dmesg - EXT4

Return To EXT4 System Information

Linux version 4.7.0-040700-generic (kernel@tangerine) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1) ) #201608011546 SMP Mon Aug 1 19:48:41 UTC 2016
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008979bfff] usable
BIOS-e820: [mem 0x000000008979c000-0x000000008979cfff] ACPI NVS
BIOS-e820: [mem 0x000000008979d000-0x00000000897e6fff] reserved
BIOS-e820: [mem 0x00000000897e7000-0x000000008e659fff] usable
BIOS-e820: [mem 0x000000008e65a000-0x000000008e968fff] reserved
BIOS-e820: [mem 0x000000008e969000-0x000000008eb72fff] usable
BIOS-e820: [mem 0x000000008eb73000-0x000000008f2cefff] ACPI NVS
BIOS-e820: [mem 0x000000008f2cf000-0x000000008fb8ffff] reserved
BIOS-e820: [mem 0x000000008fb90000-0x000000008fbfefff] type 20
BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ESRT=0x8fa56e98  ACPI=0x8f289000  ACPI 2.0=0x8f289000  SMBIOS=0xf05e0  MPS=0xfca00 
esrt: Reserving ESRT space from 0x000000008fa56e98 to 0x000000008fa56ed0.
SMBIOS 3.0 present.
DMI: MSI MS-7998/C236A WORKSTATION (MS-7998), BIOS 2.20 02/22/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x46f000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 00C0000000 mask 7FC0000000 uncachable
  1 base 00A0000000 mask 7FE0000000 uncachable
  2 base 0090000000 mask 7FF0000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcce0-0x000fccef] mapped at [ffff8800000fcce0]
Base memory trampoline at [ffff880000090000] 90000 size 24576
Using GB pages for direct mapping
BRK [0x02158000, 0x02158fff] PGTABLE
BRK [0x02159000, 0x02159fff] PGTABLE
BRK [0x0215a000, 0x0215afff] PGTABLE
BRK [0x0215b000, 0x0215bfff] PGTABLE
BRK [0x0215c000, 0x0215cfff] PGTABLE
BRK [0x0215d000, 0x0215dfff] PGTABLE
RAMDISK: [mem 0x33936000-0x35c92fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000008F289000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000008F289098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000008F2ACD00 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000008F2891E8 023B16 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x000000008F2CEF80 000040
ACPI: APIC 0x000000008F2ACE10 0000BC (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000008F2ACED0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000008F2ACF18 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000008F2ACFB8 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: HPET 0x000000008F2ACFF8 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
ACPI: SSDT 0x000000008F2AD030 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
ACPI: LPIT 0x000000008F2AD3A0 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008F2AD438 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
ACPI: SSDT 0x000000008F2AD680 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
ACPI: SSDT 0x000000008F2B0230 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
ACPI: DBGP 0x000000008F2B0E18 000034 (v01 INTEL           00000000 MSFT 0000005F)
ACPI: DBG2 0x000000008F2B0E50 000054 (v00 INTEL           00000000 MSFT 0000005F)
ACPI: SSDT 0x000000008F2B0EA8 000621 (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
ACPI: SSDT 0x000000008F2B14D0 0054A2 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
ACPI: UEFI 0x000000008F2B6978 000042 (v01                 00000000      00000000)
ACPI: SSDT 0x000000008F2B69C0 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
ACPI: BGRT 0x000000008F2B7838 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000046effffff]
NODE_DATA(0) allocated [mem 0x46eff7000-0x46effbfff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000046effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000057fff]
  node   0: [mem 0x0000000000059000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x000000008979bfff]
  node   0: [mem 0x00000000897e7000-0x000000008e659fff]
  node   0: [mem 0x000000008e969000-0x000000008eb72fff]
  node   0: [mem 0x000000008fbff000-0x000000008fbfffff]
  node   0: [mem 0x0000000100000000-0x000000046effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000046effffff]
On node 0 totalpages: 4183991
  DMA zone: 64 pages used for memmap
  DMA zone: 48 pages reserved
  DMA zone: 3997 pages, LIFO batch:0
  DMA32 zone: 9057 pages used for memmap
  DMA32 zone: 579610 pages, LIFO batch:31
  Normal zone: 56256 pages used for memmap
  Normal zone: 3600384 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8979c000-0x8979cfff]
PM: Registered nosave memory: [mem 0x8979d000-0x897e6fff]
PM: Registered nosave memory: [mem 0x8e65a000-0x8e968fff]
PM: Registered nosave memory: [mem 0x8eb73000-0x8f2cefff]
PM: Registered nosave memory: [mem 0x8f2cf000-0x8fb8ffff]
PM: Registered nosave memory: [mem 0x8fb90000-0x8fbfefff]
PM: Registered nosave memory: [mem 0x8fc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x8fc00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 33 pages/cpu @ffff88046ec00000 s98264 r8192 d28712 u262144
pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4118566
