dmesg - 1
Linux version 4.6.0-kali1-amd64 (devel@kali.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1kali1 (2016-07-21)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-kali1-amd64 root=/dev/sda1 ro initrd=/install/gtk/initrd.gz quiet
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dffeffff] usable
BIOS-e820: [mem 0x00000000dfff0000-0x00000000dfffffff] ACPI data
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
Hypervisor detected: KVM
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
MTRR: Disabled
CPU MTRRs all blank - virtualized system.
e820: last_pfn = 0xdfff0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x01d36000, 0x01d36fff] PGTABLE
BRK [0x01d37000, 0x01d37fff] PGTABLE
BRK [0x01d38000, 0x01d38fff] PGTABLE
BRK [0x01d39000, 0x01d39fff] PGTABLE
RAMDISK: [mem 0x34f5a000-0x367a4fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX )
ACPI: XSDT 0x00000000DFFF0030 00003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 0x00000000DFFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 0x00000000DFFF0470 00210F (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 0x00000000DFFF0200 000040
ACPI: FACS 0x00000000DFFF0200 000040
ACPI: APIC 0x00000000DFFF0240 000054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 0x00000000DFFF02A0 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
NODE_DATA(0) allocated [mem 0x11fff7000-0x11fffbfff]
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 1:1ffef001, primary cpu clock
kvm-clock: using sched offset of 9294600322 cycles
clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000dffeffff]
node 0: [mem 0x0000000100000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011fffffff]
On node 0 totalpages: 1048462
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14272 pages used for memmap
DMA32 zone: 913392 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 131072 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 1 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdfff0000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfffbffff]
PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
e820: [mem 0xe0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on KVM
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
percpu: Embedded 32 pages/cpu @ffff88011fc00000 s93720 r8192 d29160 u2097152
pcpu-alloc: s93720 r8192 d29160 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032057
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-kali1-amd64 root=/dev/sda1 ro initrd=/install/gtk/initrd.gz quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 4023300K/4193848K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 170548K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=1.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
NR_IRQS:33024 nr_irqs:256 16
Console: colour VGA+ 80x25
console [tty0] enabled
tsc: Detected 2593.994 MHz processor
Calibrating delay loop (skipped) preset value.. 5187.98 BogoMIPS (lpj=10375976)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Disabling memory control group subsystem
CPU: Physical Processor ID: 0
mce: CPU supports 0 MCE banks
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
ftrace: allocating 24381 entries in 96 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic enabled
Switched APIC routing to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: unsupported p6 CPU model 69 no PMU driver, software events only.
KVM setup paravirtual spinlock
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (5187.98 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffdfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:01.1: [8086:7111] type 00 class 0x01018a
pci 0000:00:01.1: reg 0x20: [io 0xd000-0xd00f]
pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe0ffffff pref]
pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 0x18: [io 0xd010-0xd017]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
pci 0000:00:06.0: [106b:003f] type 00 class 0x0c0310
pci 0000:00:06.0: reg 0x10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:07.0: quirk: [io 0x4000-0x403f] claimed by PIIX4 ACPI
pci 0000:00:07.0: quirk: [io 0x4100-0x410f] claimed by PIIX4 SMB
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io 0xd240-0xd247]
pci 0000:00:0d.0: reg 0x18: [io 0xd250-0xd257]
pci 0000:00:0d.0: reg 0x20: [io 0xd260-0xd26f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0806000-0xf0807fff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 2 GPEs in block 00 to 07
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdfff0000-0xdfffffff]
clocksource: Switched to clocksource kvm-clock
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp: PnP ACPI: found 2 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffdfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 24876K (ffff880034f5a000 - ffff8800367a5000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdbff0000-0xdfff0000] (64MB) mapped at [ffff8800dbff0000-ffff8800dffeffff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 10737418240 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-0 Joules
RAPL PMU: hw unit of domain package 2^-0 Joules
RAPL PMU: hw unit of domain dram 2^-0 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-0 Joules
platform rtc_cmos: registered platform RTC device (no PNP device found)
futex hash table entries: 256 (order: 2, 16384 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1481549818.993:1): initialized
Initialise system trusted keyring
workingset: timestamp_bits=37 max_order=20 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x0
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
zswap: loaded using pool lzo/zbud
rtc_cmos rtc_cmos: setting system clock to 2016-12-12 13:36:48 UTC (1481549808)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd urandom read with 1 bits of entropy available
scsi_mod: module verification failed: signature and/or required key missing - tainting kernel
SCSI subsystem initialized
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
libata version 3.00 loaded.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
input: ImExPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input2
e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:09:bd:81
e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
ohci-pci 0000:00:06.0: OHCI PCI host controller
ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 1
ohci-pci 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI PCI host controller
usb usb1: Manufacturer: Linux 4.6.0-kali1-amd64 ohci_hcd
usb usb1: SerialNumber: 0000:00:06.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
scsi host0: ahci
ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 21
ata_piix 0000:00:01.1: version 2.13
scsi host1: ata_piix
scsi host2: ata_piix
ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata3.00: configured for UDMA/33
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 63323456 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 63323456 512-byte logical blocks: (32.4 GB/30.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: new full-speed USB device number 2 using ohci-pci
tsc: Refined TSC clocksource calibration: 2593.526 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2562583911e, max_idle_ns: 440795220059 ns
usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 1-1: Product: USB Tablet
usb 1-1: Manufacturer: VirtualBox
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/0003:80EE:0021.0001/input/input3
hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
floppy0: no floppy controllers found
work still pending
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected virtualization oracle.
systemd[1]: Detected architecture x86-64.
random: nonblocking pool is initialized
systemd[1]: Set hostname to .
systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target Slices.
systemd[1]: Mounting Debug File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[236]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input5
ACPI: Sleep Button [SLPF]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
piix4_smbus 0000:00:07.0: SMBus Host Controller at 0x4100, revision 0
snd_intel8x0 0000:00:05.0: disable (unknown or VT-d) VM optimization
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 2:0:0:0: Attached scsi generic sg1 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input7
intel_rapl: no valid rapl domains found in package 0
ppdev: user-space parallel port driver
snd_intel8x0 0000:00:05.0: white list rate for 1028:0177 is 48000
Adding 2095100k swap on /dev/sda5. Priority:-1 extents:1 across:2095100k FS
floppy0: no floppy controllers found
work still pending
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Netfilter messages via NETLINK v0.30.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.24)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
loop: module loaded
FAT-fs (dm-0): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
e1000: eth0 NIC Link is Down
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: eth0 NIC Link is Down
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX