dmesg - -
microcode: microcode updated early to revision 0x1c, date = 2015-02-26
Linux version 4.7.10-1-MANJARO (builduser@manjaro) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Sat Oct 22 19:15:11 UTC 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cd7ebfff] usable
BIOS-e820: [mem 0x00000000cd7ec000-0x00000000cdb51fff] reserved
BIOS-e820: [mem 0x00000000cdb52000-0x00000000cdbddfff] usable
BIOS-e820: [mem 0x00000000cdbde000-0x00000000cdc7bfff] ACPI NVS
BIOS-e820: [mem 0x00000000cdc7c000-0x00000000cedc8fff] reserved
BIOS-e820: [mem 0x00000000cedc9000-0x00000000cedc9fff] usable
BIOS-e820: [mem 0x00000000cedca000-0x00000000cee0cfff] ACPI NVS
BIOS-e820: [mem 0x00000000cee0d000-0x00000000cf232fff] usable
BIOS-e820: [mem 0x00000000cf233000-0x00000000cf7f3fff] reserved
BIOS-e820: [mem 0x00000000cf7f4000-0x00000000cf7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7751/Z77 MPower (MS-7751), BIOS V17.10B1 06/25/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FE0000000 write-back
2 base 420000000 mask FF8000000 write-back
3 base 428000000 mask FFC000000 write-back
4 base 42C000000 mask FFE000000 write-back
5 base 42E000000 mask FFF000000 write-back
6 base 0E0000000 mask FE0000000 uncachable
7 base 0D0000000 mask FF0000000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
BRK [0x01b39000, 0x01b39fff] PGTABLE
BRK [0x01b3a000, 0x01b3afff] PGTABLE
BRK [0x01b3b000, 0x01b3bfff] PGTABLE
BRK [0x01b3c000, 0x01b3cfff] PGTABLE
BRK [0x01b3d000, 0x01b3dfff] PGTABLE
BRK [0x01b3e000, 0x01b3efff] PGTABLE
RAMDISK: [mem 0x35d4b000-0x36e9cfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000CDC6C078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000CDC761F8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000CDC6C178 00A07D (v02 ALASKA A M I 00000024 INTL 20051117)
ACPI: FACS 0x00000000CDC7A080 000040
ACPI: APIC 0x00000000CDC76308 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000CDC76380 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000CDC763C8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000CDC76408 00081B (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: HPET 0x00000000CDC76C28 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000CDC76C60 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000CDC76FD0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000CDC77980 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
NODE_DATA(0) allocated [mem 0x42efe9000-0x42efecfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000042effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000cd7ebfff]
node 0: [mem 0x00000000cdb52000-0x00000000cdbddfff]
node 0: [mem 0x00000000cedc9000-0x00000000cedc9fff]
node 0: [mem 0x00000000cee0d000-0x00000000cf232fff]
node 0: [mem 0x00000000cf7f4000-0x00000000cf7fffff]
node 0: [mem 0x0000000100000000-0x000000042effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000042effffff]
On node 0 totalpages: 4181063
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13107 pages used for memmap
DMA32 zone: 838827 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcd7ec000-0xcdb51fff]
PM: Registered nosave memory: [mem 0xcdbde000-0xcdc7bfff]
PM: Registered nosave memory: [mem 0xcdc7c000-0xcedc8fff]
PM: Registered nosave memory: [mem 0xcedca000-0xcee0cfff]
PM: Registered nosave memory: [mem 0xcf233000-0xcf7f3fff]
PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 33 pages/cpu @ffff88042ec00000 s97944 r8192 d29032 u524288
pcpu-alloc: s97944 r8192 d29032 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4115711
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16365848K/16724252K available (6036K kernel code, 981K rwdata, 1892K rodata, 1244K init, 1036K bss, 358404K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:8448 nr_irqs:456 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3417.707 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6838.22 BogoMIPS (lpj=11392356)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81a2e000 - ffffffff81a34000)
ftrace: allocating 23965 entries in 94 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (27355.27 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xcdbde000-0xcdc7bfff] (647168 bytes)
PM: Registering ACPI NVS region [mem 0xcedca000-0xcee0cfff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 15:20:52, date: 10/24/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041E027000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041C1E9800 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88041C1B8E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf6300000-0xf630ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf6315000-0xf631500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6313000-0xf63133ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1e1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6312000-0xf63123ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6311000-0xf63117ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf6310000-0xf63100ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:02:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
pci 0000:02:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:02:00.1: reg 0x10: [mem 0xf6080000-0xf6083fff]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf6204000-0xf6204fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xf6200000-0xf6203fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:05:00.0: [1102:000b] type 00 class 0x040300
pci 0000:05:00.0: reg 0x10: [mem 0xf4200000-0xf420ffff 64bit]
pci 0000:05:00.0: reg 0x18: [mem 0xf4000000-0xf41fffff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf3ffffff 64bit]
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf42fffff]
