dmesg - amd-a6-8gb
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-24-generic (buildd@lgw01-12) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #43-Ubuntu SMP Wed Jun 8 19:27:37 UTC 2016 (Ubuntu 4.4.0-24.43-generic 4.4.10)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
tseg: 00dfc00000
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df9befff] usable
BIOS-e820: [mem 0x00000000df9bf000-0x00000000dfabefff] reserved
BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS
BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbf4fff] ACPI data
BIOS-e820: [mem 0x00000000dfbf5000-0x00000000dfbfffff] usable
BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001feffffff] usable
BIOS-e820: [mem 0x00000001ff000000-0x000000021effffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Pavilion g6 Notebook PC/3566, BIOS F.53 10/24/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x1ff000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFE0000000 write-back
3 base 00DFBBD000 mask FFFFFFF000 uncachable
4 base 00FFE00000 mask FFFFE00000 write-protect
5 disabled
6 disabled
7 disabled
TOM2: 000000021f000000 aka 8688M
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
Using GB pages for direct mapping
BRK [0x021ff000, 0x021fffff] PGTABLE
BRK [0x02200000, 0x02200fff] PGTABLE
BRK [0x02201000, 0x02201fff] PGTABLE
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
RAMDISK: [mem 0x33b38000-0x35d93fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
ACPI: XSDT 0x00000000DFBF4120 00007C (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 0x00000000DFBF3000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
ACPI: DSDT 0x00000000DFBDF000 00FE41 (v01 HP INSYDE F0000000 ACPI 00040000)
ACPI: FACS 0x00000000DFB76000 000040
ACPI: FACS 0x00000000DFB76000 000040
ACPI: HPET 0x00000000DFBF2000 000038 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: APIC 0x00000000DFBF1000 000084 (v02 HP INSYDE 00000001 ACPI 00040000)
ACPI: MCFG 0x00000000DFBF0000 00003C (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: ASF! 0x00000000DFBEF000 0000A5 (v32 HP INSYDE 00000001 ACPI 00040000)
ACPI: BOOT 0x00000000DFBDE000 000028 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: SLIC 0x00000000DFBDD000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000)
ACPI: WDRT 0x00000000DFBDC000 000047 (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: WDAT 0x00000000DFBDB000 0001AC (v01 HP INSYDE 00000001 ACPI 00040000)
ACPI: SSDT 0x00000000DFBDA000 000E28 (v01 HP INSYDE 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DFBD8000 00193D (v02 HP INSYDE 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001feffffff]
NODE_DATA(0) allocated [mem 0x1feff9000-0x1feffdfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000001feffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000df9befff]
node 0: [mem 0x00000000dfbf5000-0x00000000dfbfffff]
node 0: [mem 0x0000000100000000-0x00000001feffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000001feffffff]
On node 0 totalpages: 1960296
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 14248 pages used for memmap
DMA32 zone: 911818 pages, LIFO batch:31
Normal zone: 16320 pages used for memmap
Normal zone: 1044480 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdf9bf000-0xdfabefff]
PM: Registered nosave memory: [mem 0xdfabf000-0xdfbbefff]
PM: Registered nosave memory: [mem 0xdfbbf000-0xdfbf4fff]
PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff]
PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8801fec00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1929643
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7597728K/7841184K available (8361K kernel code, 1278K rwdata, 3920K rodata, 1480K init, 1292K bss, 243456K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1397.550 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2795.10 BogoMIPS (lpj=5590200)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 3 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 1024, 2MB 128, 4MB 64, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820b3000 - ffffffff820ba000)
ftrace: allocating 31907 entries in 125 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A6-3400M APU with Radeon(tm) HD Graphics (family: 0x12, model: 0x1, stepping: 0x0)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11180.40 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 5:50:30, date: 06/30/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff window] (conflicts with Video ROM [mem 0x000c0000-0x000cf1ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1705] type 00 class 0x060000
pci 0000:00:01.0: [1002:9647] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff]
pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1714] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1709] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1022:170a] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1022:170b] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1022:7804] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f]
pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127]
pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117]
pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123]
pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f]
pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xf0349000-0xf0349fff]
pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xf0348000-0xf03480ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8176] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x18: [mem 0xf0200000-0xf0203fff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xf0100000-0xf0100fff]
pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:01.0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf9bf000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff]
e820: reserve RAM buffer [mem 0x1ff000000-0x1ffffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs SYN1e42 SYN1e00 SYN0002 PNP0f13 (active)
system 00:04: [io 0x0400-0x04cf] could not be reserved
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0680-0x06ff] has been reserved
system 00:04: [io 0x077a] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cdb] has been reserved
system 00:04: [io 0x0840-0x0847] has been reserved
system 00:04: [io 0x0380-0x0387] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:05: [mem 0xffe00000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:04.0: PCI bridge to [bus 01]
pci 0000:00:04.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:04.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:05.0: PCI bridge to [bus 02]
pci 0000:00:05.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:05.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf0110000-0xf011ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 03]
pci 0000:00:06.0: bridge window [mem 0xf0100000-0xf01fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xf0100000-0xf01fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff window]
pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff window]
pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff window]
pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff window]
pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff window]
pci_bus 0000:04: resource 18 [mem 0xe0000000-0xf7ffffff window]
pci_bus 0000:04: resource 19 [mem 0xfc000000-0xfed3ffff window]
pci_bus 0000:04: resource 20 [mem 0xfed45000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35184K (ffff880033b38000 - ffff880035d94000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb9bf000-0xdf9bf000] (64MB) mapped at [ffff8800db9bf000-ffff8800df9befff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1467265832.908:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
ehci-pci 0000:00:16.2: irq 17, io mem 0xf0348000
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-24-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 4.4.0-24-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 4.4.0-24-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:16.0: irq 18, io mem 0xf0349000
ACPI: Battery Slot [BAT0] (battery present)
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 4.4.0-24-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:16.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0: patch_level=0x03000027
microcode: CPU1: patch_level=0x03000027
microcode: CPU2: patch_level=0x03000027
microcode: CPU3: patch_level=0x03000027
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 73e2b8be326740e2e7feadd5601517c5df343108'
zswap: loaded using pool lzo/zbud
Key type trusted registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 4:570:821
rtc_cmos 00:01: setting system clock to 2016-06-30 05:50:33 UTC (1467265833)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1480K (ffffffff81f41000 - ffffffff820b3000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1868K (ffff88000182d000 - ffff880001a00000)
Freeing unused kernel memory: 176K (ffff880001dd4000 - ffff880001e00000)
random: systemd-udevd urandom read with 7 bits of entropy available
usb 1-3: new high-speed USB device number 3 using ehci-pci
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
acpi device:00: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
wmi: Mapper loaded
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 24
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc90000e76000, 44:1e:a1:e0:f3:88, XID 00a00000 IRQ 25
[drm] Initialized drm 1.1.0 20060810
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e100 irq 26
ata2: SATA max UDMA/133 abar m2048@0xf034e000 port 0xf034e180 irq 26
usb 5-1: new low-speed USB device number 2 using ohci-pci
[drm] radeon kernel modesetting enabled.
