dmesg - JN20

Return To JN20 System Information

microcode: microcode updated early to revision 0xba, date = 2010-10-03
Linux version 4.6.4-201.fc23.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 5.3.1 20160406 (Red Hat 5.3.1-6) (GCC) ) #1 SMP Tue Jul 12 11:43:59 UTC 2016
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000afeeffff] usable
BIOS-e820: [mem 0x00000000afef0000-0x00000000afef2fff] ACPI NVS
BIOS-e820: [mem 0x00000000afef3000-0x00000000afefffff] ACPI data
BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000f0000000-0x00000000f1ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: System manufacturer System Product Name/P5N32-E SLI PLUS, BIOS ASUS P5N32-E SLI PLUS ACPI BIOS Revision 0805 08/22/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x150000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CCFFF write-protect
  CD000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 080000000 mask FE0000000 write-back
  2 base 0A0000000 mask FF0000000 write-back
  3 base 100000000 mask FC0000000 write-back
  4 base 140000000 mask FF0000000 write-back
  5 base 0AFF00000 mask FFFF00000 uncachable
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xafef0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5fd0-0x000f5fdf] mapped at [ffff8800000f5fd0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x02062000, 0x02062fff] PGTABLE
BRK [0x02063000, 0x02063fff] PGTABLE
BRK [0x02064000, 0x02064fff] PGTABLE
BRK [0x02065000, 0x02065fff] PGTABLE
BRK [0x02066000, 0x02066fff] PGTABLE
RAMDISK: [mem 0x3596e000-0x36caefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F7B00 000024 (v02 Nvidia)
ACPI: XSDT 0x00000000AFEF30C0 000044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: FACP 0x00000000AFEFB640 0000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20160108/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20160108/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20160108/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20160108/tbfadt-623)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe1Block: 128/8 (20160108/tbfadt-623)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20160108/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20160108/tbfadt-704)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20160108/tbfadt-704)
ACPI: DSDT 0x00000000AFEF3240 0083B1 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 0x00000000AFEF0000 000040
ACPI: FACS 0x00000000AFEF0000 000040
ACPI: HPET 0x00000000AFEFB880 000038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
ACPI: MCFG 0x00000000AFEFB900 00003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: APIC 0x00000000AFEFB780 000098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014fffffff]
NODE_DATA(0) allocated [mem 0x14ffe6000-0x14fffcfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000014fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000afeeffff]
  node   0: [mem 0x0000000100000000-0x000000014fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000014fffffff]
On node 0 totalpages: 1048206
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 11196 pages used for memmap
  DMA32 zone: 716528 pages, LIFO batch:31
  Normal zone: 5120 pages used for memmap
  Normal zone: 327680 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfeff0000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xafef0000-0xafef2fff]
PM: Registered nosave memory: [mem 0xafef3000-0xafefffff]
PM: Registered nosave memory: [mem 0xaff00000-0xafffffff]
PM: Registered nosave memory: [mem 0xb0000000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xf1ffffff]
PM: Registered nosave memory: [mem 0xf2000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xc0000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 34 pages/cpu @ffff88014fc00000 s99096 r8192 d31976 u524288
pcpu-alloc: s99096 r8192 d31976 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031805
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 4023740K/4192824K available (8060K kernel code, 1333K rwdata, 3256K rodata, 1568K init, 1540K bss, 169084K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:65792 nr_irqs:456 16
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-3.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2666.699 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.39 BogoMIPS (lpj=2666699)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 1 ACPI AML tables successfully acquired and loaded

Security Framework initialized
Yama: becoming mindful.