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16274044K/16735964K available (6081K kernel code, 1100K rwdata, 2772K rodata, 1356K init, 928K bss, 461920K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:2048 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 2 loops
tsc: Detected 3695.917 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7391.83 BogoMIPS (lpj=14783668)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160422
ACPI Error: [\_SB_.PCI0.XHC_.RHUB.SS07] Namespace lookup failure, AE_NOT_FOUND (20160422/dswload-210)
ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20160422/psobject-227)
ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20160422/tbxfload-227)
ACPI Error: 1 table load failures, 7 successful (20160422/tbxfload-247)
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81c68000 - ffffffff81c6e000)
ftrace: allocating 25080 entries in 98 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1280 v5 @ 3.70GHz (family: 0x6, model: 0x5e, stepping: 0x3)
Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
... version:                4
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (59141.12 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x8979c000-0x8979cfff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x8eb73000-0x8f2cefff] (7716864 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 25 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BFB3000 000747 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BFBB000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045BFC6800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88045B89DE00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xdf352000-0xdf352fff 64bit]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xdf330000-0xdf33ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xdf351000-0xdf351fff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xdf350000-0xdf350fff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xdf34f000-0xdf34ffff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xdf34e000-0xdf34efff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xdf348000-0xdf349fff]
pci 0000:00:17.0: reg 0x14: [mem 0xdf34d000-0xdf34d0ff]
pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:17.0: reg 0x24: [mem 0xdf34c000-0xdf34c7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xdf34b000-0xdf34bfff 64bit]
pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xdf344000-0xdf347fff]
pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
pci 0000:00:1f.3: reg 0x10: [mem 0xdf340000-0xdf343fff 64bit]
pci 0000:00:1f.3: reg 0x20: [mem 0xdf320000-0xdf32ffff 64bit]
pci 0000:00:1f.3: PME# supported from D3hot D3cold
pci 0000:00:1f.3: System wakeup disabled by ACPI
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xdf34a000-0xdf34a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
pci 0000:00:1f.6: reg 0x10: [mem 0xdf300000-0xdf31ffff]
pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.6: System wakeup disabled by ACPI
pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:02:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit]
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:03:00.0: [144d:a802] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xdf110000-0xdf113fff 64bit]
pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xdf100000-0xdf10ffff pref]
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
e820: reserve RAM buffer [mem 0x8979c000-0x8bffffff]
e820: reserve RAM buffer [mem 0x8e65a000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8eb73000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io  0x0a00-0x0a0f] has been reserved
system 00:00: [io  0x0a10-0x0a1f] has been reserved
system 00:00: [io  0x0a20-0x0a2f] has been reserved
system 00:00: [io  0x0a30-0x0a3f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x1800-0x18fe] has been reserved
system 00:05: [io  0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io  0x0800-0x087f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io  0x1854-0x1857] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] has been reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xdffc0000-0xdffdffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:0a: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:0a: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:0a: [mem 0xfe000000-0xfe01ffff] could not be reserved
system 00:0a: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:0a: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [io  0xff00-0xfffe] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:01.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf2fffff]
pci 0000:00:1d.0: PCI bridge to [bus 03]
pci 0000:00:1d.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf2fffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xdf100000-0xdf1fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 36212K (ffff880033936000 - ffff880035c93000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x853de000-0x893de000] (64MB) mapped at [ffff8800853de000-ffff8800893ddfff]