usb 4-1: new low-speed USB device number 2 using ohci-pci
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (SUMO 0x1002:0x9647 0x103C:0x3566).
[drm] register mmio base: 0xF0300000
[drm] register mmio size: 262144
ATOM BIOS: HP
radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 3818232 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading SUMO Microcode
[drm] Internal thermal controller without fan control
[drm] Found smc ucode version: 0x00011200
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801f173dc00
radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8801f173dc0c
radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001832118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: radeon: MSI limited to 32-bit
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
r8169 0000:02:00.0 eno1: renamed from eth0
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
[drm] ring test on 5 succeeded in 1 usecs
usb 1-3: New USB device found, idVendor=05c8, idProduct=021e
usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 1-3: Product: HP Webcam-101
usb 1-3: Manufacturer: HP Webcam-101
usb 1-3: SerialNumber: HP Webcam-101
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
usb 5-1: New USB device found, idVendor=05e3, idProduct=1205
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB Mouse
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:05E3:1205.0001/input/input7
hid-generic 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:13.0-1/input0
usb 4-1: New USB device found, idVendor=1a2c, idProduct=2124
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Keyboard
usb 4-1: Manufacturer: SEM
input: SEM USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/0003:1A2C:2124.0002/input/input8
hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:12.0-1/input0
input: SEM USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/0003:1A2C:2124.0003/input/input9
hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:12.0-1/input1
tsc: Refined TSC clocksource calibration: 1397.588 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x142539cdb0f, max_idle_ns: 440795267543 ns
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: hp DVDRAM GT31N, NMR0, max UDMA/100
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD5000BPVT-60HXZT3, 01.01A01, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD5000BPVT-6 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM hp DVDRAM GT31N NMR0 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] CRT1: INTERNAL_UNIPHY2
[drm] CRT1: NUTMEG
[drm] Connector 1:
[drm] LVDS-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] LCD1: TRAVIS
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598]
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[drm] fb mappable at 0xE0478000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0
clocksource: Switched to clocksource tsc
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: [/etc/systemd/system/plexmediaserver.service:14] Invalid escape sequences in line, correcting: "/bin/sh -c '/usr/lib/plexmediaserver/Plex\ Media\ Server'"
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Braille Device Support.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Service...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd-journald[299]: Received request to flush runtime journal from PID 1
Initializing HPQ6001 module
input: HP Wireless hotkeys as /devices/virtual/input/input10
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\_SB_.PCI0.SMBS.SMB0) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: HP WMI hotkeys as /devices/virtual/input/input11
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input12
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: rtlwifi: wireless switch is on
media: Linux media interface: v0.10
snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_idt hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC1D0: inputs:
snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
snd_hda_codec_idt hdaudioC1D0: Mic=0xc
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e)
input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input15
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
rtl8192ce 0000:01:00.0 wlo1: renamed from wlan0
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Adding 7839740k swap on /dev/sda5. Priority:-1 extents:1 across:7839740k FS
audit: type=1400 audit(1467265848.952:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=653 comm="apparmor_parser"
audit: type=1400 audit(1467265848.952:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=653 comm="apparmor_parser"
audit: type=1400 audit(1467265848.952:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=653 comm="apparmor_parser"
audit: type=1400 audit(1467265848.952:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=653 comm="apparmor_parser"
audit: type=1400 audit(1467265848.988:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=652 comm="apparmor_parser"
audit: type=1400 audit(1467265848.988:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=652 comm="apparmor_parser"
audit: type=1400 audit(1467265848.996:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=656 comm="apparmor_parser"
audit: type=1400 audit(1467265849.000:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=658 comm="apparmor_parser"
audit: type=1400 audit(1467265849.024:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=654 comm="apparmor_parser"
audit: type=1400 audit(1467265849.024:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=654 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
r8169 0000:02:00.0 eno1: link down
r8169 0000:02:00.0 eno1: link down
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
r8169 0000:02:00.0 eno1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[drm:radeon_atom_pick_dig_encoder [radeon]] *ERROR* chosen encoder in use 1
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xab on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e02b ' to make it known.
[drm:radeon_atom_pick_dig_encoder [radeon]] *ERROR* chosen encoder in use 0