dmesg - nuc_flac
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-45-generic (buildd@lgw01-34) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #66-Ubuntu SMP Wed Oct 19 14:12:37 UTC 2016 (Ubuntu 4.4.0-45.66-generic 4.4.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000860e3fff] usable
BIOS-e820: [mem 0x00000000860e4000-0x00000000860e4fff] ACPI NVS
BIOS-e820: [mem 0x00000000860e5000-0x000000008610efff] reserved
BIOS-e820: [mem 0x000000008610f000-0x000000008a246fff] usable
BIOS-e820: [mem 0x000000008a247000-0x000000008a548fff] reserved
BIOS-e820: [mem 0x000000008a549000-0x000000008a580fff] ACPI data
BIOS-e820: [mem 0x000000008a581000-0x000000008ae72fff] ACPI NVS
BIOS-e820: [mem 0x000000008ae73000-0x000000008b2fefff] reserved
BIOS-e820: [mem 0x000000008b2ff000-0x000000008b2fffff] usable
BIOS-e820: [mem 0x000000008b300000-0x000000008b3fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
SMBIOS 3.0 present.
DMI: /NUC6i5SYB, BIOS SYSKLi35.86A.0051.2016.0804.1114 08/04/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 base 008B800000 mask 7FFF800000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x8b300 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcba0-0x000fcbaf] mapped at [ffff8800000fcba0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000096000] 96000 size 24576
Using GB pages for direct mapping
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
BRK [0x02204000, 0x02204fff] PGTABLE
BRK [0x02205000, 0x02205fff] PGTABLE
BRK [0x02206000, 0x02206fff] PGTABLE
RAMDISK: [mem 0x335e0000-0x35ae7fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05B0 000024 (v02 INTEL )
ACPI: XSDT 0x000000008A554098 0000B4 (v01 INTEL NUC6i5SY 00000033 AMI 00010013)
ACPI: FACP 0x000000008A575EF8 00010C (v05 INTEL NUC6i5SY 00000033 AMI 00010013)
ACPI: DSDT 0x000000008A5541E0 021D12 (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: FACS 0x000000008AE72F80 000040
ACPI: APIC 0x000000008A576008 000084 (v03 INTEL NUC6i5SY 00000033 AMI 00010013)
ACPI: FPDT 0x000000008A576090 000044 (v01 INTEL NUC6i5SY 00000033 AMI 00010013)
ACPI: FIDT 0x000000008A5760D8 00009C (v01 INTEL NUC6i5SY 00000033 AMI 00010013)
ACPI: MCFG 0x000000008A576178 00003C (v01 INTEL NUC6i5SY 00000033 MSFT 00000097)
ACPI: HPET 0x000000008A5761B8 000038 (v01 INTEL NUC6i5SY 00000033 AMI. 0005000B)
ACPI: LPIT 0x000000008A5761F0 000094 (v01 INTEL NUC6i5SY 00000033 MSFT 0000005F)
ACPI: SSDT 0x000000008A576288 000248 (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: SSDT 0x000000008A5764D0 002BAE (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: SSDT 0x000000008A579080 000BE3 (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: SSDT 0x000000008A579C68 0004A3 (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: DBGP 0x000000008A57A110 000034 (v01 INTEL NUC6i5SY 00000033 MSFT 0000005F)
ACPI: DBG2 0x000000008A57A148 000054 (v00 INTEL NUC6i5SY 00000033 MSFT 0000005F)
ACPI: SSDT 0x000000008A57A1A0 00046E (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: SSDT 0x000000008A57A610 00546C (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: UEFI 0x000000008A57FA80 000042 (v01 INTEL NUC6i5SY 00000033 00000000)
ACPI: SSDT 0x000000008A57FAC8 000E73 (v02 INTEL NUC6i5SY 00000033 INTL 20120913)
ACPI: DMAR 0x000000008A580940 0000CC (v01 INTEL NUC6i5SY 00000033 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46eff9000-0x46effdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000046effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000860e3fff]
node 0: [mem 0x000000008610f000-0x000000008a246fff]
node 0: [mem 0x000000008b2ff000-0x000000008b2fffff]
node 0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 4166072
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 8777 pages used for memmap
DMA32 zone: 561693 pages, LIFO batch:31
Normal zone: 56256 pages used for memmap
Normal zone: 3600384 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x8c000000-0x8fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x860e4000-0x860e4fff]
PM: Registered nosave memory: [mem 0x860e5000-0x8610efff]
PM: Registered nosave memory: [mem 0x8a247000-0x8a548fff]
PM: Registered nosave memory: [mem 0x8a549000-0x8a580fff]
PM: Registered nosave memory: [mem 0x8a581000-0x8ae72fff]
PM: Registered nosave memory: [mem 0x8ae73000-0x8b2fefff]
PM: Registered nosave memory: [mem 0x8b300000-0x8b3fffff]
PM: Registered nosave memory: [mem 0x8b400000-0x8bffffff]
PM: Registered nosave memory: [mem 0x8c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88046ec00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4100954
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16278820K/16664288K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 385468K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:1024 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 1800.165 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.33 BogoMIPS (lpj=7200660)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 8 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
ftrace: allocating 32007 entries in 126 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000008a2eb000 end: 0x0000008a30afff
DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-6260U CPU @ 1.80GHz (family: 0x6, model: 0x4e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14401.32 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x860e4000-0x860e4fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8a581000-0x8ae72fff] (9379840 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 20:43:41, date: 10/20/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 25 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045C265800 000558 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BCED000 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045C266000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BCE3400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [WRST] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
pci 0000:00:02.0: [8086:1926] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf150000-0xdf150fff 64bit]
pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf14f000-0xdf14ffff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf14e000-0xdf14e0ff]
pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf14d000-0xdf14d7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xdf14c000-0xdf14cfff 64bit]
pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501
pci 0000:00:1e.6: reg 0x10: [mem 0xdf14b000-0xdf14bfff 64bit]
pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
e820: reserve RAM buffer [mem 0x860e4000-0x87ffffff]
e820: reserve RAM buffer [mem 0x8a247000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8b300000-0x8bffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0a00-0x0a2f] has been reserved
system 00:00: [io 0x0a30-0x0a3f] has been reserved
system 00:00: [io 0x0a40-0x0a4f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs ITE8713 (active)
system 00:02: [io 0x0680-0x069f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x1800-0x18fe] could not be reserved
system 00:02: [io 0x164e-0x164f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x1854-0x1857] has been reserved
system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io 0xff00-0xfffe] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xdf000000-0xdf0fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 37920K (ffff8800335e0000 - ffff880035ae8000)
DMAR: ACPI device "device:67" under DMAR at fed91000 as 00:1e.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x86247000-0x8a247000] (64MB) mapped at [ffff880086247000-ffff88008a246fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1476996221.112:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x4E
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-45-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 12 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-45-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 2-2: New USB device found, idVendor=2109, idProduct=8110
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB3.0 Hub
usb 2-2: Manufacturer: VIA Labs, Inc.
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
i8042: No controller found
tsc: Refined TSC clocksource calibration: 1799.995 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f224e3c43, max_idle_ns: 440795212657 ns
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x406e3, pf=0x40, revision=0x8a
microcode: CPU1 sig=0x406e3, pf=0x40, revision=0x8a
microcode: CPU2 sig=0x406e3, pf=0x40, revision=0x8a
microcode: CPU3 sig=0x406e3, pf=0x40, revision=0x8a
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 5295ae568fdd4deae5e4e5c175542790e6aaeab9'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:335:751
misc uinput: hash matches
tty ttyS2: hash matches
rtc_cmos 00:03: setting system clock to 2016-10-20 20:43:43 UTC (1476996223)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1820K (ffff880001839000 - ffff880001a00000)
Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 9 bits of entropy available)
usb 1-1: new full-speed USB device number 2 using xhci_hcd
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf14d000 port 0xdf14d100 irq 275
sdhci-pci 0000:00:1e.6: SDHCI controller found [8086:9d2d] (rev 21)
sdhci-pci 0000:00:1e.6: failed to setup card detect gpio
[drm] Initialized drm 1.1.0 20060810
sdhci-pci 0000:00:1e.6: No vmmc regulator found
sdhci-pci 0000:00:1e.6: No vqmmc regulator found
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
mmc0: SDHCI controller on PCI [0000:00:1e.6] using ADMA 64-bit
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-1: New USB device found, idVendor=16c0, idProduct=0483
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Serial
usb 1-1: Manufacturer: Teensyduino
usb 1-1: SerialNumber: 1783590
usb 1-2: new high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: ADATA SP550, O1230C, max UDMA/133
ata1.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ADATA SP550 0C PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
e1000e 0000:00:1f.6 eth0: registered PHC clock
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) f4:4d:30:63:34:d0
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[drm] Found 64MB of eDRAM
e1000e 0000:00:1f.6 eno1: renamed from eth0
[drm] Memory usable by graphics device = 4096M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading i915/skl_dmc_ver1.bin (v1.26)
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] failed to retrieve link info, disabling eDP
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0f: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915_bpo 1.6.0 20160425 for 0000:00:02.0 on minor 0
usb 1-2: New USB device found, idVendor=2109, idProduct=2811
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB2.0 Hub
usb 1-2: Manufacturer: VIA Labs, Inc.
