dmesg - neokylin-compression
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.13-100.nd7.1.x86_64 (mockbuild@kojibuilder6) (gcc version 4.9.2 20141101 (NeoKylin 4.9.2-1) (GCC) ) #1 SMP Fri Jan 15 20:03:38 CST 2016
Command line: BOOT_IMAGE=/boot/vmlinuz-4.1.13-100.nd7.1.x86_64 root=/dev/sda3 ro rhgb quiet loglevel=0
Disabled fast string operations
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007a19efff] usable
BIOS-e820: [mem 0x000000007a19f000-0x000000007a69efff] reserved
BIOS-e820: [mem 0x000000007a69f000-0x000000007a79efff] ACPI NVS
BIOS-e820: [mem 0x000000007a79f000-0x000000007a7fefff] ACPI data
BIOS-e820: [mem 0x000000007a7ff000-0x000000007a7fffff] usable
BIOS-e820: [mem 0x000000007a800000-0x000000007f1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe800000-0x00000000fe80ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: LENOVO 1141A86/1141A86, BIOS 8HET41WW(1.23) 01/13/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 07C000000 mask FFC000000 uncachable
3 base 07B000000 mask FFF000000 uncachable
4 base 07A800000 mask FFF800000 uncachable
5 base 100000000 mask FE0000000 write-back
6 base 110000000 mask FF0000000 uncachable
7 base 108000000 mask FF8000000 uncachable
8 base 104000000 mask FFC000000 uncachable
9 base 102000000 mask FFE000000 uncachable
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: last_pfn = 0x7a800 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000097000] 97000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02051000, 0x02051fff] PGTABLE
BRK [0x02052000, 0x02052fff] PGTABLE
BRK [0x02053000, 0x02053fff] PGTABLE
init_memory_mapping: [mem 0x100400000-0x1005fffff]
[mem 0x100400000-0x1005fffff] page 2M
BRK [0x02054000, 0x02054fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x1003fffff]
[mem 0x100000000-0x1003fffff] page 2M
init_memory_mapping: [mem 0x60000000-0x7a19efff]
[mem 0x60000000-0x79ffffff] page 2M
[mem 0x7a000000-0x7a19efff] page 4k
BRK [0x02055000, 0x02055fff] PGTABLE
BRK [0x02056000, 0x02056fff] PGTABLE
init_memory_mapping: [mem 0x7a7ff000-0x7a7fffff]
[mem 0x7a7ff000-0x7a7fffff] page 4k
init_memory_mapping: [mem 0x40000000-0x5fffffff]
[mem 0x40000000-0x5fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F00E0 000024 (v02 LENOVO)
ACPI: XSDT 0x000000007A7FE120 0000AC (v01 LENOVO TP-8H 00000123 PTEC 00000002)
ACPI: FACP 0x000000007A7EC000 0000F4 (v03 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: DSDT 0x000000007A7EF000 009B1D (v01 LENOVO TP-8H 00000123 INTL 20061109)
ACPI: FACS 0x000000007A735000 000040
ACPI: FACS 0x000000007A735000 000040
ACPI: SLIC 0x000000007A7FD000 000176 (v01 LENOVO TP-8H 00000123 PTEC 00000001)
ACPI: SSDT 0x000000007A7FC000 000A1F (v01 LENOVO SataSec 00001000 INTL 20061109)
ACPI: SSDT 0x000000007A7FB000 0008C6 (v01 LENOVO SataPri 00001000 INTL 20061109)
ACPI: SSDT 0x000000007A7FA000 00078A (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: SSDT 0x000000007A7F9000 0001F9 (v01 LENOVO PtidDevc 00001000 INTL 20061109)
ACPI: ASF! 0x000000007A7EE000 0000A5 (v32 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: HPET 0x000000007A7EB000 000038 (v01 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: APIC 0x000000007A7EA000 000098 (v01 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: MCFG 0x000000007A7E9000 00003C (v01 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: SSDT 0x000000007A7E8000 00073E (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 0x000000007A7E7000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 0x000000007A7E6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 0x000000007A7E5000 00003E (v01 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: SSDT 0x000000007A7E4000 000DD3 (v01 SgRef SgTabl 00001000 INTL 20061109)
ACPI: SSDT 0x000000007A7E3000 000A01 (v01 AmdRef AmdTabl 00001000 INTL 20061109)
ACPI: UEFI 0x000000007A7E2000 00026A (v01 LENOVO TP-8H 00000123 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
NODE_DATA(0) allocated [mem 0x1005eb000-0x1005fefff]
[ffffea0000000000-ffffea00041fffff] PMD -> [ffff880077a00000-ffff880079bfffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001005fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x000000007a19efff]
node 0: [mem 0x000000007a7ff000-0x000000007a7fffff]
node 0: [mem 0x0000000100000000-0x00000001005fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001005fffff]
On node 0 totalpages: 501564
DMA zone: 64 pages used for memmap
DMA zone: 156 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 7751 pages used for memmap
DMA32 zone: 496032 pages, LIFO batch:31
Normal zone: 24 pages used for memmap
Normal zone: 1536 pages, LIFO batch:0