pci 0000:06:00.0: [1912:0014] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xf6100000-0xf6101fff 64bit]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xf6100000-0xf61fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:02:00.0
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcd7ec000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcdbde000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcedca000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf233000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0xe000-0xefff]
pci 0000:00:01.1: bridge window [mem 0xf5000000-0xf60fffff]
pci 0000:00:01.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xf6200000-0xf62fffff]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf42fffff]
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xf6100000-0xf61fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf5000000-0xf60fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xf6200000-0xf62fffff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf42fffff]
pci_bus 0000:06: resource 1 [mem 0xf6100000-0xf61fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 17736K (ffff880035d4b000 - ffff880036e9d000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc97ec000-0xcd7ec000] (64MB) mapped at [ffff8800c97ec000-ffff8800cd7ebfff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
Initialise system trusted keyrings
workingset: timestamp_bits=38 max_order=22 bucket_order=0
zbud: loaded
Key type big_key registered
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered
io scheduler bfq registered (default)
BFQ I/O-scheduler: v7r8
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe1000000, mapped to 0xffffc90001c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1c
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1c
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1c
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 4:690:336
tty tty57: hash matches
rtc_cmos 00:02: setting system clock to 2016-10-24 15:20:53 UTC (1477322453)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1244K (ffffffff818f7000 - ffffffff81a2e000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 92K (ffff8800015e9000 - ffff880001600000)
Freeing unused kernel memory: 156K (ffff8800017d9000 - ffff880001800000)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
device-mapper: uevent: version 1.0.3
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf6313000
SCSI subsystem initialized
libata version 3.00 loaded.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf6312000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
xhci_hcd 0000:06:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6311000 port 0xf6311100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xf6311000 port 0xf6311180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xf6311000 port 0xf6311200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xf6311000 port 0xf6311280 irq 27
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 5-1: new high-speed USB device number 2 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88041e0c6758), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88041e0c67d0), AE_NOT_FOUND (20160422/psparse-542)
ata2.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88041e0c6758), AE_NOT_FOUND (20160422/psparse-542)
ata2.00: configured for UDMA/133
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88041e0c66e0), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88041e0c67d0), AE_NOT_FOUND (20160422/psparse-542)
ata1.00: supports DRM functions and may not be fully accessible
ata3.00: configured for UDMA/133
ata1.00: NCQ Send/Recv Log not supported
ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT01B6Q, max UDMA/133
ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88041e0c66e0), AE_NOT_FOUND (20160422/psparse-542)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88041e0c6848), AE_NOT_FOUND (20160422/psparse-542)
ata4.00: ATAPI: HL-DT-ST DVDRAM GH24NS90, IN01, max UDMA/100
ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff88041e0c6848), AE_NOT_FOUND (20160422/psparse-542)
ata4.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb-storage 5-1:1.3: USB Mass Storage device detected
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS90 IN01 PQ: 0 ANSI: 5
scsi host7: usb-storage 5-1:1.3
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
usb 3-3: new full-speed USB device number 2 using xhci_hcd
usb 5-3: new full-speed USB device number 3 using xhci_hcd
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-3/5-3:1.0/0003:046D:C24D.0001/input/input2
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C537.0003/input/input3
usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd
hid-generic 0003:046D:C24D.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:06:00.0-3/input0
hid-generic 0003:046D:C537.0003: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
input: Logitech Logitech G710 Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb5/5-3/5-3:1.1/0003:046D:C24D.0002/input/input4
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C537.0004/input/input5
scsi host8: uas
scsi 8:0:0:0: Direct-Access Seagate BUP Slim RD 0143 PQ: 0 ANSI: 6
tsc: Refined TSC clocksource calibration: 3417.825 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31441501c83, max_idle_ns: 440795294842 ns
hid-generic 0003:046D:C24D.0002: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech G710 Keyboard] on usb-0000:06:00.0-3/input1
sd 8:0:0:0: [sdd] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 2b 00 10 08
sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
