dmesg - LAPTOP-151_disk_20160611
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-88-generic (buildd@lgw01-16) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #135-Ubuntu SMP Wed Jun 8 21:10:42 UTC 2016 (Ubuntu 3.13.0-88.135-generic 3.13.11-ckt39)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf629fff] usable
BIOS-e820: [mem 0x00000000cf62a000-0x00000000cf630fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf631000-0x00000000d0261fff] usable
BIOS-e820: [mem 0x00000000d0262000-0x00000000d073dfff] reserved
BIOS-e820: [mem 0x00000000d073e000-0x00000000d7db3fff] usable
BIOS-e820: [mem 0x00000000d7db4000-0x00000000d7ffffff] reserved
BIOS-e820: [mem 0x00000000d8000000-0x00000000d8758fff] usable
BIOS-e820: [mem 0x00000000d8759000-0x00000000d87fffff] reserved
BIOS-e820: [mem 0x00000000d8800000-0x00000000d8fa9fff] usable
BIOS-e820: [mem 0x00000000d8faa000-0x00000000d8ffffff] ACPI data
BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable
BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
BIOS-e820: [mem 0x00000000da800000-0x00000000dbcf3fff] usable
BIOS-e820: [mem 0x00000000dbcf4000-0x00000000dbffffff] reserved
BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Latitude E7440/06MFX3, BIOS A11 08/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7E00000000 write-back
1 base 0200000000 mask 7FE0000000 write-back
2 base 00E0000000 mask 7FE0000000 uncachable
3 base 00DE000000 mask 7FFE000000 uncachable
4 base 00DD000000 mask 7FFF000000 uncachable
5 base 021F000000 mask 7FFF000000 uncachable
6 base 021EE00000 mask 7FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3552MB, range: 32MB, type UC
reg 4, base: 3536MB, range: 16MB, type UC
reg 5, base: 8688MB, range: 16MB, type UC
reg 6, base: 8686MB, range: 2MB, type UC
total RAM covered: 8126M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3536MB, range: 16MB, type UC
reg 4, base: 3552MB, range: 32MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8686MB, range: 2MB, type UC
reg 8, base: 8688MB, range: 16MB, type UC
e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdbcf4 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd980-0x000fd98f] mapped at [ffff8800000fd980]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
[mem 0x21ec00000-0x21edfffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
[mem 0x21c000000-0x21ebfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21bffffff]
[mem 0x200000000-0x21bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf629fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf629fff] page 4k
init_memory_mapping: [mem 0xcf631000-0xd0261fff]
[mem 0xcf631000-0xcf7fffff] page 4k
[mem 0xcf800000-0xd01fffff] page 2M
[mem 0xd0200000-0xd0261fff] page 4k
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
init_memory_mapping: [mem 0xd073e000-0xd7db3fff]
[mem 0xd073e000-0xd07fffff] page 4k
[mem 0xd0800000-0xd7bfffff] page 2M
[mem 0xd7c00000-0xd7db3fff] page 4k
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0xd8000000-0xd8758fff]
[mem 0xd8000000-0xd85fffff] page 2M
[mem 0xd8600000-0xd8758fff] page 4k
init_memory_mapping: [mem 0xd8800000-0xd8fa9fff]
[mem 0xd8800000-0xd8dfffff] page 2M
[mem 0xd8e00000-0xd8fa9fff] page 4k
init_memory_mapping: [mem 0xd9000000-0xda71bfff]
[mem 0xd9000000-0xda5fffff] page 2M
[mem 0xda600000-0xda71bfff] page 4k
init_memory_mapping: [mem 0xda800000-0xdbcf3fff]
[mem 0xda800000-0xdbbfffff] page 2M
[mem 0xdbc00000-0xdbcf3fff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34b36000-0x36592fff]
ACPI: RSDP 00000000000eee10 000024 (v02 DELL )
ACPI: XSDT 00000000d8fd6080 000084 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: FACP 00000000d8fe7a38 00010C (v05 DELL CBX3 01072009 AMI 00010013)
ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
ACPI: DSDT 00000000d8fd6198 01189F (v02 DELL CBX3 00000014 INTL 20120711)
ACPI: FACS 00000000da7fe080 000040
ACPI: APIC 00000000d8fe7b48 000072 (v03 DELL CBX3 01072009 AMI 00010013)
ACPI: FPDT 00000000d8fe7bc0 000044 (v01 DELL CBX3 01072009 AMI 00010013)
ACPI: LPIT 00000000d8fe7c08 00005C (v01 DELL CBX3 00000000 AMI. 00000005)
ACPI: SSDT 00000000d8fe7c68 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
ACPI: SSDT 00000000d8fe7e90 00051F (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
ACPI: SSDT 00000000d8fe83b0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
ACPI: HPET 00000000d8fe8e88 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
ACPI: SSDT 00000000d8fe8ec0 000455 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: MCFG 00000000d8fe9318 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
