dmesg - nvidia
862112] usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 77 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi40 : usb-storage 2-4.2:1.2
scsi 40:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 40:0:0:0: Attached scsi generic sg3 type 0
sd 40:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 76
usb 2-4.2: USB disconnect, device number 77
usblp0: removed
usb 2-4: clear tt 1 (94d9) error -19
usb 2-4: new high-speed USB device number 78 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 79 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 79 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi41 : usb-storage 2-4.2:1.2
scsi 41:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 41:0:0:0: Attached scsi generic sg3 type 0
sd 41:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 78
usb 2-4.2: USB disconnect, device number 79
usblp0: removed
usb 2-4: clear tt 1 (94f9) error -19
usb 2-4: new high-speed USB device number 80 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 81 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 81 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi42 : usb-storage 2-4.2:1.2
scsi 42:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 42:0:0:0: Attached scsi generic sg3 type 0
sd 42:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 80
usb 2-4.2: USB disconnect, device number 81
usblp0: removed
usb 2-4: clear tt 1 (9519) error -19
usb 2-4: new high-speed USB device number 82 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 83 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 83 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi43 : usb-storage 2-4.2:1.2
scsi 43:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 43:0:0:0: Attached scsi generic sg3 type 0
sd 43:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 82
usb 2-4.2: USB disconnect, device number 83
usblp0: removed
usb 2-4: clear tt 1 (9539) error -19
usb 2-4: new high-speed USB device number 84 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 85 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 85 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi44 : usb-storage 2-4.2:1.2
scsi 44:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 44:0:0:0: Attached scsi generic sg3 type 0
sd 44:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 84
usb 2-4.2: USB disconnect, device number 85
usblp0: removed
usb 2-4: clear tt 1 (9559) error -19
usb 2-4: new high-speed USB device number 86 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 87 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 87 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi45 : usb-storage 2-4.2:1.2
scsi 45:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 45:0:0:0: Attached scsi generic sg3 type 0
sd 45:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 86
usb 2-4.2: USB disconnect, device number 87
usblp0: removed
usb 2-4: new high-speed USB device number 88 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 89 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 89 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi46 : usb-storage 2-4.2:1.2
scsi 46:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 46:0:0:0: Attached scsi generic sg3 type 0
sd 46:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 88
usb 2-4.2: USB disconnect, device number 89
usblp0: removed
usb 2-4: clear tt 1 (9599) error -19
usb 2-4: new high-speed USB device number 90 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 91 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 91 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi47 : usb-storage 2-4.2:1.2
scsi 47:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 47:0:0:0: Attached scsi generic sg3 type 0
sd 47:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 90
usb 2-4.2: USB disconnect, device number 91
usblp0: removed
usb 2-4: clear tt 1 (15b8) error -19
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: new high-speed USB device number 92 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 93 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 93 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi48 : usb-storage 2-4.2:1.2
scsi 48:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 48:0:0:0: Attached scsi generic sg3 type 0
sd 48:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 92
usb 2-4.2: USB disconnect, device number 93
usblp0: removed
usb 2-4: clear tt 1 (95d9) error -19
usb 2-4: new high-speed USB device number 94 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 95 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 95 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi49 : usb-storage 2-4.2:1.2
scsi 49:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 49:0:0:0: Attached scsi generic sg3 type 0
sd 49:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 94
usb 2-4.2: USB disconnect, device number 95
usblp0: removed
