dmesg - passive_cooler
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Linux version 4.8.15-300.fc25.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 6.2.1 20160916 (Red Hat 6.2.1-2) (GCC) ) #1 SMP Thu Dec 15 23:10:23 UTC 2016
Command line: BOOT_IMAGE=/vmlinuz-4.8.15-300.fc25.x86_64 root=/dev/mapper/fedora_hal9000-root ro rd.lvm.lv=fedora_hal9000/root rd.lvm.lv=fedora_hal9000/swap rhgb quiet LANG=en_US.UTF-8 nouveau.modeset=0 rd.driver.blacklist=nouveau nomodeset gfxpayload=vga=normal
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000de97ffff] usable
BIOS-e820: [mem 0x00000000de980000-0x00000000df142fff] reserved
BIOS-e820: [mem 0x00000000df143000-0x00000000df396fff] ACPI NVS
BIOS-e820: [mem 0x00000000df397000-0x00000000df3a3fff] ACPI data
BIOS-e820: [mem 0x00000000df3a4000-0x00000000df3c2fff] ACPI NVS
BIOS-e820: [mem 0x00000000df3c3000-0x00000000df3c7fff] ACPI data
BIOS-e820: [mem 0x00000000df3c8000-0x00000000df40afff] ACPI NVS
BIOS-e820: [mem 0x00000000df40b000-0x00000000df7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000019effffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x0c6a7018-0x0c6b6057] usable ==> usable
e820: update [mem 0x0cb57018-0x0cb63857] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009efff] usable
reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000000c6a7017] usable
reserve setup_data: [mem 0x000000000c6a7018-0x000000000c6b6057] usable
reserve setup_data: [mem 0x000000000c6b6058-0x000000000cb57017] usable
reserve setup_data: [mem 0x000000000cb57018-0x000000000cb63857] usable
reserve setup_data: [mem 0x000000000cb63858-0x00000000de97ffff] usable
reserve setup_data: [mem 0x00000000de980000-0x00000000df142fff] reserved
reserve setup_data: [mem 0x00000000df143000-0x00000000df396fff] ACPI NVS
reserve setup_data: [mem 0x00000000df397000-0x00000000df3a3fff] ACPI data
reserve setup_data: [mem 0x00000000df3a4000-0x00000000df3c2fff] ACPI NVS
reserve setup_data: [mem 0x00000000df3c3000-0x00000000df3c7fff] ACPI data
reserve setup_data: [mem 0x00000000df3c8000-0x00000000df40afff] ACPI NVS
reserve setup_data: [mem 0x00000000df40b000-0x00000000df7fffff] usable
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000019effffff] usable
efi: EFI v2.31 by American Megatrends
efi: ACPI=0xdf397000 ACPI 2.0=0xdf397000 SMBIOS=0xdec29f98 MPS=0xfc930
SMBIOS 2.6 present.
