dmesg - DRI2
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-21-generic (buildd@lgw01-21) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 (Ubuntu 4.4.0-21.37-generic 4.4.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000392b3fff] usable
BIOS-e820: [mem 0x00000000392b4000-0x0000000039e23fff] reserved
BIOS-e820: [mem 0x0000000039e24000-0x000000003a0e4fff] usable
BIOS-e820: [mem 0x000000003a0e5000-0x000000003ac85fff] ACPI NVS
BIOS-e820: [mem 0x000000003ac86000-0x000000003b5b8fff] reserved
BIOS-e820: [mem 0x000000003b5b9000-0x000000003b619fff] type 20
BIOS-e820: [mem 0x000000003b61a000-0x000000003b61afff] usable
BIOS-e820: [mem 0x000000003b61b000-0x000000003b6a0fff] reserved
BIOS-e820: [mem 0x000000003b6a1000-0x000000003b8b7fff] usable
BIOS-e820: [mem 0x000000003b8b8000-0x000000003bff8fff] reserved
BIOS-e820: [mem 0x000000003bff9000-0x000000003bffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x000000004fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000004bfffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x3a8f9000 ACPI 2.0=0x3a8f9000 ESRT=0x3b480e18 SMBIOS=0xf0570 MPS=0xfd640
esrt: Reserving ESRT space from 0x000000003b480e18 to 0x000000003b480e50.
SMBIOS 2.8 present.
DMI: MSI MS-7885/X99S SLI PLUS (MS-7885), BIOS 1.30 09/25/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x4c0000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 000040000000 mask 3FFFC0000000 uncachable
2 base 380000000000 mask 3FC000000000 uncachable
3 base 00003F000000 mask 3FFFFF000000 uncachable
4 base 0000E0000000 mask 3FFFF0000000 write-through
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x3c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd930-0x000fd93f] mapped at [ffff8800000fd930]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x031fe000, 0x031fefff] PGTABLE
BRK [0x031ff000, 0x031fffff] PGTABLE
BRK [0x03200000, 0x03200fff] PGTABLE
BRK [0x03201000, 0x03201fff] PGTABLE
BRK [0x03202000, 0x03202fff] PGTABLE
BRK [0x03203000, 0x03203fff] PGTABLE
RAMDISK: [mem 0x31874000-0x33aaffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003A8F9000 000024 (v02 ALASKA)
ACPI: XSDT 0x000000003A8F9098 0000AC (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x000000003A925BA8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x000000003A8F91D8 02C9CB (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000003AC82F80 000040
ACPI: APIC 0x000000003A925CB8 000170 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x000000003A925E28 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x000000003A925E70 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x000000003A925F10 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x000000003A925F50 000042 (v01 00000000 00000000)
ACPI: BDAT 0x000000003A925F98 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x000000003A925FC8 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x000000003A926000 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x000000003A926090 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x000000003A9260F8 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x000000003A926128 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x000000003A926F80 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x000000003A926FC0 00D647 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: DMAR 0x000000003A934608 0000E4 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: ASF! 0x000000003A9346F0 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: BGRT 0x000000003A934790 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x4bfffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x3fffffff] + [mem 0x100000000-0x4bfffffff] -> [mem 0x00000000-0x4bfffffff]
NODE_DATA(0) allocated [mem 0x4bfff7000-0x4bfffbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000004bfffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000392b3fff]
node 0: [mem 0x0000000039e24000-0x000000003a0e4fff]
node 0: [mem 0x000000003b61a000-0x000000003b61afff]
node 0: [mem 0x000000003b6a1000-0x000000003b8b7fff]
node 0: [mem 0x000000003bff9000-0x000000003bffffff]
node 0: [mem 0x0000000100000000-0x00000004bfffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000004bfffffff]
On node 0 totalpages: 4167475
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 3615 pages used for memmap
DMA32 zone: 231316 pages, LIFO batch:31
Normal zone: 61440 pages used for memmap
Normal zone: 3932160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 20 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x392b4000-0x39e23fff]
PM: Registered nosave memory: [mem 0x3a0e5000-0x3ac85fff]
PM: Registered nosave memory: [mem 0x3ac86000-0x3b5b8fff]
PM: Registered nosave memory: [mem 0x3b5b9000-0x3b619fff]
PM: Registered nosave memory: [mem 0x3b61b000-0x3b6a0fff]
PM: Registered nosave memory: [mem 0x3b8b8000-0x3bff8fff]
PM: Registered nosave memory: [mem 0x3c000000-0x3fffffff]
PM: Registered nosave memory: [mem 0x40000000-0x4fffffff]
PM: Registered nosave memory: [mem 0x50000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x50000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:20 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff8804af000000 s98008 r8192 d28968 u262144
pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 -- -- -- --
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4102331
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16197604K/16669900K available (8356K kernel code, 1278K rwdata, 3920K rodata, 1476K init, 1292K bss, 472296K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=20, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=20.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=20
NR_IRQS:16640 nr_irqs:992 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3099.962 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.92 BogoMIPS (lpj=12399848)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff820b2000 - ffffffff820b9000)
ftrace: allocating 31878 entries in 125 pages
smpboot: Max logical packages: 2
smpboot: APIC(0) Converting physical 0 to logical package 0
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffd000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffd000 ver 1:0 cap d2008c10ef0466 ecap f0205b
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar1: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
DMAR: RMRR base: 0x0000003b491000 end: 0x0000003b4a0fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2687W v3 @ 3.10GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 87521029544 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19
x86: Booted up 1 node, 20 CPUs
