dmesg - opengl-nvidia
Linux version 4.7.4-gentoo (root@localhost.localdomain) (gcc version 4.9.3 (Gentoo 4.9.3 p1.5, pie-0.6.4) ) #1 SMP Tue Sep 20 11:49:00 CEST 2016
Command line: BOOT_IMAGE=G4.7.4SDA8 ro root=808
KERNEL supported cpus:
Intel GenuineIntel
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable
BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4c00-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf77ffff] usable
BIOS-e820: [mem 0x00000000bf780000-0x00000000bf797fff] ACPI data
BIOS-e820: [mem 0x00000000bf798000-0x00000000bf7dbfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000033fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/P6X58D PREMIUM, BIOS 0813 05/25/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x340000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EBFFF write-through
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FC0000000 write-back
3 base 0C0000000 mask FC0000000 uncachable
4 base 0BF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Base memory trampoline at [ffff880000096000] 96000 size 24576
BRK [0x01a41000, 0x01a41fff] PGTABLE
BRK [0x01a42000, 0x01a42fff] PGTABLE
BRK [0x01a43000, 0x01a43fff] PGTABLE
BRK [0x01a44000, 0x01a44fff] PGTABLE
BRK [0x01a45000, 0x01a45fff] PGTABLE
BRK [0x01a46000, 0x01a46fff] PGTABLE
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FBA30 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000BF780000 000048 (v01 052510 RSDT1457 20100525 MSFT 00000097)
ACPI: FACP 0x00000000BF780200 000084 (v01 052510 FACP1457 20100525 MSFT 00000097)
ACPI: DSDT 0x00000000BF7804B0 00B384 (v01 A1382 A1382001 00000001 INTL 20060113)
ACPI: FACS 0x00000000BF798000 000040
ACPI: APIC 0x00000000BF780390 0000D8 (v01 052510 APIC1457 20100525 MSFT 00000097)
ACPI: MCFG 0x00000000BF780470 00003C (v01 052510 OEMMCFG 20100525 MSFT 00000097)
ACPI: OEMB 0x00000000BF798040 000072 (v01 052510 OEMB1457 20100525 MSFT 00000097)
ACPI: HPET 0x00000000BF78F4B0 000038 (v01 052510 OEMHPET 20100525 MSFT 00000097)
ACPI: DMAR 0x00000000BF7980C0 000140 (v01 AMI OEMDMAR 00000001 MSFT 00000097)
ACPI: ASPT 0x00000000BF7984B0 000034 (v06 052510 PerfTune 20100525 MSFT 00000097)
ACPI: OSFR 0x00000000BF78F4F0 0000B0 (v01 052510 OEMOSFR 20100525 MSFT 00000097)
ACPI: SSDT 0x00000000BF79A940 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000033fffffff]
NODE_DATA(0) allocated [mem 0x33fff3000-0x33fff6fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000033fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009bfff]
node 0: [mem 0x0000000000100000-0x00000000bf77ffff]
node 0: [mem 0x0000000100000000-0x000000033fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000033fffffff]
On node 0 totalpages: 3143451
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3995 pages, LIFO batch:0
DMA32 zone: 10667 pages used for memmap
DMA32 zone: 780160 pages, LIFO batch:31
Normal zone: 32256 pages used for memmap
Normal zone: 2359296 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 16 CPUs, 8 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf780000-0xbf797fff]
PM: Registered nosave memory: [mem 0xbf798000-0xbf7dbfff]
PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 33 pages/cpu @ffff88033f200000 s94936 r8192 d32040 u262144
pcpu-alloc: s94936 r8192 d32040 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3100451
Policy zone: Normal
Kernel command line: BOOT_IMAGE=G4.7.4SDA8 ro root=808
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 12322800K/12573804K available (4948K kernel code, 764K rwdata, 1712K rodata, 948K init, 560K bss, 251004K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:4352 nr_irqs:960 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3207.296 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6414.59 BogoMIPS (lpj=12829184)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI: 2 ACPI AML tables successfully acquired and loaded
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff819ad000 - ffffffff819b3000)
smpboot: Max logical packages: 4
smpboot: APIC(0) Converting physical 0 to logical package 0
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7 CPU 960 @ 3.20GHz (family: 0x6, model: 0x1a, stepping: 0x5)
