dmesg - test
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-0.29.el7.1.aarch64 (mockbuild@n16.lon1.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-4) (GCC) ) #1 SMP Wed Jun 29 20:38:42 UTC 2016
CPU: AArch64 Processor [500f0001] revision 1
Detected PIPT I-cache on CPU0
efi: Getting EFI parameters from FDT:
EFI v2.40 by American Megatrends
efi: ACPI 2.0=0x807ff49000 ESRT=0x807e171e98 SMBIOS 3.0=0x807e171c98
cma: Reserved 512 MiB at 0x00000000c0000000
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000807FF49000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000807FF49028 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000807FF490A0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000807FF491B0 00527C (v05 ALASKA A M I 00000001 INTL 20130517)
ACPI: GTDT 0x000000807FF4E430 0000E0 (v01 ALASKA A M I 00000001 AMI 00010013)
ACPI: MCFG 0x000000807FF4E510 00007C (v01 APM XGENE 00000001 AMI 00010013)
ACPI: FIDT 0x000000807FF4E590 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SPMI 0x000000807FF4E630 000041 (v05 ALASKA A M I 00000000 AMI. 00000000)
ACPI: APIC 0x000000807FF4E678 0002A4 (v03 APM XGENE 00000003 01000013)
ACPI: SSDT 0x000000807FF4E920 000078 (v02 REDHAT MACADDRS 00000001 01000013)
ACPI: SSDT 0x000000807FF4E998 000032 (v02 REDHAT UARTCLKS 00000001 01000013)
ACPI: SPCR 0x000000807FF4E9D0 000050 (v02 A M I APTIO V 01072009 AMI. 0005000B)
ACPI: BGRT 0x000000807FF4EA20 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
On node 0 totalpages: 524288
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 32768 pages, LIFO batch:1
Normal zone: 480 pages used for memmap
Normal zone: 491520 pages, LIFO batch:1
psci: is not implemented in ACPI.
smp_parking_protocol_cpu_init: ACPI parked addr=80009000
smp_parking_protocol_cpu_init: ACPI parked addr=8000a000
smp_parking_protocol_cpu_init: ACPI parked addr=8000b000
smp_parking_protocol_cpu_init: ACPI parked addr=8000c000
smp_parking_protocol_cpu_init: ACPI parked addr=8000d000
smp_parking_protocol_cpu_init: ACPI parked addr=8000e000
smp_parking_protocol_cpu_init: ACPI parked addr=8000f000
PERCPU: Embedded 2 pages/cpu @fffffe7fffde0000 s90368 r8192 d32512 u131072
pcpu-alloc: s90368 r8192 d32512 u131072 alloc=2*65536
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523776
PID hash table entries: 4096 (order: -1, 32768 bytes)
Dentry cache hash table entries: 4194304 (order: 9, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 8, 16777216 bytes)
software IO TLB [mem 0xfbfd0000-0xfffd0000] (64MB) mapped at [fffffe007bfd0000-fffffe007ffcffff]
Memory: 32791040K/33554432K available (7114K kernel code, 1212K rwdata, 4800K rodata, 896K init, 6358K bss, 239104K reserved, 524288K cma-reserved)
Virtual kernel memory layout:
vmalloc : 0xfffffc0000000000 - 0xfffffdfedfff0000 ( 2043 GB)
vmemmap : 0xfffffdfee0000000 - 0xfffffdffe0000000 ( 4 GB maximum)
0xfffffdfee0200000 - 0xfffffdff00200000 ( 512 MB actual)
fixed : 0xfffffdfffa7d0000 - 0xfffffdfffac00000 ( 4288 KB)
PCI I/O : 0xfffffdfffae00000 - 0xfffffdfffbe00000 ( 16 MB)
modules : 0xfffffdfffc000000 - 0xfffffe0000000000 ( 64 MB)
memory : 0xfffffe0000000000 - 0xfffffe8000000000 (524288 MB)
.init : 0xfffffe0000c40000 - 0xfffffe0000d20000 ( 896 KB)
.text : 0xfffffe0000080000 - 0xfffffe0000c32a34 ( 11979 KB)
.data : 0xfffffe0000d30000 - 0xfffffe0000e5f000 ( 1212 KB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:64 nr_irqs:64 0
clocksource_of_init: no matching clocksources found
Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 65536 (order: 3, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 3, 524288 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
ftrace: allocating 26220 entries in 7 pages
No CPU information found in DT
hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 5 counters available
Remapping and enabling EFI services.