hid-generic 0003:046D:C537.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
input: Creative Technology Ltd Sound Blaster Tactic(3D) Sigma as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.3/0003:041E:3220.0005/input/input6
sdd: sdd1
usb 1-1.5: new full-speed USB device number 4 using ehci-pci
sd 8:0:0:0: [sdd] Attached SCSI disk
hid-generic 0003:041E:3220.0005: input,hiddev0,hidraw4: USB HID v1.00 Device [Creative Technology Ltd Sound Blaster Tactic(3D) Sigma] on usb-0000:00:14.0-3/input3
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3
sd 6:0:0:0: [sde] Attached SCSI removable disk
scsi 7:0:0:0: Direct-Access Brother MFC-J870DW 1.00 PQ: 0 ANSI: 2
sd 7:0:0:0: [sdf] Attached SCSI removable disk
random: nonblocking pool is initialized
clocksource: Switched to clocksource tsc
NET: Registered protocol family 38
PM: Starting manual resume from disk
PM: Hibernation image partition 254:2 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Reached target Login Prompts.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Reached target Swap.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
vboxdrv: Found 4 processor cores
systemd[1]: Starting Set Up Additional Binary Formats...
systemd[1]: Starting Remount Root and Kernel File Systems...
vboxdrv: TSC mode is Invariant, tentative frequency 3417802506 Hz
vboxdrv: Successfully loaded version 5.1.8 (interface 0x00280000)
VBoxNetAdp: Successfully started.
VBoxNetFlt: Successfully started.
VBoxPciLinuxInit
EXT4-fs (dm-1): re-mounted. Opts: (null)
systemd[1]: Mounting POSIX Message Queue File System...
vboxpci: IOMMU not found (not registered)
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
systemd[1]: Mounted Debug File System.
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 247
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 370.28 Thu Sep 1 19:45:04 PDT 2016
systemd[1]: Started Journal Service.
systemd-journald[338]: Received request to flush runtime journal from PID 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
ACPI: Power Button [PWRF]
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
r8168 Gigabit Ethernet driver 8.040.00-NAPI loaded
r8168 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
snd_ctxfi 0000:05:00.0: chip 20K2 model SB0880 (1102:0043) is found
[drm] Initialized drm 1.1.0 20060810
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2015 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
snd_hda_intel 0000:02:00.1: Disabling MSI
snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 370.28 Thu Sep 1 19:18:48 PDT 2016
[drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: RAPL package 0 domain package locked by BIOS
r8168 0000:04:00.0 enp4s0: renamed from eth0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
snd_ctxfi 0000:05:00.0: Use xfi-native timer
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input10
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input11
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input12
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input13
f71882fg: Found f71889a chip at 0x290, revision 49
f71882fg f71882fg.656: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 1
f71882fg f71882fg.656: Fan: 2 is in duty-cycle mode
f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 2
f71882fg f71882fg.656: Fan: 3 is in duty-cycle mode
f71882fg f71882fg.656: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 3
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
SUPR0GipMap: fGetGipCpu=0xb
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
enp4s0: 0xffffc900018b0000, d4:3d:7e:32:1b:35, IRQ 33
IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
vboxdrv: ffffffffa1337020 VMMR0.r0
usblp 5-1:1.0: usblp3: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x02EC
usbcore: registered new interface driver usblp
usbcore: registered new interface driver snd-usb-audio
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
nvidia-modeset: Allocated GPU:0 (GPU-67f4ee6c-b606-2972-c7df-33befea9a140) @ PCI:0000:02:00.0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 3
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: NCQ Send/Recv Log not supported
ata1.00: configured for UDMA/133
ata1: EH complete
ata2.00: configured for UDMA/133
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
sdc: sdc1 sdc2
r8168: enp4s0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
IPTables-Dropped: IN=enp4s0 OUT= MAC= SRC=192.168.178.27 DST=224.0.0.251 LEN=244 TOS=0x00 PREC=0x00 TTL=255 ID=35909 DF PROTO=UDP SPT=5353 DPT=5353 LEN=224
IPTables-Dropped: IN=enp4s0 OUT= MAC= SRC=192.168.178.27 DST=224.0.0.251 LEN=166 TOS=0x00 PREC=0x00 TTL=255 ID=35915 DF PROTO=UDP SPT=5353 DPT=5353 LEN=146
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=16105 PROTO=UDP SPT=54915 DPT=54915 LEN=271
IPTables-Dropped: IN=enp4s0 OUT= MAC= SRC=192.168.178.27 DST=224.0.0.251 LEN=244 TOS=0x00 PREC=0x00 TTL=255 ID=35942 DF PROTO=UDP SPT=5353 DPT=5353 LEN=224
IPTables-Dropped: IN=enp4s0 OUT= MAC= SRC=192.168.178.27 DST=224.0.0.251 LEN=244 TOS=0x00 PREC=0x00 TTL=255 ID=36016 DF PROTO=UDP SPT=5353 DPT=5353 LEN=224
usblp3: removed
usblp 5-1:1.0: usblp3: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x02EC
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc1): warning: mounting unchecked fs, running e2fsck is recommended
EXT4-fs (sdc1): mounted filesystem without journal. Opts: (null)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fuse init (API version 7.25)
loop: module loaded
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null)
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 2
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 64
nspr-2: sending ioctl 5393 to a partition!
