dmesg - testRAM
Linux version 4.8.0-22-generic (buildd@lgw01-11) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #24-Ubuntu SMP Sat Oct 8 09:15:00 UTC 2016 (Ubuntu 4.8.0-22.24-generic 4.8.0)
Command line: BOOT_IMAGE=/vmlinuz-4.8.0-22-generic root=/dev/mapper/tcc--container02--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000097fff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007f368fff] usable
BIOS-e820: [mem 0x000000007f369000-0x000000007f37efff] reserved
BIOS-e820: [mem 0x000000007f37f000-0x000000007f3bdfff] ACPI data
BIOS-e820: [mem 0x000000007f3be000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. PowerEdge R410/0N051F, BIOS 1.10.2 04/27/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-CFFFF write-back
D0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0100000000 mask FF00000000 write-back
2 base 0200000000 mask FE00000000 write-back
3 base 0400000000 mask FC00000000 write-back
4 base 0800000000 mask F800000000 write-back
5 base 1000000000 mask FF80000000 write-back
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7f369 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [ffff8e2fc00fe710]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff8e2fc0092000] 92000 size 24576
BRK [0x72d651000, 0x72d651fff] PGTABLE
BRK [0x72d652000, 0x72d652fff] PGTABLE
BRK [0x72d653000, 0x72d653fff] PGTABLE
BRK [0x72d654000, 0x72d654fff] PGTABLE
BRK [0x72d655000, 0x72d655fff] PGTABLE
BRK [0x72d656000, 0x72d656fff] PGTABLE
BRK [0x72d657000, 0x72d657fff] PGTABLE
RAMDISK: [mem 0x331e6000-0x358eafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F1070 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1174 00009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x000000007F3A3F9C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x000000007F37F000 003BAF (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 0x000000007F3A6000 000040
ACPI: FACS 0x000000007F3A6000 000040
ACPI: APIC 0x000000007F3A3478 00015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x000000007F3A35D8 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x000000007F3A362C 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 0x000000007F3A3668 0001B0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x000000007F3A38C4 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 0x000000007F3A3904 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x000000007F3A3A3C 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x000000007F382D50 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x000000007F382FC0 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x000000007F382BB0 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x000000007F382BE0 000170 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 0x000000007F3A3BC0 000370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x000000007F3A3F34 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 0x000000007F3A7000 0043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 0x10 -> Node 0
SRAT: PXM 2 -> APIC 0x00 -> Node 1
SRAT: PXM 1 -> APIC 0x12 -> Node 0
SRAT: PXM 2 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x14 -> Node 0
SRAT: PXM 2 -> APIC 0x04 -> Node 1
SRAT: PXM 1 -> APIC 0x16 -> Node 0
SRAT: PXM 2 -> APIC 0x06 -> Node 1
SRAT: PXM 1 -> APIC 0x11 -> Node 0
SRAT: PXM 2 -> APIC 0x01 -> Node 1
SRAT: PXM 1 -> APIC 0x13 -> Node 0
SRAT: PXM 2 -> APIC 0x03 -> Node 1
SRAT: PXM 1 -> APIC 0x15 -> Node 0
SRAT: PXM 2 -> APIC 0x05 -> Node 1
SRAT: PXM 1 -> APIC 0x17 -> Node 0
SRAT: PXM 2 -> APIC 0x07 -> Node 1
ACPI: SRAT: Node 1 PXM 2 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 1 PXM 2 [mem 0x100000000-0x87fffffff]
ACPI: SRAT: Node 0 PXM 1 [mem 0x880000000-0x107fffffff]
NUMA: Node 1 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
NODE_DATA(0) allocated [mem 0x107ffbe000-0x107ffc2fff]
NODE_DATA(1) allocated [mem 0x87fffb000-0x87fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000107fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 1: [mem 0x0000000000001000-0x0000000000097fff]
node 1: [mem 0x0000000000100000-0x000000007f368fff]
node 1: [mem 0x0000000100000000-0x000000087fffffff]
node 0: [mem 0x0000000880000000-0x000000107fffffff]
Initmem setup node 0 [mem 0x0000000880000000-0x000000107fffffff]