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81ed7000 - ffffffff81edf000)
ftrace: allocating 30244 entries in 119 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz (family: 0x6, model: 0xf, stepping: 0xb)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (10666.42 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xafef0000-0xafef2fff] (12288 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 20:54:46, date: 08/06/16
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xaff00000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [10de:03a3] type 00 class 0x060000
pci 0000:00:00.1: [10de:03ac] type 00 class 0x050000
pci 0000:00:00.2: [10de:03aa] type 00 class 0x050000
pci 0000:00:00.3: [10de:03a9] type 00 class 0x050000
pci 0000:00:00.4: [10de:03ab] type 00 class 0x050000
pci 0000:00:00.5: [10de:03a8] type 00 class 0x050000
pci 0000:00:00.6: [10de:03b5] type 00 class 0x050000
pci 0000:00:00.7: [10de:03b4] type 00 class 0x050000
pci 0000:00:01.0: [10de:03ad] type 00 class 0x050000
pci 0000:00:01.1: [10de:03ae] type 00 class 0x050000
pci 0000:00:01.2: [10de:03af] type 00 class 0x050000
pci 0000:00:01.3: [10de:03b0] type 00 class 0x050000
pci 0000:00:01.4: [10de:03b1] type 00 class 0x050000
pci 0000:00:01.5: [10de:03b2] type 00 class 0x050000
pci 0000:00:01.6: [10de:03b3] type 00 class 0x050000
pci 0000:00:02.0: [10de:03b6] type 00 class 0x050000
pci 0000:00:02.1: [10de:03bc] type 00 class 0x050000
pci 0000:00:02.2: [10de:03ba] type 00 class 0x050000
pci 0000:00:03.0: [10de:03b7] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [10de:03b9] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [10de:03bb] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0369] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0360] type 00 class 0x060100
pci 0000:00:0a.1: [10de:0368] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x10: [io  0xff00-0xff3f]
pci 0000:00:0a.1: reg 0x20: [io  0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 0x24: [io  0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0b.0: [10de:036c] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xeffff000-0xefffffff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0b.1: [10de:036d] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xefffe000-0xefffe0ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:036e] type 00 class 0x01018a
pci 0000:00:0d.0: reg 0x20: [io  0xfc00-0xfc0f]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:0e.0: [10de:037f] type 00 class 0x010185
pci 0000:00:0e.0: reg 0x10: [io  0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io  0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io  0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io  0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io  0xf700-0xf70f]
pci 0000:00:0e.0: reg 0x24: [mem 0xefffd000-0xefffdfff]
pci 0000:00:0e.1: [10de:037f] type 00 class 0x010185
pci 0000:00:0e.1: reg 0x10: [io  0x09e0-0x09e7]
pci 0000:00:0e.1: reg 0x14: [io  0x0be0-0x0be3]
pci 0000:00:0e.1: reg 0x18: [io  0x0960-0x0967]
pci 0000:00:0e.1: reg 0x1c: [io  0x0b60-0x0b63]
pci 0000:00:0e.1: reg 0x20: [io  0xf200-0xf20f]
pci 0000:00:0e.1: reg 0x24: [mem 0xefffc000-0xefffcfff]
pci 0000:00:0e.2: [10de:037f] type 00 class 0x010185
pci 0000:00:0e.2: reg 0x10: [io  0xf100-0xf107]
pci 0000:00:0e.2: reg 0x14: [io  0xf000-0xf003]
pci 0000:00:0e.2: reg 0x18: [io  0xef00-0xef07]
pci 0000:00:0e.2: reg 0x1c: [io  0xee00-0xee03]
pci 0000:00:0e.2: reg 0x20: [io  0xed00-0xed0f]
pci 0000:00:0e.2: reg 0x24: [mem 0xefffb000-0xefffbfff]
pci 0000:00:0f.0: [10de:0370] type 01 class 0x060401
pci 0000:00:0f.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [10de:0373] type 00 class 0x068000
pci 0000:00:11.0: Disabling msi for MCP55 NIC on P5N32-SLI
pci 0000:00:11.0: reg 0x10: [mem 0xefffa000-0xefffafff]
pci 0000:00:11.0: reg 0x14: [io  0xec00-0xec07]
pci 0000:00:11.0: reg 0x18: [mem 0xefff9000-0xefff90ff]
pci 0000:00:11.0: reg 0x1c: [mem 0xefff8000-0xefff800f]
pci 0000:00:11.0: supports D1 D2
pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:11.0: System wakeup disabled by ACPI
pci 0000:00:12.0: [10de:0373] type 00 class 0x068000
pci 0000:00:12.0: Disabling msi for MCP55 NIC on P5N32-SLI
pci 0000:00:12.0: reg 0x10: [mem 0xefff7000-0xefff7fff]
pci 0000:00:12.0: reg 0x14: [io  0xeb00-0xeb07]
pci 0000:00:12.0: reg 0x18: [mem 0xefff6000-0xefff60ff]
pci 0000:00:12.0: reg 0x1c: [mem 0xefff5000-0xefff500f]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:13.0: [10de:0376] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [10de:0374] type 01 class 0x060400
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:15.0: [10de:0374] type 01 class 0x060400
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [10de:0378] type 01 class 0x060400
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:17.0: [10de:0375] type 01 class 0x060400
pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:17.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [10de:0377] type 01 class 0x060400
pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:05e6] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xea000000-0xebffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io  0xdf00-0xdf7f]
pci 0000:01:00.0: reg 0x30: [mem 0xedf80000-0xedffffff pref]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xea000000-0xedffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xefc00000-0xefcfffff]
pci 0000:00:06.0:   bridge window [mem 0xef900000-0xef9fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:07.0:   bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:07.0:   bridge window [mem 0xefd00000-0xefdfffff 64bit pref]
pci 0000:04:06.0: [13f6:0111] type 00 class 0x040100
pci 0000:04:06.0: reg 0x10: [io  0xcc00-0xccff]
pci 0000:04:06.0: supports D1 D2
pci 0000:04:0b.0: [1106:3044] type 00 class 0x0c0010
pci 0000:04:0b.0: reg 0x10: [mem 0xefbff000-0xefbff7ff]
pci 0000:04:0b.0: reg 0x14: [io  0xcf00-0xcf7f]
pci 0000:04:0b.0: supports D2
pci 0000:04:0b.0: PME# supported from D2 D3hot D3cold
pci 0000:00:0f.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:0f.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0f.0:   bridge window [mem 0xefb00000-0xefbfffff]
pci 0000:00:0f.0:   bridge window [mem 0xefa00000-0xefafffff pref]
pci 0000:00:0f.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:0f.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:0f.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:0f.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:0f.0:   bridge window [mem 0xaff00000-0xfebfffff window] (subtractive decode)
pci 0000:00:13.0: PCI bridge to [bus 05]
pci 0000:00:13.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:13.0:   bridge window [mem 0xef800000-0xef8fffff]
pci 0000:00:13.0:   bridge window [mem 0xef700000-0xef7fffff 64bit pref]
pci 0000:00:14.0: PCI bridge to [bus 06]
pci 0000:00:14.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:14.0:   bridge window [mem 0xef600000-0xef6fffff]
pci 0000:00:14.0:   bridge window [mem 0xef500000-0xef5fffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:15.0:   bridge window [mem 0xef400000-0xef4fffff]
pci 0000:00:15.0:   bridge window [mem 0xef300000-0xef3fffff 64bit pref]
pci 0000:00:16.0: PCI bridge to [bus 08]
pci 0000:00:16.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:16.0:   bridge window [mem 0xef200000-0xef2fffff]
pci 0000:00:16.0:   bridge window [mem 0xef100000-0xef1fffff 64bit pref]
pci 0000:00:17.0: PCI bridge to [bus 09]
pci 0000:00:17.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:17.0:   bridge window [mem 0xef000000-0xef0fffff]
pci 0000:00:17.0:   bridge window [mem 0xeef00000-0xeeffffff 64bit pref]
pci 0000:0a:00.0: [10de:05e6] type 00 class 0x030000
pci 0000:0a:00.0: reg 0x10: [mem 0xe8000000-0xe8ffffff]
pci 0000:0a:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:0a:00.0: reg 0x1c: [mem 0xe6000000-0xe7ffffff 64bit]
pci 0000:0a:00.0: reg 0x24: [io  0x4f00-0x4f7f]
pci 0000:0a:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:00:18.0: PCI bridge to [bus 0a]
pci 0000:00:18.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:18.0:   bridge window [mem 0xe6000000-0xe9ffffff]
pci 0000:00:18.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:0a:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0a:00.0
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0xafef0000-0xafffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io  0x1000-0x107f] has been reserved
system 00:00: [io  0x1080-0x10ff] has been reserved
system 00:00: [io  0x1400-0x147f] has been reserved
system 00:00: [io  0x1480-0x14ff] has been reserved
system 00:00: [io  0x1800-0x187f] has been reserved
system 00:00: [io  0x1880-0x18ff] has been reserved
system 00:00: [mem 0xb0000000-0xbfffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0297] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [dma 2]
pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:04: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:05: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:05: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:05: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:05: [mem 0xfeff0000-0xfeff00ff] has been reserved
system 00:05: [mem 0xafef0000-0xafefffff] could not be reserved
system 00:05: [mem 0xffff0000-0xffffffff] has been reserved
system 00:05: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:05: [mem 0x00100000-0xafeeffff] could not be reserved
system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:05: [mem 0xfeff0000-0xfeff03ff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:00:03.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:03.0:   bridge window [mem 0xea000000-0xedffffff]
