dmesg - ztest1-20160804
microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.16-server-1.mga5 (iurt@rabbit.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Tue Jul 26 10:30:05 UTC 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bf369fff] usable
BIOS-e820: [mem 0x00000000bf36a000-0x00000000bf370fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf371000-0x00000000bfe62fff] usable
BIOS-e820: [mem 0x00000000bfe63000-0x00000000c036efff] reserved
BIOS-e820: [mem 0x00000000c036f000-0x00000000d6333fff] usable
BIOS-e820: [mem 0x00000000d6334000-0x00000000d63c5fff] reserved
BIOS-e820: [mem 0x00000000d63c6000-0x00000000d642cfff] usable
BIOS-e820: [mem 0x00000000d642d000-0x00000000d656ffff] ACPI NVS
BIOS-e820: [mem 0x00000000d6570000-0x00000000d9ffefff] reserved
BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Gigabyte Technology Co., Ltd. Z97-D3H/Z97-D3H-CF, BIOS F9 09/18/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DC000000 mask 7FFC000000 uncachable
4 base 00DB000000 mask 7FFF000000 uncachable
5 base 041FE00000 mask 7FFFE00000 uncachable
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6d0-0x000fd6df] mapped at [ffff8800000fd6d0]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01f60000, 0x01f60fff] PGTABLE
BRK [0x01f61000, 0x01f61fff] PGTABLE
BRK [0x01f62000, 0x01f62fff] PGTABLE
BRK [0x01f63000, 0x01f63fff] PGTABLE
BRK [0x01f64000, 0x01f64fff] PGTABLE
BRK [0x01f65000, 0x01f65fff] PGTABLE
RAMDISK: [mem 0x378da000-0x37feffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D6535078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D6545AD8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D6535188 01094D (v02 ALASKA A M I 00000088 INTL 20120711)
ACPI: FACS 0x00000000D656E080 000040
ACPI: APIC 0x00000000D6545BE8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D6545C80 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000D6545CC8 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000D65468B8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D6546DF8 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: MCFG 0x00000000D6547970 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000D65479B0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D65479E8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000D6547D58 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
NODE_DATA(0) allocated [mem 0x41fdf6000-0x41fdf9fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000bf369fff]
node 0: [mem 0x00000000bf371000-0x00000000bfe62fff]
node 0: [mem 0x00000000c036f000-0x00000000d6333fff]
node 0: [mem 0x00000000d63c6000-0x00000000d642cfff]
node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
node 0: [mem 0x0000000100000000-0x000000041fdfffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
On node 0 totalpages: 4152357
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13627 pages used for memmap
DMA32 zone: 872073 pages, LIFO batch:31
Normal zone: 51192 pages used for memmap
Normal zone: 3276288 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xdb200000-0xdf1fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbf36a000-0xbf370fff]
PM: Registered nosave memory: [mem 0xbfe63000-0xc036efff]
PM: Registered nosave memory: [mem 0xd6334000-0xd63c5fff]
PM: Registered nosave memory: [mem 0xd642d000-0xd656ffff]
PM: Registered nosave memory: [mem 0xd6570000-0xd9ffefff]
PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88041fa00000 s96664 r8192 d30312 u262144
pcpu-alloc: s96664 r8192 d30312 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4087453
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16256776K/16609428K available (7055K kernel code, 1232K rwdata, 3556K rodata, 1336K init, 844K bss, 352652K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 4000.033 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 8000.06 BogoMIPS (lpj=40000330)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
TOMOYO Linux initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81e84000 - ffffffff81e8b000)
ftrace: allocating 27396 entries in 108 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
#2
microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
#3
microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (64000.52 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbf36a000-0xbf370fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xd642d000-0xd656ffff] (1323008 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
xor: automatically using best checksumming function:
avx : 57624.400 MB/sec
pinctrl core: initialized pinctrl subsystem
RTC time: 5:26:43, date: 08/04/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
raid6: sse2x1 gen() 13618 MB/s
raid6: sse2x1 xor() 10632 MB/s
raid6: sse2x2 gen() 17082 MB/s
raid6: sse2x2 xor() 11734 MB/s
raid6: sse2x4 gen() 19949 MB/s
raid6: sse2x4 xor() 14020 MB/s
raid6: avx2x1 gen() 26632 MB/s
raid6: avx2x2 gen() 30675 MB/s
raid6: avx2x4 gen() 35900 MB/s
raid6: using algorithm avx2x4 gen() 35900 MB/s
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 15 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040D1F1C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040D231000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040D1E5E00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit]
pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7c3d000-0xf7c3d00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7c3c000-0xf7c3cfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3a000-0xf7c3a3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7c39000-0xf7c397ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7c38000-0xf7c380ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:244e] type 01 class 0x060401
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02-03]
pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs *4 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *4 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbf36a000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbfe63000-0xbfffffff]