On node 0 totalpages: 8388608
Normal zone: 131072 pages used for memmap
Normal zone: 8388608 pages, LIFO batch:31
Initmem setup node 1 [mem 0x0000000000001000-0x000000087fffffff]
On node 1 totalpages: 8385280
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 8078 pages used for memmap
DMA32 zone: 516969 pages, LIFO batch:31
Normal zone: 122880 pages used for memmap
Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00098000-0x000fffff]
PM: Registered nosave memory: [mem 0x7f369000-0x7f37efff]
PM: Registered nosave memory: [mem 0x7f37f000-0x7f3bdfff]
PM: Registered nosave memory: [mem 0x7f3be000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xffffffff]
e820: [mem 0x80000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:2
percpu: Embedded 36 pages/cpu @ffff8e381fa00000 s107544 r8192 d31720 u262144
pcpu-alloc: s107544 r8192 d31720 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 [0] 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 [1] 17 19 21 23 25 27 29 31
Built 2 zonelists in Node order, mobility grouping on. Total pages: 16511773
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-22-generic root=/dev/mapper/tcc--container02--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 65916820K/67095552K available (8847K kernel code, 1427K rwdata, 3804K rodata, 1548K init, 1400K bss, 1178732K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
NR_IRQS:16640 nr_irqs:1224 16
Console: colour dummy device 80x25
console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.897 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.79 BogoMIPS (lpj=9575588)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffffa82e9000 - ffffffffa82f1000)
ftrace: allocating 33403 entries in 131 pages
smpboot: APIC(10) Converting physical 1 to logical package 0
smpboot: APIC(0) Converting physical 0 to logical package 1
smpboot: Max logical packages: 8
DMAR-IR: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (family: 0x6, model: 0x1a, stepping: 0x5)
Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #1, CPUs: #1
.... node #0, CPUs: #2
.... node #1, CPUs: #3
.... node #0, CPUs: #4
.... node #1, CPUs: #5
.... node #0, CPUs: #6
.... node #1, CPUs: #7
.... node #0, CPUs: #8
.... node #1, CPUs: #9
.... node #0, CPUs: #10
.... node #1, CPUs: #11
.... node #0, CPUs: #12
.... node #1, CPUs: #13
.... node #0, CPUs: #14
.... node #1, CPUs: #15
x86: Booted up 2 nodes, 16 CPUs
smpboot: Total of 16 processors activated (76604.70 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 21:13:14, date: 11/23/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: PCIe AER handled by firmware
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfdffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:3403] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0xdf0e0000-0xdf0e3fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0xdf0e4000-0xdf0e7fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0xdf0e8000-0xdf0ebfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0xdf0ec000-0xdf0effff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0xdf0f0000-0xdf0f3fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0xdf0f4000-0xdf0f7fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0xdf0f8000-0xdf0fbfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0xdf0fc000-0xdf0fffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xcc20-0xcc3f]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xcc40-0xcc5f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xdf0dd000-0xdf0dd3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xcc60-0xcc7f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xcc80-0xcc9f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xcca0-0xccbf]
pci 0000:00:1d.3: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xccc0-0xccdf]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xdf0de000-0xdf0de3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: [8086:3a25] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0xcc10-0xcc17]
pci 0000:00:1f.2: reg 0x14: [io 0xcc08-0xcc0b]
pci 0000:00:1f.2: reg 0x18: [io 0xcc18-0xcc1f]
pci 0000:00:1f.2: reg 0x1c: [io 0xcc0c-0xcc0f]
pci 0000:00:1f.2: reg 0x20: [io 0xcce0-0xccff]