ACPI: ASF! 00000000d8fe9358 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: DMAR 00000000d8fe9400 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
Initmem setup node 0 [mem 0x00000000-0x21edfffff]
NODE_DATA [mem 0x21edf4000-0x21edf8fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216400000-ffff88021e3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21edfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xcf629fff]
node 0: [mem 0xcf631000-0xd0261fff]
node 0: [mem 0xd073e000-0xd7db3fff]
node 0: [mem 0xd8000000-0xd8758fff]
node 0: [mem 0xd8800000-0xd8fa9fff]
node 0: [mem 0xd9000000-0xda71bfff]
node 0: [mem 0xda800000-0xdbcf3fff]
node 0: [mem 0x100000000-0x21edfffff]
On node 0 totalpages: 2072960
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13968 pages used for memmap
DMA32 zone: 893924 pages, LIFO batch:31
Normal zone: 18360 pages used for memmap
Normal zone: 1175040 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf62a000-0xcf630fff]
PM: Registered nosave memory: [mem 0xd0262000-0xd073dfff]
PM: Registered nosave memory: [mem 0xd7db4000-0xd7ffffff]
PM: Registered nosave memory: [mem 0xd8759000-0xd87fffff]
PM: Registered nosave memory: [mem 0xd8faa000-0xd8ffffff]
PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
PM: Registered nosave memory: [mem 0xdbcf4000-0xdbffffff]
PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88021ea00000 s81536 r8192 d20864 u524288
pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2040547
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8050616K/8291840K available (7418K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 241224K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
NR_IRQS:16640 nr_irqs:984 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2593.883 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.76 BogoMIPS (lpj=10375532)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28612 entries in 112 pages
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
dmar: RMRR base: 0x000000d7f1a000 end: 0x000000d7f28fff
dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-4310U CPU @ 2.00GHz (fam: 06, model: 45, stepping: 01)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20751.06 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcf62a000-0xcf630fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:18:49, date: 06/11/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dbdadc18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
ACPI: SSDT 00000000dbdad618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
ACPI: SSDT 00000000dbdacd98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f01f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
pci 0000:00:16.3: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff]
pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:03:00.0: [1217:8520] type 00 class 0x080501
pci 0000:03:00.0: reg 0x10: [mem 0xf7c01000-0xf7c01fff]
pci 0000:03:00.0: reg 0x14: [mem 0xf7c00000-0xf7c007ff]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 7F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf62a000-0xcfffffff]
e820: reserve RAM buffer [mem 0xd0262000-0xd3ffffff]
e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd8759000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd8faa000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbcf4000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:04: [io 0x0680-0x069f] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x1c00-0x1cfe] has been reserved
system 00:04: [io 0x1d00-0x1dfe] has been reserved
system 00:04: [io 0x1e00-0x1efe] has been reserved
system 00:04: [io 0x1f00-0x1ffe] has been reserved
system 00:04: [io 0x1800-0x18fe] could not be reserved
system 00:04: [io 0x164e-0x164f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x1854-0x1857] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: Plug and Play ACPI device, IDs DLL05cb PNP0f13 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (disabled)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:0c: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: Plug and Play ACPI device, IDs SMO8810 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 26996K (ffff880034b36000 - ffff880036593000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd3db4000-0xd7db4000] (64MB) mapped at [ffff8800d3db4000-ffff8800d7db3fff]
microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1465643929.984:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15776
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f80000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [AC] (off-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM] (25 C)
GHES: HEST is not enabled!
