dmesg - koubi
Linux version 4.7.8 (root@pcyo) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Mon Dec 26 03:50:36 CET 2016
KERNEL supported cpus:
AMD AuthenticAMD
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffb7fff] ACPI data
BIOS-e820: [mem 0x00000000bffb8000-0x00000000bffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000bffe0000-0x00000000bffedfff] reserved
BIOS-e820: [mem 0x00000000bfff0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4N68T-M-V2, BIOS 1001 12/21/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 00000001c0000000 aka 7168M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000095000] 95000 size 24576
Using GB pages for direct mapping
BRK [0x01a86000, 0x01a86fff] PGTABLE
BRK [0x01a87000, 0x01a87fff] PGTABLE
BRK [0x01a88000, 0x01a88fff] PGTABLE
RAMDISK: [mem 0x360be000-0x37056fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB590 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BFFA0100 000054 (v01 122111 XSDT1515 20111221 MSFT 00000097)
ACPI: FACP 0x00000000BFFA0290 0000F4 (v03 122111 FACP1515 20111221 MSFT 00000097)
ACPI: DSDT 0x00000000BFFA0460 007CD5 (v01 A1706 A1706000 00000000 INTL 20060113)
ACPI: FACS 0x00000000BFFB8000 000040
ACPI: FACS 0x00000000BFFB8000 000040
ACPI: APIC 0x00000000BFFA0390 000090 (v01 122111 APIC1515 20111221 MSFT 00000097)
ACPI: MCFG 0x00000000BFFA0420 00003C (v01 122111 OEMMCFG 20111221 MSFT 00000097)
ACPI: OEMB 0x00000000BFFB8040 000071 (v01 122111 OEMB1515 20111221 MSFT 00000097)
ACPI: SRAT 0x00000000BFFA8140 0000D8 (v01 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000BFFA8220 000038 (v01 122111 OEMHPET0 20111221 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001bfffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009afff]
node 0: [mem 0x0000000000100000-0x00000000bff9ffff]
node 0: [mem 0x0000000100000000-0x00000001bfffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001bfffffff]
On node 0 totalpages: 1572666
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3994 pages, LIFO batch:0
DMA32 zone: 12223 pages used for memmap
DMA32 zone: 782240 pages, LIFO batch:31
Normal zone: 12288 pages used for memmap
Normal zone: 786432 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x508
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 6 CPUs, 3 hotplug CPUs
e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:6 nr_node_ids:1
percpu: Embedded 32 pages/cpu @ffff8801bfc00000 s91224 r8192 d31656 u262144
pcpu-alloc: s91224 r8192 d31656 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1548070
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x0e000000-0x0fffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
Memory: 6020604K/6290664K available (5166K kernel code, 921K rwdata, 1696K rodata, 1008K init, 620K bss, 270060K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=12 to nr_cpu_ids=6.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
NR_IRQS:4352 nr_irqs:472 16
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3314.860 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6629.72 BogoMIPS (lpj=3314860)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff819e4000 - ffffffff819ea000)
ftrace: allocating 21634 entries in 85 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X3 455 Processor (family: 0x10, model: 0x5, stepping: 0x3)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2
x86: Booted up 1 node, 3 CPUs
smpboot: Total of 3 processors activated (19889.66 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff] ==> [c0000000, dfffffff] and [f0000000, fe0bffff]
TOM2: 00000001c0000000 aka 7168M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xc0000000-0xdfffffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x1c0000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: platform does not support [PCIeHotplug PCIeCapability]
acpi PNP0A03:00: _OSC: not requesting control; platform does not support [PCIeCapability]
acpi PNP0A03:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: _OSC: platform willing to grant [PME AER]
acpi PNP0A03:00: _OSC failed (AE_SUPPORT); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xdeefb000-0xdeefbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xdeefac00-0xdeefacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
