dmesg - test-plan-build
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012AA5C400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012AADD000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88012AA58800 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PC05] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7a1d000-0xf7a1d01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:06:00.0: [168c:0036] type 00 class 0x028000
pci 0000:06:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
pci 0000:06:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:07:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:07:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
pci 0000:07:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:08:00.0: [10de:1140] type 00 class 0x030200
pci 0000:08:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:08:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:08:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:08:00.0: reg 0x24: [io 0xd000-0xd07f]
pci 0000:08:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbac32000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbb063000-0xbbffffff]
e820: reserve RAM buffer [mem 0xca861000-0xcbffffff]
e820: reserve RAM buffer [mem 0x12fe00000-0x12fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [mem 0xfe800000-0xfe802fff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:06: [mem 0xfe10c000-0xfe10cfff] has been reserved
system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fee000-0xf7feefff] has been reserved
system 00:07: [mem 0xf7fd0000-0xf7fdffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.2: PCI bridge to [bus 06]
pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
pci_bus 0000:06: resource 1 [mem 0xf7900000-0xf79fffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf7800000-0xf78fffff]
pci_bus 0000:07: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:08: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 21824K (ffff880035550000 - ffff880036aa0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc6861000-0xca861000] (64MB) mapped at [ffff8800c6861000-ffff8800ca860fff]
RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1472582163.748:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7731
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2016-08-30 18:36:04 UTC (1472582164)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
systemd-udevd[71]: starting version 215
random: systemd-udevd urandom read with 2 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:07:00.0: irq 56 for MSI/MSI-X
r8169 0000:07:00.0 eth0: RTL8106e at 0xffffc90000014000, b8:2a:72:af:16:f8, XID 04900000 IRQ 56
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver hub
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (45 C)
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
MXM: GUID detected in BIOS
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
pci 0000:08:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PEGP handle
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
libata version 3.00 loaded.
nouveau [ DEVICE][0000:08:00.0] BOOT0 : 0x0d7000a2
nouveau [ DEVICE][0000:08:00.0] Chipset: GF117 (NVD7)
nouveau [ DEVICE][0000:08:00.0] Family : NVD0
nouveau [ VBIOS][0000:08:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:08:00.0] ... signature not found
nouveau [ VBIOS][0000:08:00.0] checking PROM for image...
nouveau [ VBIOS][0000:08:00.0] ... signature not found
nouveau [ VBIOS][0000:08:00.0] checking ACPI for image...
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 1696.073 MHz
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: New USB device found, idVendor=8087, idProduct=8000
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
Switched to clocksource tsc
nouveau [ VBIOS][0000:08:00.0] ... appears to be valid
nouveau [ VBIOS][0000:08:00.0] using image from ACPI
nouveau [ VBIOS][0000:08:00.0] BIT signature found
nouveau [ VBIOS][0000:08:00.0] version 75.17.86.00.04
nouveau [ VBIOS][0000:08:00.0] running init tables
nouveau 0000:08:00.0: irq 58 for MSI/MSI-X
nouveau [ PMC][0000:08:00.0] MSI interrupts enabled
nouveau W[ PFB][0000:08:00.0][0x00000000][ffff88012987d800] reclocking of this ram type unsupported
nouveau [ PFB][0000:08:00.0] RAM type: DDR3
nouveau [ PFB][0000:08:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:08:00.0] ZCOMP: 0 tags
usb 3-1.3: new full-speed USB device number 3 using ehci-pci
usb 3-1.3: New USB device found, idVendor=1ea7, idProduct=0064
usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1.3: Product: 2.4G Mouse
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: 2.4G Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:1EA7:0064.0001/input/input5
hid-generic 0003:1EA7:0064.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:00:1d.0-1.3/input0
usb 3-1.5: new high-speed USB device number 4 using ehci-pci
usb 3-1.5: New USB device found, idVendor=0c45, idProduct=6a04
usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 3-1.5: Product: Integrated_Webcam_HD
usb 3-1.5: Manufacturer: CNFDH85F3040100017P2
usb 3-1.6: new full-speed USB device number 5 using ehci-pci
usb 3-1.6: New USB device found, idVendor=0cf3, idProduct=0036
usb 3-1.6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-1.8: new high-speed USB device number 6 using ehci-pci
usb 3-1.8: New USB device found, idVendor=0bda, idProduct=0129
usb 3-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.8: Product: USB2.0-CRW
usb 3-1.8: Manufacturer: Generic
usb 3-1.8: SerialNumber: 20100201396000000
usbcore: registered new interface driver rtsx_usb
nouveau [ PTHERM][0000:08:00.0] FAN control: none / external
nouveau [ PTHERM][0000:08:00.0] internal sensor: yes
nouveau [ CLK][0000:08:00.0] 07: core 162 MHz memory 405 MHz
nouveau [ CLK][0000:08:00.0] 0f: core 625 MHz memory 900 MHz
nouveau [ CLK][0000:08:00.0] --: core 270 MHz memory 324 MHz
[TTM] Zone kernel: Available graphics memory: 1980418 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau E[ DRM] Pointer to TMDS table invalid
nouveau [ DRM] DCB version 4.0
nouveau E[ DRM] Pointer to flat panel table invalid
nouveau [ DRM] MM: using COPY0 for buffer copies
[drm] Initialized nouveau 1.1.2 20120801 for 0000:08:00.0 on minor 0
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 59 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vga_switcheroo: enabled
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] seamless DRRS supported for eDP panel.
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20140424/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.RP05.PEGP.DD02._BCL] (Node ffff88012f08b680), AE_NOT_FOUND (20140424/psparse-536)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:00/input/input6
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a100 irq 60
ata2: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a180 irq 60
ata3: DUMMY
ata4: DUMMY
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU90N, A101, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU90N A101 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
random: nonblocking pool is initialized
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
systemd[1]: Found ordering cycle on basic.target/start
systemd[1]: Found dependency on paths.target/start
systemd[1]: Found dependency on cups.path/start
systemd[1]: Found dependency on sysinit.target/start
systemd[1]: Found dependency on rpcbind.service/start
systemd[1]: Found dependency on network-online.target/start
systemd[1]: Found dependency on NetworkManager-wait-online.service/start
systemd[1]: Found dependency on basic.target/start
systemd[1]: Breaking ordering cycle by deleting job paths.target/start
systemd[1]: Job paths.target/start deleted to break ordering cycle starting with basic.target/start
systemd[1]: Found ordering cycle on basic.target/start
systemd[1]: Found dependency on sysinit.target/start
systemd[1]: Found dependency on rpcbind.service/start
systemd[1]: Found dependency on network-online.target/start
systemd[1]: Found dependency on NetworkManager-wait-online.service/start
systemd[1]: Found dependency on basic.target/start
systemd[1]: Breaking ordering cycle by deleting job rpcbind.service/start
systemd[1]: Job rpcbind.service/start deleted to break ordering cycle starting with basic.target/start
systemd-udevd[189]: starting version 215
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.23)
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=59)
Initialized host personality
ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /devices/platform/pcspkr/input/input8
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
hid-rmi 0018:06CB:2985.0002: Scanning PDT...
hid-rmi 0018:06CB:2985.0002: Found F34 on page 0x00
hid-rmi 0018:06CB:2985.0002: Found F01 on page 0x00
hid-rmi 0018:06CB:2985.0002: Found F11 on page 0x00
hid-rmi 0018:06CB:2985.0002: Found F54 on page 0x01
hid-rmi 0018:06CB:2985.0002: Found F30 on page 0x01
hid-rmi 0018:06CB:2985.0002: Found F55 on page 0x02
hid-rmi 0018:06CB:2985.0002: rmi_scan_pdt: Done with PDT scan.