0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7e3b000
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-88-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT1] (battery absent)
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-88-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 9 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-88-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 6c0359fa8eb9856fd73558ce473e79bbb7f3f815'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 4:263:327
rtc_cmos 00:05: setting system clock to 2016-06-11 11:18:50 UTC (1465643930)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 764K (ffff880001741000 - ffff880001800000)
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[117]: starting version 204
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
[drm] Initialized drm 1.1.0 20060810
sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8520] (rev 1)
mmc0: Unknown controller version (3). You may experience problems.
sdhci-pci 0000:03:00.0: dummy supplies not allowed
mmc0: no vqmmc regulator found
sdhci-pci 0000:03:00.0: dummy supplies not allowed
mmc0: no vmmc regulator found
mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
e1000e 0000:00:19.0: PHY reset is blocked due to SOL/IDER session.
usb 1-1: new high-speed USB device number 2 using ehci-pci
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:e6:d7:22:06:a4
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 60 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag led clo only pio slum part sxs deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 60
ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 60
ata3: DUMMY
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
usb 1-1: New USB device found, idVendor=8087, idProduct=8000
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 8 ports detected
i915 0000:00:02.0: irq 61 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
usb 2-4: new high-speed USB device number 2 using xhci_hcd
ata1: SATA link down (SStatus 0 SControl 300)
usb 2-4: New USB device found, idVendor=0c45, idProduct=64d2
usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-4: Product: Laptop_Integrated_Webcam_HD
usb 2-4: Manufacturer: CN07YYTT724874AHACPAA00
usb 1-1.3: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2593.994 MHz
usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: ATA-9: SAMSUNG SSD PM851 mSATA 256GB, EXT4AD0Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 EXT4 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Switched to clocksource tsc
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:41: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 65 bits of entropy available
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[334]: starting version 204
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
random: nonblocking pool is initialized
lp: driver loaded but no devices found
mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
parport_pc 00:0a: [io 0x0378-0x037b]
parport_pc 00:0a: [irq 5]
ppdev: user-space parallel port driver
systemd-udevd[366]: renamed network interface eth0 to eth1
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \_SB_.PCI0.EHC2.E1PM 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \_SB_.PCI0.EHC1.E1PM 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
type=1400 audit(1465643933.868:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=441 comm="apparmor_parser"
type=1400 audit(1465643933.868:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
type=1400 audit(1465643933.868:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
type=1400 audit(1465643933.868:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
type=1400 audit(1465643933.868:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
type=1400 audit(1465643933.868:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
Linux video capture interface: v2.00
iwlwifi 0000:02:00.0: irq 63 for MSI/MSI-X
iwlwifi 0000:02:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d2)
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
parport_pc 00:0a: activated
parport_pc 00:0a: reported by Plug and Play ACPI
parport_pc 00:0a: disabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
FS-Cache: Netfs 'nfs' registered for caching
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input9
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
HDA driver get symbol successfully from i915 module
snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
snd_hda_intel 0000:00:03.0: irq 65 for MSI/MSI-X
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SKU: Nid=0x1d sku_cfg=0x40700001
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Dock Mic=0x19
Headset Mic=0x1a
Internal Mic=0x12
realtek: No valid SSID, checking pincfg 0x40700001 for NID 0x1d
realtek: Enabling init ASM_ID=0x0001 CODEC_ID=10ec0292
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
input: Dell WMI hotkeys as /devices/virtual/input/input16
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
systemd-udevd[358]: Error calling EVIOCSKEYCODE: Invalid argument
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
nfc: nfc_init: NFC Core ver 0.1
NET: Registered protocol family 39
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
systemd-udevd[372]: renamed network interface wlan0 to wlan1
type=1400 audit(1465643934.620:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=685 comm="apparmor_parser"