pci 0000:00:1f.2: reg 0x24: [mem 0xdf0df000-0xdf0df7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:01:00.0: [14e4:163b] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xd8000000-0xd9ffffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [14e4:163b] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0xda000000-0xdbffffff 64bit]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff]
pci 0000:02:00.0: [1000:0058] type 00 class 0x010000
pci 0000:02:00.0: reg 0x10: [io 0xfc00-0xfcff]
pci 0000:02:00.0: reg 0x14: [mem 0xdf2ec000-0xdf2effff 64bit]
pci 0000:02:00.0: reg 0x1c: [mem 0xdf2f0000-0xdf2fffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xdf100000-0xdf1fffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:03:00.0: [111d:8018] type 01 class 0x060400
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PCI bridge to [bus 03-06]
pci 0000:00:07.0: bridge window [io 0xd000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xdd000000-0xdeffffff]
pci 0000:04:02.0: [111d:8018] type 01 class 0x060400
pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
pci 0000:04:04.0: [111d:8018] type 01 class 0x060400
pci 0000:04:04.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: bridge window [io 0xd000-0xefff]
pci 0000:03:00.0: bridge window [mem 0xdd000000-0xdeffffff]
pci 0000:05:00.0: [8086:10e8] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xde7c0000-0xde7dffff]
pci 0000:05:00.0: reg 0x14: [mem 0xde800000-0xdebfffff]
pci 0000:05:00.0: reg 0x18: [io 0xecc0-0xecdf]
pci 0000:05:00.0: reg 0x1c: [mem 0xde7b8000-0xde7bbfff]
pci 0000:05:00.0: reg 0x30: [mem 0xde000000-0xde3fffff pref]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
pci 0000:05:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
pci 0000:05:00.1: [8086:10e8] type 00 class 0x020000
pci 0000:05:00.1: reg 0x10: [mem 0xde7e0000-0xde7fffff]
pci 0000:05:00.1: reg 0x14: [mem 0xdec00000-0xdeffffff]
pci 0000:05:00.1: reg 0x18: [io 0xece0-0xecff]
pci 0000:05:00.1: reg 0x1c: [mem 0xde7bc000-0xde7bffff]
pci 0000:05:00.1: reg 0x30: [mem 0xde000000-0xde3fffff pref]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
pci 0000:05:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:05:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
pci 0000:04:02.0: PCI bridge to [bus 05]
pci 0000:04:02.0: bridge window [io 0xe000-0xefff]
pci 0000:04:02.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:04:02.0: bridge has subordinate 05 but max busn 06
pci 0000:06:00.0: [8086:10e8] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xdd7c0000-0xdd7dffff]
pci 0000:06:00.0: reg 0x14: [mem 0xdd800000-0xddbfffff]
pci 0000:06:00.0: reg 0x18: [io 0xdcc0-0xdcdf]
pci 0000:06:00.0: reg 0x1c: [mem 0xdd7b8000-0xdd7bbfff]
pci 0000:06:00.0: reg 0x30: [mem 0xdd000000-0xdd3fffff pref]
pci 0000:06:00.0: PME# supported from D0 D3hot
pci 0000:06:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
pci 0000:06:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
pci 0000:06:00.1: [8086:10e8] type 00 class 0x020000
pci 0000:06:00.1: reg 0x10: [mem 0xdd7e0000-0xdd7fffff]
pci 0000:06:00.1: reg 0x14: [mem 0xddc00000-0xddffffff]
pci 0000:06:00.1: reg 0x18: [io 0xdce0-0xdcff]
pci 0000:06:00.1: reg 0x1c: [mem 0xdd7bc000-0xdd7bffff]
pci 0000:06:00.1: reg 0x30: [mem 0xdd000000-0xdd3fffff pref]
pci 0000:06:00.1: PME# supported from D0 D3hot
pci 0000:06:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
pci 0000:06:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit]
pci 0000:06:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR3 for 8 VFs)
pci 0000:04:04.0: PCI bridge to [bus 06]
pci 0000:04:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:04.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:04:04.0: bridge has subordinate 06 but max busn 07
pci 0000:07:03.0: [102b:0532] type 00 class 0x030000
pci 0000:07:03.0: reg 0x10: [mem 0xd7800000-0xd7ffffff pref]
pci 0000:07:03.0: reg 0x14: [mem 0xdc7fc000-0xdc7fffff]
pci 0000:07:03.0: reg 0x18: [mem 0xdc800000-0xdcffffff]
pci 0000:07:03.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:1e.0: bridge window [mem 0xd7800000-0xd7ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfdffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
SCSI subsystem initialized
libata version 3.00 loaded.
