dmesg - test-run-one

Return To test-run-one System Information

Linux version 4.8.11-1-ck-k10 (squishy@ease) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Sat Nov 26 07:18:36 EST 2016
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfdeffff] usable
BIOS-e820: [mem 0x00000000cfdf0000-0x00000000cfdf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfdf3000-0x00000000cfdfffff] ACPI data
BIOS-e820: [mem 0x00000000cfe00000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. GA-MA78LM-S2H/GA-MA78LM-S2H, BIOS F11 05/20/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFF0000000 write-back
  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
  4 base 000100000000 mask FFFFE0000000 write-back
  5 base 000120000000 mask FFFFF0000000 write-back
  6 disabled
  7 disabled
TOM2: 0000000130000000 aka 4864M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xcfe00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f53c0-0x000f53cf] mapped at [ffff8800000f53c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x01d2c000, 0x01d2cfff] PGTABLE
BRK [0x01d2d000, 0x01d2dfff] PGTABLE
BRK [0x01d2e000, 0x01d2efff] PGTABLE
BRK [0x01d2f000, 0x01d2ffff] PGTABLE
RAMDISK: [mem 0x374f5000-0x37a71fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F6D80 000014 (v00 GBT   )
ACPI: RSDT 0x00000000CFDF3000 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CFDF3040 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CFDF30C0 00644C (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000CFDF0000 000040
ACPI: SSDT 0x00000000CFDF9600 00095E (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
ACPI: HPET 0x00000000CFDF9F80 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CFDF9FC0 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: TAMG 0x00000000CFDFA000 00033A (v01 GBT    GBT   B0 5455312E BG?? 48240101)
ACPI: APIC 0x00000000CFDF9540 0000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: Local APIC address 0xfee00000
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000012fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000cfdeffff]
  node   0: [mem 0x0000000100000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000012fffffff]
On node 0 totalpages: 1047950
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 13240 pages used for memmap
  DMA32 zone: 847344 pages, LIFO batch:31
  Normal zone: 3072 pages used for memmap
  Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfdf0000-0xcfdf2fff]
PM: Registered nosave memory: [mem 0xcfdf3000-0xcfdfffff]
PM: Registered nosave memory: [mem 0xcfe00000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14932177117180739 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff88012fc00000 s100824 r8192 d30248 u262144
pcpu-alloc: s100824 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031553
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xc4000000-0xc5ffffff] (32MB)
Aperture pointing to e820 RAM. Ignoring.
AGP: Your BIOS doesn't leave an aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3967972K/4191800K available (6243K kernel code, 979K rwdata, 1900K rodata, 1224K init, 1008K bss, 223828K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3013.186 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.02 BogoMIPS (lpj=23540515)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 2 ACPI AML tables successfully acquired and loaded

Security Framework initialized
Yama: becoming mindful.
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81c28000 - ffffffff81c2e000)
ftrace: allocating 24062 entries in 94 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
APIC calibration not consistent with PM-Timer: 93ms instead of 100ms
APIC delta adjusted to PM-Timer: 1255552 (1177074)
smpboot: CPU0: AMD Athlon(tm) II X2 250 Processor (family: 0x10, model: 0x6, stepping: 0x3)
Performance Events: AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000000f
process: System has AMD C1E enabled
process: Switch to broadcast mode on CPU0
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
process: Switch to broadcast mode on CPU1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12053.34 BogoMIPS)
MuQSS locality CPU 0 to 1: 2
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcfdf0000-0xcfdf2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 14931722236523437 ns
pinctrl core: initialized pinctrl subsystem
RTC time:  3:23:44, date: 12/04/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [c000, ffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
node 0 link 0: mmio [f0000000, fe02ffff]
node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-03] on node 0 link 0
bus: 00 [io  0x0000-0xffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0xe0400000-0xffffffff]
bus: 00 [mem 0xe0100000-0xe03fffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io  0xff00-0xff07]
pci 0000:00:11.0: reg 0x14: [io  0xfe00-0xfe03]
pci 0000:00:11.0: reg 0x18: [io  0xfd00-0xfd07]
pci 0000:00:11.0: reg 0x1c: [io  0xfc00-0xfc03]
pci 0000:00:11.0: reg 0x20: [io  0xfb00-0xfb0f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe02f000-0xfe02f3ff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe02e000-0xfe02efff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe02d000-0xfe02dfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe02c000-0xfe02c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe02b000-0xfe02bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe02a000-0xfe02afff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe029000-0xfe0290ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io  0xfa00-0xfa0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe024000-0xfe027fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe028000-0xfe028fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [10de:06e4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io  0xef00-0xef7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io  0xde00-0xdeff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:06.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfdf0000-0xcfffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x04d0-0x04d1] has been reserved
system 00:00: [io  0x0220-0x0225] has been reserved