type=1400 audit(1465643934.620:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=685 comm="apparmor_parser"
type=1400 audit(1465643934.624:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=685 comm="apparmor_parser"
Probing NFC pn544
intel_rapl: domain uncore energy ctr 4416:4416 not working, skip
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
init: cups main process (690) killed by HUP signal
init: cups main process ended, respawning
init: failsafe main process (704) killed by TERM signal
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
type=1400 audit(1465643935.424:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=898 comm="apparmor_parser"
type=1400 audit(1465643935.424:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=898 comm="apparmor_parser"
type=1400 audit(1465643935.424:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=898 comm="apparmor_parser"
type=1400 audit(1465643935.424:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=898 comm="apparmor_parser"
type=1400 audit(1465643935.424:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=898 comm="apparmor_parser"
type=1400 audit(1465643935.428:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=898 comm="apparmor_parser"
type=1400 audit(1465643935.432:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=897 comm="apparmor_parser"
type=1400 audit(1465643935.432:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=897 comm="apparmor_parser"
type=1400 audit(1465643935.432:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=899 comm="apparmor_parser"
type=1400 audit(1465643935.432:20): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=899 comm="apparmor_parser"
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
init: gdm main process (1101) killed by TERM signal
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (1254) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: anacron main process (1096) killed by TERM signal
wlan1: authenticate with 00:90:0e:03:21:9a
wlan1: send auth to 00:90:0e:03:21:9a (try 1/3)
wlan1: authenticated
wlan1: associate with 00:90:0e:03:21:9a (try 1/3)
wlan1: RX AssocResp from 00:90:0e:03:21:9a (capab=0x411 status=0 aid=2)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
wlan1: deauthenticating from 00:90:0e:03:21:9a by local choice (reason=2)
wlan1: authenticate with 00:90:0e:03:21:9a
wlan1: send auth to 00:90:0e:03:21:9a (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticated
wlan1: associate with 00:90:0e:03:21:9a (try 1/3)
wlan1: RX AssocResp from 00:90:0e:03:21:9a (capab=0x411 status=0 aid=2)
wlan1: associated
audit_printk_skb: 123 callbacks suppressed
type=1400 audit(1465643965.296:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1880 comm="apparmor_parser"
type=1400 audit(1465643965.296:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1880 comm="apparmor_parser"
type=1400 audit(1465643965.296:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1880 comm="apparmor_parser"
type=1400 audit(1465643965.536:65): apparmor="DENIED" operation="mount" info="failed mntpnt match" error=-13 profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/" pid=1902 comm="init" fstype="proc" srcname="proc" flags="rw"
type=1400 audit(1465643965.536:66): apparmor="DENIED" operation="mount" info="failed mntpnt match" error=-13 profile="/usr/lib/lightdm/lightdm-guest-session" name="/sys/" pid=1902 comm="init" fstype="sysfs" srcname="sysfs" flags="rw"
type=1400 audit(1465643965.564:67): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/2003/cmdline" pid=1986 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465643965.564:68): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/2004/cmdline" pid=1986 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465643965.564:69): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/2006/cmdline" pid=1986 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465643965.572:70): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/2011/cmdline" pid=1986 comm="dbus-daemon" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465643965.708:71): apparmor="DENIED" operation="mount" info="failed mntpnt match" error=-13 profile="/usr/lib/lightdm/lightdm-guest-session" name="/run/user/120/gvfs/" pid=2074 comm="gvfsd-fuse" fstype="fuse.gvfsd-fuse" srcname="gvfsd-fuse" flags="rw, nosuid, nodev"
audit_printk_skb: 27 callbacks suppressed
type=1400 audit(1465643984.036:81): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/vm/overcommit_memory" pid=2266 comm="pool" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465643994.264:82): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/vm/overcommit_memory" pid=2486 comm="pool" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465644010.788:83): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/vm/overcommit_memory" pid=2500 comm="pool" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465644019.472:84): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/vm/overcommit_memory" pid=2180 comm="gnome-session" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465644019.488:85): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/vm/overcommit_memory" pid=2439 comm="telepathy-indic" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
type=1400 audit(1465644019.496:86): apparmor="DENIED" operation="open" profile="/usr/lib/lightdm/lightdm-guest-session" name="/proc/sys/vm/overcommit_memory" pid=2341 comm="unity-fallback-" requested_mask="r" denied_mask="r" fsuid=120 ouid=0
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced.