Reserving Intel graphics stolen memory at 0x7b200000-0x7f1fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7a19f000-0x7a69efff]
PM: Registered nosave memory: [mem 0x7a69f000-0x7a79efff]
PM: Registered nosave memory: [mem 0x7a79f000-0x7a7fefff]
PM: Registered nosave memory: [mem 0x7a800000-0x7f1fffff]
PM: Registered nosave memory: [mem 0x7f200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfe7fffff]
PM: Registered nosave memory: [mem 0xfe800000-0xfe80ffff]
PM: Registered nosave memory: [mem 0xfe810000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0x7f200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff880100200000 s102360 r8192 d28712 u262144
pcpu-alloc: s102360 r8192 d28712 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 493569
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1.13-100.nd7.1.x86_64 root=/dev/sda3 ro rhgb quiet loglevel=0
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
Memory: 1886588K/2006256K available (7817K kernel code, 1318K rwdata, 3292K rodata, 1528K init, 1532K bss, 119668K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:65792 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.799 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.59 BogoMIPS (lpj=2294799)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81ec9000 - ffffffff81ed0000)
ftrace: allocating 28204 entries in 111 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Disabled fast string operations
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
Disabled fast string operations
#3
Disabled fast string operations
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (18358.39 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7a69f000-0x7a79efff] (1048576 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 10:17:11, date: 07/11/16
NET: Registered protocol family 16
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880079F73800 00067C (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880079F7D800 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880079FB2000 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x7f200000-0xfeafffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa2705000-0xa270500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xa270a000-0xa270a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xa2700000-0xa2703fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xa2709000-0xa27093ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7088-0x708f]
pci 0000:00:1f.2: reg 0x14: [io 0x7094-0x7097]
pci 0000:00:1f.2: reg 0x18: [io 0x7080-0x7087]
pci 0000:00:1f.2: reg 0x1c: [io 0x7090-0x7093]
pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f]
pci 0000:00:1f.2: reg 0x24: [mem 0xa2708000-0xa27087ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xa2704000-0xa27040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
pci 0000:01:00.0: [1002:6760] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xa2600000-0xa261ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0x6000-0x60ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xa2600000-0xa26fffff]
pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0x5000-0x50ff]
pci 0000:03:00.0: reg 0x18: [mem 0xa0404000-0xa0404fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xa0400000-0xa0403fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
pci 0000:04:00.0: [1180:e822] type 00 class 0x088001
pci 0000:04:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:04:00.0: reg 0x10: [mem 0xa1e00000-0xa1e000ff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04-08]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xa1e00000-0xa25fffff]
pci 0000:00:1c.2: bridge window [mem 0xa0500000-0xa0cfffff 64bit pref]
pci 0000:09:00.0: [10ec:8176] type 00 class 0x028000
pci 0000:09:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:09:00.0: reg 0x18: [mem 0xa1d00000-0xa1d03fff 64bit]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xa1d00000-0xa1dfffff]
pci 0000:00:1c.7: PCI bridge to [bus 0a-0e]
pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.7: bridge window [mem 0xa1500000-0xa1cfffff]
pci 0000:00:1c.7: bridge window [mem 0xa0d00000-0xa14fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x7a19f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a800000-0x7bffffff]
e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x06a4] has been reserved
system 00:00: [io 0x06a0] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] could not be reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs LEN0023 PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
