Xorg.0.log - Qemu-KVM
X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
Current Operating System: Linux debianTCC 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2+deb8u3 (2016-07-02) x86_64
Build Date: 11 February 2015 12:32:02AM
xorg-server 2:1.16.4-1 ()
Current version of pixman: 0.32.6
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 28 14:48:46 2016
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7f2c4c0c3d80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 18.0
X.Org XInput driver : 21.0
X.Org Server Extension : 8.0
(II) xfree86: Adding drm device (/dev/dri/card0)
(--) PCI:*(0:0:2:0) 1234:1111:1af4:1100 rev 2, Mem @ 0xfd000000/16777216, 0xfebf0000/4096, BIOS @ 0x????????/65536
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.16.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 8.0
(==) AIGLX enabled
(==) Matched modesetting as autoconfigured driver 0
(==) Matched fbdev as autoconfigured driver 1
(==) Matched vesa as autoconfigured driver 2
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "modesetting"
(II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
(II) Module modesetting: vendor="X.Org Foundation"
compiled for 1.16.4, module version = 0.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 18.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.15.99.904, module version = 0.4.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 18.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.15.99.904, module version = 2.3.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 18.0
(II) modesetting: Driver for Modesetting Kernel Drivers: kms
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(++) using VT number 7
(II) modesetting(0): using drv /dev/dri/card0
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.16.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 18.0
(WW) Falling back to old probe method for vesa
(II) modesetting(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) modesetting(0): Depth 24, (==) framebuffer bpp 32
(==) modesetting(0): RGB weight 888
(==) modesetting(0): Default visual is TrueColor
(II) modesetting(0): ShadowFB: preferred NO, enabled NO
(II) modesetting(0): Output Virtual-0 has no monitor section
(II) modesetting(0): EDID for output Virtual-0
(II) modesetting(0): Printing probed modes for output Virtual-0
(II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
(II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
(II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
(II) modesetting(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
(II) modesetting(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
(II) modesetting(0): Modeline "1400x1050"x59.9 101.00 1400 1448 1480 1560 1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
(II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
(II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
(II) modesetting(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
(II) modesetting(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
(II) modesetting(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
(II) modesetting(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
(II) modesetting(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
(II) modesetting(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
(II) modesetting(0): Modeline "1280x768"x60.0 68.25 1280 1328 1360 1440 768 771 778 790 +hsync -vsync (47.4 kHz e)
(II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
(II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
(II) modesetting(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
(II) modesetting(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
(II) modesetting(0): Output Virtual-0 connected
(II) modesetting(0): Using exact sizes for initial modes
(II) modesetting(0): Output Virtual-0 using initial mode 1024x768
(II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) modesetting(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.16.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "fbdev"
(II) Unloading fbdev
(II) UnloadSubModule: "fbdevhw"
(II) Unloading fbdevhw
(II) UnloadModule: "vesa"
(II) Unloading vesa
(==) Depth 24 pixmap format is 32 bpp
(==) modesetting(0): Backing store enabled
(==) modesetting(0): Silken mouse enabled
(II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) modesetting(0): DPMS enabled
(--) RandR disabled
(II) SELinux: Disabled on system
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) modesetting(0): Damage tracking initialized
(II) modesetting(0): Setting screen physical size to 270 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.16.0, module version = 2.9.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 21.0
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event2"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
(**) AT Translated Set 2 keyboard: always reports core events
(**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
(--) evdev: AT Translated Set 2 keyboard: Found keys
(II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "br"
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event1)
(**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
(**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "vmmouse"
(II) LoadModule: "vmmouse"
(II) Loading /usr/lib/xorg/modules/input/vmmouse_drv.so
(II) Module vmmouse: vendor="X.Org Foundation"
compiled for 1.15.99.904, module version = 13.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 21.0
(II) VMWARE(0): VMMOUSE module was loaded
(II) Using input driver 'vmmouse' for 'ImExPS/2 Generic Explorer Mouse'
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(II) VMWARE(0): vmmouse is available
(**) Option "Device" "/dev/input/event1"
(**) ImExPS/2 Generic Explorer Mouse: ZAxisMapping: buttons 4 and 5
(**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1"
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 8)
(II) VMWARE(0): VMMOUSE DEVICE_INIT
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
(**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
(**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
(II) VMWARE(0): VMMOUSE DEVICE_ON
(II) VMWARE(0): vmmouse enabled
(II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) VMWARE(0): vmmouse enable absolute mode