pci 0000:00:05.0: reg 0x10: [mem 0xdeef4000-0xdeef7fff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
pci 0000:00:07.0: reg 0x10: [mem 0xdeef9000-0xdeef9fff]
pci 0000:00:07.0: reg 0x14: [io 0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.0: reg 0x10: [io 0xd400-0xd407]
pci 0000:00:08.0: reg 0x14: [io 0xd080-0xd083]
pci 0000:00:08.0: reg 0x18: [io 0xd000-0xd007]
pci 0000:00:08.0: reg 0x1c: [io 0xcc00-0xcc03]
pci 0000:00:08.0: reg 0x20: [io 0xc880-0xc88f]
pci 0000:00:08.0: reg 0x24: [mem 0xdeef8000-0xdeef8fff]
pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
pci 0000:00:08.1: reg 0x10: [io 0xc800-0xc807]
pci 0000:00:08.1: reg 0x14: [io 0xc480-0xc483]
pci 0000:00:08.1: reg 0x18: [io 0xc400-0xc407]
pci 0000:00:08.1: reg 0x1c: [io 0xc080-0xc083]
pci 0000:00:08.1: reg 0x20: [io 0xc000-0xc00f]
pci 0000:00:08.1: reg 0x24: [mem 0xdeeef000-0xdeeeffff]
pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:04.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:04.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
pci 0000:02:00.0: [10de:1381] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xdc000000-0xddffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f]
pci 0000:02:00.0: reg 0x30: [mem 0xdef80000-0xdeffffff pref]
pci 0000:02:00.1: [10de:0fbc] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xdef7c000-0xdef7ffff]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xdef00000-0xdfffffff]
pci 0000:00:09.0: bridge window [mem 0xc0000000-0xddffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: Enabled 1 GPEs in block 20 to 5F
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
pnp 00:01: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x080f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0580-0x05ff] has been reserved
system 00:01: [io 0x0800-0x087f] could not be reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0d00-0x0d7f] has been reserved
system 00:01: [io 0x0d80-0x0dff] has been reserved
system 00:01: [io 0x1100-0x117f] has been reserved
system 00:01: [io 0x1180-0x11ff] has been reserved
system 00:01: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:01: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:01: [mem 0x000de000-0x000dffff window] has been reserved
system 00:01: [mem 0xfec80000-0x1fd93ffff] could not be reserved
system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:01: [mem 0xfefe1000-0xfefe1fff] has been reserved
system 00:01: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0230-0x023f] has been reserved
system 00:03: [io 0x0290-0x029f] has been reserved
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:05: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:09.0: PCI bridge to [bus 02]
pci 0000:00:09.0: bridge window [io 0xe000-0xefff]
pci 0000:00:09.0: bridge window [mem 0xdef00000-0xdfffffff]
pci 0000:00:09.0: bridge window [mem 0xc0000000-0xddffffff 64bit pref]
pci 0000:00:0b.0: PCI bridge to [bus 03]
pci 0000:00:0c.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xdef00000-0xdfffffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xddffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 15972K (ffff8800360be000 - ffff880037057000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ b4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1482780474.028:1): initialized
workingset: timestamp_bits=44 max_order=21 bucket_order=0
zbud: loaded
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: CPU2: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
rtc_cmos 00:00: setting system clock to 2016-12-26 19:27:54 UTC (1482780474)
Freeing unused kernel memory: 1008K (ffffffff818e8000 - ffffffff819e4000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 960K (ffff880001510000 - ffff880001600000)
Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
systemd-udevd[95]: starting version 215
random: systemd-udevd: uninitialized urandom read (16 bytes read, 3 bits of entropy available)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
SCSI subsystem initialized
libata version 3.00 loaded.