pci 0000:00:03.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0:   bridge window [io  0xb000-0xbfff]
pci 0000:00:06.0:   bridge window [mem 0xefc00000-0xefcfffff]
pci 0000:00:06.0:   bridge window [mem 0xef900000-0xef9fffff 64bit pref]
pci 0000:00:07.0: PCI bridge to [bus 03]
pci 0000:00:07.0:   bridge window [io  0xa000-0xafff]
pci 0000:00:07.0:   bridge window [mem 0xefe00000-0xefefffff]
pci 0000:00:07.0:   bridge window [mem 0xefd00000-0xefdfffff 64bit pref]
pci 0000:00:0f.0: PCI bridge to [bus 04]
pci 0000:00:0f.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:0f.0:   bridge window [mem 0xefb00000-0xefbfffff]
pci 0000:00:0f.0:   bridge window [mem 0xefa00000-0xefafffff pref]
pci 0000:00:13.0: PCI bridge to [bus 05]
pci 0000:00:13.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:13.0:   bridge window [mem 0xef800000-0xef8fffff]
pci 0000:00:13.0:   bridge window [mem 0xef700000-0xef7fffff 64bit pref]
pci 0000:00:14.0: PCI bridge to [bus 06]
pci 0000:00:14.0:   bridge window [io  0x8000-0x8fff]
pci 0000:00:14.0:   bridge window [mem 0xef600000-0xef6fffff]
pci 0000:00:14.0:   bridge window [mem 0xef500000-0xef5fffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 07]
pci 0000:00:15.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:15.0:   bridge window [mem 0xef400000-0xef4fffff]
pci 0000:00:15.0:   bridge window [mem 0xef300000-0xef3fffff 64bit pref]
pci 0000:00:16.0: PCI bridge to [bus 08]
pci 0000:00:16.0:   bridge window [io  0x6000-0x6fff]
pci 0000:00:16.0:   bridge window [mem 0xef200000-0xef2fffff]
pci 0000:00:16.0:   bridge window [mem 0xef100000-0xef1fffff 64bit pref]
pci 0000:00:17.0: PCI bridge to [bus 09]
pci 0000:00:17.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:17.0:   bridge window [mem 0xef000000-0xef0fffff]
pci 0000:00:17.0:   bridge window [mem 0xeef00000-0xeeffffff 64bit pref]
pci 0000:0a:00.0: BAR 6: assigned [mem 0xe9000000-0xe907ffff pref]
pci 0000:00:18.0: PCI bridge to [bus 0a]
pci 0000:00:18.0:   bridge window [io  0x4000-0x4fff]
pci 0000:00:18.0:   bridge window [mem 0xe6000000-0xe9ffffff]
pci 0000:00:18.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xaff00000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xea000000-0xedffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:02: resource 1 [mem 0xefc00000-0xefcfffff]
pci_bus 0000:02: resource 2 [mem 0xef900000-0xef9fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xa000-0xafff]
pci_bus 0000:03: resource 1 [mem 0xefe00000-0xefefffff]
pci_bus 0000:03: resource 2 [mem 0xefd00000-0xefdfffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xefb00000-0xefbfffff]
pci_bus 0000:04: resource 2 [mem 0xefa00000-0xefafffff pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 8 [mem 0xaff00000-0xfebfffff window]
pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xef800000-0xef8fffff]
pci_bus 0000:05: resource 2 [mem 0xef700000-0xef7fffff 64bit pref]
pci_bus 0000:06: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:06: resource 1 [mem 0xef600000-0xef6fffff]
pci_bus 0000:06: resource 2 [mem 0xef500000-0xef5fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:07: resource 1 [mem 0xef400000-0xef4fffff]
pci_bus 0000:07: resource 2 [mem 0xef300000-0xef3fffff 64bit pref]
pci_bus 0000:08: resource 0 [io  0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xef200000-0xef2fffff]
pci_bus 0000:08: resource 2 [mem 0xef100000-0xef1fffff 64bit pref]
pci_bus 0000:09: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:09: resource 1 [mem 0xef000000-0xef0fffff]
pci_bus 0000:09: resource 2 [mem 0xeef00000-0xeeffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io  0x4000-0x4fff]
pci_bus 0000:0a: resource 1 [mem 0xe6000000-0xe9ffffff]
pci_bus 0000:0a: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 19716K (ffff88003596e000 - ffff880036caf000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xabef0000-0xafef0000] (64MB) mapped at [ffff8800abef0000-ffff8800afeeffff]
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1470516886.563:1): initialized
Initialise system trusted keyring
workingset: timestamp_bits=34 max_order=20 bucket_order=0
zbud: loaded
Key type big_key registered
SELinux:  Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x1200x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xeb000000, mapped to 0xffffc90000800000, using 7552k, total 7552k
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xefffe000
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.6.4-201.fc23.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xeffff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 4.6.4-201.fc23.x86_64 ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xba
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xba
