dmesg - GpuTest
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
wmi: Mapper loaded
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdc379000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdd667000-0xdfffffff]
e820: reserve RAM buffer [mem 0xddc93000-0xdfffffff]
e820: reserve RAM buffer [mem 0xde000000-0xdfffffff]
NET: Registered protocol family 8
NET: Registered protocol family 20
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
FS-Cache: Loaded
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfbfff000-0xfbffffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0290-0x029f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io 0x0400-0x0453] could not be reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x1180-0x119f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:05: [mem 0xff000000-0xffffffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 03]
pci 0000:00:01.0: bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:11.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.1: bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.3: PCI bridge to [bus 07]
pci 0000:00:1c.3: bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.4: PCI bridge to [bus 08]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.5: PCI bridge to [bus 09]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:09: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:09: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:0a: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:0a: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:0a: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:0a: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:0a: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0a: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:0a: resource 10 [mem 0xe0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 2272K (ffff880037b7f000 - ffff880037db7000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd8379000-0xdc379000] (64MB) mapped at [ffff8800d8379000-ffff8800dc378fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain dram 2^-16 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e43b51032, max_idle_ns: 440795357228 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1462549893.510:1): initialized
DLM installed
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Key type cifs.spnego registered
Key type cifs.idmap registered
fuse init (API version 7.24)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90000800000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
ioatdma: Intel(R) QuickData Technology Driver 4.00
[drm] Initialized drm 1.1.0 20060810
checking generic (f9000000 500000) vs hw (f0000000 8000000)
checking generic (f9000000 500000) vs hw (f8000000 2000000)
fb: switching to nouveaufb from VESA VGA
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA GK104 (0e4090a2)
nouveau 0000:01:00.0: bios: version 80.04.4b.00.37
nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[TTM] Zone kernel: Available graphics memory: 8175624 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 01000f02 00020030
nouveau 0000:01:00.0: DRM: DCB outp 01: 02000f00 00000000
nouveau 0000:01:00.0: DRM: DCB outp 02: 08011f82 00020030
nouveau 0000:01:00.0: DRM: DCB outp 03: 02822f62 0f420010
nouveau 0000:01:00.0: DRM: DCB outp 05: 04833fb6 0f420010
nouveau 0000:01:00.0: DRM: DCB outp 06: 04033f72 00020010
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:01:00.0: DRM: DCB conn 01: 00020131
nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
nouveau 0000:01:00.0: DRM: DCB conn 03: 00010346
nouveau 0000:01:00.0: DRM: DCB conn 04: 00000460
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
nouveau 0000:01:00.0: DRM: allocated 2560x1440 fb: 0x60000, bo ffff880408ce1800
fbcon: nouveaufb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
loop: module loaded
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
SCSI Media Changer driver v0.25
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625280 irq 28
ata5: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfb625000 port 0xfb625380 irq 28
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host6: ahci
scsi host7: ahci
ata7: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200100 irq 29
ata8: SATA max UDMA/133 abar m512@0xfb200000 port 0xfb200180 irq 29
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d0:2b:26:65:bf
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.20
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb627000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.5.3-gentoo ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb626000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.5.3-gentoo ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:03:00.0: hcc params 0x002820eb hci version 0x96 quirks 0x00080080
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.5.3-gentoo xhci-hcd
usb usb3: SerialNumber: 0000:03:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.5.3-gentoo xhci-hcd
usb usb4: SerialNumber: 0000:03:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3.00: ATAPI: ATAPI iHES112 3, ML05, max UDMA/100
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata5.00: ATA-9: ST1000DM003-1CH162, CC47, max UDMA/133
ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 8B0Q PQ: 0 ANSI: 5
ata5.00: configured for UDMA/133
ata2.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata6.00: ATA-8: WDC WD3000GLFS-01F8U0, 03.03V01, max UDMA/133
ata6.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
xhci_hcd 0000:06:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.5.3-gentoo xhci-hcd
usb usb5: SerialNumber: 0000:06:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.5.3-gentoo xhci-hcd
usb usb6: SerialNumber: 0000:06:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:07:00.0: hcc params 0x0200f180 hci version 0x96 quirks 0x00080000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.5.3-gentoo xhci-hcd
usb usb7: SerialNumber: 0000:07:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.5.3-gentoo xhci-hcd
usb usb8: SerialNumber: 0000:07:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver ati_remote2
usbcore: registered new interface driver keyspan_remote
input: PC Speaker as /devices/platform/pcspkr/input/input3
usbcore: registered new interface driver powermate
usbcore: registered new interface driver yealink
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
uvcvideo: Unable to create debugfs directory
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
snd_hda_intel 0000:01:00.1: Disabling MSI
usbcore: registered new interface driver snd-usb-audio
GACT probability on
Mirror/redirect action on
u32 classifier
Performance counters on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ipip: IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: arp_tables: (C) 2002 David S. Miller
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Ebtables v2.0 registered
lec:lane_module_init: lec.c: initialized
mpoa:atm_mpoa_init: mpc.c: initialized
8021q: 802.1Q VLAN Support v1.8
sctp: Hash tables configured (bind 256/256)
Key type dns_resolver registered
microcode: CPU0 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU1 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU2 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU3 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU4 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU5 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU6 sig=0x206d7, pf=0x4, revision=0x70c
microcode: CPU7 sig=0x206d7, pf=0x4, revision=0x70c
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2016-05-06 15:51:35 UTC (1462549895)
ALSA device list:
No soundcards found.