usb 2-4: new high-speed USB device number 96 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 97 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 97 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi50 : usb-storage 2-4.2:1.2
scsi 50:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 50:0:0:0: Attached scsi generic sg3 type 0
sd 50:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 96
usb 2-4.2: USB disconnect, device number 97
usb 2-4: clear tt 1 (9619) error -19
usblp0: removed
scsi 50:0:0:0: rejecting I/O to offline device
scsi 50:0:0:0: killing request
usb 2-4: new high-speed USB device number 98 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 99 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 99 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi51 : usb-storage 2-4.2:1.2
scsi 51:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 51:0:0:0: Attached scsi generic sg3 type 0
sd 51:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 98
usb 2-4.2: USB disconnect, device number 99
usblp0: removed
usb 2-4: clear tt 1 (9639) error -19
usb 2-4: new high-speed USB device number 100 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 101 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 101 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi52 : usb-storage 2-4.2:1.2
scsi 52:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 52:0:0:0: Attached scsi generic sg3 type 0
sd 52:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 100
usb 2-4.2: USB disconnect, device number 101
usblp0: removed
usb 2-4: clear tt 1 (9659) error -19
usb 2-4: new high-speed USB device number 102 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 103 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 103 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi53 : usb-storage 2-4.2:1.2
scsi 53:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 53:0:0:0: Attached scsi generic sg3 type 0
sd 53:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 102
usb 2-4.2: USB disconnect, device number 103
usblp0: removed
usb 2-4: new high-speed USB device number 104 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 105 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 105 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi54 : usb-storage 2-4.2:1.2
scsi 54:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 54:0:0:0: Attached scsi generic sg3 type 0
sd 54:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 104
usb 2-4.2: USB disconnect, device number 105
usblp0: removed
usb 2-4: clear tt 1 (9699) error -19
usb 2-4: new high-speed USB device number 106 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 107 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 107 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi55 : usb-storage 2-4.2:1.2
scsi 55:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 55:0:0:0: Attached scsi generic sg3 type 0
sd 55:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 106
usb 2-4.2: USB disconnect, device number 107
usblp0: removed
usb 2-4: clear tt 1 (96b9) error -19
usb 2-4: new high-speed USB device number 108 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 109 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 109 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi56 : usb-storage 2-4.2:1.2
scsi 56:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 56:0:0:0: Attached scsi generic sg3 type 0
sd 56:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 108
usb 2-4.2: USB disconnect, device number 109
usblp0: removed
usb 2-4: clear tt 1 (96d9) error -19
usb 2-4: new high-speed USB device number 110 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 111 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 111 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi57 : usb-storage 2-4.2:1.2
scsi 57:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 57:0:0:0: Attached scsi generic sg3 type 0
sd 57:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 110
usb 2-4.2: USB disconnect, device number 111
usblp0: removed
usb 2-4: new high-speed USB device number 112 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 113 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 113 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi58 : usb-storage 2-4.2:1.2
scsi 58:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 58:0:0:0: Attached scsi generic sg3 type 0
sd 58:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 112
usb 2-4.2: USB disconnect, device number 113
usblp0: removed
usb 2-4: clear tt 1 (9719) error -19
usb 2-4: new high-speed USB device number 114 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 115 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 115 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi59 : usb-storage 2-4.2:1.2
scsi 59:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 59:0:0:0: Attached scsi generic sg3 type 0
sd 59:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 114
usb 2-4.2: USB disconnect, device number 115
usblp0: removed
usb 2-4: clear tt 1 (9739) error -19