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr bc:ae:c5:97:b6:d9
forcedeth 0000:00:07.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xdeefac00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.7.8 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
pata_amd 0000:00:06.0: version 0.4.1
ohci-pci: OHCI PCI platform driver
scsi host0: pata_amd
scsi host1: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
scsi host2: sata_nv
scsi host3: sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 20
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 20
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
scsi host4: sata_nv
scsi host5: sata_nv
ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 23
ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 23
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 23, io mem 0xdeefb000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.7.8 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ata2: port disabled--ignoring
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-1: new low-speed USB device number 2 using ohci-pci
usb 2-1: New USB device found, idVendor=13ee, idProduct=0001
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: AND
usb 2-1: Manufacturer: MOON
usb 2-1: SerialNumber: @LAB
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: MOON AND as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:13EE:0001.0001/input/input3
hid-generic 0003:13EE:0001.0001: input,hidraw0: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:02.0-1/input0
usb 2-3: new low-speed USB device number 3 using ohci-pci
tsc: Refined TSC clocksource calibration: 3315.076 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fc8ee27127, max_idle_ns: 440795244445 ns
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access ATA WDC WD10EFRX-68J 1A01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdb] 4096-byte physical blocks
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 2-3: New USB device found, idVendor=04f3, idProduct=0103
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:04F3:0103.0002/input/input4
hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-0000:00:02.0-3/input0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/0003:04F3:0103.0003/input/input5
hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.11 Device [HID 04f3:0103] on usb-0000:00:02.0-3/input1
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: WDC WD10EFRX-68JCSN0, 01.01A01, max UDMA/133
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA WDC WD10EFRX-68J 1A01 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdc] 4096-byte physical blocks
sd 5:0:0:0: [sdc] Write Protect is off
sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1
sd 5:0:0:0: [sdc] Attached SCSI disk
random: nonblocking pool is initialized
platform microcode: firmware: direct-loading firmware amd-ucode/microcode_amd.bin
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: new patch_level=0x010000c8
microcode: CPU2: new patch_level=0x010000c8
md: md0 stopped.
md: bind
md: bind
md: kicking non-fresh sdc1 from array!
md: unbind
md: export_rdev(sdc1)
md: raid1 personality registered for level 1
md/raid1:md0: active with 1 out of 2 mirrors
created bitmap (8 pages) for device md0
md0: bitmap initialized from disk: read 1 pages, set 10844 of 14903 bits
md0: detected capacity change from 0 to 1000068874240
clocksource: Switched to clocksource tsc
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Expecting device dev-sda4.device...
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
fuse init (API version 7.25)
systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Failed to start Load Kernel Modules.
systemd[1]: Unit systemd-modules-load.service entered failed state.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted Configuration File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd-udevd[235]: starting version 215
Warning: Processor Platform Limit event detected, but not handled.
Consider compiling CPUfreq support into your kernel.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
ACPI: Power Button [PWRF]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000600-0x000000000000063F conflicts with OpRegion 0x0000000000000600-0x00000000000006FF (\_SB.PCI0.SBRG.ASOC.SMRG) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i2c i2c-0: nForce2 SMBus adapter at 0x700
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
snd_hda_intel 0000:00:05.0: Disabling MSI
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input8
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:09.0/0000:02:00.1/sound/card1/input9
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D0: dig-out=0x20/0x0
snd_hda_codec_via hdaudioC0D0: inputs:
snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
snd_hda_codec_via hdaudioC0D0: Line=0x1b
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 18
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 248
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016 (using threaded interrupts)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input11
input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input12
Adding 3127292k swap on /dev/sda4. Priority:-1 extents:1 across:3127292k FS
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[228]: Received request to flush runtime journal from PID 1
forcedeth 0000:00:07.0 eth0: MSI enabled
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vboxdrv: Found 3 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3315076341 Hz
vboxdrv: Successfully loaded version 5.1.12 (interface 0x00280000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
nvidia-modeset: Allocated GPU:0 (GPU-dcbd5b44-089d-d2b6-77ee-46c384943fd1) @ PCI:0000:02:00.0
Thunar[1172]: segfault at 20 ip 0000000000430df2 sp 00007ffff0bfae28 error 4 in thunar[400000+9a000]