DMI: RM plc RM ONE ECOQUIET 211/P8H61-I LX/RM/SI, BIOS 0303 07/06/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x19f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 100000000 mask F80000000 write-back
2 base 180000000 mask FF0000000 write-back
3 base 190000000 mask FF8000000 write-back
4 base 198000000 mask FFC000000 write-back
5 base 19C000000 mask FFE000000 write-back
6 base 19E000000 mask FFF000000 write-back
7 base 0E0000000 mask FE0000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcc10-0x000fcc1f] mapped at [ffff93af800fcc10]
Base memory trampoline at [ffff93af80098000] 98000 size 24576
BRK [0x2727c000, 0x2727cfff] PGTABLE
BRK [0x2727d000, 0x2727dfff] PGTABLE
BRK [0x2727e000, 0x2727efff] PGTABLE
BRK [0x2727f000, 0x2727ffff] PGTABLE
BRK [0x27280000, 0x27280fff] PGTABLE
BRK [0x27281000, 0x27281fff] PGTABLE
BRK [0x27282000, 0x27282fff] PGTABLE
BRK [0x27283000, 0x27283fff] PGTABLE
RAMDISK: [mem 0x3d1ed000-0x3e9eafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DF397000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DF397070 000064 (v01 RM plc RM210 01072009 AMI 00010013)
ACPI: FACP 0x00000000DF3A19A8 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DF397168 00A840 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 0x00000000DF3C1F80 000040
ACPI: APIC 0x00000000DF3A1AA0 000062 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000DF3A1B08 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DF3A1B48 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DF3A1B80 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DF3A1FE0 00079A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DF3A2780 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SLIC 0x00000000DF3A3218 000176 (v01 RM plc RM210 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000019effffff]
NODE_DATA(0) allocated [mem 0x19efe5000-0x19effbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000019effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000de97ffff]
node 0: [mem 0x00000000df40b000-0x00000000df7fffff]
node 0: [mem 0x0000000100000000-0x000000019effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000019effffff]
On node 0 totalpages: 1563923
DMA zone: 64 pages used for memmap
DMA zone: 24 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14198 pages used for memmap
DMA32 zone: 908661 pages, LIFO batch:31
Normal zone: 10176 pages used for memmap
Normal zone: 651264 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x0c6a7000-0x0c6a7fff]
PM: Registered nosave memory: [mem 0x0c6b6000-0x0c6b6fff]
PM: Registered nosave memory: [mem 0x0cb57000-0x0cb57fff]
PM: Registered nosave memory: [mem 0x0cb63000-0x0cb63fff]
PM: Registered nosave memory: [mem 0xde980000-0xdf142fff]
PM: Registered nosave memory: [mem 0xdf143000-0xdf396fff]
PM: Registered nosave memory: [mem 0xdf397000-0xdf3a3fff]
PM: Registered nosave memory: [mem 0xdf3a4000-0xdf3c2fff]
PM: Registered nosave memory: [mem 0xdf3c3000-0xdf3c7fff]
PM: Registered nosave memory: [mem 0xdf3c8000-0xdf40afff]
PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff93b11ec00000 s108760 r8192 d30504 u1048576
pcpu-alloc: s108760 r8192 d30504 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1539461
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.15-300.fc25.x86_64 root=/dev/mapper/fedora_hal9000-root ro rd.lvm.lv=fedora_hal9000/root rd.lvm.lv=fedora_hal9000/swap rhgb quiet LANG=en_US.UTF-8 nouveau.modeset=0 rd.driver.blacklist=nouveau nomodeset gfxpayload=vga=normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 5853840K/6255692K available (8226K kernel code, 1416K rwdata, 3340K rodata, 1608K init, 1520K bss, 401852K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
NR_IRQS:65792 nr_irqs:440 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2300.177 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.35 BogoMIPS (lpj=2300177)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 4 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffffa60f6000 - ffffffffa60fe000)
ftrace: allocating 30769 entries in 121 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 1
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Pentium(R) CPU G630T @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9204.51 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdf143000-0xdf396fff] (2441216 bytes)
PM: Registering ACPI NVS region [mem 0xdf3a4000-0xdf3c2fff] (126976 bytes)
PM: Registering ACPI NVS region [mem 0xdf3c8000-0xdf40afff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 15:47:44, date: 12/30/16
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93B117352000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93B1172B2800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93B116C60A00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf6109000-0xf610900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6107000-0xf61073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf6100000-0xf6103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6106000-0xf61063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf090-0xf09f]
pci 0000:00:1f.2: reg 0x24: [io 0xf080-0xf08f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6105000-0xf61050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.5: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.5: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.5: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.5: reg 0x20: [io 0xf030-0xf03f]