system 00:00: [io  0x0290-0x0294] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:01: [io  0x4100-0x411f] has been reserved
system 00:01: [io  0x0228-0x022f] has been reserved
system 00:01: [io  0x040b] has been reserved
system 00:01: [io  0x04d6] has been reserved
system 00:01: [io  0x0c00-0x0c01] has been reserved
system 00:01: [io  0x0c14] has been reserved
system 00:01: [io  0x0c50-0x0c52] has been reserved
system 00:01: [io  0x0c6c-0x0c6d] has been reserved
system 00:01: [io  0x0c6f] has been reserved
system 00:01: [io  0x0cd0-0x0cd1] has been reserved
system 00:01: [io  0x0cd2-0x0cd3] has been reserved
system 00:01: [io  0x0cd4-0x0cdf] has been reserved
system 00:01: [io  0x4000-0x40fe] has been reserved
system 00:01: [io  0x4210-0x4217] has been reserved
system 00:01: [io  0x0b00-0x0b0f] has been reserved
system 00:01: [io  0x0b10-0x0b1f] has been reserved
system 00:01: [io  0x0b20-0x0b3f] has been reserved
system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x000ce200-0x000cffff] has been reserved
system 00:06: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:06: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:06: [mem 0xcfdf0000-0xcfdfffff] could not be reserved
system 00:06: [mem 0xffff0000-0xffffffff] has been reserved
system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:06: [mem 0x00100000-0xcfdeffff] could not be reserved
system 00:06: [mem 0xcfe00000-0xcfefffff] has been reserved
system 00:06: [mem 0xcff00000-0xcfffffff] could not be reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] could not be reserved
system 00:06: [mem 0xfff80000-0xfffeffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:06.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:06.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
pci 0000:00:14.4:   bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
random: fast init done
Freeing initrd memory: 5620K (ffff8800374f5000 - ffff880037a72000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=20 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler bfq registered
BFQ I/O-scheduler: v8r5 (with cgroups support)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90000200000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
ACPI: ACPI: processor limited to max C-state 1
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
  Magic number: 12:474:360
rtc_cmos 00:02: setting system clock to 2016-12-04 03:23:46 UTC (1480821826)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1224K (ffffffff81af6000 - ffffffff81c28000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1932K (ffff88000161d000 - ffff880001800000)
Freeing unused kernel memory: 148K (ffff8800019db000 - ffff880001a00000)
MuQSS CPU scheduler v0.144 by Con Kolivas.
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Floppy drive(s): fd0 is 1.44M
scsi host0: pata_atiixp
scsi host1: pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe02c000
FDC 0 is a post-1991 82077
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe029000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe02e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe02d000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe02b000
serio: i8042 KBD port at 0x60,0x64 irq 1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe02a000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe028000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: HPA detected: current 625134191, native 625142448
ata3.00: ATA-8: WDC WD3200AAJS-00G0A0, 40.00A40, max UDMA/133
ata3.00: 625134191 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 0A40 PQ: 0 ANSI: 5
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: WDC WD3200AAJS-65B4A0, 01.03A01, max UDMA/133
ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: HPA detected: current 976764911, native 976773168
ata4.00: ATA-8: ST3500418AS, CC46, max UDMA/133
ata4.00: 976764911 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata6.00: ATAPI: HL-DT-ST DVDRAM GH40F, MG01, max UDMA/100
ata6.00: configured for UDMA/100
usb 4-2: new low-speed USB device number 2 using ohci-pci
scsi 3:0:0:0: Direct-Access     ATA      ST3500418AS      CC46 PQ: 0 ANSI: 5
scsi 4:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-6 3A01 PQ: 0 ANSI: 5
scsi 5:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH40F     MG01 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625134191 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] 976764911 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] Attached SCSI disk
 sdb:
sd 3:0:0:0: [sdb] Attached SCSI disk
sr 5:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: [sda] Attached SCSI disk
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:046D:C05A.0001/input/input1
hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-2/input0
raid6: sse2x1   gen()  3953 MB/s
tsc: Refined TSC clocksource calibration: 3013.327 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b6f7313610, max_idle_ns: 440795349584 ns
raid6: sse2x1   xor()  4179 MB/s
raid6: sse2x2   gen()  6577 MB/s
raid6: sse2x2   xor()  6890 MB/s
usb 4-3: new low-speed USB device number 3 using ohci-pci
raid6: sse2x4   gen()  7757 MB/s
raid6: sse2x4   xor()  4349 MB/s
raid6: using algorithm sse2x4 gen() 7757 MB/s
raid6: .... xor() 4349 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse: 11753.472 MB/sec
   generic_sse: 11687.936 MB/sec
xor: using function: prefetch64-sse (11753.472 MB/sec)
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/0003:046D:C31C.0002/input/input2
Btrfs loaded, crc32c=crc32c-generic
BTRFS: device label Arch devid 1 transid 26540 /dev/sda
BTRFS: device label Arch devid 2 transid 26540 /dev/sdc
BTRFS: device fsid be9f133e-0699-4d48-83a7-973349862527 devid 1 transid 1275 /dev/sdb
hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.1-3/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/0003:046D:C31C.0003/input/input3
hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.1-3/input1
clocksource: Switched to clocksource tsc
BTRFS info (device sdc): disk space caching is enabled
BTRFS info (device sdc): has skinny extents
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Login Prompts.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
vboxguest: loading out-of-tree module taints kernel.