EFI remap 0x0000000082000000 => 0000000040000000
EFI remap 0x00000000fffed000 => 0000000040d0d000
EFI remap 0x000000807cbd2000 => 0000000040d22000
EFI remap 0x000000807cfec000 => 0000000040f6c000
EFI remap 0x000000807d334000 => 0000000040f74000
EFI remap 0x000000807d3fa000 => 0000000040f8a000
EFI remap 0x000000807d907000 => 00000000411d7000
EFI remap 0x000000807d90a000 => 00000000411ea000
EFI remap 0x000000807d925000 => 0000000041215000
EFI remap 0x000000807d92c000 => 000000004122c000
EFI remap 0x000000807d94c000 => 000000004125c000
EFI remap 0x000000807d950000 => 0000000041260000
EFI remap 0x000000807e155000 => 0000000041a75000
EFI remap 0x000000807e158000 => 0000000041a88000
EFI remap 0x000000807e171000 => 0000000041ab1000
EFI remap 0x000000807e176000 => 0000000041ac6000
EFI remap 0x000000807e186000 => 0000000041ae6000
EFI remap 0x000000807e196000 => 0000000041b06000
EFI remap 0x000000807e1c3000 => 0000000041b43000
EFI remap 0x000000807e1c6000 => 0000000041b56000
EFI remap 0x000000807e1e3000 => 0000000041b83000
EFI remap 0x000000807e1e4000 => 0000000041b94000
EFI remap 0x000000807e24f000 => 0000000041c0f000
EFI remap 0x000000807e2e1000 => 0000000041cb1000
EFI remap 0x000000807ffaf000 => 0000000041def000
EFI remap 0x000000807ffcf000 => 0000000041e1f000
EFI remap 0x0000000010510000 => 0000000041e50000
EFI remap 0x0000000010540000 => 0000000041e60000
EFI remap 0x0000000017000000 => 0000000041e70000
EFI remap 0x000000001c020000 => 0000000041e80000
EFI remap 0x000000001c025000 => 0000000041e95000
CPU1: Booted secondary processor
Detected PIPT I-cache on CPU1
CPU2: Booted secondary processor
Detected PIPT I-cache on CPU2
CPU3: Booted secondary processor
Detected PIPT I-cache on CPU3
CPU4: Booted secondary processor
Detected PIPT I-cache on CPU4
CPU5: Booted secondary processor
Detected PIPT I-cache on CPU5
CPU6: Booted secondary processor
Detected PIPT I-cache on CPU6
CPU7: Booted secondary processor
Detected PIPT I-cache on CPU7
Brought up 8 CPUs
SMP: Total of 8 processors activated.
CPU: All CPU(s) started at EL2
devtmpfs: initialized
SMBIOS 3.0.0 present.
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
atomic64_test: passed
NET: Registered protocol family 16
vdso: 2 pages (1 code @ fffffe0000d50000, 1 data @ fffffe0000d40000)
hw-breakpoint: found 4 breakpoint and 4 watchpoint registers.
