5645 i2c-10EC5645:00: Sysclk is 24576000Hz and clock id is 1
rt5645 i2c-10EC5645:00: bclk is 1536000Hz and lrck is 48000Hz
rt5645 i2c-10EC5645:00: bclk_ms is 0 and pre_div is 1 for iis 0
sst-mfld-platform sst-mfld-platform: Enter: enable=1 port_name=ssp2-port
Audio Port: ASoC: hw_params FE Audio Port rate 48000 chan 2 fmt 2
Audio Port: ASoC: prepare FE Audio Port
SSP2-Codec: ASoC: prepare BE Audio Port
intel_sst_acpi 808622A8:00: Alloc for str 1 pipe 0x90
SSP2-Codec: ASoC: BE SSP2-Codec event 1 dir 0
Audio Port: ASoC: prepare FE Audio Port
SSP2-Codec: ASoC: BE SSP2-Codec event 1 dir 0
Audio Port: ASoC: pre trigger FE Audio Port cmd 1
SSP2-Codec: ASoC: trigger BE Audio Port cmd 1
Audio Port: ASoC: pre trigger FE Audio Port cmd 0
SSP2-Codec: ASoC: trigger BE Audio Port cmd 0
Audio Port: ASoC: hw_free FE Audio Port
SSP2-Codec: ASoC: hw_free BE Audio Port
Audio Port: ASoC: hw_free FE Audio Port
SSP2-Codec: ASoC: hw_free BE Audio Port
SSP2-Codec: ASoC: close BE Audio Port
sst-mfld-platform sst-mfld-platform: Enter: enable=0 port_name=ssp2-port
Audio Port: ASoC: close FE Audio Port
intel_sst_acpi 808622A8:00: Free for str 1 pipe 0x90
SSP2-Codec: ASoC: BE SSP2-Codec event 2 dir 0
rt5645 i2c-10EC5645:00: Sysclk is 0Hz and clock id is 2
Audio Port: ASoC: BE playback disconnect check for SSP2-Codec
Audio Port: freed DSP playback path Audio Port -> SSP2-Codec
SSP2-Codec: ASoC: pop wq checking: AIF1 Playback status: inactive waiting: yes
Audio Port: ASoC: pop wq checking: Playback status: inactive waiting: yes
perf interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5006 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
brcmf_cfg80211_del_key: invalid key index (4)
brcmf_cfg80211_del_key: invalid key index (5)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
cfg80211: Calling CRDA for country: UY
cfg80211: Regulatory domain changed to country: UY
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)