simple-framebuffer simple-framebuffer.0: framebuffer at 0xd1000000, 0x500000 bytes, mapped to 0xffffc90002000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1280x1024x32, linelength=5120
Console: switching to colour frame buffer device 160x64
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1470227031.464:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=37 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x142120
intel_idle: v0.4.1 model 0x5E
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
intel_pstate: HWP enabled
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x7c
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x7c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha512) (pkcs1pad(rsa-generic,sha512))
Loaded X.509 cert 'Build time autogenerated kernel key: 0f3d07b98a66a6364d758f0c82a37db3d1a4467f'
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:07: setting system clock to 2016-08-03 12:23:51 UTC (1470227031)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81b15000 - ffffffff81c68000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 48K (ffff8800019f4000 - ffff880001a00000)
Freeing unused kernel memory: 1324K (ffff880001cb5000 - ffff880001e00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd urandom read with 3 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
wmi: Mapper loaded
hidraw: raw HID events driver (C) Jiri Kosina
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
[drm] Initialized drm 1.1.0 20060810
nvme nvme0: pci function 0000:03:00.0
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.7.0-040700-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ACPI Error: [GPLD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS11._PLD] (Node ffff88045bfc2410), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [GPLD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS12._PLD] (Node ffff88045bfc21b8), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [GPLD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS13._PLD] (Node ffff88045bfc2b90), AE_NOT_FOUND (20160422/psparse-542)
ACPI Error: [GPLD] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS14._PLD] (Node ffff88045bfc20a0), AE_NOT_FOUND (20160422/psparse-542)
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.7.0-040700-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
MXM: GUID detected in BIOS
checking generic (d1000000 500000) vs hw (c0000000 10000000)
checking generic (d1000000 500000) vs hw (d0000000 2000000)
fb: switching to nouveaufb from simple
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: unknown chipset (134000a1)
nouveau: probe of 0000:01:00.0 failed with error -12
ahci 0000:00:17.0: version 3.0
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.7.0-040700-generic xhci-hcd
usb usb3: SerialNumber: 0000:02:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:02:00.0: xHCI Host Controller
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.7.0-040700-generic xhci-hcd
usb usb4: SerialNumber: 0000:02:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
 nvme0n1: p1 p2 p3 p4
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c100 irq 315
ata2: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c180 irq 315
ata3: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c200 irq 315
ata4: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c280 irq 315
ata5: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c300 irq 315
ata6: SATA max UDMA/133 abar m2048@0xdf34c000 port 0xdf34c380 irq 315
e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
usb 1-14: new high-speed USB device number 2 using xhci_hcd
usb 1-14: New USB device found, idVendor=1a40, idProduct=0101
usb 1-14: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-14: Product: USB 2.0 Hub
hub 1-14:1.0: USB hub found
hub 1-14:1.0: 4 ports detected
ata6: SATA link down (SStatus 4 SControl 300)
ata2: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata5: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1: SATA link down (SStatus 4 SControl 300)
e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
tsc: Refined TSC clocksource calibration: 3695.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns
usb 1-14.4: new high-speed USB device number 3 using xhci_hcd
e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 88:88:88:88:87:88
e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
raid6: sse2x1   gen() 13700 MB/s
raid6: sse2x1   xor()  9436 MB/s
raid6: sse2x2   gen() 16994 MB/s
raid6: sse2x2   xor() 11753 MB/s
raid6: sse2x4   gen() 17697 MB/s
raid6: sse2x4   xor() 13552 MB/s
raid6: avx2x1   gen() 27058 MB/s
raid6: avx2x2   gen() 31598 MB/s
raid6: avx2x4   gen() 32101 MB/s
raid6: using algorithm avx2x4 gen() 32101 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
usb 1-14.4: New USB device found, idVendor=2109, idProduct=2811
usb 1-14.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-14.4: Product: USB2.0 Hub             
usb 1-14.4: Manufacturer: VIA Labs, Inc.         