vgaarb: setting as boot device: PCI:0000:07:03.0
vgaarb: device added: PCI:0000:07:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:03.0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus fe
PCI: root bus fe: using default resources
PCI: Probing PCI hardware (bus fe)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:fe
pci_bus 0000:fe: root bus resource [io 0x0000-0xffff]
pci_bus 0000:fe: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:fe: No busn resource found for root bus, will use [bus fe-ff]
pci_bus 0000:fe: busn_res: can not insert [bus fe-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:fe:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:fe:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:fe:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:fe:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:fe:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:fe:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:fe:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:fe:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:fe:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:fe:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:fe:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:fe:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:fe:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:fe:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:fe:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:fe:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:fe:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:fe:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:fe:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:fe:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:fe:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:fe:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:fe: busn_res: [bus fe-ff] end is updated to fe
pci_bus 0000:fe: busn_res: can not insert [bus fe] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci 0000:ff:00.0: [8086:2c40] type 00 class 0x060000
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.4: [8086:2c14] type 00 class 0x060000
pci 0000:ff:02.5: [8086:2c15] type 00 class 0x060000
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.2: [8086:2c1a] type 00 class 0x060000
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f369000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:04: [io 0x0800-0x087f] has been reserved
system 00:04: [io 0x0880-0x08ff] could not be reserved
system 00:04: [io 0x0900-0x091f] has been reserved
system 00:04: [io 0x0920-0x0923] has been reserved
system 00:04: [io 0x0924] has been reserved
system 00:04: [io 0x0c00-0x0c7f] has been reserved
system 00:04: [io 0x0ca0-0x0ca7] has been reserved
system 00:04: [io 0x0ca9-0x0cab] has been reserved
system 00:04: [io 0x0cad-0x0caf] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:05: [irq 0 disabled]
system 00:05: [io 0x0ca8] has been reserved
system 00:05: [io 0x0cac] has been reserved
system 00:05: Plug and Play ACPI device, IDs IPI0001 PNP0c01 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed90000-0xfed91fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:05:00.1: can't claim BAR 6 [mem 0xde000000-0xde3fffff pref]: address conflict with 0000:05:00.0 [mem 0xde000000-0xde3fffff pref]
pci 0000:06:00.1: can't claim BAR 6 [mem 0xdd000000-0xdd3fffff pref]: address conflict with 0000:06:00.0 [mem 0xdd000000-0xdd3fffff pref]
pci_bus 0000:00: max bus depth: 3 pci_try_num: 4
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdbffffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:03.0: bridge window [io 0xf000-0xffff]
pci 0000:00:03.0: bridge window [mem 0xdf100000-0xdf2fffff]
pci 0000:05:00.1: BAR 6: no space for [mem size 0x00400000 pref]
pci 0000:05:00.1: BAR 6: failed to assign [mem size 0x00400000 pref]
pci 0000:05:00.0: BAR 7: assigned [mem 0xde400000-0xde41ffff 64bit]
pci 0000:05:00.0: BAR 10: assigned [mem 0xde420000-0xde43ffff 64bit]
pci 0000:05:00.1: BAR 7: assigned [mem 0xde440000-0xde45ffff 64bit]
pci 0000:05:00.1: BAR 10: assigned [mem 0xde460000-0xde47ffff 64bit]
pci 0000:04:02.0: PCI bridge to [bus 05]
pci 0000:04:02.0: bridge window [io 0xe000-0xefff]
pci 0000:04:02.0: bridge window [mem 0xde000000-0xdeffffff]
pci 0000:06:00.1: BAR 6: no space for [mem size 0x00400000 pref]
pci 0000:06:00.1: BAR 6: failed to assign [mem size 0x00400000 pref]
pci 0000:06:00.0: BAR 7: assigned [mem 0xdd400000-0xdd41ffff 64bit]
pci 0000:06:00.0: BAR 10: assigned [mem 0xdd420000-0xdd43ffff 64bit]
pci 0000:06:00.1: BAR 7: assigned [mem 0xdd440000-0xdd45ffff 64bit]
pci 0000:06:00.1: BAR 10: assigned [mem 0xdd460000-0xdd47ffff 64bit]
pci 0000:04:04.0: PCI bridge to [bus 06]
pci 0000:04:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:04:04.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:03:00.0: PCI bridge to [bus 04-06]
pci 0000:03:00.0: bridge window [io 0xd000-0xefff]
pci 0000:03:00.0: bridge window [mem 0xdd000000-0xdeffffff]
pci 0000:00:07.0: PCI bridge to [bus 03-06]