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
core: CPU erratum AAJ80 worked around
core: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (51313.95 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf798000-0xbf7dbfff] (278528 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
RTC time: 12:32:50, date: 10/01/16
NET: Registered protocol family 16
cpuidle: using governor ladder
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880332318000 00244C (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: scanning bus
pci 0000:00:00.0: [8086:3405] type 00 class 0x060000
pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3409] type 01 class 0x060400
pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x9800-0x981f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x9880-0x989f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x9c00-0x9c1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf9dff000-0xf9dff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf9df8000-0xf9dfbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x9080-0x909f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x9400-0x941f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x9480-0x949f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf9dfe000-0xf9dfe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: calling quirk_use_pcie_bridge_dma_alias+0x0/0x40
pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x20
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
pci 0000:00:1f.0: calling ich_force_enable_hpet+0x0/0x190
pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x60
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: [8086:3a22] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x8c00-0x8c07]
pci 0000:00:1f.2: reg 0x14: [io 0x8880-0x8883]
pci 0000:00:1f.2: reg 0x18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 0x1c: [io 0x8480-0x8483]
pci 0000:00:1f.2: reg 0x20: [io 0x8400-0x841f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf9dfc000-0xf9dfc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf9dfd000-0xf9dfd0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1000-0x101f]
pci_bus 0000:00: fixups for bus
pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
pci_bus 0000:01: scanning bus
pci 0000:01:00.0: [1b4b:9123] type 00 class 0x010601
pci 0000:01:00.0: reg 0x10: [io 0xac00-0xac07]
pci 0000:01:00.0: reg 0x14: [io 0xa880-0xa883]
pci 0000:01:00.0: reg 0x18: [io 0xa800-0xa807]
pci 0000:01:00.0: reg 0x1c: [io 0xa480-0xa483]
pci 0000:01:00.0: reg 0x20: [io 0xa400-0xa40f]
pci 0000:01:00.0: reg 0x24: [mem 0xf9eff800-0xf9efffff]
pci 0000:01:00.0: reg 0x30: [mem 0xf9ee0000-0xf9eeffff pref]
pci 0000:01:00.0: calling quirk_dma_func1_alias+0x0/0x20
pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
pci 0000:01:00.0: PME# supported from D3hot
pci 0000:01:00.0: PME# disabled
pci_bus 0000:01: fixups for bus
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci_bus 0000:01: bus scan returning with max=01
pci 0000:00:02.0: scanning [bus 02-02] behind bridge, pass 0
pci_bus 0000:02: scanning bus
pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci_bus 0000:02: fixups for bus
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:02: bus scan returning with max=02
pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 0
pci_bus 0000:03: scanning bus
pci 0000:03:00.0: [10de:13c2] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io 0xbc00-0xbc7f]
pci 0000:03:00.0: reg 0x30: [mem 0xfbb00000-0xfbb7ffff pref]
pci 0000:03:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbbfc000-0xfbbfffff]
pci_bus 0000:03: fixups for bus
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:03: bus scan returning with max=03
pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 0
pci_bus 0000:04: scanning bus
pci_bus 0000:04: fixups for bus
pci 0000:00:07.0: PCI bridge to [bus 04]
pci_bus 0000:04: bus scan returning with max=04
pci 0000:00:1c.0: scanning [bus 07-07] behind bridge, pass 0
pci_bus 0000:07: scanning bus
pci_bus 0000:07: fixups for bus
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci_bus 0000:07: bus scan returning with max=07
pci 0000:00:1c.2: scanning [bus 06-06] behind bridge, pass 0