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-7: new full-speed USB device number 4 using xhci_hcd
usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
clocksource: Switched to clocksource tsc
usb 1-2.3: new low-speed USB device number 5 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=04f2, idProduct=0833
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Keyboard
usb 1-2.3: Manufacturer: CHICONY
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.4: new low-speed USB device number 6 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=04f2, idProduct=0939
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Optical Mouse
usb 1-2.4: Manufacturer: PixArt
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:04F2:0833.0001/input/input4
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-2.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.1/0003:04F2:0833.0002/input/input5
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-2.3/input1
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:04F2:0939.0003/input/input6
hid-generic 0003:04F2:0939.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.4/input0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started Read required files in advance.
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Set console keymap...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: PNFS blkmaping enablement. is not active.
systemd[1]: Dependency failed for pNFS block layout mapping daemon.
systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Mounted FUSE Control File System.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Started Journal Service.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[214]: Received request to flush runtime journal from PID 1
random: nonblocking pool is initialized
ite_cir: Auto-detected model: ITE8713 CIR transceiver
ite_cir: Using model: ITE8713 CIR transceiver
ite_cir: TX-capable: 1
ite_cir: Sample period (ns): 8680
ite_cir: TX carrier frequency (Hz): 38000
ite_cir: TX duty cycle (%): 33
ite_cir: RX low carrier frequency (Hz): 0
ite_cir: RX high carrier frequency (Hz): 0
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
Registered IR keymap rc-rc6-mce
input: ITE8713 CIR transceiver as /devices/virtual/rc/rc0/input7
rc0: ITE8713 CIR transceiver as /devices/virtual/rc/rc0
IR NEC protocol handler initialized
idma64 idma64.0: Found Intel integrated DMA 64-bit
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR Sony protocol handler initialized
IR JVC protocol handler initialized
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR XMP protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 242
input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input8
ite_cir: driver has been successfully loaded
rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
IR LIRC bridge handler initialized
IR Sharp protocol handler initialized
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
usbcore: registered new interface driver btusb
cdc_acm 1-1:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Bluetooth: hci0: Firmware revision 0.0 build 90 week 25 2015
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:01:00.0: Unsupported splx structure
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-19.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-18.ucode failed with error -2
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-17.ucode failed with error -2
Adding 16662524k swap on /dev/sda5. Priority:-1 extents:1 across:16662524k SSFS
iwlwifi 0000:01:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
dw-apb-uart.0: ttyS4 at MMIO 0xdf14c000 (irq = 20, base_baud = 115200) is a 16550A
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[drm] RC6 on
audit: type=1400 audit(1476996226.037:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1476996226.037:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1476996226.037:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1476996226.037:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
audit: type=1400 audit(1476996226.037:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=699 comm="apparmor_parser"
audit: type=1400 audit(1476996226.037:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=699 comm="apparmor_parser"
audit: type=1400 audit(1476996226.041:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=703 comm="apparmor_parser"
audit: type=1400 audit(1476996226.041:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=705 comm="apparmor_parser"
audit: type=1400 audit(1476996226.041:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=707 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ef4200)
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp1s0: authenticate with 92:2a:a8:48:d7:56
wlp1s0: send auth to 92:2a:a8:48:d7:56 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 92:2a:a8:48:d7:56 (try 1/3)
wlp1s0: RX AssocResp from 92:2a:a8:48:d7:56 (capab=0x411 status=0 aid=5)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=55)
Initialized host personality
NET: Registered protocol family 40
[drm:intel_pipe_update_end [i915_bpo]] *ERROR* Atomic update failure on pipe A (start=45247 end=45248) time 274 us, min 1073, max 1079, scanline start 1067, end 1085