pci 0000:00:07.0: bridge window [io 0xd000-0xefff]
pci 0000:00:07.0: bridge window [mem 0xdd000000-0xdeffffff]
pci 0000:07:03.0: BAR 6: assigned [mem 0xdc000000-0xdc00ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:1e.0: bridge window [mem 0xd7800000-0xd7ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfdffffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 1 [mem 0xd8000000-0xdbffffff]
pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xdf100000-0xdf2fffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xdd000000-0xdeffffff]
pci_bus 0000:04: resource 0 [io 0xd000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xdd000000-0xdeffffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 1 [mem 0xde000000-0xdeffffff]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xdd000000-0xddffffff]
pci_bus 0000:07: resource 1 [mem 0xdc000000-0xdcffffff]
pci_bus 0000:07: resource 2 [mem 0xd7800000-0xd7ffffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:07: resource 7 [mem 0x80000000-0xfdffffff window]
pci_bus 0000:07: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:fe: resource 4 [io 0x0000-0xffff]
pci_bus 0000:fe: resource 5 [mem 0x00000000-0xffffffffff]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:07:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 39956K (ffff8e2ff31e6000 - ffff8e2ff58eb000)
DMAR: Host address width 40
DMAR: DRHD base: 0x000000fed90000 flags: 0x1
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c90780106f0462 ecap f020f6
DMAR: RMRR base: 0x0000007f4c8000 end: 0x0000007f4dffff
DMAR: RMRR base: 0x0000007f4b1000 end: 0x0000007f4bffff
DMAR: RMRR base: 0x0000007f4a1000 end: 0x0000007f4a1fff
DMAR: RMRR base: 0x0000007f4a3000 end: 0x0000007f4a3fff
DMAR: RMRR base: 0x0000007f4a5000 end: 0x0000007f4a5fff
DMAR: RMRR base: 0x0000007f4a7000 end: 0x0000007f4a7fff
DMAR: RMRR base: 0x0000007f4a9000 end: 0x0000007f4a9fff
DMAR: RMRR base: 0x0000007f4c0000 end: 0x0000007f4c0fff
DMAR: RMRR base: 0x0000007f4c2000 end: 0x0000007f4c2fff
DMAR: ATSR flags: 0x0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7b369000-0x7f369000] (64MB) mapped at [ffff8e303b369000-ffff8e303f368fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1479935595.176:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=24 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.25)
Key type big_key registered
Allocating IMA blacklist keyring.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie001: service driver pcie_pme loaded
pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
pcieport 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:04:02.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:04:04.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:07.0:pcie001: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd7800000, mapped to 0xffff9f3e06c00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: using zlib compression
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf0dd000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.8.0-22-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 21, io mem 0xdf0de000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.8.0-22-generic ehci_hcd
usb 1-3: new high-speed USB device number 3 using ehci-pci
usb usb2: SerialNumber: 0000:00:1d.7
tsc: Refined TSC clocksource calibration: 2393.999 MHz
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000cc20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.8.0-22-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000cc40
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.8.0-22-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000cc60
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.8.0-22-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000cc80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 4.8.0-22-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000cca0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 4.8.0-22-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 20, io base 0x0000ccc0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 4.8.0-22-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
usb 1-3: New USB device found, idVendor=0424, idProduct=2514
usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
random: fast init done
usb 3-1: new low-speed USB device number 2 using uhci_hcd
usb 3-1: New USB device found, idVendor=10d5, idProduct=5a08
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: KVM
usb 3-1: Manufacturer: No brand
usb 5-2: new full-speed USB device number 2 using uhci_hcd
usb 5-2: New USB device found, idVendor=0624, idProduct=0248
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-2: Product: USB Composite Device-0
usb 5-2: Manufacturer: Avocent
usb 5-2: SerialNumber: 20080519
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x106a5, pf=0x1, revision=0x11
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 68ad1f6e70f7e9aa887b0e6d3f124ca85d29e62a'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 8:157:248
rtc_cmos 00:01: setting system clock to 2016-11-23 21:13:22 UTC (1479935602)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1548K (ffffffffa8166000 - ffffffffa82e9000)