pci 0000:00:1f.5: reg 0x24: [io 0xf020-0xf02f]
pci 0000:01:00.0: [10de:1245] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf4000000-0xf5ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xe8000000-0xebffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:01:00.1: [10de:0bee] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xec104000-0xec104fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xec100000-0xec103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x0c6a7018-0x0fffffff]
e820: reserve RAM buffer [mem 0x0cb57018-0x0fffffff]
e820: reserve RAM buffer [mem 0xde980000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
e820: reserve RAM buffer [mem 0x19f000000-0x19fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x0200-0x020f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xec200000-0xec200fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xec300000-0xec4fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xec500000-0xec6fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf60fffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xebffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xec300000-0xec4fffff]
pci 0000:00:1c.0: bridge window [mem 0xec500000-0xec6fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.5: bridge window [mem 0xec100000-0xec1fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf60fffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xebffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xec300000-0xec4fffff]
pci_bus 0000:02: resource 2 [mem 0xec500000-0xec6fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xec100000-0xec1fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 24568K (ffff93afbd1ed000 - ffff93afbe9eb000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xda980000-0xde980000] (64MB) mapped at [ffff93b05a980000-ffff93b05e97ffff]
futex hash table entries: 512 (order: 3, 32768 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1483112864.743:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=37 max_order=21 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xe9000000, using 1876k, total 1875k
efifb: mode is 800x600x32, linelength=3200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 100x37
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 19
ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 19
ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xf6107000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.15-300.fc25.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6106000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.15-300.fc25.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: 673bb02beed63197377aec66b8b55b48fda09690'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Magic number: 12:120:792
rtc_cmos 00:02: setting system clock to 2016-12-30 15:47:46 UTC (1483112866)
PM: Hibernation image not present or could not be loaded.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
tsc: Refined TSC clocksource calibration: 2300.016 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2127442937e, max_idle_ns: 440795203349 ns
usb 2-1.1: new low-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=1ddd, idProduct=2819
usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2.00: failed to resume link (SControl 30)
ata1.01: failed to resume link (SControl 0)
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
ata1.01: SATA link down (SStatus 0 SControl 0)
ata1.00: ATA-9: TS32GSSD370S, O0918B, max UDMA/133
ata1.00: 62533296 sectors, multi 2: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA TS32GSSD370S 8B PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: Switched to clocksource tsc
ata2.01: failed to resume link (SControl 0)
ata2.00: SATA link down (SStatus 4 SControl 30)
ata2.01: SATA link down (SStatus 0 SControl 0)
Freeing unused kernel memory: 1608K (ffffffffa5f64000 - ffffffffa60f6000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1996K (ffff93afa680d000 - ffff93afa6a00000)
Freeing unused kernel memory: 756K (ffff93afa6d43000 - ffff93afa6e00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Listening on udev Control Socket.
audit: type=1130 audit(1483112868.701:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.702:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.729:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.795:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.815:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.855:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.872:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.888:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112868.952:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffbe66c0c70000, c8:60:00:ca:da:b6, XID 0c900800 IRQ 25
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
8021q: 802.1Q VLAN Support v1.8
[drm] Initialized drm 1.1.0 20060810
r8169 0000:03:00.0 enp3s0: renamed from eth0
nvidia: loading out-of-tree module taints kernel.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 245
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016
[drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
random: fast init done
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[153]: Received SIGTERM from PID 1 (systemd).