usb 2-4: new high-speed USB device number 116 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 117 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 117 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi60 : usb-storage 2-4.2:1.2
scsi 60:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 60:0:0:0: Attached scsi generic sg3 type 0
sd 60:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 116
usb 2-4.2: USB disconnect, device number 117
usblp0: removed
usb 2-4: clear tt 1 (9759) error -19
usb 2-4: new high-speed USB device number 118 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 119 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 119 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi61 : usb-storage 2-4.2:1.2
scsi 61:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 61:0:0:0: Attached scsi generic sg3 type 0
sd 61:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 118
usb 2-4.2: USB disconnect, device number 119
usblp0: removed
usb 2-4: clear tt 1 (9779) error -19
scsi 61:0:0:0: rejecting I/O to offline device
scsi 61:0:0:0: killing request
usb 2-4: new high-speed USB device number 120 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 121 using ehci_hcd
usb 2-4: clear tt 1 (8790) error -71
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4: clear tt 1 (8790) error -71
usb 2-4.2: can't set config #1, error -71
usb 2-4: USB disconnect, device number 120
usb 2-4.2: USB disconnect, device number 121
usb 2-4: clear tt 1 (0790) error -71
usb 2-4: new high-speed USB device number 122 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 123 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 123 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi62 : usb-storage 2-4.2:1.2
scsi 62:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 62:0:0:0: Attached scsi generic sg3 type 0
sd 62:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 122
usb 2-4.2: USB disconnect, device number 123
usblp0: removed
usb 2-4: clear tt 1 (97b9) error -19
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: new high-speed USB device number 124 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 125 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 125 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi63 : usb-storage 2-4.2:1.2
scsi 63:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 63:0:0:0: Attached scsi generic sg3 type 0
sd 63:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 124
usb 2-4.2: USB disconnect, device number 125
usblp0: removed
usb 2-4: clear tt 1 (97d9) error -19
usb 2-4: new high-speed USB device number 126 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 127 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 127 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi64 : usb-storage 2-4.2:1.2
scsi 64:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 64:0:0:0: Attached scsi generic sg3 type 0
sd 64:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 126
usb 2-4.2: USB disconnect, device number 127
usblp0: removed
usb 2-4: clear tt 1 (97f9) error -19
usb 2-4: new high-speed USB device number 2 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 3 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi65 : usb-storage 2-4.2:1.2
scsi 65:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 65:0:0:0: Attached scsi generic sg3 type 0
sd 65:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 2
usb 2-4.2: USB disconnect, device number 3
usblp0: removed
usb 2-4: clear tt 1 (9039) error -19
usb 2-4: new high-speed USB device number 4 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 5 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi66 : usb-storage 2-4.2:1.2
scsi 66:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 66:0:0:0: Attached scsi generic sg3 type 0
sd 66:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 4
usb 2-4.2: USB disconnect, device number 5
usblp0: removed
usb 2-4: clear tt 1 (9059) error -19
usb 2-4: new high-speed USB device number 6 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 7 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi67 : usb-storage 2-4.2:1.2
scsi 67:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 67:0:0:0: Attached scsi generic sg3 type 0
sd 67:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 6
usb 2-4.2: USB disconnect, device number 7
usblp0: removed
usb 2-4: clear tt 1 (9079) error -19
usb 2-4: new high-speed USB device number 8 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 9 using ehci_hcd
usb 2-4: clear tt 1 (8000) error -71
usb 2-4: clear tt 1 (8000) error -71
hub 2-4:1.0: cannot reset port 2 (err = -71)
usb 2-4: clear tt 1 (8000) error -71
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-4:1.0: cannot disable port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-4:1.0: cannot disable port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-4:1.0: cannot disable port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: cannot reset port 2 (err = -71)
hub 2-4:1.0: Cannot enable port 2. Maybe the USB cable is bad?