smpboot: Total of 20 processors activated (123998.48 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x3a0e5000-0x3ac85fff] (12193792 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 0:09:28, date: 04/22/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x40000000-0x4fffffff] (base 0x40000000)
PCI: MMCONFIG at [mem 0x40000000-0x4fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:2fe8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:2fe9] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:2ffa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:2ffb] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:12.4: [8086:2f60] type 00 class 0x088000
pci 0000:ff:12.5: [8086:2f38] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.1: [8086:2f79] type 00 class 0x088000
pci 0000:ff:16.2: [8086:2f6a] type 00 class 0x088000
pci 0000:ff:16.3: [8086:2f6b] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.1: [8086:2fd1] type 00 class 0x088000
pci 0000:ff:17.2: [8086:2fd2] type 00 class 0x088000
pci 0000:ff:17.3: [8086:2fd3] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfbf3e000-0xfbf3efff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
pci 0000:00:11.4: reg 0x10: [io 0xf130-0xf137]
pci 0000:00:11.4: reg 0x14: [io 0xf120-0xf123]
pci 0000:00:11.4: reg 0x18: [io 0xf110-0xf117]
pci 0000:00:11.4: reg 0x1c: [io 0xf100-0xf103]
pci 0000:00:11.4: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:11.4: reg 0x24: [mem 0xfbf3d000-0xfbf3d7ff]
pci 0000:00:11.4: PME# supported from D3hot
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf3c000-0xfbf3c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf39000-0xfbf39fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf38000-0xfbf383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf30000-0xfbf33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf37000-0xfbf373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf36000-0xfbf367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf35000-0xfbf350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1002:6704] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xfbe20000-0xfbe3ffff 64bit]
pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbe00000-0xfbe1ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.1: [1002:aa80] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbe40000-0xfbe43fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:05:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xfbd00000-0xfbd00fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:06:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfbc00000-0xfbc07fff 64bit]
pci 0000:06:00.0: PME# supported from D3cold
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x392b4000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3a0e5000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b61b000-0x3bffffff]
e820: reserve RAM buffer [mem 0x3b8b8000-0x3bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0454-0x0457] has been reserved
system 00:00: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0500-0x057f] has been reserved
system 00:02: [io 0x0400-0x047f] could not be reserved
system 00:02: [io 0x0580-0x059f] has been reserved
system 00:02: [io 0x0600-0x061f] has been reserved
system 00:02: [io 0x0880-0x0883] has been reserved
system 00:02: [io 0x0800-0x081f] has been reserved
system 00:02: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:02: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:02: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:02: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:02: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a0f] has been reserved
system 00:03: [io 0x0a10-0x0a1f] has been reserved
system 00:03: [io 0x0a20-0x0a2f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 04]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1c.4: PCI bridge to [bus 06]
pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x50000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 35056K (ffff880031874000 - ffff880033ab0000)
DMAR: [Firmware Bug]: RMRR entry for device 05:00.0 is broken - applying workaround
DMAR: [Firmware Bug]: RMRR entry for device 06:00.0 is broken - applying workaround
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x2d874000-0x31874000] (64MB) mapped at [ffff88002d874000-ffff880031873fff]
Intel CQM monitoring enabled
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf23c71a6, max_idle_ns: 440795353823 ns
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1461283768.684:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4.1 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf38000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf37000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-21-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:05:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb5: SerialNumber: 0000:05:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb6: SerialNumber: 0000:05:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:06:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb7: SerialNumber: 0000:06:00.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 8
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.4.0-21-generic xhci-hcd
usb usb8: SerialNumber: 0000:06:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU16 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU17 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU18 sig=0x306f2, pf=0x1, revision=0x25
microcode: CPU19 sig=0x306f2, pf=0x1, revision=0x25
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: fc7c0e9f152f32eca50ea2d9722926e5127af244'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 12:253:153
bdi 1:5: hash matches
event_source power: hash matches
acpi device:20: hash matches
rtc_cmos 00:01: setting system clock to 2016-04-22 00:09:29 UTC (1461283769)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1476K (ffffffff81f41000 - ffffffff820b2000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1872K (ffff88000282c000 - ffff880002a00000)
Freeing unused kernel memory: 176K (ffff880002dd4000 - ffff880002e00000)
random: systemd-udevd urandom read with 1 bits of entropy available
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
ahci 0000:00:11.4: version 3.0
ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
PTP clock support registered
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xfbf3d000 port 0xfbf3d280 irq 39
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[drm] Initialized drm 1.1.0 20060810
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata5: DUMMY
ata6: DUMMY
ata7: DUMMY
ata8: DUMMY
ata9: SATA max UDMA/133 abar m2048@0xfbf36000 port 0xfbf36300 irq 40
ata10: DUMMY
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (CAYMAN 0x1002:0x6704 0x1002:0x0B00).