nspr-2: sending ioctl 5393 to a partition!
nspr-2: sending ioctl 5393 to a partition!
vboxdrv: ffffffffa14c1020 VMMR0.r0
vboxdrv: ffffffffa15c3020 VBoxDDR0.r0
VBoxNetFlt: attached to 'enp4s0' / d4:3d:7e:32:1b:35
vboxdrv: ffffffffa0005020 VBoxEhciR0.r0
device enp4s0 entered promiscuous mode
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
device enp4s0 left promiscuous mode
vboxnetflt: 0 out of 83115 packets were not sent (directed to host)
nspr-5: sending ioctl 5393 to a partition!
nspr-5: sending ioctl 5393 to a partition!
nspr-5: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-4: sending ioctl 5393 to a partition!
nspr-6: sending ioctl 5393 to a partition!
nspr-6: sending ioctl 5393 to a partition!
nspr-6: sending ioctl 5393 to a partition!
vboxdrv: ffffffffa14c1020 VMMR0.r0
vboxdrv: ffffffffa15c3020 VBoxDDR0.r0
VBoxNetFlt: attached to 'enp4s0' / d4:3d:7e:32:1b:35
vboxdrv: ffffffffa0005020 VBoxEhciR0.r0
device enp4s0 entered promiscuous mode
device enp4s0 left promiscuous mode
vboxnetflt: 0 out of 3760 packets were not sent (directed to host)
nspr-7: sending ioctl 5393 to a partition!
nspr-7: sending ioctl 5393 to a partition!
nspr-7: sending ioctl 5393 to a partition!
nspr-7: sending ioctl 5393 to a partition!
nspr-7: sending ioctl 5393 to a partition!
nspr-7: sending ioctl 5393 to a partition!
vboxdrv: ffffffffa14c1020 VMMR0.r0
vboxdrv: ffffffffa15c3020 VBoxDDR0.r0
VBoxNetFlt: attached to 'enp4s0' / d4:3d:7e:32:1b:35
vboxdrv: ffffffffa0005020 VBoxEhciR0.r0
device enp4s0 entered promiscuous mode
device enp4s0 left promiscuous mode
device enp4s0 entered promiscuous mode
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=17636 PROTO=UDP SPT=54915 DPT=54915 LEN=271
usblp3: removed
usblp 5-1:1.0: usblp3: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x02EC
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=19160 PROTO=UDP SPT=54915 DPT=54915 LEN=271
usb 4-2: Disable of device-initiated U1 failed.
usb 4-2: Disable of device-initiated U2 failed.