hub 2-4:1.0: cannot disable port 2 (err = -71)
hub 2-4:1.0: unable to enumerate USB device on port 2
hub 2-4:1.0: cannot disable port 2 (err = -71)
usb 2-4: USB disconnect, device number 8
usb 2-4: new high-speed USB device number 13 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 14 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi68 : usb-storage 2-4.2:1.2
scsi 68:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 68:0:0:0: Attached scsi generic sg3 type 0
sd 68:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 13
usb 2-4.2: USB disconnect, device number 14
usblp0: removed
usb 2-4: clear tt 1 (90e9) error -19
usb 2-4: new high-speed USB device number 15 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 16 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi69 : usb-storage 2-4.2:1.2
scsi 69:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 69:0:0:0: Attached scsi generic sg3 type 0
sd 69:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 15
usb 2-4.2: USB disconnect, device number 16
usblp0: removed
usb 2-4: clear tt 1 (9109) error -19
usb 2-4: new high-speed USB device number 17 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 18 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi70 : usb-storage 2-4.2:1.2
scsi 70:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 70:0:0:0: Attached scsi generic sg3 type 0
sd 70:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 17
usb 2-4.2: USB disconnect, device number 18
usblp0: removed
usb 2-4: clear tt 1 (9129) error -19
usb 2-4: new high-speed USB device number 19 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 20 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 20 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi71 : usb-storage 2-4.2:1.2
scsi 71:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 71:0:0:0: Attached scsi generic sg3 type 0
sd 71:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 19
usb 2-4.2: USB disconnect, device number 20
usblp0: removed
usb 2-4: new high-speed USB device number 21 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 22 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 22 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi72 : usb-storage 2-4.2:1.2
scsi 72:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 72:0:0:0: Attached scsi generic sg3 type 0
sd 72:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 21
usb 2-4.2: USB disconnect, device number 22
usblp0: removed
usb 2-4: clear tt 1 (9169) error -19
usb 2-4: new high-speed USB device number 23 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 24 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 24 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi73 : usb-storage 2-4.2:1.2
scsi 73:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 73:0:0:0: Attached scsi generic sg3 type 0
sd 73:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 23
usb 2-4.2: USB disconnect, device number 24
usblp0: removed
usb 2-4: clear tt 1 (9189) error -19
usb 2-4: new high-speed USB device number 25 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 26 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 26 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi74 : usb-storage 2-4.2:1.2
scsi 74:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 74:0:0:0: Attached scsi generic sg3 type 0
sd 74:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 25
usb 2-4.2: USB disconnect, device number 26
usblp0: removed
usb 2-4: clear tt 1 (91a9) error -19
usb 2-4: new high-speed USB device number 27 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 28 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 28 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi75 : usb-storage 2-4.2:1.2
scsi 75:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 75:0:0:0: Attached scsi generic sg3 type 0
sd 75:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 27
usb 2-4.2: USB disconnect, device number 28
usblp0: removed
usb 2-4: new high-speed USB device number 29 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 30 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 30 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi76 : usb-storage 2-4.2:1.2
scsi 76:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 76:0:0:0: Attached scsi generic sg3 type 0
sd 76:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 29
usb 2-4.2: USB disconnect, device number 30
usblp0: removed
usb 2-4: clear tt 1 (91e9) error -19
usb 2-4: new high-speed USB device number 31 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 32 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 32 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi77 : usb-storage 2-4.2:1.2
scsi 77:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 77:0:0:0: Attached scsi generic sg3 type 0
sd 77:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 31
usb 2-4.2: USB disconnect, device number 32
usblp0: removed
usb 2-4: new high-speed USB device number 33 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 34 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 34 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi78 : usb-storage 2-4.2:1.2
scsi 78:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 78:0:0:0: Attached scsi generic sg3 type 0
sd 78:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 33
usb 2-4.2: USB disconnect, device number 34
usblp0: removed
usb 2-4: new high-speed USB device number 35 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 36 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 36 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi79 : usb-storage 2-4.2:1.2
scsi 79:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 79:0:0:0: Attached scsi generic sg3 type 0
sd 79:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 35
usb 2-4.2: USB disconnect, device number 36
usblp0: removed
usb 2-4: clear tt 1 (9249) error -19
usb 2-4: new high-speed USB device number 37 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 38 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 38 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi80 : usb-storage 2-4.2:1.2
scsi 80:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 80:0:0:0: Attached scsi generic sg3 type 0