Write protecting the kernel read-only data: 14336k
clocksource: Switched to clocksource tsc
Freeing unused kernel memory: 1376K (ffff8e36ecca8000 - ffff8e36ece00000)
Freeing unused kernel memory: 292K (ffff8e36ed1b7000 - ffff8e36ed200000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
hidraw: raw HID events driver (C) Jiri Kosina
bnx2: QLogic bnx2 Gigabit Ethernet Driver v2.2.6 (January 29, 2014)
bnx2 0000:01:00.0 eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 30, node addr 00:26:b9:50:c2:c1
bnx2 0000:01:00.1 eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 31, node addr 00:26:b9:50:c2:c2
bnx2 0000:01:00.1 eno2: renamed from eth1
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Fusion MPT base driver 3.04.20
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ccc ems sxs
bnx2 0000:01:00.0 eno1: renamed from eth0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf0df000 port 0xdf0df100 irq 32
ata2: SATA max UDMA/133 abar m2048@0xdf0df000 port 0xdf0df180 irq 32
ata3: SATA max UDMA/133 abar m2048@0xdf0df000 port 0xdf0df200 irq 32
ata4: SATA max UDMA/133 abar m2048@0xdf0df000 port 0xdf0df280 irq 32
ata5: SATA max UDMA/133 abar m2048@0xdf0df000 port 0xdf0df300 irq 32
ata6: SATA max UDMA/133 abar m2048@0xdf0df000 port 0xdf0df380 irq 32
ata2: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: TEAC DVD-ROM DV28SV, D.0L, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM TEAC DVD-ROM DV28SV D.0L PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg0 type 5
PTP clock support registered
input: No brand KVM as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:10D5:5A08.0001/input/input4
hid-generic 0003:10D5:5A08.0001: input,hidraw0: USB HID v1.10 Keyboard [No brand KVM] on usb-0000:00:1a.0-1/input0
input: No brand KVM as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:10D5:5A08.0002/input/input5
hid-generic 0003:10D5:5A08.0002: input,hidraw1: USB HID v1.10 Mouse [No brand KVM] on usb-0000:00:1a.0-1/input1
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:0624:0248.0003/input/input6
hid-generic 0003:0624:0248.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/0003:0624:0248.0004/input/input7
hid-generic 0003:0624:0248.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
dca service started, version 1.12.1
Copyright (c) 1999-2008 LSI Corporation
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:0e:7f:e8
igb 0000:05:00.0: eth0: PBA No: Unknown
igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:05:00.1: added PHC on eth1
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:0e:7f:e9
igb 0000:05:00.1: eth1: PBA No: Unknown
igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
ioc0: LSISAS1068E B3: Capabilities={Initiator}
igb 0000:06:00.0: added PHC on eth2
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:0e:7f:ec
igb 0000:06:00.0: eth2: PBA No: Unknown
igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:06:00.1: added PHC on eth3
igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 90:e2:ba:0e:7f:ed
igb 0000:06:00.1: eth3: PBA No: Unknown
igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:05:00.0 enp5s0f0: renamed from eth0
igb 0000:05:00.1 enp5s0f1: renamed from eth1
igb 0000:06:00.0 enp6s0f0: renamed from eth2
igb 0000:06:00.1 enp6s0f1: renamed from eth3
scsi host6: ioc0: LSISAS1068E B3, FwRev=00192f00h, Ports=1, MaxQ=266, IRQ=43
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 9, phy 0, sas_addr 0x5000c500177b9b59
scsi 6:0:0:0: Direct-Access SEAGATE ST9146803SS FS04 PQ: 0 ANSI: 5
scsi 6:0:0:0: Attached scsi generic sg1 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x5000c50017791a39
scsi 6:0:1:0: Direct-Access SEAGATE ST9146803SS FS04 PQ: 0 ANSI: 5
scsi 6:0:1:0: Attached scsi generic sg2 type 0
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x5000c500177b9b8d
scsi 6:0:2:0: Direct-Access SEAGATE ST9146803SS FS04 PQ: 0 ANSI: 5
scsi 6:0:2:0: Attached scsi generic sg3 type 0
mptsas: ioc0: attaching raid volume, channel 1, id 0
scsi 6:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
sd 6:1:0:0: Attached scsi generic sg4 type 0
sd 6:1:0:0: [sda] 285474816 512-byte logical blocks: (146 GB/136 GiB)
sd 6:1:0:0: [sda] Write Protect is off
sd 6:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 6:1:0:0: [sda] No Caching mode page found
sd 6:1:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 < sda5 >
sd 6:1:0:0: [sda] Attached SCSI disk
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 3862 MB/s
raid6: sse2x1 xor() 3012 MB/s
raid6: sse2x2 gen() 4569 MB/s
raid6: sse2x2 xor() 3527 MB/s
raid6: sse2x4 gen() 5171 MB/s
raid6: sse2x4 xor() 3855 MB/s
raid6: using algorithm sse2x4 gen() 5171 MB/s
raid6: .... xor() 3855 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 6444.000 MB/sec
generic_sse: 5677.000 MB/sec
xor: using function: prefetch64-sse (6444.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
random: crng init done
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
ERST: NVRAM ERST Log Address Range not implemented yet.