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
usb 4-2: device not accepting address 2, error -62
usb 4-2: USB disconnect, device number 2
usb 2-1.6: new high-speed USB device number 3 using ehci-pci
usb-storage 2-1.6:1.0: USB Mass Storage device detected
scsi host6: usb-storage 2-1.6:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 122544516 512-byte logical blocks: (62.7 GB/58.4 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 2-1.6: USB disconnect, device number 3
QSGRenderThread[3997]: segfault at 0 ip 00007fa6f65925bd sp 00007fa642f7ad28 error 4 in libc-2.24.so[7fa6f64fa000+195000]
usb 4-2: new SuperSpeed USB device number 4 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 122544516 512-byte logical blocks: (62.7 GB/58.4 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=20666 PROTO=UDP SPT=54915 DPT=54915 LEN=271
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=22105 PROTO=UDP SPT=54915 DPT=54915 LEN=271
sde: sde1
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
usb 4-2: USB disconnect, device number 4
usb 4-2: new SuperSpeed USB device number 5 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 122544516 512-byte logical blocks: (62.7 GB/58.4 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
FAT-fs (sde1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
sde: sde1
usb 4-2: USB disconnect, device number 5
usb 4-2: new SuperSpeed USB device number 6 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 122544516 512-byte logical blocks: (62.7 GB/58.4 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1
sd 6:0:0:0: [sde] Attached SCSI removable disk
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 4-2: USB disconnect, device number 6
FAT-fs (sde1): unable to read boot sector to mark fs as dirty
usb 4-2: new SuperSpeed USB device number 7 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3
sd 6:0:0:0: [sde] Attached SCSI removable disk
EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=23542 PROTO=UDP SPT=54915 DPT=54915 LEN=271
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=25001 PROTO=UDP SPT=54915 DPT=54915 LEN=271
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=192.168.178.255 LEN=291 TOS=0x00 PREC=0x00 TTL=128 ID=26404 PROTO=UDP SPT=54915 DPT=54915 LEN=271
nspr-2: sending ioctl 5393 to a partition!
nspr-2: sending ioctl 5393 to a partition!
nspr-2: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-5: sending ioctl 5393 to a partition!
nspr-5: sending ioctl 5393 to a partition!
nspr-5: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
nspr-3: sending ioctl 5393 to a partition!
PS2K: Selected scan set 2
VBoxNetFlt: Failed to allocate packet buffer, dropping the packet.
IPTables-Dropped: IN=enp4s0 OUT= MAC=ff:ff:ff:ff:ff:ff:ac:e0:10:06:a5:51:08:00 SRC=192.168.178.13 DST=255.255.255.255 LEN=126 TOS=0x00 PREC=0x00 TTL=128 ID=7244 PROTO=UDP SPT=6114 DPT=6114 LEN=106
kactivitymanage[2814]: segfault at 7fd584a60cf0 ip 00007fd584a78cb1 sp 00007ffed1352288 error 4 in libQt5Sql.so.5.7.0[7fd584a62000+46000]
device enp4s0 left promiscuous mode
vboxnetflt: 0 out of 237008 packets were not sent (directed to host)
usb 4-2: USB disconnect, device number 7
blk_update_request: I/O error, dev sde, sector 0
sd 6:0:0:0: [sde] Synchronizing SCSI cache
sd 6:0:0:0: [sde] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Buffer I/O error on dev sde2, logical block 3178496, lost sync page write
JBD2: Error -5 detected when updating journal superblock for sde2-8.
Aborting journal on device sde2-8.
Buffer I/O error on dev sde2, logical block 3178496, lost sync page write
JBD2: Error -5 detected when updating journal superblock for sde2-8.
IPTables-Dropped: IN=enp4s0 OUT= MAC= SRC=192.168.178.27 DST=239.255.255.250 LEN=337 TOS=0x00 PREC=0x00 TTL=32 ID=16001 DF PROTO=UDP SPT=41612 DPT=1900 LEN=317
usb 4-2: new SuperSpeed USB device number 8 using xhci_hcd
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
scsi 6:0:0:0: Direct-Access SanDisk Extreme 0001 PQ: 0 ANSI: 6
sd 6:0:0:0: [sde] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 53 00 00 08
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2 sde3
sd 6:0:0:0: [sde] Attached SCSI removable disk
EXT4-fs (sde2): 6 orphan inodes deleted
EXT4-fs (sde2): recovery complete
EXT4-fs (sde2): mounted filesystem with ordered data mode. Opts: (null)
IPTables-Dropped: IN=enp4s0 OUT= MAC= SRC=192.168.178.27 DST=239.255.255.250 LEN=337 TOS=0x00 PREC=0x00 TTL=32 ID=60889 DF PROTO=UDP SPT=38380 DPT=1900 LEN=317