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sda: sda1 sda2
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM ATAPI iHES112 3 ML05 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
scsi 4:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC47 PQ: 0 ANSI: 5
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
sd 4:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: Direct-Access ATA WDC WD3000GLFS-0 3V01 PQ: 0 ANSI: 5
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
sd 5:0:0:0: [sdd] 586072368 512-byte logical blocks: (300 GB/279 GiB)
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 3-1: New USB device found, idVendor=2109, idProduct=0811
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
sdd: sdd1
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sd 5:0:0:0: [sdd] Attached SCSI disk
usb 3-1.1: new high-speed USB device number 3 using xhci_hcd
usb 2-1.4: new high-speed USB device number 3 using ehci-pci
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 916K (ffffffff81c0e000 - ffffffff81cf3000)
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-1.1: Product: GT-I9305
usb 3-1.1: Manufacturer: samsung
usb 3-1.1: SerialNumber: 42f74a06229baf07
random: systemd-udevd urandom read with 46 bits of entropy available
usb 2-1.4: New USB device found, idVendor=1a40, idProduct=0101
usb 2-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.4: Product: USB 2.0 Hub
hub 2-1.4:1.0: USB hub found
hub 2-1.4:1.0: 4 ports detected
usb 3-1.2: new high-speed USB device number 4 using xhci_hcd
usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: SAMSUNG_Android
usb 3-1.2: Manufacturer: SAMSUNG
usb 3-1.2: SerialNumber: 2cfdb4ee
usb 2-1.4.3: new high-speed USB device number 5 using ehci-pci
usb 2-1.4.3: New USB device found, idVendor=05e3, idProduct=0610
usb 2-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.3: Product: USB2.0 Hub
usb 2-1.4.3: Manufacturer: GenesysLogic
hub 2-1.4.3:1.0: USB hub found
hub 2-1.4.3:1.0: 4 ports detected
usb 2-1.4.3.1: new full-speed USB device number 6 using ehci-pci
usb 2-1.4.3.1: new high-speed USB device number 7 using ehci-pci
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.4.3.1: New USB device found, idVendor=0bda, idProduct=0307
usb 2-1.4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4.3.1: Product: USB3.0 Card Reader
usb 2-1.4.3.1: Manufacturer: Realtek
usb 2-1.4.3.1: SerialNumber: 201006010301
usb 2-1.4.1: new full-speed USB device number 8 using ehci-pci
usb-storage 2-1.4.3.1:1.0: USB Mass Storage device detected
scsi host8: usb-storage 2-1.4.3.1:1.0
usb 2-1.4.1: New USB device found, idVendor=8054, idProduct=0001
usb 2-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.1: Product: KVM PORT SWITCH
usb 2-1.4.1: Manufacturer: ROCLA
hub 2-1.4.1:1.0: USB hub found
hub 2-1.4.1:1.0: 4 ports detected
usb 2-1.4.3.2: new high-speed USB device number 9 using ehci-pci
usb 2-1.4.1.1: new low-speed USB device number 10 using ehci-pci
usb 2-1.4.3.2: New USB device found, idVendor=046d, idProduct=09a1
usb 2-1.4.3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 2-1.4.3.2: SerialNumber: 7D512330
uvcvideo: Found UVC 1.00 device (046d:09a1)
input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.3/2-1.4.3.2/2-1.4.3.2:1.0/input/input16
random: nonblocking pool is initialized
usb 2-1.4.1.1: New USB device found, idVendor=046d, idProduct=c050
usb 2-1.4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.1.1: Product: USB-PS/2 Optical Mouse
usb 2-1.4.1.1: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1.1/2-1.4.1.1:1.0/0003:046D:C050.0001/input/input17
hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.4.1.1/input0
usb 2-1.4.3.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 2-1.4.3.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
usb 2-1.4.1.2: new low-speed USB device number 11 using ehci-pci
usb 2-1.4.1.2: New USB device found, idVendor=046d, idProduct=c312
usb 2-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.4.1.2: Product: USB Multimedia Keyboard
usb 2-1.4.1.2: Manufacturer: LITEON Technology
input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1.2/2-1.4.1.2:1.0/0003:046D:C312.0002/input/input18
hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.0-1.4.1.2/input0
usb 2-1.4.3.4: new high-speed USB device number 12 using ehci-pci
usb 2-1.4.3.4: New USB device found, idVendor=05e3, idProduct=0608
usb 2-1.4.3.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.4.3.4: Product: USB2.0 Hub
hub 2-1.4.3.4:1.0: USB hub found
hub 2-1.4.3.4:1.0: 2 ports detected
usb 2-1.4.1.3: new low-speed USB device number 13 using ehci-pci
scsi 8:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg5 type 0
sd 8:0:0:0: [sde] Attached SCSI removable disk
systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK -SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT -GNUTLS +ACL -XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
usb 2-1.4.1.3: New USB device found, idVendor=058f, idProduct=9410
usb 2-1.4.1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 2-1.4.1.3: Product: USB Multimedia Keyboard
usb 2-1.4.1.3: SerialNumber: USB Multimedia Keyboard
input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1.3/2-1.4.1.3:1.0/0003:058F:9410.0003/input/input19
hid-generic 0003:058F:9410.0003: input,hidraw2: USB HID v1.10 Keyboard [USB Multimedia Keyboard] on usb-0000:00:1d.0-1.4.1.3/input0
input: USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4.1/2-1.4.1.3/2-1.4.1.3:1.1/0003:058F:9410.0004/input/input20
hid-generic 0003:058F:9410.0004: input,hidraw3: USB HID v1.10 Device [USB Multimedia Keyboard] on usb-0000:00:1d.0-1.4.1.3/input1
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input21
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input22
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Stopped target Sound Card.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Login Prompts.