sd 80:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 37
usb 2-4.2: USB disconnect, device number 38
usblp0: removed
usb 2-4: clear tt 1 (9269) error -19
usb 2-4: new high-speed USB device number 39 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 40 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 40 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi81 : usb-storage 2-4.2:1.2
scsi 81:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 81:0:0:0: Attached scsi generic sg3 type 0
sd 81:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 39
usb 2-4.2: USB disconnect, device number 40
usblp0: removed
usb 2-4: new high-speed USB device number 41 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 42 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 42 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi82 : usb-storage 2-4.2:1.2
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
scsi 82:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 82:0:0:0: Attached scsi generic sg3 type 0
sd 82:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 41
usb 2-4.2: USB disconnect, device number 42
usblp0: removed
usb 2-4: clear tt 1 (92a9) error -19
usb 2-4: new high-speed USB device number 43 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 44 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 44 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi83 : usb-storage 2-4.2:1.2
scsi 83:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 83:0:0:0: Attached scsi generic sg3 type 0
sd 83:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 43
usb 2-4.2: USB disconnect, device number 44
usblp0: removed
usb 2-4: clear tt 1 (92c9) error -19
usb 2-4: new high-speed USB device number 45 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 46 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 46 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi84 : usb-storage 2-4.2:1.2
scsi 84:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 84:0:0:0: Attached scsi generic sg3 type 0
sd 84:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 45
usb 2-4.2: USB disconnect, device number 46
usblp0: removed
usb 2-4: clear tt 1 (92e9) error -19
usb 2-4: new high-speed USB device number 47 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 48 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 48 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi85 : usb-storage 2-4.2:1.2
scsi 85:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 85:0:0:0: Attached scsi generic sg3 type 0
sd 85:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 47
usb 2-4.2: USB disconnect, device number 48
usblp0: removed
usb 2-4: clear tt 1 (9309) error -19
scsi 85:0:0:0: rejecting I/O to offline device
scsi 85:0:0:0: killing request
usb 2-4: new high-speed USB device number 49 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 50 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 50 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi86 : usb-storage 2-4.2:1.2
scsi 86:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 86:0:0:0: Attached scsi generic sg3 type 0
sd 86:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 49
usb 2-4.2: USB disconnect, device number 50
usblp0: removed
usb 2-4: clear tt 1 (9329) error -19
usb 2-4: new high-speed USB device number 51 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 52 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 52 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi87 : usb-storage 2-4.2:1.2
scsi 87:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 87:0:0:0: Attached scsi generic sg3 type 0
sd 87:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 51
usb 2-4.2: USB disconnect, device number 52
usblp0: removed
usb 2-4: clear tt 1 (9349) error -19
usb 2-4: new high-speed USB device number 53 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 54 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 54 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi88 : usb-storage 2-4.2:1.2
scsi 88:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 88:0:0:0: Attached scsi generic sg3 type 0
sd 88:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 53
usb 2-4.2: USB disconnect, device number 54
usblp0: removed
usb 2-4: new high-speed USB device number 55 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 56 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 56 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi89 : usb-storage 2-4.2:1.2
scsi 89:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 89:0:0:0: Attached scsi generic sg3 type 0
sd 89:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 55
usb 2-4.2: USB disconnect, device number 56
usblp0: removed
usb 2-4: clear tt 1 (9389) error -19
usb 2-4: new high-speed USB device number 57 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 58 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 58 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi90 : usb-storage 2-4.2:1.2
scsi 90:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 90:0:0:0: Attached scsi generic sg3 type 0
sd 90:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 57
usb 2-4.2: USB disconnect, device number 58
usblp0: removed
usb 2-4: new high-speed USB device number 59 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 60 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 60 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi91 : usb-storage 2-4.2:1.2
scsi 91:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 91:0:0:0: Attached scsi generic sg3 type 0
sd 91:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 59
usb 2-4.2: USB disconnect, device number 60
usblp0: removed
usb 2-4: clear tt 1 (93c9) error -19
usb 2-4: new high-speed USB device number 61 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 62 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 62 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi92 : usb-storage 2-4.2:1.2
scsi 92:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 92:0:0:0: Attached scsi generic sg3 type 0
sd 92:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 61
usb 2-4.2: USB disconnect, device number 62