DMA: preallocated 256 KiB pool for atomic allocations
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: IORT: Failed to get table, AE_NOT_FOUND
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: Using GIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0d0000000-0xe0dfffffff] (base 0xe0d0000000)
PCI: MMCONFIG for domain 0001 [bus 00-ff] at [mem 0xd0d0000000-0xd0dfffffff] (base 0xd0d0000000)
PCI: MMCONFIG for domain 0002 [bus 00-ff] at [mem 0x90d0000000-0x90dfffffff] (base 0x90d0000000)
PCI: MMCONFIG for domain 0003 [bus 00-ff] at [mem 0xa0d0000000-0xa0dfffffff] (base 0xa0d0000000)
PCI: MMCONFIG for domain 0004 [bus 00-ff] at [mem 0xc0d0000000-0xc0dfffffff] (base 0xc0d0000000)
ACPI: Power Resource [SCVR] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
ACPI: IORT: can't find node related to PCI host bridge [segment 0]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0xe140000000-0xe17fffffff] (bus address [0x40000000-0x7fffffff])
pci_bus 0000:00: root bus resource [mem 0xf000000000-0xffffffffff]
pci 0000:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0000:00:00.0: supports D1 D2
ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 00-ff])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
ACPI: IORT: can't find node related to PCI host bridge [segment 2]
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [bus 00-ff]
pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x10000000-0x1000ffff])
pci_bus 0002:00: root bus resource [mem 0x9030000000-0x90afffffff] (bus address [0x30000000-0xafffffff])
pci_bus 0002:00: root bus resource [mem 0x9100000000-0x917fffffff]
pci 0002:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0002:00:00.0: supports D1 D2
pci 0002:01:00.0: [1a03:1150] type 01 class 0x060400
pci 0002:01:00.0: supports D1 D2
pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0002:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0002:02:00.0: [1a03:2000] type 00 class 0x030000
pci 0002:02:00.0: reg 0x10: [mem 0x9030000000-0x9030ffffff]
pci 0002:02:00.0: reg 0x14: [mem 0x9031000000-0x903101ffff]
pci 0002:02:00.0: reg 0x18: [io 0x10000-0x1007f]
pci 0002:02:00.0: supports D1 D2
pci 0002:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
ACPI: PCI Root Bridge [PCI3] (domain 0003 [bus 00-ff])
acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:02: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
ACPI: IORT: can't find node related to PCI host bridge [segment 3]
PCI host bridge to bus 0003:00
pci_bus 0003:00: root bus resource [bus 00-ff]
pci_bus 0003:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
pci_bus 0003:00: root bus resource [mem 0xa140000000-0xa17fffffff] (bus address [0x40000000-0x7fffffff])
pci_bus 0003:00: root bus resource [mem 0xb000000000-0xbfffffffff]
pci 0003:00:00.0: [10e8:e004] type 01 class 0x060400
pci 0003:00:00.0: supports D1 D2
xgene-msi APMC0D0E:00: APM X-Gene PCIe MSI driver loaded
vgaarb: device added: PCI:0002:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0002:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
clocksource: Switched to clocksource arch_sys_counter
pnp: PnP ACPI init
pnp: PnP ACPI: found 0 devices
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 5, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
UDP hash table entries: 16384 (order: 3, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 3, 524288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 38080K (fffffe7ff8310000 - fffffe7ffa840000)
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0xe140000000-0xe17fffffff]
pci_bus 0000:00: resource 6 [mem 0xf000000000-0xffffffffff]
pci 0002:00:00.0: BAR 14: assigned [mem 0x9030000000-0x90317fffff]
pci 0002:00:00.0: BAR 13: assigned [io 0x10000-0x10fff]
pci 0002:01:00.0: BAR 14: assigned [mem 0x9030000000-0x90317fffff]
pci 0002:01:00.0: BAR 13: assigned [io 0x10000-0x10fff]
pci 0002:02:00.0: BAR 0: assigned [mem 0x9030000000-0x9030ffffff]
pci 0002:02:00.0: BAR 1: assigned [mem 0x9031000000-0x903101ffff]
pci 0002:02:00.0: BAR 2: assigned [io 0x10000-0x1007f]
pci 0002:01:00.0: PCI bridge to [bus 02]
pci 0002:01:00.0: bridge window [io 0x10000-0x10fff]
pci 0002:01:00.0: bridge window [mem 0x9030000000-0x90317fffff]
pci 0002:00:00.0: PCI bridge to [bus 01-ff]
pci 0002:00:00.0: bridge window [io 0x10000-0x10fff]
pci 0002:00:00.0: bridge window [mem 0x9030000000-0x90317fffff]
pci_bus 0002:00: resource 4 [io 0x10000-0x1ffff]