pci_bus 0000:06: scanning bus
pci 0000:06:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfbdfc000-0xfbdfffff 64bit]
pci 0000:06:00.0: reg 0x18: [io 0xd800-0xd8ff]
pci 0000:06:00.0: reg 0x30: [mem 0xfbdc0000-0xfbddffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci_bus 0000:06: fixups for bus
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: bus scan returning with max=06
pci 0000:00:1c.5: scanning [bus 05-05] behind bridge, pass 0
pci_bus 0000:05: scanning bus
pci 0000:05:00.0: [11ab:4364] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
pci 0000:05:00.0: reg 0x18: [io 0xc800-0xc8ff]
pci 0000:05:00.0: reg 0x30: [mem 0xfbcc0000-0xfbcdffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci_bus 0000:05: fixups for bus
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: bus scan returning with max=05
pci 0000:00:1e.0: scanning [bus 08-08] behind bridge, pass 0
pci_bus 0000:08: scanning bus
pci 0000:08:02.0: [1106:3044] type 00 class 0x0c0010
pci 0000:08:02.0: reg 0x10: [mem 0xfbeff000-0xfbeff7ff]
pci 0000:08:02.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:08:02.0: supports D2
pci 0000:08:02.0: PME# supported from D2 D3hot D3cold
pci 0000:08:02.0: PME# disabled
pci_bus 0000:08: fixups for bus
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
pci_bus 0000:08: bus scan returning with max=08
pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
pci 0000:00:02.0: scanning [bus 02-02] behind bridge, pass 1
pci 0000:00:03.0: scanning [bus 03-03] behind bridge, pass 1
pci 0000:00:07.0: scanning [bus 04-04] behind bridge, pass 1
pci 0000:00:1c.0: scanning [bus 07-07] behind bridge, pass 1
pci 0000:00:1c.2: scanning [bus 06-06] behind bridge, pass 1
pci 0000:00:1c.5: scanning [bus 05-05] behind bridge, pass 1
pci 0000:00:1e.0: scanning [bus 08-08] behind bridge, pass 1
pci_bus 0000:00: bus scan returning with max=08
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
Linux video capture interface: v2.00
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus ff
PCI: root bus ff: using default resources
PCI: Probing PCI hardware (bus ff)
ACPI: \: failed to evaluate _DSM (0x1001)
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
pci_bus 0000:ff: scanning bus
pci 0000:ff:00.0: [8086:2c41] type 00 class 0x060000
pci 0000:ff:00.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:00.1: [8086:2c01] type 00 class 0x060000
pci 0000:ff:00.1: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:02.0: [8086:2c10] type 00 class 0x060000
pci 0000:ff:02.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:02.1: [8086:2c11] type 00 class 0x060000
pci 0000:ff:02.1: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:03.0: [8086:2c18] type 00 class 0x060000
pci 0000:ff:03.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:03.1: [8086:2c19] type 00 class 0x060000
pci 0000:ff:03.1: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:03.4: [8086:2c1c] type 00 class 0x060000
pci 0000:ff:03.4: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:04.0: [8086:2c20] type 00 class 0x060000
pci 0000:ff:04.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:04.1: [8086:2c21] type 00 class 0x060000
pci 0000:ff:04.1: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:04.2: [8086:2c22] type 00 class 0x060000
pci 0000:ff:04.2: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:04.3: [8086:2c23] type 00 class 0x060000
pci 0000:ff:04.3: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:05.0: [8086:2c28] type 00 class 0x060000
pci 0000:ff:05.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:05.1: [8086:2c29] type 00 class 0x060000
pci 0000:ff:05.1: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:05.2: [8086:2c2a] type 00 class 0x060000
pci 0000:ff:05.2: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:05.3: [8086:2c2b] type 00 class 0x060000
pci 0000:ff:05.3: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:06.0: [8086:2c30] type 00 class 0x060000
pci 0000:ff:06.0: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:06.1: [8086:2c31] type 00 class 0x060000
pci 0000:ff:06.1: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:06.2: [8086:2c32] type 00 class 0x060000