hid-rmi 0018:06CB:2985.0002: rmi_populate_f11: size in mm: 102 x 57
input: DLL0652:00 06CB:2985 as /devices/pci0000:00/INT33C3:00/i2c-10/i2c-DLL0652:00/0018:06CB:2985.0002/input/input9
hid-rmi 0018:06CB:2985.0002: input,hidraw1: HID v1.00 Mouse [DLL0652:00 06CB:2985] on
input: Dell WMI hotkeys as /devices/virtual/input/input10
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
AVX2 version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
ath: phy0: WB335 1-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
ath: phy0: Enable LNA combining
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
alg: No test for crc32 (crc32-pclmul)
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
sound hdaudioC1D0: mono: mono_out=0x0
sound hdaudioC1D0: inputs:
sound hdaudioC1D0: Headset Mic=0x19
sound hdaudioC1D0: Headphone Mic=0x1a
sound hdaudioC1D0: Internal Mic=0x12
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90018580000, irq=18
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Adding 8190972k swap on /dev/sda5. Priority:-1 extents:1 across:8190972k FS
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
usbcore: registered new interface driver btusb
usb 3-1.6: firmware: failed to load ar3k/AthrBT_0x31010000.dfu (-2)
usb 3-1.6: Direct firmware load failed with error -2
usb 3-1.6: Falling back to user helper
Bluetooth: Loading patch file failed
ath3k: probe of 3-1.6:1.0 failed with error -12
usbcore: registered new interface driver ath3k
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a04)
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[194]: Received request to flush runtime journal from PID 1
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 1696063968 Hz
vboxdrv: Successfully loaded version 5.1.4 (interface 0x00260000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
r8169 0000:07:00.0: firmware: failed to load rtl_nic/rtl8106e-1.fw (-2)
r8169 0000:07:00.0: Direct firmware load failed with error -2
r8169 0000:07:00.0: Falling back to user helper
r8169 0000:07:00.0 eth0: unable to load firmware patch rtl_nic/rtl8106e-1.fw (-12)
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
wlan0: authenticate with f4:0f:1b:b2:65:50
wlan0: send auth to f4:0f:1b:b2:65:50 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:b2:65:50 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:b2:65:50 (capab=0x431 status=0 aid=1)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:38:50
wlan0: send auth to f4:0f:1b:da:38:50 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:da:38:50 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:38:50 (capab=0x431 status=0 aid=30)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:46:b0
wlan0: send auth to f4:0f:1b:da:46:b0 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:da:46:b0 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:46:b0 (capab=0x431 status=0 aid=7)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:b5:2f:e0
wlan0: send auth to f4:0f:1b:b5:2f:e0 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: send auth to f4:0f:1b:b5:2f:e0 (try 2/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:b5:2f:e0 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:b5:2f:e0 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:46:b0
wlan0: send auth to f4:0f:1b:da:46:b0 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:da:46:b0 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:46:b0 (capab=0x431 status=0 aid=7)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:b2:65:50
wlan0: send auth to f4:0f:1b:b2:65:50 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:b2:65:50 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:b2:65:50 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:38:50
wlan0: send auth to f4:0f:1b:da:38:50 (try 1/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:da:38:50 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:38:50 (capab=0x431 status=0 aid=20)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
traps: chrome[6427] general protection ip:7ff4e0073532 sp:7ffc46f65290 error:0 in libc-2.19.so[7ff4e003d000+1a2000]
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
wlan0: authenticate with f4:0f:1b:da:46:b0
wlan0: send auth to f4:0f:1b:da:46:b0 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: associate with f4:0f:1b:da:46:b0 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:46:b0 (capab=0x431 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:38:50
wlan0: send auth to f4:0f:1b:da:38:50 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: associate with f4:0f:1b:da:38:50 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:38:50 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:46:b0
wlan0: send auth to f4:0f:1b:da:46:b0 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with f4:0f:1b:da:46:b0 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: associate with f4:0f:1b:da:46:b0 (try 2/3)
wlan0: associate with f4:0f:1b:da:46:b0 (try 3/3)
wlan0: RX AssocResp from f4:0f:1b:da:46:b0 (capab=0x431 status=0 aid=3)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:38:50