pci_bus 0002:00: resource 5 [mem 0x9030000000-0x90afffffff]
pci_bus 0002:00: resource 6 [mem 0x9100000000-0x917fffffff]
pci_bus 0002:01: resource 0 [io 0x10000-0x10fff]
pci_bus 0002:01: resource 1 [mem 0x9030000000-0x90317fffff]
pci_bus 0002:02: resource 0 [io 0x10000-0x10fff]
pci_bus 0002:02: resource 1 [mem 0x9030000000-0x90317fffff]
pci 0003:00:00.0: PCI bridge to [bus 01-ff]
pci_bus 0003:00: resource 4 [io 0x20000-0x2ffff]
pci_bus 0003:00: resource 5 [mem 0xa140000000-0xa17fffffff]
pci_bus 0003:00: resource 6 [mem 0xb000000000-0xbfffffffff]
ACPI: SPCR serial device: 0x1c021000 (options: 115200)
ACPI: SPCR serial console: \_SB_.AHBC.URT1 (0x1c021000)
kvm [1]: GICH base=0x780c0000, GICV base=0x780e0000, IRQ=130
kvm [1]: timer IRQ3
kvm [1]: Hyp mode initialized successfully
futex hash table entries: 2048 (order: 1, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.890:1): initialized
HugeTLB registered 512 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Key type big_key registered
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:00.0:pcie02: service driver aer loaded
aer 0002:00:00.0:pcie02: service driver aer loaded
aer 0003:00:00.0:pcie02: service driver aer loaded
pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded
pcieport 0002:00:00.0: Signaling PME through PCIe PME interrupt
pci 0002:01:00.0: Signaling PME through PCIe PME interrupt
pci 0002:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0002:00:00.0:pcie01: service driver pcie_pme loaded
pcieport 0003:00:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0003:00:00.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
APMC0D08:00: ttyS0 at MMIO 0x1c020000 (irq = 21, base_baud = 3125000) is a U6_16550A
ACPI: adding preferred console [ttyS]
APMC0D08:01: ttyS1 at MMIO 0x1c021000 (irq = 22, base_baud = 3125000) is a U6_16550A
console [ttyS1] enabled
APMC0D08:02: ttyS2 at MMIO 0x1c022000 (irq = 23, base_baud = 3125000) is a U6_16550A
APMC0D08:03: ttyS3 at MMIO 0x1c023000 (irq = 24, base_baud = 3125000) is a U6_16550A
Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
xgene-ahci APMC0D0D:00: skip clock and PHY initialization
xgene-ahci APMC0D0D:00: controller can't do NCQ, turning off CAP_NCQ
xgene-ahci APMC0D0D:00: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
xgene-ahci APMC0D0D:00: flags: 64bit sntf pm only pmp fbs pio slum part ccc
xgene-ahci APMC0D0D:00: port 0 is not capable of FBS
xgene-ahci APMC0D0D:00: port 1 is not capable of FBS
scsi host0: xgene-ahci
scsi host1: xgene-ahci
ata1: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x100 irq 28
ata2: SATA max UDMA/133 mmio [mem 0x1a400000-0x1a400fff] port 0x180 irq 28
xgene-ahci APMC0D0D:01: skip clock and PHY initialization
xgene-ahci APMC0D0D:01: controller can't do NCQ, turning off CAP_NCQ
xgene-ahci APMC0D0D:01: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
xgene-ahci APMC0D0D:01: flags: 64bit sntf pm only pmp fbs pio slum part ccc
xgene-ahci APMC0D0D:01: port 0 is not capable of FBS
xgene-ahci APMC0D0D:01: port 1 is not capable of FBS
scsi host2: xgene-ahci
scsi host3: xgene-ahci
ata3: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x100 irq 29
ata4: SATA max UDMA/133 mmio [mem 0x1a800000-0x1a800fff] port 0x180 irq 29
libphy: Fixed MDIO Bus: probed
xgene-enet APMC0D30:00: clocks have been setup already
xgene-enet APMC0D30:01: clocks have been setup already
xgene-enet APMC0D31:00: clocks have been setup already
xgene-enet APMC0D3F:00: clocks have been setup already
xhci-hcd APMC0D03:00: xHCI Host Controller
xhci-hcd APMC0D03:00: new USB bus registered, assigned bus number 1
xhci-hcd APMC0D03:00: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010
xhci-hcd APMC0D03:00: irq 30, io mem 0x19000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-0.29.el7.1.aarch64 xhci-hcd
usb usb1: SerialNumber: APMC0D03:00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd APMC0D03:00: xHCI Host Controller
xhci-hcd APMC0D03:00: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-0.29.el7.1.aarch64 xhci-hcd
usb usb2: SerialNumber: APMC0D03:00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
xhci-hcd APMC0D03:01: xHCI Host Controller
xhci-hcd APMC0D03:01: new USB bus registered, assigned bus number 3
xhci-hcd APMC0D03:01: hcc params 0x0220f06d hci version 0x100 quirks 0x00010010
xhci-hcd APMC0D03:01: irq 31, io mem 0x19800000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-0.29.el7.1.aarch64 xhci-hcd