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on udev Kernel Socket.
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[571]: Received request to flush runtime journal from PID 1
ACPI Error: No handler for Region [IPMI] (ffff8e401ec9e318) [IPMI] (20160422/evregion-166)
ACPI Error: Region IPMI (ID=7) has no handler (20160422/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB.PMI0._GHL] (Node ffff8e401ec9d028), AE_NOT_EXIST (20160422/psparse-542)
ACPI Error: Method parse/execution failed [\_SB.PMI0._PMC] (Node ffff8e401ec9d6b8), AE_NOT_EXIST (20160422/psparse-542)
ACPI Exception: AE_NOT_EXIST, Evaluating _PMC (20160422/power_meter-755)
ipmi message handler version 39.2
EDAC MC: Ver: 3.0.0
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca8 regsize 1 spacing 4 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
EDAC MC1: Giving out device to module i7core_edac.c controller i7 core #1: DEV 0000:fe:03.0 (INTERRUPT)
EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:fe:03.0 (POLLED)
EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (INTERRUPT)
EDAC PCI1: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
EDAC i7core: Driver loaded, 2 memory controller(s) found.
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
IPMI SSIF Interface driver
gpio_ich: GPIO from 451 to 511 on gpio_ich
ipmi device interface
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
Adding 67092476k swap on /dev/mapper/tcc--container02--vg-swap_1. Priority:-1 extents:1 across:67092476k FS
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
audit: type=1400 audit(1479935655.946:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2908 comm="apparmor_parser"
audit: type=1400 audit(1479935655.946:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=2911 comm="apparmor_parser"
audit: type=1400 audit(1479935655.950:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=2912 comm="apparmor_parser"
audit: type=1400 audit(1479935655.950:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2912 comm="apparmor_parser"
audit: type=1400 audit(1479935655.954:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=2910 comm="apparmor_parser"
audit: type=1400 audit(1479935655.954:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2910 comm="apparmor_parser"
audit: type=1400 audit(1479935655.954:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2910 comm="apparmor_parser"
audit: type=1400 audit(1479935655.954:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2910 comm="apparmor_parser"
audit: type=1400 audit(1479935655.958:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=2914 comm="apparmor_parser"
audit: type=1400 audit(1479935655.970:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=2909 comm="apparmor_parser"
bnx2 0000:01:00.0 eno1: using MSIX
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
cgroup: new mount options do not match the existing superblock, will be ignored
bnx2 0000:01:00.0 eno1: NIC Copper Link is Up, 1000 Mbps full duplex
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
audit_printk_skb: 9 callbacks suppressed
audit: type=1400 audit(1479935668.014:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="docker-default" pid=3573 comm="apparmor_parser"
aufs 4.x-rcN-20160912
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
aufs au_opts_verify:1597:dockerd[3543]: dirperm1 breaks the protection by the permission bits on the lower branch
docker0: port 1(vethb5e3777) entered blocking state
docker0: port 1(vethb5e3777) entered disabled state
device vethb5e3777 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethb5e3777: link is not ready
docker0: port 1(vethb5e3777) entered blocking state
docker0: port 1(vethb5e3777) entered forwarding state
docker0: port 1(vethb5e3777) entered disabled state
docker0: port 2(vethb1cb89c) entered blocking state
docker0: port 2(vethb1cb89c) entered disabled state
device vethb1cb89c entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethb1cb89c: link is not ready
docker0: port 2(vethb1cb89c) entered blocking state
docker0: port 2(vethb1cb89c) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
docker0: port 2(vethb1cb89c) entered disabled state
docker0: port 3(veth695cec4) entered blocking state
docker0: port 3(veth695cec4) entered disabled state
device veth695cec4 entered promiscuous mode
docker0: port 4(veth621001d) entered blocking state