hub 1-14.4:1.0: USB hub found
hub 1-14.4:1.0: 4 ports detected
   avx       : 33184.000 MB/sec
Btrfs loaded, crc32c=crc32c-intel
BTRFS: selftest: sectorsize: 4096  nodesize: 4096
BTRFS: selftest: sectorsize: 4096  nodesize: 8192
BTRFS: selftest: sectorsize: 4096  nodesize: 16384
BTRFS: selftest: sectorsize: 4096  nodesize: 32768
BTRFS: selftest: sectorsize: 4096  nodesize: 65536
usb 1-14.4.3: new full-speed USB device number 4 using xhci_hcd
clocksource: Switched to clocksource tsc
EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
usb 1-14.4.3: New USB device found, idVendor=1532, idProduct=0043
usb 1-14.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-14.4.3: Product: Razer DeathAdder Chroma
usb 1-14.4.3: Manufacturer: Razer
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Reached target Slices.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Starting Journal Service...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
systemd[1]: ureadahead.service: Unit entered failed state.
systemd[1]: ureadahead.service: Failed with result 'exit-code'.
ppdev: user-space parallel port driver
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
parport_pc 00:01: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
systemd[1]: Started Journal Service.
EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
usb 1-14.4.4: new low-speed USB device number 5 using xhci_hcd
systemd-journald[974]: Received request to flush runtime journal from PID 1
lp0: using parport0 (interrupt-driven).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
EFI Variables Facility v0.08 2004-May-17
RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
RAPL PMU: hw unit of domain psys 2^-14 Joules
intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
idma64 idma64.0: Found Intel integrated DMA 64-bit
pstore: Registered efi as persistent store backend
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol BCM registered
Bluetooth: HCI UART protocol QCA registered
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
idma64 idma64.1: Found Intel integrated DMA 64-bit
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
Adding 7999484k swap on /dev/nvme0n1p3.  Priority:-1 extents:1 across:7999484k SSFS
intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
idma64 idma64.2: Found Intel integrated DMA 64-bit
dw-apb-uart.2: ttyS2 at MMIO 0xdf34b000 (irq = 20, base_baud = 115200) is a 16550A
usb 1-14.4.4: New USB device found, idVendor=04f2, idProduct=0833
usb 1-14.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-14.4.4: Product: USB Keyboard
usb 1-14.4.4: Manufacturer: CHICONY
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
mei_me 0000:00:16.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
random: nonblocking pool is initialized
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.4/1-14.4.3/1-14.4.3:1.0/0003:1532:0043.0001/input/input15
hid-generic 0003:1532:0043.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14.4.3/input0
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.4/1-14.4.3/1-14.4.3:1.1/0003:1532:0043.0002/input/input16
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
audit: type=1400 audit(1470227033.760:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/snapd/snap-confine" pid=2437 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ippusbxd" pid=2440 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:4): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=2438 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=2433 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2433 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2433 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=2433 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=2442 comm="apparmor_parser"
audit: type=1400 audit(1470227033.760:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=2432 comm="apparmor_parser"
hid-generic 0003:1532:0043.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14.4.3/input1
input: Razer Razer DeathAdder Chroma as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.4/1-14.4.3/1-14.4.3:1.2/0003:1532:0043.0003/input/input17
hid-generic 0003:1532:0043.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer DeathAdder Chroma] on usb-0000:00:14.0-14.4.3/input2
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.4/1-14.4.4/1-14.4.4:1.0/0003:04F2:0833.0004/input/input18
hid-generic 0003:04F2:0833.0004: input,hidraw3: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-14.4.4/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14.4/1-14.4.4/1-14.4.4:1.1/0003:04F2:0833.0005/input/input19
hid-generic 0003:04F2:0833.0005: input,hiddev0,hidraw4: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-14.4.4/input1
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input22
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
fuse init (API version 7.25)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
systemd[1]: snapd.refresh.timer: Adding 3h 17min 18.692543s random time.
systemd[1]: snapd.refresh.timer: Adding 51min 52.933477s random time.
systemd[1]: snapd.refresh.timer: Adding 3h 33min 9.097968s random time.
systemd[1]: snapd.refresh.timer: Adding 3h 22min 26.613340s random time.
EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)

Return To EXT4 System Information