e820: reserve RAM buffer [mem 0xd6334000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd642d000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:00:1c.3: PCI bridge to [bus 02-03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7256K (ffff8800378da000 - ffff880037ff0000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd2334000-0xd6334000] (64MB) mapped at [ffff8800d2334000-ffff8800d6333fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1470288403.920:1): initialized
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001c00000, using 1875k, total 65472k
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4.1 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7c39000 port 0xf7c39100 irq 24
ata2: SATA max UDMA/133 abar m2048@0xf7c39000 port 0xf7c39180 irq 24
ata3: SATA max UDMA/133 abar m2048@0xf7c39000 port 0xf7c39200 irq 24
ata4: SATA max UDMA/133 abar m2048@0xf7c39000 port 0xf7c39280 irq 24
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xf7c39000 port 0xf7c39380 irq 24
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
Key type dns_resolver registered
mpls_gso: MPLS GSO support
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
Btrfs loaded
Magic number: 12:214:415
rtc_cmos 00:02: setting system clock to 2016-08-04 05:26:45 UTC (1470288405)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-10: Corsair Force LS SSD, S9FM02.6, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Corsair Force LS 02.6 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
ata2.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: ATAPI: TSSTcorp CDDVDW SH-224FB, SB00, max UDMA/100
ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata6.00: configured for UDMA/100
ata3.00: ATA-7: SAMSUNG HD322HJ, 1AG01118, max UDMA7
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1118 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1118 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224FB SB00 PQ: 0 ANSI: 5
sdb: sdb1 sdb5 sdb7 sdb8 sdb9
sd 1:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 >
sd 2:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 sdd9 >
sd 3:0:0:0: [sdd] Attached SCSI disk
Freeing unused kernel memory: 1336K (ffffffff81d36000 - ffffffff81e84000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1124K (ffff8800016e7000 - ffff880001800000)
Freeing unused kernel memory: 540K (ffff880001b79000 - ffff880001c00000)
dracut: dracut-038
random: systemd-udevd urandom read with 28 bits of entropy available
[drm] Initialized drm 1.1.0 20060810
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 3ff0000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:16: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
tsc: Refined TSC clocksource calibration: 3999.998 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7350b79871d, max_idle_ns: 881591110622 ns
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 210x65
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
dracut: Starting plymouth daemon
clocksource: Switched to clocksource tsc
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3b000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.16-server-1.mga5 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3a000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.16-server-1.mga5 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.16-server-1.mga5 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.16-server-1.mga5 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-5: new low-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=8009
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8001
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-5: New USB device found, idVendor=046d, idProduct=c077
usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-5: Product: USB Optical Mouse
usb 3-5: Manufacturer: Logitech
usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C077.0001/input/input5
hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
usb 3-6: new high-speed USB device number 3 using xhci_hcd
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
dracut: Mounted root filesystem /dev/sda1
dracut: Mounting /usr with -o defaults,noatime,discard
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: discard
dracut: Switching root
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
NET: Registered protocol family 10
usb 3-6: New USB device found, idVendor=0bda, idProduct=8178
usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-6: Product: USB WLAN
usb 3-6: Manufacturer: Realtek
usb 3-6: SerialNumber: 00e04c000001
random: nonblocking pool is initialized
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
it87: Found IT8603E chip at 0xa30, revision 4
it87: Beeping is supported
EXT4-fs (sda5): re-mounted. Opts: discard
EXT4-fs (sda1): re-mounted. Opts: discard
usb 3-7: new high-speed USB device number 4 using xhci_hcd
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Non-volatile memory driver v1.3
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 3-7: string descriptor 0 read error: -71
usb 3-7: New USB device found, idVendor=058f, idProduct=6362
usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard
md: bind
systemd-journald[526]: Received request to flush runtime journal from PID 1
md: bind
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
md: bind
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
usb-storage 3-7:1.0: USB Mass Storage device detected
scsi host6: usb-storage 3-7:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
md: bind
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:aa:14:0b:e7:bb
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
md: bind
md: bind
md: bind
md: bind
md: raid1 personality registered for level 1
md/raid1:md126: active with 2 out of 2 mirrors
md/raid1:md124: active with 2 out of 2 mirrors
md/raid1:md127: active with 2 out of 2 mirrors
md124: detected capacity change from 0 to 20947402752
md127: detected capacity change from 0 to 7330856960
md126: detected capacity change from 0 to 20947533824
snd_hda_codec_realtek hdaudioC1D2: ALC1150: SKU not ready 0x00000000
md: raid0 personality registered for level 0
md/raid0:md125: md_size is 1023975680 sectors.