pci 0000:ff:06.2: calling quirk_mmio_always_on+0x0/0x10
pci 0000:ff:06.3: [8086:2c33] type 00 class 0x060000
pci 0000:ff:06.3: calling quirk_mmio_always_on+0x0/0x10
pci_bus 0000:ff: fixups for bus
pci_bus 0000:ff: bus scan returning with max=ff
pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
PCI: pci_cache_line_size set to 64 bytes
pci 0000:01:00.0: BAR 0: reserving [io 0xac00-0xac07 flags 0x40101] (d=0, p=0)
pci 0000:01:00.0: BAR 1: reserving [io 0xa880-0xa883 flags 0x40101] (d=0, p=0)
pci 0000:01:00.0: BAR 2: reserving [io 0xa800-0xa807 flags 0x40101] (d=0, p=0)
pci 0000:01:00.0: BAR 3: reserving [io 0xa480-0xa483 flags 0x40101] (d=0, p=0)
pci 0000:01:00.0: BAR 4: reserving [io 0xa400-0xa40f flags 0x40101] (d=0, p=0)
pci 0000:01:00.0: BAR 5: reserving [mem 0xf9eff800-0xf9efffff flags 0x40200] (d=0, p=0)
pci 0000:02:00.0: BAR 0: reserving [mem 0xf9ffe000-0xf9ffffff flags 0x140204] (d=0, p=0)
pci 0000:03:00.0: BAR 0: reserving [mem 0xfa000000-0xfaffffff flags 0x40200] (d=0, p=0)
pci 0000:03:00.0: BAR 1: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0)
pci 0000:03:00.0: BAR 3: reserving [mem 0xce000000-0xcfffffff flags 0x14220c] (d=0, p=0)
pci 0000:03:00.0: BAR 5: reserving [io 0xbc00-0xbc7f flags 0x40101] (d=0, p=0)
pci 0000:03:00.1: BAR 0: reserving [mem 0xfbbfc000-0xfbbfffff flags 0x40200] (d=0, p=0)
pci 0000:00:1a.0: BAR 4: reserving [io 0x9800-0x981f flags 0x40101] (d=0, p=0)
pci 0000:00:1a.1: BAR 4: reserving [io 0x9880-0x989f flags 0x40101] (d=0, p=0)
pci 0000:00:1a.2: BAR 4: reserving [io 0x9c00-0x9c1f flags 0x40101] (d=0, p=0)
pci 0000:00:1a.7: BAR 0: reserving [mem 0xf9dff000-0xf9dff3ff flags 0x40200] (d=0, p=0)
pci 0000:00:1b.0: BAR 0: reserving [mem 0xf9df8000-0xf9dfbfff flags 0x140204] (d=0, p=0)
pci 0000:06:00.0: BAR 0: reserving [mem 0xfbdfc000-0xfbdfffff flags 0x140204] (d=0, p=0)
pci 0000:06:00.0: BAR 2: reserving [io 0xd800-0xd8ff flags 0x40101] (d=0, p=0)
pci 0000:05:00.0: BAR 0: reserving [mem 0xfbcfc000-0xfbcfffff flags 0x140204] (d=0, p=0)
pci 0000:05:00.0: BAR 2: reserving [io 0xc800-0xc8ff flags 0x40101] (d=0, p=0)
pci 0000:00:1d.0: BAR 4: reserving [io 0x9080-0x909f flags 0x40101] (d=0, p=0)
pci 0000:00:1d.1: BAR 4: reserving [io 0x9400-0x941f flags 0x40101] (d=0, p=0)
pci 0000:00:1d.2: BAR 4: reserving [io 0x9480-0x949f flags 0x40101] (d=0, p=0)
pci 0000:00:1d.7: BAR 0: reserving [mem 0xf9dfe000-0xf9dfe3ff flags 0x40200] (d=0, p=0)
pci 0000:08:02.0: BAR 0: reserving [mem 0xfbeff000-0xfbeff7ff flags 0x40200] (d=0, p=0)
pci 0000:08:02.0: BAR 1: reserving [io 0xec00-0xec7f flags 0x40101] (d=0, p=0)
pci 0000:00:1f.2: BAR 0: reserving [io 0x8c00-0x8c07 flags 0x40101] (d=0, p=0)
pci 0000:00:1f.2: BAR 1: reserving [io 0x8880-0x8883 flags 0x40101] (d=0, p=0)
pci 0000:00:1f.2: BAR 2: reserving [io 0x8800-0x8807 flags 0x40101] (d=0, p=0)
pci 0000:00:1f.2: BAR 3: reserving [io 0x8480-0x8483 flags 0x40101] (d=0, p=0)
pci 0000:00:1f.2: BAR 4: reserving [io 0x8400-0x841f flags 0x40101] (d=0, p=0)
pci 0000:00:1f.2: BAR 5: reserving [mem 0xf9dfc000-0xf9dfc7ff flags 0x40200] (d=0, p=0)
pci 0000:00:1f.3: BAR 0: reserving [mem 0xf9dfd000-0xf9dfd0ff flags 0x140204] (d=0, p=0)
pci 0000:00:1f.3: BAR 4: reserving [io 0x1000-0x101f flags 0x40101] (d=0, p=0)
e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf780000-0xbfffffff]
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfbf00000-0xfbffffff] has been reserved
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: [mem 0xfec8a000-0xfec8afff] could not be reserved
system 00:00: [mem 0xfed10000-0xfed10fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0290-0x029f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0800-0x087f] has been reserved
system 00:03: [io 0x0500-0x057f] could not be reserved
system 00:03: [io 0x0600-0x0607] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:09: [mem 0xfed90000-0xffffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 07] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 07] add_size 400000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: res[7]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