[drm] register mmio base: 0xFBE20000
[drm] register mmio size: 131072
ATOM BIOS: CAYMAN
radeon 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:03:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 8161894 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading CAYMAN Microcode
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8804a5b46c00
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90002432118
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8804a5b46c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8804a5b46c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8804a5b46c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8804a5b46c10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: MSI limited to 32-bit
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 4 usecs
[drm] ring test on 4 succeeded in 3 usecs
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 5-1: new high-speed USB device number 2 using xhci_hcd
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:8a:5b:d7:87:e9
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 5-1: New USB device found, idVendor=2109, idProduct=3431
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-9: PNY CS1211 120GB SSD 754D117-483, CS121101, max UDMA/133
ata4.00: 234441648 sectors, multi 2: LBA48 NCQ (depth 31/32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA PNY CS1211 120GB 1101 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: Attached scsi generic sg0 type 0
sda: sda1 sda2 sda3
sd 3:0:0:0: [sda] Attached SCSI disk
ata9.00: ATA-9: INTEL SSDSCKGW080A4, DC01, max UDMA/133
ata9.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata9.00: configured for UDMA/133
scsi 8:0:0:0: Direct-Access ATA INTEL SSDSCKGW08 DC01 PQ: 0 ANSI: 5
sd 8:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 8:0:0:0: [sdb] Write Protect is off
sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 8:0:0:0: [sdb] Attached SCSI disk
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD1
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DP-2
[drm] HPD3
[drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 2:
[drm] DP-3
[drm] HPD4
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY2
[drm] Connector 3:
[drm] DP-4
[drm] HPD6
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY2
[drm] fb mappable at 0xE0475000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:03:00.0 on minor 0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
usb 5-1.4: new high-speed USB device number 3 using xhci_hcd
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Created slice System Slice.
usb 5-1.4: New USB device found, idVendor=1a40, idProduct=0101
usb 5-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1.4: Product: USB 2.0 Hub
hub 5-1.4:1.0: USB hub found
hub 5-1.4:1.0: 4 ports detected
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Reached target Slices.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Braille Device Support...
systemd[1]: Started Read required files in advance.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Reached target Remote File Systems.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport0: PC-style at 0x378 (0x778)
systemd[1]: Started Braille Device Support.
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[356]: Received request to flush runtime journal from PID 1
[PCSPP,TRISTATE,EPP]
parport0: irq 0 detected
lp0: using parport0 (polling).
usb 5-1.4.2: new low-speed USB device number 4 using xhci_hcd
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input5
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: DRAM domain energy unit 15300pj
usb 5-1.4.2: New USB device found, idVendor=04f2, idProduct=0833
usb 5-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4.2: Product: USB Keyboard
usb 5-1.4.2: Manufacturer: CHICONY
usb 5-1.4.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 5-1.4.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
Adding 16668668k swap on /dev/sda3. Priority:-1 extents:1 across:16668668k SSFS
usb 5-1.4.4: new full-speed USB device number 5 using xhci_hcd
random: nonblocking pool is initialized
usb 5-1.4.4: New USB device found, idVendor=1532, idProduct=0007
usb 5-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4.4: Product: DeathAdder
usb 5-1.4.4: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.0/0003:04F2:0833.0001/input/input13
audit: type=1400 audit(1461283770.908:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=771 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=767 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=769 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=773 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=764 comm="apparmor_parser"
audit: type=1400 audit(1461283770.908:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=763 comm="apparmor_parser"
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:05:00.0-1.4.2/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.1/0003:04F2:0833.0002/input/input14
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:05:00.0-1.4.2/input1
input: Razer DeathAdder as /devices/pci0000:00/0000:00:1c.3/0000:05:00.0/usb5/5-1/5-1.4/5-1.4.4/5-1.4.4:1.0/0003:1532:0007.0003/input/input15
hid-generic 0003:1532:0007.0003: input,hidraw2: USB HID v1.11 Mouse [Razer DeathAdder] on usb-0000:05:00.0-1.4.4/input0
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[drm:radeon_dp_link_train [radeon]] *ERROR* channel eq failed: 5 tries
[drm:radeon_dp_link_train [radeon]] *ERROR* channel eq failed