system 00:07: [mem 0x40000000-0x401fffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xa2620000-0xa263ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xa2600000-0xa26fffff]
pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-08]
pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.2: bridge window [mem 0xa1e00000-0xa25fffff]
pci 0000:00:1c.2: bridge window [mem 0xa0500000-0xa0cfffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.3: bridge window [mem 0xa1d00000-0xa1dfffff]
pci 0000:00:1c.7: PCI bridge to [bus 0a-0e]
pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.7: bridge window [mem 0xa1500000-0xa1cfffff]
pci 0000:00:1c.7: bridge window [mem 0xa0d00000-0xa14fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x7f200000-0xfeafffff window]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xa2600000-0xa26fffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 2 [mem 0xa0400000-0xa04fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xa1e00000-0xa25fffff]
pci_bus 0000:04: resource 2 [mem 0xa0500000-0xa0cfffff 64bit pref]
pci_bus 0000:09: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:09: resource 1 [mem 0xa1d00000-0xa1dfffff]
pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:0a: resource 1 [mem 0xa1500000-0xa1cfffff]
pci_bus 0000:0a: resource 2 [mem 0xa0d00000-0xa14fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x73a00000-0x77a00000] (64MB) mapped at [ffff880073a00000-ffff8800779fffff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1468232231.538:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI Error: No handler for Region [ECRM] (ffff880079ee6090) [EmbeddedControl] (20150410/evregion-163)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20150410/exfldio-297)
ACPI Error: Method parse/execution failed [\_TZ_.RDEC] (Node ffff88010048b348), AE_NOT_EXIST (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_TZ_.TZS0._TMP] (Node ffff88010048b3c0), AE_NOT_EXIST (20150410/psparse-536)
ACPI Error: No handler for Region [ECRM] (ffff880079ee61f8) [EmbeddedControl] (20150410/evregion-163)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20150410/exfldio-297)
ACPI Error: Method parse/execution failed [\_TZ_.RDEC] (Node ffff88010048b348), AE_NOT_EXIST (20150410/psparse-536)
ACPI Error: Method parse/execution failed [\_TZ_.TZS0._TMP] (Node ffff88010048b3c0), AE_NOT_EXIST (20150410/psparse-536)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZS1] (35 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xa2708000 port 0xa2708100 irq 25
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xa2708000 port 0xa2708300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xa2708000 port 0xa2708380 irq 25
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xa270a000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.13-100.nd7.1.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2709000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.13-100.nd7.1.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 131e209e38607ae87e97a1d529c3a90b6a83ff28'
registered taskstats version 1
Magic number: 8:610:274
usb usb1-port2: hash matches
tty tty11: hash matches
rtc_cmos 00:02: setting system clock to 2016-07-11 10:17:12 UTC (1468232232)
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1.00: ATA-8: ST320LT020-9YG142, 0003LVM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST320LT020-9YG14 LVM1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
sd 0:0:0:0: [sda] Attached SCSI disk
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata5.00: ATAPI: Optiarc DVD RW AD-7740H, A841, max UDMA/100
ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7740H A841 PQ: 0 ANSI: 5
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.3: new low-speed USB device number 3 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5752], y [..4912]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400, board id: 1715, fw id: 758851
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 1-1.3: New USB device found, idVendor=17ef, idProduct=6016
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: ThinkPad USB Laser Mouse
usb 1-1.3: Manufacturer: Lenovo
input: Lenovo ThinkPad USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:17EF:6016.0001/input/input5
hid-generic 0003:17EF:6016.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo ThinkPad USB Laser Mouse] on usb-0000:00:1a.0-1.3/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
usb 1-1.5: new high-speed USB device number 4 using ehci-pci
usb 1-1.5: New USB device found, idVendor=5986, idProduct=03b3
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Integrated Camera
usb 1-1.5: Manufacturer: Ricoh Company Ltd.