pci 0000:00:01.0: bridge window [mem 0xf9e00000-0xf9efffff]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:02.0: bridge window [mem 0xf9f00000-0xf9ffffff]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:03.0: bridge window [mem 0xfa000000-0xfbbfffff]
pci 0000:00:03.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 05]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
pci_bus 0000:01: resource 1 [mem 0xf9e00000-0xf9efffff]
pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfbbfffff]
pci_bus 0000:03: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff]
pci_bus 0000:07: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xe000-0xefff]
pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:08: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff window]
pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]
pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:02:00.0: calling quirk_usb_early_handoff+0x0/0x670
pci 0000:03:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x20
pci 0000:03:00.0: calling pci_fixup_video+0x0/0xf0
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x20
PCI: CLS 256 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbb780000-0xbf780000] (64MB) mapped at [ffff8800bb780000-ffff8800bf77ffff]
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1475325170.020:1): initialized
workingset: timestamp_bits=54 max_order=22 bucket_order=0
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
Linux agpgart interface v0.103
brd: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc180 irq 27
ata3: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc200 irq 27
ata4: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc280 irq 27
ata5: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc300 irq 27
ata6: SATA max UDMA/133 abar m2048@0xf9dfc000 port 0xf9dfc380 irq 27
ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:01:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
ahci 0000:01:00.0: port 0 can do FBS, forcing FBSCP
ahci 0000:01:00.0: port 1 can do FBS, forcing FBSCP
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9eff900 irq 29
ata8: SATA max UDMA/133 abar m2048@0xf9eff800 port 0xf9eff980 irq 29
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
hidraw: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
Key type dns_resolver registered
microcode: CPU0 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU1 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU2 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU3 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU4 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU5 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU6 sig=0x106a5, pf=0x2, revision=0xf
microcode: CPU7 sig=0x106a5, pf=0x2, revision=0xf
microcode: Microcode Update Driver: v2.01 , Peter Oruba
Magic number: 4:847:530
rtc_cmos 00:01: setting system clock to 2016-10-01 12:32:51 UTC (1475325171)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 370)
ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 370)
ata7.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
tsc: Refined TSC clocksource calibration: 3207.272 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e3b1f431f7, max_idle_ns: 440795241363 ns
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL05, max UDMA/133
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL05 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
ata3: SATA link down (SStatus 0 SControl 300)
input: ImExPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input2
ata4: SATA link down (SStatus 0 SControl 300)
clocksource: Switched to clocksource tsc
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
sd 6:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 6:0:0:0: [sda] Attached SCSI removable disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext3 filesystem) readonly on device 8:8.
Freeing unused kernel memory: 948K (ffffffff818c0000 - ffffffff819ad000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1176K (ffff8800014da000 - ffff880001600000)
Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
random: nonblocking pool is initialized
udevd[1553]: starting version 3.2
udevd[1554]: starting eudev-3.2
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ATK0110 ATK0110:00: adding...