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced.
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced.
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: GlidePoint at isa0060/serio1/input0 - driver resynced.
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 00:90:0e:03:21:9a
wlan1: direct probe to 00:90:0e:03:21:9a (try 1/3)
wlan1: send auth to 00:90:0e:03:21:9a (try 2/3)
wlan1: authenticated
wlan1: associate with 00:90:0e:03:21:9a (try 1/3)
wlan1: RX AssocResp from 00:90:0e:03:21:9a (capab=0x411 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
perf samples too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
e1000e 0000:00:19.0: irq 59 for MSI/MSI-X
wlan1: deauthenticating from 00:90:0e:03:21:9a by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ahci 0000:00:1f.2: port does not support device sleep
init: anacron main process (15575) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.015 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 190.653 msecs
PM: late suspend of devices complete after 15.970 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 80.189 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 63
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 21
Broke affinity for irq 58
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 176.589 msecs
PM: early resume of devices complete after 0.081 msecs
snd_hda_intel 0000:00:03.0: irq 59 for MSI/MSI-X
mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 1-1: reset high-speed USB device number 2 using ehci-pci
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
ahci 0000:00:1f.2: port does not support device sleep
sd 1:0:0:0: [sda] Starting disk
usb 2-4: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020db254c0
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 741.636 msecs
PM: Finishing wakeup.
iwlwifi 0000:02:00.0: no hotplug settings from platform
sdhci-pci 0000:03:00.0: no hotplug settings from platform
Restarting tasks ... done.
pci_bus 0000:01: Allocating resources
pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
pci_bus 0000:02: Allocating resources
pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci_bus 0000:03: Allocating resources
pcieport 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
pcieport 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xdf600000-0xdf7fffff 64bit pref]
pcieport 0000:00:1c.4: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pcieport 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
pcieport 0000:00:1c.4: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
serial 0000:00:16.3: no hotplug settings from platform
serial 0000:00:16.3: using default PCI settings
e1000e 0000:00:19.0: no hotplug settings from platform
e1000e 0000:00:19.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
iwlwifi 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
sdhci-pci 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
serial 0000:00:16.3: no hotplug settings from platform
serial 0000:00:16.3: using default PCI settings
e1000e 0000:00:19.0: no hotplug settings from platform
e1000e 0000:00:19.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
iwlwifi 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
sdhci-pci 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
video LNXVIDEO:00: Restoring backlight state
init: anacron main process (15838) killed by TERM signal
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
wlan1: authenticate with 00:90:0e:03:21:9a
wlan1: send auth to 00:90:0e:03:21:9a (try 1/3)
wlan1: authenticated
wlan1: associate with 00:90:0e:03:21:9a (try 1/3)
wlan1: RX AssocResp from 00:90:0e:03:21:9a (capab=0x411 status=0 aid=1)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
wlan1: deauthenticated from 00:90:0e:03:21:9a (Reason: 15)
cfg80211: Calling CRDA to update world regulatory domain
wlan1: authenticate with 00:90:0e:03:21:9a
wlan1: send auth to 00:90:0e:03:21:9a (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wlan1: authenticated
wlan1: associate with 00:90:0e:03:21:9a (try 1/3)
wlan1: RX AssocResp from 00:90:0e:03:21:9a (capab=0x411 status=0 aid=1)
wlan1: associated
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
wlan1: deauthenticating from 00:90:0e:03:21:9a by local choice (reason=3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: anacron main process (16254) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.003 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 1:0:0:0: [sda] Synchronizing SCSI cache
sd 1:0:0:0: [sda] Stopping disk
Removing pn544
PM: suspend of devices complete after 142.667 msecs
PM: late suspend of devices complete after 15.979 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
e1000e 0000:00:19.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 80.198 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
Broke affinity for irq 63
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
Broke affinity for irq 21
Broke affinity for irq 60
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 176.553 msecs
PM: early resume of devices complete after 0.083 msecs
usb usb2: root hub lost power or was reset
usb usb3: root hub lost power or was reset
snd_hda_intel 0000:00:03.0: irq 59 for MSI/MSI-X
xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
mei_me 0000:00:16.0: irq 62 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: irq 64 for MSI/MSI-X
e1000e 0000:00:19.0: System wakeup disabled by ACPI
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19
PM: Device 00:08 failed to resume: error -19
usb 1-1: reset high-speed USB device number 2 using ehci-pci
mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
Probing NFC pn544
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
ata2.00: configured for UDMA/133
ahci 0000:00:1f.2: port does not support device sleep
sd 1:0:0:0: [sda] Starting disk
usb 2-4: reset high-speed USB device number 2 using xhci_hcd
xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020db254c0
usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
PM: resume of devices complete after 735.434 msecs
PM: Finishing wakeup.