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: f59e5d94ca289ff085a1a1af5a6825606dd58184'
zswap: loaded using pool lzo/zbud
  Magic number: 12:475:952
tty tty9: hash matches
memory memory5: hash matches
rtc_cmos 00:02: setting system clock to 2016-08-06 20:54:46 UTC (1470516886)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1568K (ffffffff81d4f000 - ffffffff81ed7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 116K (ffff8800017e3000 - ffff880001800000)
Freeing unused kernel memory: 840K (ffff880001b2e000 - ffff880001c00000)
random: systemd urandom read with 3 bits of entropy available
systemd[1]: systemd 222 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Audit Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Load Kernel Modules.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Starting Journal Service...
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Create list of required static device nodes for the current kernel.
audit: type=1130 audit(1470516886.560:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Apply Kernel Variables.
audit: type=1130 audit(1470516886.560:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1470516886.572:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1470516886.643:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470516886.676:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470516886.712:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470516886.721:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470516886.728:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-1: new high-speed USB device number 2 using ehci-pci
audit: type=1130 audit(1470516886.774:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
usb 1-1: New USB device found, idVendor=0424, idProduct=2514
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
hub 1-1:1.0: 4 ports detected
pata_amd 0000:00:0d.0: version 0.4.1
scsi host0: pata_amd
scsi host1: pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
sata_nv 0000:00:0e.0: Using SWNCQ mode
scsi host2: sata_nv
[drm] Initialized drm 1.1.0 20060810
scsi host3: sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 21
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 21
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
sata_nv 0000:00:0e.1: Using SWNCQ mode
scsi host4: sata_nv
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
scsi host5: sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 20
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 20
ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
sata_nv 0000:00:0e.2: Using SWNCQ mode
scsi host6: sata_nv
wmi: Mapper loaded
scsi host7: sata_nv
ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 23
ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 23
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
usb 1-2: new high-speed USB device number 3 using ehci-pci
firewire_ohci 0000:04:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
checking generic (eb000000 760000) vs hw (d0000000 10000000)
checking generic (eb000000 760000) vs hw (ea000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
nouveau 0000:01:00.0: NVIDIA GT200 (0a0300b1)
usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB 2.0 Hub
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
ata1.00: ATA-7: ST3300831A, 3.03, max UDMA/100
ata1.00: 586072368 sectors, multi 1: LBA48 
ata1.01: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100
ata1.01: 625142448 sectors, multi 1: LBA48 
ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x1f)
ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c60000) ACPI=0x3f01f (20:20:0x1f)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
nouveau 0000:01:00.0: bios: version 62.00.59.00.02
scsi 0:0:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
nouveau 0000:01:00.0: fb: 896 MiB GDDR3
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: Direct-Access     ATA      WDC WD3200JB-00K 5J08 PQ: 0 ANSI: 5
[TTM] Zone  kernel: Available graphics memory: 2023006 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 896 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 04000320 00000028
nouveau 0000:01:00.0: DRM: DCB outp 01: 01000322 00020030
nouveau 0000:01:00.0: DRM: DCB outp 02: 02011310 00000028
nouveau 0000:01:00.0: DRM: DCB outp 03: 02022302 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
sd 0:0:1:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2: port disabled--ignoring
ata3: SATA link down (SStatus 0 SControl 300)
 sdb: sdb1
sd 0:0:1:0: [sdb] Attached SCSI disk
nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x80000, bo ffff880036be4c00
fbcon: nouveaufb (fb0) is primary device
tsc: Refined TSC clocksource calibration: 2666.666 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26703cd6786, max_idle_ns: 440795256025 ns