usblp0: removed
usb 2-4: clear tt 1 (93e9) error -19
usb 2-4: new high-speed USB device number 63 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 64 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 64 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi93 : usb-storage 2-4.2:1.2
scsi 93:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 93:0:0:0: Attached scsi generic sg3 type 0
sd 93:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 63
usb 2-4.2: USB disconnect, device number 64
usblp0: removed
usb 2-4: clear tt 1 (9409) error -19
usb 2-4: new high-speed USB device number 65 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 66 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 66 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi94 : usb-storage 2-4.2:1.2
scsi 94:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 94:0:0:0: Attached scsi generic sg3 type 0
sd 94:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 65
usb 2-4.2: USB disconnect, device number 66
usblp0: removed
usb 2-4: clear tt 1 (9429) error -19
usb 2-4: new high-speed USB device number 67 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 68 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 68 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi95 : usb-storage 2-4.2:1.2
scsi 95:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 95:0:0:0: Attached scsi generic sg3 type 0
sd 95:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 67
usb 2-4.2: USB disconnect, device number 68
usblp0: removed
usb 2-4: new high-speed USB device number 69 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 70 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 70 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi96 : usb-storage 2-4.2:1.2
scsi 96:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 96:0:0:0: Attached scsi generic sg3 type 0
sd 96:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 69
usb 2-4.2: USB disconnect, device number 70
usblp0: removed
usb 2-4: clear tt 1 (9469) error -19
usb 2-4: new high-speed USB device number 71 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 72 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 72 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi97 : usb-storage 2-4.2:1.2
scsi 97:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 97:0:0:0: Attached scsi generic sg3 type 0
sd 97:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 71
usb 2-4.2: USB disconnect, device number 72
usblp0: removed
usb 2-4: new high-speed USB device number 73 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 74 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 74 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi98 : usb-storage 2-4.2:1.2
scsi 98:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 98:0:0:0: Attached scsi generic sg3 type 0
sd 98:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 73
usb 2-4.2: USB disconnect, device number 74
usblp0: removed
usb 2-4: clear tt 1 (94a9) error -19
usb 2-4: new high-speed USB device number 75 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 76 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 76 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi99 : usb-storage 2-4.2:1.2
scsi 99:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 99:0:0:0: Attached scsi generic sg3 type 0
usb 2-4: USB disconnect, device number 75
usb 2-4.2: USB disconnect, device number 76
usblp0: removed
usb 2-4: clear tt 1 (94c9) error -19
sd 99:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: new high-speed USB device number 77 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 78 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 78 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi100 : usb-storage 2-4.2:1.2
scsi 100:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 100:0:0:0: Attached scsi generic sg3 type 0
sd 100:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 77
usb 2-4.2: USB disconnect, device number 78
usblp0: removed
usb 2-4: clear tt 1 (94e9) error -19
usb 2-4: new high-speed USB device number 79 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 80 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 80 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi101 : usb-storage 2-4.2:1.2
scsi 101:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 101:0:0:0: Attached scsi generic sg3 type 0
sd 101:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 79
usb 2-4.2: USB disconnect, device number 80
usblp0: removed
usb 2-4: new high-speed USB device number 81 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 82 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 82 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi102 : usb-storage 2-4.2:1.2
scsi 102:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 102:0:0:0: Attached scsi generic sg3 type 0
sd 102:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 81
usb 2-4.2: USB disconnect, device number 82
usblp0: removed
usb 2-4: clear tt 1 (9529) error -19
usb 2-4: new high-speed USB device number 83 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 84 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 84 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi103 : usb-storage 2-4.2:1.2
scsi 103:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 103:0:0:0: Attached scsi generic sg3 type 0
sd 103:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 83
usb 2-4.2: USB disconnect, device number 84
usblp0: removed
usb 2-4: clear tt 1 (9549) error -19
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: new high-speed USB device number 85 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 86 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 86 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi104 : usb-storage 2-4.2:1.2
scsi 104:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 104:0:0:0: Attached scsi generic sg3 type 0
usb 2-4: USB disconnect, device number 85
usb 2-4.2: USB disconnect, device number 86
usblp0: removed
usb 2-4: clear tt 1 (9569) error -19
sd 104:0:0:0: [sdc] READ CAPACITY failed
sd 104:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 104:0:0:0: [sdc] Sense not available.