vboxguest: PCI device not found, probably running on physical hardware.
vboxguest: PCI device not found, probably running on physical hardware.
random: crng init done
[drm] Initialized drm 1.1.0 20060810
vboxguest: PCI device not found, probably running on physical hardware.
vboxdrv: Found 2 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3013329673 Hz
vboxdrv: Successfully loaded version 5.1.10 (interface 0x00280000)
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
BTRFS info (device sdc): use lzo compression
BTRFS info (device sdc): disk space caching is enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.98  Mon Sep 19 17:31:03 PDT 2016
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc90000016000, 6c:f0:49:d9:fc:ea, XID 083000c0 IRQ 26
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
BTRFS info (device sdb): use lzo compression
BTRFS info (device sdb): disk space caching is enabled
BTRFS info (device sdb): has skinny extents
acpi_cpufreq: overriding BIOS provided _PSD data
r8169 0000:02:00.0 enp2s0: renamed from eth0
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
snd_hda_codec_realtek hdaudioC0D0:      CD=0x1c
snd_hda_codec_realtek hdaudioC0D0:    dig-in=0x1f
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: PC Speaker as /devices/platform/pcspkr/input/input11
mousedev: PS/2 mouse device common for all mice
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SOR1) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
systemd[1]: Started Journal Service.
systemd-journald[189]: Received request to flush runtime journal from PID 1
microcode: CPU0: new patch_level=0x010000c8
microcode: CPU1: new patch_level=0x010000c8
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
r8169 0000:02:00.0 enp2s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
fuse init (API version 7.25)
QDBusConnection[4069]: segfault at 0 ip 00007fa149a929cf sp 00007fa133ffe9c0 error 4 in libQt5Core.so.5.7.0[7fa1497dc000+4c7000]
CE: hpet increased min_delta_ns to 20115 nsec
dde-dock[4364]: segfault at 20 ip 00007f8b0edbff44 sp 00007ffd10588210 error 6 in libQt5Core.so.5.7.0[7f8b0ed1c000+4c7000]
dde-dock[5034]: segfault at 20 ip 00007f96338def44 sp 00007ffe209a4680 error 6 in libQt5Core.so.5.7.0[7f963383b000+4c7000]
QDBusConnection[8156]: segfault at 0 ip 00007f36dbe629cf sp 00007f36ca46d9c0 error 4 in libQt5Core.so.5.7.0[7f36dbbac000+4c7000]
QXcbEventReader[7034]: segfault at 7f7d8bd14449 ip 00007f7d8bd14449 sp 00007f7d8a21bc20 error 14 in libvorbisenc.so.2.0.11[7f7d8c1dd000+91000]
QDBusConnection[8864]: segfault at 13b7478 ip 00000000013b7478 sp 00007f13939c79b8 error 15
dde-desktop[9475]: segfault at 0 ip 00007f7395496605 sp 00007ffc6ce19410 error 4 in libQt5Core.so.5.7.0[7f73951ff000+4c7000]
nvclock[13392]: segfault at 9f03 ip 0000000000413dac sp 00007ffef9fa7160 error 4 in nvclock[400000+21000]
x86/PAT: nvclock_gtk:13750 freeing invalid memtype [mem 0xfa000000-0xfa00ffff]
QXcbEventReader[27896]: segfault at 7f494290e449 ip 00007f494290e449 sp 00007f493faaade0 error 14 in libXdmcp.so.6.0.0[7f4942dd7000+5000]
r8169 0000:02:00.0 enp2s0: link down
r8169 0000:02:00.0 enp2s0: link up

Return To test-run-one System Information