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Console: switching to colour frame buffer device 240x75
ata5.00: ATA-7: CORSAIR CMFSSD-128GBG2D, VBM19C1Q, max UDMA/100
ata5.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
ata5.00: configured for UDMA/100
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
nouveau 0000:0a:00.0: enabling device (0000 -> 0003)
nouveau 0000:0a:00.0: NVIDIA GT200 (0a0300b1)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-2.3: new full-speed USB device number 5 using ehci-pci
ata7.00: ATA-7: CORSAIR CMFSSD-128GBG2D, VBM19C1Q, max UDMA/100
ata7.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata7.00: configured for UDMA/100
usb 2-4: new full-speed USB device number 2 using ohci-pci
forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 19, addr 00:1d:60:72:b4:34
forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
usb 1-2.3: New USB device found, idVendor=046d, idProduct=c52e
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.3: Product: USB Receiver
usb 1-2.3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.0/0003:046D:C52E.0001/input/input5
firewire_core 0000:04:0b.0: created device fw0: GUID 0011d800017975ae, S400
nouveau 0000:0a:00.0: bios: version 62.00.60.00.01
hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.1-2.3/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.1/usb1/1-2/1-2.3/1-2.3:1.1/0003:046D:C52E.0002/input/input6
hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.1-2.3/input1
nouveau 0000:0a:00.0: fb: 896 MiB GDDR3
nouveau 0000:0a:00.0: DRM: VRAM: 896 MiB
nouveau 0000:0a:00.0: DRM: GART: 1048576 MiB
nouveau 0000:0a:00.0: DRM: TMDS table version 2.0
nouveau 0000:0a:00.0: DRM: DCB version 4.0
nouveau 0000:0a:00.0: DRM: DCB outp 00: 04000320 00000028
nouveau 0000:0a:00.0: DRM: DCB outp 01: 01000322 00020030
nouveau 0000:0a:00.0: DRM: DCB outp 02: 02011310 00000028
nouveau 0000:0a:00.0: DRM: DCB outp 03: 02011312 00020030
nouveau 0000:0a:00.0: DRM: DCB outp 04: 010223f1 00c1c023
nouveau 0000:0a:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:0a:00.0: DRM: DCB conn 01: 00002130
nouveau 0000:0a:00.0: DRM: DCB conn 02: 00000210
nouveau 0000:0a:00.0: DRM: DCB conn 03: 00000211
nouveau 0000:0a:00.0: DRM: DCB conn 04: 00000213
nouveau 0000:0a:00.0: DRM: DCB conn 05: 00000360
nouveau 0000:0a:00.0: DRM: failed to create encoder 0/1/0: -19
nouveau 0000:0a:00.0: DRM: TV-1 has no encoders, removing
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:0a:00.0: DRM: MM: using CRYPT for buffer copies
nouveau 0000:0a:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau 0000:0a:00.0: DRM: allocated 1024x768 fb: 0x80000, bo ffff880149365c00
nouveau 0000:0a:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:0a:00.0 on minor 1
usb 2-4: New USB device found, idVendor=044f, idProduct=b10a
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: T.16000M
usb 2-4: Manufacturer: Thrustmaster
input: Thrustmaster T.16000M as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/0003:044F:B10A.0003/input/input7
hid-generic 0003:044F:B10A.0003: input,hidraw2: USB HID v1.00 Joystick [Thrustmaster T.16000M] on usb-0000:00:0b.0-4/input0
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-H653G, DW10, max UDMA/100
ata4.00: applying bridge limits
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653G DW10 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
scsi 4:0:0:0: Direct-Access     ATA      CORSAIR CMFSSD-1 9C1Q PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 19, addr 00:1d:60:72:af:8e
forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
forcedeth 0000:00:12.0 enp0s18: renamed from eth1
forcedeth 0000:00:11.0 enp0s17: renamed from eth0
md: bind
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-7: CORSAIR CMFSSD-128GBG2D, VBM19C1Q, max UDMA/100
ata6.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access     ATA      CORSAIR CMFSSD-1 9C1Q PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdd] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access     ATA      CORSAIR CMFSSD-1 9C1Q PQ: 0 ANSI: 5
 sdd: sdd1 sdd2
sd 5:0:0:0: [sdd] Attached SCSI disk
sd 6:0:0:0: [sde] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1
sd 6:0:0:0: [sde] Attached SCSI disk
md: bind
md: bind
clocksource: Switched to clocksource tsc
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-7: CORSAIR CMFSSD-128GBG2D, VBM19C1Q, max UDMA/100
ata8.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/100
scsi 7:0:0:0: Direct-Access     ATA      CORSAIR CMFSSD-1 9C1Q PQ: 0 ANSI: 5
sd 7:0:0:0: [sdf] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 7:0:0:0: Attached scsi generic sg6 type 0
 sdf: sdf1
sd 7:0:0:0: [sdf] Attached SCSI disk
md: bind
md: raid0 personality registered for level 0
md/raid0:md127: md_size is 995647488 sectors.