sd 104:0:0:0: [sdc] Write Protect is off
sd 104:0:0:0: [sdc] Mode Sense: 4d 41 4a 4f
sd 104:0:0:0: [sdc] Incomplete mode parameter data
sd 104:0:0:0: [sdc] Assuming drive cache: write through
sd 104:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: new high-speed USB device number 87 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 88 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 88 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi105 : usb-storage 2-4.2:1.2
scsi 105:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 105:0:0:0: Attached scsi generic sg3 type 0
sd 105:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 87
usb 2-4.2: USB disconnect, device number 88
usblp0: removed
usb 2-4: clear tt 1 (9589) error -19
usb 2-4: new high-speed USB device number 89 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 90 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 90 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi106 : usb-storage 2-4.2:1.2
scsi 106:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 106:0:0:0: Attached scsi generic sg3 type 0
usb 2-4: USB disconnect, device number 89
usb 2-4.2: USB disconnect, device number 90
usblp0: removed
usb 2-4: clear tt 1 (95a9) error -19
sd 106:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: new high-speed USB device number 91 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 92 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 92 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi107 : usb-storage 2-4.2:1.2
scsi 107:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 107:0:0:0: Attached scsi generic sg3 type 0
sd 107:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 91
usb 2-4.2: USB disconnect, device number 92
usblp0: removed
usb 2-4: clear tt 1 (95c9) error -19
usb 2-4: new high-speed USB device number 93 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 94 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 94 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi108 : usb-storage 2-4.2:1.2
scsi 108:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 108:0:0:0: Attached scsi generic sg3 type 0
sd 108:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 93
usb 2-4.2: USB disconnect, device number 94
usblp0: removed
usb 2-4: clear tt 1 (95e9) error -19
usb 2-4: new high-speed USB device number 95 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 96 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 96 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi109 : usb-storage 2-4.2:1.2
scsi 109:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 109:0:0:0: Attached scsi generic sg3 type 0
sd 109:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 95
usb 2-4.2: USB disconnect, device number 96
usblp0: removed
usb 2-4: clear tt 1 (9609) error -19
usb 2-4: new high-speed USB device number 97 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 98 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 98 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi110 : usb-storage 2-4.2:1.2
scsi 110:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 110:0:0:0: Attached scsi generic sg3 type 0
usb 2-4: USB disconnect, device number 97
usb 2-4.2: USB disconnect, device number 98
usblp0: removed
usb 2-4: clear tt 1 (9629) error -19
sd 110:0:0:0: [sdc] READ CAPACITY failed
sd 110:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 110:0:0:0: [sdc] Sense not available.