systemd[1]: Listening on Network Service Netlink Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory...
systemd[1]: Activating swap /dev/sdb2...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Slices.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Started Create list of required static device nodes for the current kernel.
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3600000324 Hz
vboxdrv: Successfully loaded version 5.0.20 (interface 0x00240000)
systemd[1]: Started Setup Virtual Console.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Temporary Directory.
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Configuration File System.
Adding 974480k swap on /dev/sdb2. Priority:-1 extents:1 across:974480k
systemd[1]: Activated swap /dev/sdb2.
systemd[1]: Reached target Swap.
systemd[1]: Started Journal Service.
EXT4-fs (sdb1): re-mounted. Opts: (null)
systemd-journald[1567]: Received request to flush runtime journal from PID 1
usb 2-1.4.3.2: reset high-speed USB device number 9 using ehci-pci
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
device eth0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
CIFS VFS: Error connecting to socket. Aborting operation.
CIFS VFS: cifs_mount failed w/return code = -101
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
br0: port 1(eth0) entered forwarding state
baloo_file_extr[3002]: segfault at 4 ip 00007fdf3a829428 sp 00007ffc6485e468 error 4 in libexiv2.so.14.0.0[7fdf3a6cd000+2b2000]
usb 3-1.1: USB disconnect, device number 3
usb 3-1.1: new high-speed USB device number 5 using xhci_hcd
usb 3-1.1: new high-speed USB device number 6 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-1.1: Product: GT-I9305
usb 3-1.1: Manufacturer: samsung
usb 3-1.1: SerialNumber: 42f74a06229baf07
usb 3-1.2: USB disconnect, device number 4
usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: SAMSUNG_Android
usb 3-1.2: Manufacturer: SAMSUNG
usb 3-1.2: SerialNumber: 2cfdb4ee
usb 3-1.1: USB disconnect, device number 6
usb 3-1.1: new high-speed USB device number 8 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-1.1: Product: GT-I9305
usb 3-1.1: Manufacturer: samsung
usb 3-1.1: SerialNumber: 42f74a06229baf07
usb 3-1.1: USB disconnect, device number 8
usb 3-1.1: new high-speed USB device number 9 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-1.1: Product: GT-I9305
usb 3-1.1: Manufacturer: samsung
usb 3-1.1: SerialNumber: 42f74a06229baf07
usb 3-1.1: USB disconnect, device number 9
usb 3-1.1: new high-speed USB device number 10 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-1.1: Product: GT-I9305
usb 3-1.1: Manufacturer: samsung
usb 3-1.1: SerialNumber: 42f74a06229baf07
usb 3-1.1: USB disconnect, device number 10
usb 3-1.1: new high-speed USB device number 11 using xhci_hcd
usb 3-1.1: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
usb 3-1.1: Product: GT-I9305
usb 3-1.1: Manufacturer: samsung
usb 3-1.1: SerialNumber: 42f74a06229baf07
usb 3-1.1: USB disconnect, device number 11
usb 3-1.2: USB disconnect, device number 7
usb 3-1.2: new high-speed USB device number 12 using xhci_hcd
usb 3-1.2: New USB device found, idVendor=04e8, idProduct=6860
usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1.2: Product: SAMSUNG_Android
usb 3-1.2: Manufacturer: SAMSUNG
usb 3-1.2: SerialNumber: 2cfdb4ee
GpuTest[17369]: segfault at 2d0 ip 00007f7abe4315e0 sp 00007ffc8a588998 error 4 in libpthread-2.23.so[7f7abe429000+17000]
GpuTest[17441]: segfault at 2d0 ip 00007fae8765f5e0 sp 00007fff3d8db4a8 error 4 in libpthread-2.23.so[7fae87657000+17000]
GpuTest[17486]: segfault at 2d0 ip 00007efc265345e0 sp 00007ffcc9588608 error 4 in libpthread-2.23.so[7efc2652c000+17000]