md: RAID0 configuration for md127 - 1 zone
md: zone0=[sdc1/sdd2/sde1/sdf1]
      zone-offset=         0KB, device-offset=         0KB, size= 497823744KB
md127: detected capacity change from 0 to 509771513856
random: nonblocking pool is initialized
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[130]: Received SIGTERM from PID 1 (systemd).
SELinux: 32768 avtab hash slots, 103756 rules.
SELinux: 32768 avtab hash slots, 103756 rules.
SELinux:  8 users, 14 roles, 4944 types, 306 bools, 1 sens, 1024 cats
SELinux:  92 classes, 103756 rules
SELinux:  Permission validate_trans in class security not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 77.366ms.
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: Relabelled /dev and /run in 21.818ms.
EXT4-fs (dm-0): re-mounted. Opts: (null)
systemd-journald[671]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
audit_printk_skb: 159 callbacks suppressed
audit: type=1130 audit(1470513291.480:64): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470513291.501:65): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470513291.563:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
i2c i2c-12: nForce2 SMBus adapter at 0x1c00
ACPI Warning: SystemIO range 0x0000000000001C80-0x0000000000001CBF conflicts with OpRegion 0x0000000000001C80-0x0000000000001C85 (\_SB.PCI0.SM01) (20160108/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000001C80-0x0000000000001CBF conflicts with OpRegion 0x0000000000001C80-0x0000000000001C85 (\_SB.PCI0.SM00) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot detected
nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
Adding 4063228k swap on /dev/mapper/fedora_jez--athlon-swap.  Priority:-1 extents:1 across:4063228k FS
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
audit: type=1130 audit(1470513292.196:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-pvscan@9:127 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470513292.337:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470513292.475:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1470513292.475:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470513292.490:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1470513292.507:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=nfs-config comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
it87: Found IT8718F chip at 0x290, revision 2
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\IP) (20160108/utaddress-255)
ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_SB.PCI0.ASOC.HWRE) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x2c0 offMax=0x1640
vboxdrv: TSC mode is Synchronous, tentative frequency 2666823463 Hz
vboxdrv: Successfully loaded version 5.0.26 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): enp0s17: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
forcedeth 0000:00:12.0 enp0s18: no link during initialization
IPv6: ADDRCONF(NETDEV_UP): enp0s18: link is not ready
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Key type dns_resolver registered
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
vgaarb: device changed decodes: PCI:0000:0a:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered disabled state
device virbr0-nic entered promiscuous mode
virbr0: port 1(virbr0-nic) entered blocking state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
fuse init (API version 7.24)
perf: interrupt took too long (2505 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3163 > 3131), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3959 > 3953), lowering kernel.perf_event_max_sample_rate to 50000
perf: interrupt took too long (4974 > 4948), lowering kernel.perf_event_max_sample_rate to 40000
perf: interrupt took too long (6280 > 6217), lowering kernel.perf_event_max_sample_rate to 31000
perf: interrupt took too long (7857 > 7850), lowering kernel.perf_event_max_sample_rate to 25000
perf: interrupt took too long (9844 > 9821), lowering kernel.perf_event_max_sample_rate to 20000
perf: interrupt took too long (12339 > 12305), lowering kernel.perf_event_max_sample_rate to 16000

Return To JN20 System Information