systemd: 15 output lines suppressed due to ratelimiting
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
EXT4-fs (dm-0): re-mounted. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-journald[528]: Received request to flush runtime journal from PID 1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPCB.GPBX) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
audit_printk_skb: 150 callbacks suppressed
audit: type=1130 audit(1483112871.130:61): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
asus_wmi: Number of fans: 1
Adding 3129340k swap on /dev/mapper/fedora_hal9000-swap. Priority:-1 extents:1 across:3129340k SSFS
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
audit: type=1130 audit(1483112871.313:62): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@8:3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
audit: type=1130 audit(1483112871.485:63): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112871.517:64): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1483112871.517:65): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1483112871.637:68): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1483112871.643:69): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1483112871.643:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
input: HID 1ddd:2819 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:1DDD:2819.0001/input/input15
hid-generic 0003:1DDD:2819.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 1ddd:2819] on usb-0000:00:1d.0-1.1/input0
input: HID 1ddd:2819 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:1DDD:2819.0002/input/input16
hid-generic 0003:1DDD:2819.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HID 1ddd:2819] on usb-0000:00:1d.0-1.1/input1
usb 2-1.2: new high-speed USB device number 4 using ehci-pci
usb 2-1.2: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.2: Product: USB2.0 Hub
hub 2-1.2:1.0: USB hub found
hub 2-1.2:1.0: 4 ports detected
usb 2-1.3: new high-speed USB device number 5 using ehci-pci
usb 2-1.3: New USB device found, idVendor=2001, idProduct=3c15
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: 11n Adapter
usb 2-1.3: Manufacturer: D-Link
usb 2-1.3: SerialNumber: 1.0
usb 2-1.2.4: new low-speed USB device number 6 using ehci-pci
usb 2-1.2.4: New USB device found, idVendor=1c4f, idProduct=0024
usb 2-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.2.4: Product: USB Keyboard
usb 2-1.2.4: Manufacturer: SIGMACHIP
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4:1.0/0003:1C4F:0024.0003/input/input17
hid-generic 0003:1C4F:0024.0003: input,hidraw2: USB HID v1.11 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.2.4/input0
input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.4/2-1.2.4:1.1/0003:1C4F:0024.0004/input/input18
usb 2-1.3: reset high-speed USB device number 5 using ehci-pci
hid-generic 0003:1C4F:0024.0004: input,hidraw3: USB HID v1.11 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1.2.4/input1
ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0222 detected
ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5372 detected
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 2-1.3:1.0 wlp0s29u1u3: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
random: crng init done
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-bb62f38e-5f2b-5eb2-e626-4c3c640c5232) @ PCI:0000:01:00.0
do_trap: 18 callbacks suppressed
traps: racer.bin[1407] trap divide error ip:f7356486 sp:fffc7b40 error:0 in libfmodex.so[f730d000+109000]
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
wlp0s29u1u3: authenticate with 78:f5:fd:d4:28:0d
wlp0s29u1u3: send auth to 78:f5:fd:d4:28:0d (try 1/3)
wlp0s29u1u3: send auth to 78:f5:fd:d4:28:0d (try 2/3)
wlp0s29u1u3: authenticated
wlp0s29u1u3: associate with 78:f5:fd:d4:28:0d (try 1/3)
wlp0s29u1u3: RX AssocResp from 78:f5:fd:d4:28:0d (capab=0x401 status=0 aid=1)
wlp0s29u1u3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u3: link becomes ready
traps: plugin-containe[1903] general protection ip:7f7eb6f00faf sp:7ffe557daf60 error:0 in libflashplayer.so[7f7eb688d000+107b000]
traps: plugin-containe[1947] general protection ip:7f40aa300faf sp:7fffbfeabed0 error:0 in libflashplayer.so[7f40a9c8d000+107b000]
wlp0s29u1u3: authenticate with 78:f5:fd:d4:28:0d
wlp0s29u1u3: send auth to 78:f5:fd:d4:28:0d (try 1/3)
wlp0s29u1u3: authenticated
wlp0s29u1u3: associate with 78:f5:fd:d4:28:0d (try 1/3)
wlp0s29u1u3: RX AssocResp from 78:f5:fd:d4:28:0d (capab=0x401 status=0 aid=1)
wlp0s29u1u3: associated
perf: interrupt took too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp0s29u1u3: link is not ready
wlp0s29u1u3: authenticate with 78:f5:fd:d4:28:0d
wlp0s29u1u3: send auth to 78:f5:fd:d4:28:0d (try 1/3)
wlp0s29u1u3: authenticated
wlp0s29u1u3: associate with 78:f5:fd:d4:28:0d (try 1/3)
wlp0s29u1u3: RX AssocResp from 78:f5:fd:d4:28:0d (capab=0x401 status=0 aid=1)
wlp0s29u1u3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u3: link becomes ready
traps: plugin-containe[9970] general protection ip:7f3be7600faf sp:7ffc14c81d80 error:0 in libflashplayer.so[7f3be6f8d000+107b000]
perf: interrupt took too long (3141 > 3138), lowering kernel.perf_event_max_sample_rate to 63000