wlan0: send auth to f4:0f:1b:da:38:50 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: associate with f4:0f:1b:da:38:50 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:38:50 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:46:b0
wlan0: direct probe to f4:0f:1b:da:46:b0 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: send auth to f4:0f:1b:da:46:b0 (try 2/3)
wlan0: authenticated
wlan0: associate with f4:0f:1b:da:46:b0 (try 1/3)
wlan0: RX AssocResp from f4:0f:1b:da:46:b0 (capab=0x431 status=0 aid=1)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
wlan0: authenticate with f4:0f:1b:da:38:50
wlan0: send auth to f4:0f:1b:da:38:50 (try 1/3)
wlan0: authenticated
cfg80211: Calling CRDA to update world regulatory domain
wlan0: associate with f4:0f:1b:da:38:50 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: associate with f4:0f:1b:da:38:50 (try 2/3)
wlan0: associate with f4:0f:1b:da:38:50 (try 3/3)
wlan0: RX AssocResp from f4:0f:1b:da:38:50 (capab=0x431 status=0 aid=14)
wlan0: associated
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
pci_bus 0000:04: Allocating resources
pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
pci_bus 0000:06: Allocating resources
pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
pci_bus 0000:07: Allocating resources
pci_bus 0000:08: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xcf600000-0xcf7fffff 64bit pref]
pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
acpi device:49: Cannot transition to power state D3cold for parent in (unknown)
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: Max Payload Size 16384, but upstream 0000:00:1c.4 set to 128; if necessary, use "pci=pcie_bus_safe" and report a bug
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
wlan0: deauthenticating from f4:0f:1b:da:38:50 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1264.222 msecs
PM: late suspend of devices complete after 15.990 msecs
r8169 0000:07:00.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 16.322 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
Broke affinity for irq 56
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
Broke affinity for irq 18
Broke affinity for irq 23
Broke affinity for irq 60
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
Intel pstate controlling: cpu 1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
kvm: enabling virtualization on CPU2
Intel pstate controlling: cpu 2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
Intel pstate controlling: cpu 3
CPU3 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 122.951 msecs
PM: early resume of devices complete after 0.443 msecs
mei_me 0000:00:16.0: irq 61 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
r8169 0000:07:00.0: System wakeup disabled by ACPI
snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:08:00.0] running init tables
sd 0:0:0:0: [sda] Starting disk
nouveau [ CLK][0000:08:00.0] --: core 270 MHz memory 324 MHz
r8169 0000:07:00.0 eth0: link down
nouveau [ DRM] resuming client object trees...
usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/100
usb 3-1.6: reset full-speed USB device number 5 using ehci-pci
usb 3-1.5: reset high-speed USB device number 4 using ehci-pci
usb 3-1.8: reset high-speed USB device number 6 using ehci-pci
PM: resume of devices complete after 830.151 msecs
PM: Finishing wakeup.
Restarting tasks ...
ath9k 0000:06:00.0: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pci_bus 0000:04: Allocating resources
pci_bus 0000:06: Allocating resources
pci_bus 0000:07: Allocating resources
pci_bus 0000:08: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
pci_bus 0000:04: Allocating resources
pci_bus 0000:06: Allocating resources
pci_bus 0000:07: Allocating resources
pci_bus 0000:08: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.2: no hotplug settings from platform
ath9k 0000:06:00.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
r8169 0000:07:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
nouveau 0000:08:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
done.
hid-rmi 0018:06CB:2985.0002: unknown intr source:02 /build/linux-7z1rSb/linux-3.16.7-ckt25/drivers/hid/hid-rmi.c:393
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wlan0: authenticate with 40:f2:01:f0:2f:5f
wlan0: send auth to 40:f2:01:f0:2f:5f (try 1/3)
wlan0: authenticated
wlan0: associate with 40:f2:01:f0:2f:5f (try 1/3)
wlan0: RX AssocResp from 40:f2:01:f0:2f:5f (capab=0x431 status=0 aid=7)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: CA
ath: EEPROM regdomain: 0x807c
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: CA
ath: Regpair used: 0x3a
ath: regdomain 0x807c dynamically updated by country IE
cfg80211: Regulatory domain changed to country: CA
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: configured for UDMA/133
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
traps: chrome[24513] general protection ip:7fd08b282532 sp:7ffd5145f3e0 error:0 in libc-2.19.so[7fd08b24c000+1a2000]
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.RP05.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
perf interrupt took too long (2543 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5007 > 5000), lowering kernel.perf_event_max_sample_rate to 25000