usb 1-2.3: USB disconnect, device number 5
usb 1-2.4: USB disconnect, device number 6
usb 1-2.4: new low-speed USB device number 7 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Keyboard
usb 1-2.4: Manufacturer: CHICONY
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:04F2:0833.0004/input/input14
hid-generic 0003:04F2:0833.0004: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-2.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:04F2:0833.0005/input/input15
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-2.4/input1
usb 1-2.3: new low-speed USB device number 8 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=04f2, idProduct=0939
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:04F2:0939.0006/input/input16
hid-generic 0003:04F2:0939.0006: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
usb 1-1: USB disconnect, device number 2
usb 1-2.3: USB disconnect, device number 8
usb 1-2.4: USB disconnect, device number 7
usb 1-2.4: new low-speed USB device number 9 using xhci_hcd
usb 1-2.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Keyboard
usb 1-2.4: Manufacturer: CHICONY
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:04F2:0833.0007/input/input17
hid-generic 0003:04F2:0833.0007: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-2.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:04F2:0833.0008/input/input18
hid-generic 0003:04F2:0833.0008: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-2.4/input1
usb 1-2.3: new low-speed USB device number 10 using xhci_hcd
usb 1-2.3: New USB device found, idVendor=04f2, idProduct=0939
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Optical Mouse
usb 1-2.3: Manufacturer: PixArt
usb 1-2.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.3/1-2.3:1.0/0003:04F2:0939.0009/input/input19
hid-generic 0003:04F2:0939.0009: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-2.3/input0
perf interrupt took too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5002 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
wlp1s0: deauthenticating from 92:2a:a8:48:d7:56 by local choice (Reason: 3=DEAUTH_LEAVING)
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.001 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ite-cir 00:01: disabled
system 00:00: System wakeup disabled by ACPI
e1000e: EEE TX LPI TIMER: 00000011
PM: suspend of devices complete after 1025.420 msecs
PM: late suspend of devices complete after 18.058 msecs
e1000e 0000:00:1f.6: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 32.118 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 279
smpboot: CPU 1 is now offline
Broke affinity for irq 122
Broke affinity for irq 277
Broke affinity for irq 279
smpboot: CPU 2 is now offline
Broke affinity for irq 8
Broke affinity for irq 9
Broke affinity for irq 10
Broke affinity for irq 14
Broke affinity for irq 20
Broke affinity for irq 122
Broke affinity for irq 275
Broke affinity for irq 277
Broke affinity for irq 279
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
acpi LNXPOWER:16: Turning OFF
acpi LNXPOWER:15: Turning OFF
acpi LNXPOWER:14: Turning OFF
acpi LNXPOWER:13: Turning OFF
acpi LNXPOWER:12: Turning OFF
acpi LNXPOWER:11: Turning OFF
acpi LNXPOWER:10: Turning OFF
acpi LNXPOWER:0f: Turning OFF
acpi LNXPOWER:0e: Turning OFF
acpi LNXPOWER:0d: Turning OFF
acpi LNXPOWER:0c: Turning OFF
acpi LNXPOWER:0b: Turning OFF
acpi LNXPOWER:0a: Turning OFF
acpi LNXPOWER:09: Turning OFF
acpi LNXPOWER:08: Turning OFF
acpi LNXPOWER:07: Turning OFF
acpi LNXPOWER:06: Turning OFF
acpi LNXPOWER:05: Turning OFF
acpi LNXPOWER:04: Turning OFF
acpi LNXPOWER:03: Turning OFF
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 32.142 msecs
PM: early resume of devices complete after 44.205 msecs
e1000e 0000:00:1f.6: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
ite-cir 00:01: activated
rtc_cmos 00:03: System wakeup disabled by ACPI
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
PM: resume of devices complete after 456.194 msecs
PM: Finishing wakeup.
Restarting tasks ...
usb 1-2.4: USB disconnect, device number 9
done.
video LNXVIDEO:00: Restoring backlight state
e1000e: eno1 NIC Link is Down
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[drm] RC6 on
usb 1-2.4: new low-speed USB device number 11 using xhci_hcd
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
usb 1-2.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: USB Keyboard
usb 1-2.4: Manufacturer: CHICONY
usb 1-2.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:04F2:0833.000A/input/input20
wlp1s0: authenticate with 92:2a:a8:48:d7:56
wlp1s0: send auth to 92:2a:a8:48:d7:56 (try 1/3)
wlp1s0: authenticated
wlp1s0: associate with 92:2a:a8:48:d7:56 (try 1/3)
wlp1s0: RX AssocResp from 92:2a:a8:48:d7:56 (capab=0x411 status=0 aid=8)
wlp1s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
hid-generic 0003:04F2:0833.000A: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-2.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.1/0003:04F2:0833.000B/input/input21
hid-generic 0003:04F2:0833.000B: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-2.4/input1