iwlwifi 0000:02:00.0: no hotplug settings from platform
sdhci-pci 0000:03:00.0: no hotplug settings from platform
Restarting tasks ... done.
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
serial 0000:00:16.3: no hotplug settings from platform
serial 0000:00:16.3: using default PCI settings
e1000e 0000:00:19.0: no hotplug settings from platform
e1000e 0000:00:19.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
iwlwifi 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
sdhci-pci 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
pci_bus 0000:01: Allocating resources
pci_bus 0000:02: Allocating resources
pci_bus 0000:03: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci 0000:00:00.0: no hotplug settings from platform
pci 0000:00:00.0: using default PCI settings
i915 0000:00:02.0: no hotplug settings from platform
i915 0000:00:02.0: using default PCI settings
snd_hda_intel 0000:00:03.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: no hotplug settings from platform
xhci_hcd 0000:00:14.0: using default PCI settings
mei_me 0000:00:16.0: no hotplug settings from platform
mei_me 0000:00:16.0: using default PCI settings
serial 0000:00:16.3: no hotplug settings from platform
serial 0000:00:16.3: using default PCI settings
e1000e 0000:00:19.0: no hotplug settings from platform
e1000e 0000:00:19.0: using default PCI settings
snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
pcieport 0000:00:1c.0: no hotplug settings from platform
pcieport 0000:00:1c.3: no hotplug settings from platform
iwlwifi 0000:02:00.0: no hotplug settings from platform
pcieport 0000:00:1c.4: no hotplug settings from platform
sdhci-pci 0000:03:00.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: no hotplug settings from platform
ehci-pci 0000:00:1d.0: using default PCI settings
lpc_ich 0000:00:1f.0: no hotplug settings from platform
lpc_ich 0000:00:1f.0: using default PCI settings
ahci 0000:00:1f.2: no hotplug settings from platform
ahci 0000:00:1f.2: using default PCI settings
pci 0000:00:1f.3: no hotplug settings from platform
pci 0000:00:1f.3: using default PCI settings
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
Bluetooth: hci0: read Intel version: 370710018002030d00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
video LNXVIDEO:00: Restoring backlight state
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
e1000e 0000:00:19.0: irq 65 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
wlan1: authenticate with 00:90:0e:03:21:9a
wlan1: send auth to 00:90:0e:03:21:9a (try 1/3)
wlan1: authenticated
wlan1: associate with 00:90:0e:03:21:9a (try 1/3)
wlan1: RX AssocResp from 00:90:0e:03:21:9a (capab=0x411 status=0 aid=4)
wlan1: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
type=1400 audit(1465667611.364:87): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=17145 comm="apparmor_parser"
type=1400 audit(1465667611.364:88): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=17145 comm="apparmor_parser"
type=1400 audit(1465667611.364:89): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=17145 comm="apparmor_parser"