usb usb3: SerialNumber: APMC0D03:01
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci-hcd APMC0D03:01: xHCI Host Controller
xhci-hcd APMC0D03:01: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.2.0-0.29.el7.1.aarch64 xhci-hcd
usb usb4: SerialNumber: APMC0D03:01
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ata2: SATA link down (SStatus 0 SControl 4330)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
mousedev: PS/2 mouse device common for all mice
rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
EFI Variables Facility v0.08 2004-May-17
ata4: SATA link down (SStatus 0 SControl 4330)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Red Hat Enterprise Linux Server for ARM kernel signing key: 8008e7d541e99d95b27781fc3927ec9b7e744af9'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
rtc-efi rtc-efi: setting system clock to 2016-10-12 05:10:11 UTC (1476249011)
usb 1-1: new high-speed USB device number 2 using xhci-hcd
ata3: SATA link down (SStatus 0 SControl 4330)
ttyS1 - failed to request DMA
usb 3-1: new high-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=0624, idProduct=0248
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Gadget USB HUB
usb 1-1: Manufacturer: no manufacturer
usb 1-1: SerialNumber: 0123456789
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 4300)
ata1.00: ATA-9: INTEL SSDSC2BB160G4, D2010370, max UDMA/133
ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 0/32)
ata1.00: LPM support broken, forcing max_power
ata1.00: configured for UDMA/133
usb 3-1: New USB device found, idVendor=0bda, idProduct=5401
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BB16 0370 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
GPT:Primary header thinks Alt. header is not at the end of the disk.
GPT:25165823 != 312581807
GPT:Alternate GPT header not at the end of the disk.
GPT:25165823 != 312581807
GPT: Use GNU Parted to correct GPT errors.
sda: sda1 sda2 sda3 sda4
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 896K (fffffe0000c40000 - fffffe0000d20000)
random: systemd urandom read with 2 bits of entropy available
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB3.0 Hub
usb 3-1: Manufacturer: Realtek
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
systemd[1]: Detected architecture arm64.
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Cannot add dependency job for unit multipathd.service, ignoring: Unit blk-availability.service failed to load: No such file or directory.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
usb 3-1.1: new low-speed USB device number 3 using xhci-hcd
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
usb 1-1.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-1.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.1: Product: Keyboard/Mouse Function
usb 1-1.1: Manufacturer: Avocent
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
usb 1-1.1: SerialNumber: 20121018
input: Avocent Keyboard/Mouse Function as /devices/platform/APMC0D03:00/usb1/1-1/1-1.1/1-1.1:1.0/0003:0624:0249.0001/input/input0
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Started Device-Mapper Multipath Device Controller.
systemd[1]: Starting Journal Service...
usb 3-1.1: New USB device found, idVendor=046d, idProduct=c31c
usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Started dracut ask for additional cmdline parameters.
usb 3-1.1: Product: USB Keyboard
usb 3-1.1: Manufacturer: Logitech
systemd[1]: Starting dracut cmdline hook...
hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-APMC0D03:00-1.1/input0
usb 3-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
input: Avocent Keyboard/Mouse Function as /devices/platform/APMC0D03:00/usb1/1-1/1-1.1/1-1.1:1.1/0003:0624:0249.0002/input/input1
hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-APMC0D03:00-1.1/input1
input: Avocent Keyboard/Mouse Function as /devices/platform/APMC0D03:00/usb1/1-1/1-1.1/1-1.1:1.2/0003:0624:0249.0003/input/input2
systemd[1]: Starting Create list of required static device nodes for the current kernel...
input: Logitech USB Keyboard as /devices/platform/APMC0D03:01/usb3/3-1/3-1.1/3-1.1:1.0/0003:046D:C31C.0004/input/input3
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-APMC0D03:00-1.1/input2
hid-generic 0003:046D:C31C.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-APMC0D03:01-1.1/input0
systemd[1]: Starting Setup Virtual Console...