md: RAID0 configuration for md125 - 1 zone
md: zone0=[sdc7/sdd7]
zone-offset= 0KB, device-offset= 0KB, size= 511987840KB
md125: detected capacity change from 0 to 524275548160
snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC1D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D2: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D2: inputs:
snd_hda_codec_realtek hdaudioC1D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D2: Line=0x1a
md: bind
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
e1000e 0000:00:19.0 eno1: renamed from eth0
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
md: bind
md/raid1:md123: active with 2 out of 2 mirrors
md123: detected capacity change from 0 to 7610368000
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md126): mounted filesystem with ordered data mode. Opts: (null)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
rtl8192cu: Chip version 0x11
scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 6:0:0:0: [sde] Attached SCSI removable disk
rtl8192cu: MAC address: 30:b5:c2:19:50:85
rtl8192cu: Board Type 0
rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 6:0:0:1: [sdf] Attached SCSI removable disk
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
usbcore: registered new interface driver rtl8192cu
sd 6:0:0:2: [sdg] Attached SCSI removable disk
sd 6:0:0:3: [sdh] Attached SCSI removable disk
EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
rtl8192cu 3-6:1.0 wlp0s20u6: renamed from wlan0
cfg80211: Regulatory domain changed to country: FR
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md125): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md124): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (md123): mounted filesystem with ordered data mode. Opts: (null)
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
IPv6: ADDRCONF(NETDEV_UP): wlp0s20u6: link is not ready
rtl8192cu: MAC auto ON okay!
rtl8192cu: Tx queue select: 0x05
IPv6: ADDRCONF(NETDEV_UP): wlp0s20u6: link is not ready
NET: Registered protocol family 17
wlp0s20u6: authenticate with 00:15:56:0d:e6:b5
wlp0s20u6: send auth to 00:15:56:0d:e6:b5 (try 1/3)
wlp0s20u6: authenticated
wlp0s20u6: associate with 00:15:56:0d:e6:b5 (try 1/3)
wlp0s20u6: RX AssocResp from 00:15:56:0d:e6:b5 (capab=0x431 status=0 aid=5)
wlp0s20u6: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u6: link becomes ready
cfg80211: Regulatory domain changed to country: FR
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
IPv4: martian source 192.168.1.23 from 192.168.1.23, on dev eno1
ll header: 00000000: ff ff ff ff ff ff 30 b5 c2 19 50 85 08 06 ......0...P...
IPv4: martian source 192.168.1.11 from 192.168.1.11, on dev wlp0s20u6
ll header: 00000000: ff ff ff ff ff ff fc aa 14 0b e7 bb 08 06 ..............
IPv4: martian source 255.255.255.255 from 192.168.1.43, on dev wlp0s20u6
ll header: 00000000: ff ff ff ff ff ff e8 e0 b7 31 55 6b 08 00 .........1Uk..
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
device eno1 entered promiscuous mode
NFSD: starting 90-second grace period (net ffffffff81cf1e40)
IPv4: martian source 192.168.1.255 from 192.168.1.11, on dev eno1
ll header: 00000000: ff ff ff ff ff ff 30 b5 c2 19 50 85 08 00 ......0...P...
IPv4: martian source 192.168.1.255 from 192.168.1.23, on dev eno1
ll header: 00000000: ff ff ff ff ff ff 30 b5 c2 19 50 85 08 00 ......0...P...
IPv4: martian source 192.168.1.255 from 192.168.1.11, on dev eno1
ll header: 00000000: ff ff ff ff ff ff 30 b5 c2 19 50 85 08 00 ......0...P...
IPv4: martian source 192.168.1.255 from 192.168.1.23, on dev eno1
ll header: 00000000: ff ff ff ff ff ff 30 b5 c2 19 50 85 08 00 ......0...P...
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
ip_set: protocol 6
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
IPv4: martian source 255.255.255.255 from 192.168.1.11, on dev wlp0s20u6
ll header: 00000000: ff ff ff ff ff ff fc aa 14 0b e7 bb 08 00 ..............
xt_CT: No such helper "netbios-ns"
xt_CT: No such helper "irc"
xt_CT: No such helper "irc-0"
xt_CT: No such helper "snmp"
xt_CT: No such helper "pptp"
xt_addrtype: ipv6 does not support BROADCAST matching
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
Guest personality initialized and is inactive
VMCI host device registered (name=vmci, major=10, minor=55)
Initialized host personality
NET: Registered protocol family 40
fuse init (API version 7.23)
ppdev: user-space parallel port driver
/dev/vmmon[6740]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6740]: Using tsc_khz as TSC frequency: 3999998
/dev/vmmon[6740]: Module vmmon: initialized
/dev/vmnet: open called by PID 6830 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eno1: up
bridge-eno1: attached
bridge-eno1: disabling the bridge
bridge-eno1: down
bridge-eno1: detached
/dev/vmnet: open called by PID 6830 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlp0s20u6: device is wireless, enabling SMAC
bridge-wlp0s20u6: up
bridge-wlp0s20u6: attached
/dev/vmnet: open called by PID 6838 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6841 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 6860 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
userif-4: sent link down event.
userif-4: sent link up event.
/dev/vmnet: open called by PID 6862 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6866 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmmon[9999]: PTSC: initialized at 4400000000 Hz using TSC, TSCs are synchronized.
/dev/vmmon[9999]: Monitor IPI vector: ff
/dev/vmmon[9999]: HV IPI vector: f2
/dev/vmnet: open called by PID 10068 (vmx-vcpu-0)
/dev/vmnet: port on hub 0 successfully opened
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd
usb 3-7: reset high-speed USB device number 4 using xhci_hcd