tsc: Refined TSC clocksource calibration: 2294.786 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2113f7e44a7, max_idle_ns: 440795281465 ns
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
Switched to clocksource tsc
psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
devtmpfs: mounted
Freeing unused kernel memory: 1528K (ffffffff81d4b000 - ffffffff81ec9000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 364K (ffff8800017a5000 - ffff880001800000)
Freeing unused kernel memory: 804K (ffff880001b37000 - ffff880001c00000)
random: nonblocking pool is initialized
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit: type=1404 audit(1468232238.401:2): selinux=0 auid=4294967295 ses=4294967295
systemd[1]: RTC configured in localtime, applying delta of 480 minutes to system time.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd-readahead[127]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
EXT4-fs (sda3): re-mounted. Opts: (null)
systemd-journald[145]: Received request to flush runtime journal from PID 1
ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffc90000338000, f0:de:f1:da:a7:42, XID 0c200000 IRQ 26
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
thinkpad_acpi: ThinkPad ACPI Extras v0.25
thinkpad_acpi:
thinkpad_acpi: ThinkPad BIOS 8HET41WW(1.23), EC unknown
thinkpad_acpi: Lenovo ThinkPad E420, model 1141A86
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
cfg80211: Calling CRDA to update world regulatory domain
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing.
snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_conexant hdaudioC0D0: inputs:
snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23
snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b
snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[drm] radeon kernel modesetting enabled.
VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
radeon 0000:01:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x17AA:0x21E3).
[drm] register mmio base: 0xA2600000
[drm] register mmio size: 131072
ATOM BIOS: Lenovo
[drm] GPU not posted. posting now...
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 944656 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAICOS Microcode
sdhci-pci 0000:04:00.0: SDHCI controller found [1180:e822] (rev 7)
sdhci-pci 0000:04:00.0: No vmmc regulator found
sdhci-pci 0000:04:00.0: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
alg: No test for crc32 (crc32-pclmul)
rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880066506c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880066506c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001832118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
r8169 0000:03:00.0 enp3s0: renamed from eth0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
kvm: disabled by bios
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
radeon 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] fb mappable at 0x80475000
[drm] vram apper at 0x80000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
Console: switching to colour frame buffer device 128x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vga_switcheroo: enabled
ATPX version 1, functions 0x00000003
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
rtl8192ce 0000:09:00.0 wlp9s0: renamed from wlan0
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
acpi device:3d: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3b/LNXVIDEO:00/input/input11
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:49: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12
[drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 1
fbcon: inteldrmfb (fb1) is primary device
fbcon: Remapping primary device, fb1, to tty 1-63
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
cfg80211: Calling CRDA for country: CN
cfg80211: Regulatory domain changed to country: CN
cfg80211: DFS Master region: FCC
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Camera (5986:03b3)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
audit: type=1305 audit(1468203455.537:3): audit_pid=365 old=0 auid=4294967295 ses=4294967295 res=1
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2294786261 Hz
vboxdrv: Successfully loaded version 5.0.20 (interface 0x00240000)
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
r8169 0000:03:00.0 enp3s0: link down
r8169 0000:03:00.0 enp3s0: link down
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880066506c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880066506c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001832118
[drm] ring test on 0 succeeded in 2 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
r8169 0000:03:00.0 enp3s0: link up
[drm] ib test on ring 5 succeeded
fuse init (API version 7.23)
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
perf interrupt took too long (2515 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature above threshold, cpu clock throttled (total events = 2)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 2)
CPU3: Package temperature above threshold, cpu clock throttled (total events = 2)
CPU2: Package temperature above threshold, cpu clock throttled (total events = 2)
CPU0: Package temperature above threshold, cpu clock throttled (total events = 2)
CPU1: Package temperature above threshold, cpu clock throttled (total events = 2)
CPU1: Core temperature/speed normal
CPU0: Core temperature/speed normal
CPU0: Package temperature/speed normal
CPU1: Package temperature/speed normal
CPU3: Package temperature/speed normal
CPU2: Package temperature/speed normal
mce: [Hardware Error]: Machine check events logged