input: Logitech USB Keyboard as /devices/platform/APMC0D03:01/usb3/3-1/3-1.1/3-1.1:1.1/0003:046D:C31C.0005/input/input4
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
usb 1-1.3: new high-speed USB device number 4 using xhci-hcd
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
hid-generic 0003:046D:C31C.0005: input,hidraw4: USB HID v1.10 Device [Logitech USB Keyboard] on usb-APMC0D03:01-1.1/input1
systemd[1]: Started Journal Service.
usb 1-1.3: New USB device found, idVendor=0624, idProduct=0251
usb 1-1.3: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-1.3: Product: Mass Storage Function
usb 1-1.3: Manufacturer: Avocent
usb 1-1.3: SerialNumber: 20120731-1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.32.0-ioctl (2015-6-26) initialised: dm-devel@redhat.com
Loading iSCSI transport class v2.0-870.
usb-storage 1-1.3:1.0: USB Mass Storage device detected
scsi host4: usb-storage 1-1.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
[drm] Initialized drm 1.1.0 20060810
sdhci-acpi APMC0D0C:00: No vmmc regulator found
sdhci-acpi APMC0D0C:00: No vqmmc regulator found
ast 0002:02:00.0: enabling device (0002 -> 0003)
mmc0: SDHCI controller on ACPI [APMC0D0C:00] using PIO
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
[TTM] Zone kernel: Available graphics memory: 16677152 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
Console: switching to colour frame buffer device 160x64
ast 0002:02:00.0: fb0: astdrmfb frame buffer device
ast 0002:02:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0002:02:00.0 on minor 0
SGI XFS with ACLs, security attributes, no debug enabled
XFS (sda4): Mounting V4 Filesystem
XFS (sda4): Ending clean mount
scsi 4:0:0:0: CD-ROM MP EMS Virtual Media 0326 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access MP EMS Virtual Media 0326 PQ: 0 ANSI: 0 CCS
scsi 4:0:0:2: Direct-Access MP EMS Virtual Media 0326 PQ: 0 ANSI: 0 CCS
sd 4:0:0:1: [sdb] Attached SCSI removable disk
sd 4:0:0:2: [sdc] Attached SCSI removable disk
systemd-journald[159]: Received SIGTERM from PID 1 (systemd).
audit: type=1404 audit(1476249014.190:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 32768 avtab hash slots, 112394 rules.
SELinux: 32768 avtab hash slots, 112394 rules.
SELinux: 8 users, 105 roles, 4954 types, 302 bools, 1 sens, 1024 cats
SELinux: 83 classes, 112394 rules
SELinux: Class netlink_iscsi_socket not defined in policy.
SELinux: Class netlink_fib_lookup_socket not defined in policy.
SELinux: Class netlink_connector_socket not defined in policy.
SELinux: Class netlink_netfilter_socket not defined in policy.
SELinux: Class netlink_generic_socket not defined in policy.
SELinux: Class netlink_scsitransport_socket not defined in policy.
SELinux: Class netlink_rdma_socket not defined in policy.
SELinux: Class netlink_crypto_socket not defined in policy.
SELinux: Permission audit_read in class capability2 not defined in policy.
SELinux: Class binder not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
audit: type=1403 audit(1476249014.620:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 449.657ms.
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: Inserted module 'ip_tables'
systemd[1]: Relabelled /dev and /run in 43.589ms.
systemd-journald[577]: Received request to flush runtime journal from PID 1
xgene-slimpro-mbox APMC0D01:00: APM X-Gene SLIMpro MailBox registered
xgene-rng APMC0D18:00: Couldn't get the clock for RNG
xgene-gpio-sb APMC0D15:00: X-Gene GPIO Standby driver registered
xgene-slimpro-i2c APMC0D40:00: Mailbox I2C Adapter registered
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 4:0:0:0: Attached scsi generic sg1 type 5
sd 4:0:0:1: Attached scsi generic sg2 type 0
sd 4:0:0:2: Attached scsi generic sg3 type 0
sr 4:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
Adding 2047936k swap on /dev/sda3. Priority:-1 extents:1 across:2047936k SSFS
XFS (sda2): Mounting V4 Filesystem
XFS (sda2): Ending clean mount
audit: type=1305 audit(1476249016.780:4): audit_pid=709 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
xgene-enet APMC0D30:01 eth1: Link is Down
xgene-enet APMC0D3F:00 eth3: Link is Down
random: nonblocking pool is initialized
usb 1-1.3: USB disconnect, device number 4