docker0: port 4(veth621001d) entered disabled state
device veth621001d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth621001d: link is not ready
docker0: port 4(veth621001d) entered blocking state
docker0: port 4(veth621001d) entered forwarding state
IPv6: ADDRCONF(NETDEV_UP): veth695cec4: link is not ready
docker0: port 3(veth695cec4) entered blocking state
docker0: port 3(veth695cec4) entered forwarding state
docker0: port 4(veth621001d) entered disabled state
docker0: port 3(veth695cec4) entered disabled state
eth0: renamed from veth7ba7e86
IPv6: ADDRCONF(NETDEV_CHANGE): vethb1cb89c: link becomes ready
docker0: port 2(vethb1cb89c) entered blocking state
docker0: port 2(vethb1cb89c) entered forwarding state
eth0: renamed from veth88207ba
IPv6: ADDRCONF(NETDEV_CHANGE): veth621001d: link becomes ready
docker0: port 4(veth621001d) entered blocking state
docker0: port 4(veth621001d) entered forwarding state
eth0: renamed from vethb1c9d3a
eth0: renamed from veth1586929
IPv6: ADDRCONF(NETDEV_CHANGE): veth695cec4: link becomes ready
docker0: port 3(veth695cec4) entered blocking state
docker0: port 3(veth695cec4) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): vethb5e3777: link becomes ready
docker0: port 1(vethb5e3777) entered blocking state
docker0: port 1(vethb5e3777) entered forwarding state
docker0: port 5(veth505d05a) entered blocking state
docker0: port 5(veth505d05a) entered disabled state
device veth505d05a entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth505d05a: link is not ready
docker0: port 5(veth505d05a) entered blocking state
docker0: port 5(veth505d05a) entered forwarding state
docker0: port 6(veth855b20d) entered blocking state
docker0: port 6(veth855b20d) entered disabled state
device veth855b20d entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth855b20d: link is not ready
docker0: port 6(veth855b20d) entered blocking state
docker0: port 6(veth855b20d) entered forwarding state
docker0: port 5(veth505d05a) entered disabled state
docker0: port 6(veth855b20d) entered disabled state
eth0: renamed from veth0f27c6b
IPv6: ADDRCONF(NETDEV_CHANGE): veth505d05a: link becomes ready
docker0: port 5(veth505d05a) entered blocking state
docker0: port 5(veth505d05a) entered forwarding state
eth0: renamed from veth139193d
IPv6: ADDRCONF(NETDEV_CHANGE): veth855b20d: link becomes ready
docker0: port 6(veth855b20d) entered blocking state
docker0: port 6(veth855b20d) entered forwarding state
docker0: port 7(veth2a0fa0a) entered blocking state
docker0: port 7(veth2a0fa0a) entered disabled state
device veth2a0fa0a entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): veth2a0fa0a: link is not ready
docker0: port 7(veth2a0fa0a) entered blocking state
docker0: port 7(veth2a0fa0a) entered forwarding state
docker0: port 7(veth2a0fa0a) entered disabled state
eth0: renamed from vethe13b56f
IPv6: ADDRCONF(NETDEV_CHANGE): veth2a0fa0a: link becomes ready
docker0: port 7(veth2a0fa0a) entered blocking state
docker0: port 7(veth2a0fa0a) entered forwarding state
docker0: port 7(veth2a0fa0a) entered disabled state
vethe13b56f: renamed from eth0
eth0: renamed from vethe13b56f
docker0: port 7(veth2a0fa0a) entered blocking state
docker0: port 7(veth2a0fa0a) entered forwarding state
docker0: port 7(veth2a0fa0a) entered disabled state
vethe13b56f: renamed from eth0
eth0: renamed from vethe13b56f
docker0: port 7(veth2a0fa0a) entered blocking state
docker0: port 7(veth2a0fa0a) entered forwarding state
docker0: port 7(veth2a0fa0a) entered disabled state
vethe13b56f: renamed from eth0
eth0: renamed from vethe13b56f
docker0: port 7(veth2a0fa0a) entered blocking state
docker0: port 7(veth2a0fa0a) entered forwarding state
perf: interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
perf: interrupt took too long (3259 > 3172), lowering kernel.perf_event_max_sample_rate to 61250
perf: interrupt took too long (4102 > 4073), lowering kernel.perf_event_max_sample_rate to 48750
perf: interrupt took too long (5158 > 5127), lowering kernel.perf_event_max_sample_rate to 38750
perf: interrupt took too long (6520 > 6447), lowering kernel.perf_event_max_sample_rate to 30500
perf: interrupt took too long (8192 > 8150), lowering kernel.perf_event_max_sample_rate to 24250
perf: interrupt took too long (10256 > 10240), lowering kernel.perf_event_max_sample_rate to 19500
perf: interrupt took too long (12834 > 12820), lowering kernel.perf_event_max_sample_rate to 15500