ATK0110 ATK0110:00: board ID = P6T-Deluxe
ATK0110 ATK0110:00: Using old hwmon interface
ATK0110 ATK0110:00: voltage: 0x6020000 Vcore Voltage [800-1600] enabled
ATK0110 ATK0110:00: voltage: 0x6020001 +3.3 Voltage [2970-3630] enabled
ATK0110 ATK0110:00: voltage: 0x6020002 +5 Voltage [4500-5500] enabled
ATK0110 ATK0110:00: voltage: 0x6020003 +12 Voltage [10200-13800] enabled
ATK0110 ATK0110:00: temperature: 0x6030000 CPU Temperature [600-750] enabled
ATK0110 ATK0110:00: temperature: 0x6030001 MB Temperature [450-750] enabled
ATK0110 ATK0110:00: fan: 0x6040000 CPU FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: fan: 0x6040001 CHASSIS1 FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: fan: 0x6040002 CHASSIS2 FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: fan: 0x6040003 CHASSIS3 FAN Speed [600-7200] enabled
ATK0110 ATK0110:00: fan: 0x6040004 POWER FAN Speed [0-7200] enabled
ATK0110 ATK0110:00: registering hwmon device
ATK0110 ATK0110:00: populating sysfs directory
xhci_hcd 0000:02:00.0: enabling bus mastering
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
xhci_hcd 0000:02:00.0: enabling Mem-Wr-Inval
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: SystemIO range 0x0000000000001000-0x000000000000101F conflicts with OpRegion 0x0000000000001000-0x000000000000100F (\SMRG) (20160422/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
coretemp coretemp.0: TjMax is 98 degrees C
coretemp coretemp.0: TjMax is 98 degrees C
coretemp coretemp.0: TjMax is 98 degrees C
coretemp coretemp.0: TjMax is 98 degrees C
input: PC Speaker as /devices/platform/pcspkr/input/input5
sky2: driver version 1.30
sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:06:00.0 eth0: addr 48:5b:39:7e:18:5e
sky2 0000:05:00.0: Yukon-2 EC Ultra chip revision 3
sky2 0000:05:00.0 eth1: addr 48:5b:39:7e:12:67
sky2 0000:05:00.0 enp5s0: renamed from eth1
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
sky2 0000:06:00.0 enp6s0: renamed from eth0
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: enabling bus mastering
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 256 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9dff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: enabling bus mastering
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 256 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9dfe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: enabling bus mastering
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: enabling bus mastering
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: enabling bus mastering
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: enabling bus mastering
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: enabling bus mastering
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: enabling bus mastering
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC889: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input17
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
nvidia-nvlink: Nvlink Core is being initialized, major device number 248
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 370.28 Thu Sep 1 19:45:04 PDT 2016
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 370.28 Thu Sep 1 19:18:48 PDT 2016
[drm] [nvidia-drm] [GPU ID 0x00000300] Loading driver
floppy0: no floppy controllers found
EXT4-fs (sda8): re-mounted. Opts: (null)
Adding 10490408k swap on /dev/sda7. Priority:-1 extents:1 across:10490408k
sky2 0000:06:00.0 enp6s0: enabling interface
sky2 0000:05:00.0 enp5s0: enabling interface
sky2 0000:05:00.0 enp5s0: Link is up at 100 Mbps, full duplex, flow control both
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
NET: Registered protocol family 17
nvidia-modeset: Allocated GPU:0 (GPU-c74e6e5d-83ae-a1c9-33ed-a7aedb86ec93) @ PCI:0000:03:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 6
snd_hda_intel 0000:03:00.1: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU5: Core temperature above threshold, cpu clock throttled (total events = 3493)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 3493)
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
sky2 0000:05:00.0 enp5s0: Link is down
sky2 0000:05:00.0 enp5s0: Link is up at 100 Mbps, full duplex, flow control both
CPU5: Core temperature above threshold, cpu clock throttled (total events = 4290)
CPU1: Core temperature above threshold, cpu clock throttled (total events = 4290)
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 64954)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 64954)
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 75833)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 75833)
mce: [Hardware Error]: Machine check events logged
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU5: Core temperature/speed normal
CPU1: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 372315)
CPU5: Core temperature above threshold, cpu clock throttled (total events = 372315)
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
CPU5: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
kactivitymanage[2673]: segfault at 7f4dab88dc50 ip 00007f4dab7aa171 sp 00007fffb0ef0398 error 4 in libQt5Sql.so.5.6.1[7f4dab795000+43000]
nvidia-modeset: Freed GPU:0 (GPU-c74e6e5d-83ae-a1c9-33ed-a7aedb86ec93) @ PCI:0000:03:00.0
nvidia-modeset: Allocated GPU:0 (GPU-c74e6e5d-83ae-a1c9-33ed-a7aedb86ec93) @ PCI:0000:03:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 6
nvidia-modeset: Freed GPU:0 (GPU-c74e6e5d-83ae-a1c9-33ed-a7aedb86ec93) @ PCI:0000:03:00.0
nvidia-modeset: Allocated GPU:0 (GPU-c74e6e5d-83ae-a1c9-33ed-a7aedb86ec93) @ PCI:0000:03:00.0
snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 6