sd 110:0:0:0: [sdc] Write Protect is off
sd 110:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 110:0:0:0: [sdc] Asking for cache data failed
sd 110:0:0:0: [sdc] Assuming drive cache: write through
sd 110:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: new high-speed USB device number 99 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 100 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 100 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi111 : usb-storage 2-4.2:1.2
scsi 111:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 111:0:0:0: Attached scsi generic sg3 type 0
sd 111:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 99
usb 2-4.2: USB disconnect, device number 100
usblp0: removed
usb 2-4: clear tt 1 (9649) error -19
usb 2-4: new high-speed USB device number 101 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 102 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 102 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi112 : usb-storage 2-4.2:1.2
scsi 112:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 112:0:0:0: Attached scsi generic sg3 type 0
sd 112:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 101
usb 2-4.2: USB disconnect, device number 102
usblp0: removed
usb 2-4: new high-speed USB device number 103 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 104 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 104 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi113 : usb-storage 2-4.2:1.2
scsi 113:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 113:0:0:0: Attached scsi generic sg3 type 0
sd 113:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 103
usb 2-4.2: USB disconnect, device number 104
usblp0: removed
usb 2-4: clear tt 1 (9689) error -19
usb 2-4: new high-speed USB device number 105 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 106 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 106 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi114 : usb-storage 2-4.2:1.2
scsi 114:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 114:0:0:0: Attached scsi generic sg3 type 0
sd 114:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 105
usb 2-4.2: USB disconnect, device number 106
usblp0: removed
usb 2-4: clear tt 1 (96a9) error -19
usb 2-4: new high-speed USB device number 107 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 108 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 108 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi115 : usb-storage 2-4.2:1.2
scsi 115:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 115:0:0:0: Attached scsi generic sg3 type 0
sd 115:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 107
usb 2-4.2: USB disconnect, device number 108
usblp0: removed
usb 2-4: clear tt 1 (96c9) error -19
usb 2-4: new high-speed USB device number 109 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 110 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 110 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi116 : usb-storage 2-4.2:1.2
scsi 116:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 116:0:0:0: Attached scsi generic sg3 type 0
sd 116:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 109
usb 2-4.2: USB disconnect, device number 110
usb 2-4: clear tt 1 (96e9) error -19
usblp0: removed
scsi 116:0:0:0: rejecting I/O to offline device
scsi 116:0:0:0: killing request
usb 2-4: new high-speed USB device number 111 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 112 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 112 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi117 : usb-storage 2-4.2:1.2
scsi 117:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 117:0:0:0: Attached scsi generic sg3 type 0
sd 117:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through
usb 2-4: USB disconnect, device number 111
usb 2-4.2: USB disconnect, device number 112
usblp0: removed
usb 2-4: clear tt 1 (9709) error -19
usb 2-4: new high-speed USB device number 113 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 114 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 114 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi118 : usb-storage 2-4.2:1.2
scsi 118:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 118:0:0:0: Attached scsi generic sg3 type 0
sd 118:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 113
usb 2-4.2: USB disconnect, device number 114
usblp0: removed
usb 2-4: clear tt 1 (9729) error -19
usb 2-4: new high-speed USB device number 115 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 116 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 116 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi119 : usb-storage 2-4.2:1.2
scsi 119:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 119:0:0:0: Attached scsi generic sg3 type 0
sd 119:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 115
usb 2-4.2: USB disconnect, device number 116
usblp0: removed
usb 2-4: clear tt 1 (9749) error -19
usb 2-4: new high-speed USB device number 117 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 118 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 118 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi120 : usb-storage 2-4.2:1.2
scsi 120:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 120:0:0:0: Attached scsi generic sg3 type 0
sd 120:0:0:0: [sdc] Attached SCSI removable disk
usb 2-4: USB disconnect, device number 117
usb 2-4.2: USB disconnect, device number 118
usblp0: removed
usb 2-4: clear tt 1 (9769) error -19
usb 2-4: new high-speed USB device number 119 using ehci_hcd
usb 2-4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-4: Product: USB2.0 Hub
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 4 ports detected
usb 2-4.2: new full-speed USB device number 120 using ehci_hcd
usb 2-4.2: New USB device found, idVendor=04f9, idProduct=0222
usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-4.2: Product: DCP-195C
usb 2-4.2: Manufacturer: Brother
usb 2-4.2: SerialNumber: BROH0F455062
usblp0: USB Bidirectional printer dev 120 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0222
scsi121 : usb-storage 2-4.2:1.2
scsi 121:0:0:0: Direct-Access Brother DCP-195C 1.00 PQ: 0 ANSI: 2
sd 121:0:0:0: Attached scsi generic sg3 type 0
sd 121:0:0:0: [sdc] Attached SCSI removable disk
sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 6:0:0:0: [sdb] Asking for cache data failed
sd 6:0:0:0: [sdb] Assuming drive cache: write through