dmesg - cpu01
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x000000009aabefff] usable
BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 0.7 present.
DMI: Sony Corporation SVS1311B4E/VAIO, BIOS R0140C5 03/30/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09B000000 mask FFF000000 uncachable
3 base 09C000000 mask FFC000000 uncachable
4 base 0FFC00000 mask FFFC00000 write-protect
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask FC0000000 write-back
7 base 240000000 mask FE0000000 write-back
8 base 25F600000 mask FFFE00000 uncachable
9 base 25F800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01af4000, 0x01af4fff] PGTABLE
BRK [0x01af5000, 0x01af5fff] PGTABLE
BRK [0x01af6000, 0x01af6fff] PGTABLE
init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[mem 0x25f400000-0x25f5fffff] page 2M
BRK [0x01af7000, 0x01af7fff] PGTABLE
init_memory_mapping: [mem 0x25c000000-0x25f3fffff]
[mem 0x25c000000-0x25f3fffff] page 2M
init_memory_mapping: [mem 0x200000000-0x25bffffff]
[mem 0x200000000-0x25bffffff] page 2M
BRK [0x01af8000, 0x01af8fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01af9000, 0x01af9fff] PGTABLE
init_memory_mapping: [mem 0x40005000-0x9aabefff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0x9a9fffff] page 2M
[mem 0x9aa00000-0x9aabefff] page 4k
init_memory_mapping: [mem 0x9afff000-0x9affffff]
[mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
RAMDISK: [mem 0x3634e000-0x3719efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony )
ACPI: XSDT 0x000000009AFFE210 0000B4 (v01 Sony VAIO 20120330 01000013)
ACPI: FACP 0x000000009AFFA000 0000F4 (v04 Sony VAIO 20120330 ACPI 00040000)
ACPI: DSDT 0x000000009AFEE000 008041 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: FACS 0x000000009AFBB000 000040
ACPI: FACS 0x000000009AFBB000 000040
ACPI: TCPA 0x000000009AFFD000 000032 (v02 Sony VAIO 20120330 ACPI 00040000)
ACPI: UEFI 0x000000009AFFC000 000236 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: ASF! 0x000000009AFFB000 0000A5 (v32 Sony VAIO 20120330 ACPI 00040000)
ACPI: HPET 0x000000009AFF9000 000038 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: APIC 0x000000009AFF8000 00008C (v02 Sony VAIO 20120330 ACPI 00040000)
ACPI: MCFG 0x000000009AFF7000 00003C (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SLIC 0x000000009AFED000 000176 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: WDAT 0x000000009AFEC000 000224 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SSDT 0x000000009AFEB000 000BC8 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: BOOT 0x000000009AFE9000 000028 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SSDT 0x000000009AFE8000 00032C (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: ASPT 0x000000009AFE3000 000034 (v07 Sony VAIO 20120330 ACPI 00040000)
ACPI: FPDT 0x000000009AFE0000 000044 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SSDT 0x000000009AFDF000 000968 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SSDT 0x000000009AFDE000 000A92 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SSDT 0x000000009AFDA000 0026A5 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: SSDT 0x000000009AFDD000 000346 (v01 Sony VAIO 20120330 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
Initmem setup node 0 [mem 0x00000000-0x25f5fffff]
NODE_DATA [mem 0x25f5f3000-0x25f5f7fff]
[ffffea0000000000-ffffea00085fffff] PMD -> [ffff880256c00000-ffff88025ddfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x25f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0x9aabefff]
node 0: [mem 0x9afff000-0x9affffff]
node 0: [mem 0x100000000-0x25f5fffff]
On node 0 totalpages: 2072155
DMA zone: 56 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 8599 pages used for memmap
DMA32 zone: 628927 pages, LIFO batch:31
Normal zone: 19677 pages used for memmap
Normal zone: 1439232 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9ba00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffcfffff]
PM: Registered nosave memory: [mem 0xffd00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88025f200000 s80896 r8192 d21504 u262144
pcpu-alloc: s80896 r8192 d21504 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043802
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8078680K/8288620K available (5222K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 209940K reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2494.390 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.78 BogoMIPS (lpj=9977560)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21683 entries in 85 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19955.12 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802567C2000 00083B (v01 Sony VAIO 20120330 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88025618E800 000303 (v01 Sony VAIO 20120330 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880256172E00 000119 (v01 Sony VAIO 20120330 INTL 20100121)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb9000000-0xb93fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x7000-0x703f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb9400000-0xb940ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb9414000-0xb941400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xb9419000-0xb94193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb9410000-0xb9413fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb9418000-0xb94183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x7088-0x708f]
pci 0000:00:1f.2: reg 0x14: [io 0x7094-0x7097]
pci 0000:00:1f.2: reg 0x18: [io 0x7080-0x7087]
pci 0000:00:1f.2: reg 0x1c: [io 0x7090-0x7093]
pci 0000:00:1f.2: reg 0x20: [io 0x7060-0x707f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb9417000-0xb94177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb9415000-0xb94150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x7040-0x705f]
pci 0000:01:00.0: [10de:0fd3] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xb9000000-0xb9ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x6000-0x607f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xb8000000-0xb8ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:02:00.0: [8086:088e] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xb8000000-0xb8001fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xb7000000-0xb7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xb7000000-0xb7000fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xb6000000-0xb6ffffff]
pci 0000:00:1c.1: bridge window [mem 0xb3000000-0xb3ffffff 64bit pref]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:04:00.0: reg 0x18: [mem 0xb5004000-0xb5004fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xb5000000-0xb5003fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xb5000000-0xb5ffffff]
pci 0000:00:1c.2: bridge window [mem 0xb4000000-0xb4ffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:01:00.0: can't claim BAR 0 [mem 0xb9000000-0xb9ffffff]: no compatible bridge window
pci 0000:02:00.0: can't claim BAR 0 [mem 0xb8000000-0xb8001fff 64bit]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 0 [mem 0xb7000000-0xb7000fff]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1100-0x110f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] could not be reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0x2000] has been reserved
system 00:00: [io 0x2004] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs SNYa002 PNP0f13 (active)
pnp 00:05: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x20000000-0x201fffff] has been reserved
system 00:07: [mem 0x40004000-0x40004fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 0: assigned [mem 0xb8000000-0xb8ffffff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:01.0: bridge window [mem 0xb8000000-0xb8ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
pci 0000:02:00.0: BAR 0: assigned [mem 0xb7000000-0xb7001fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xb7000000-0xb7ffffff]
pci 0000:00:1c.0: bridge window [mem 0xb2000000-0xb2ffffff 64bit pref]
pci 0000:03:00.0: BAR 0: assigned [mem 0xb6000000-0xb6000fff]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xb6000000-0xb6ffffff]
pci 0000:00:1c.1: bridge window [mem 0xb3000000-0xb3ffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xb5000000-0xb5ffffff]
pci 0000:00:1c.2: bridge window [mem 0xb4000000-0xb4ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:01: resource 1 [mem 0xb8000000-0xb8ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xb7000000-0xb7ffffff]
pci_bus 0000:02: resource 2 [mem 0xb2000000-0xb2ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xb6000000-0xb6ffffff]
pci_bus 0000:03: resource 2 [mem 0xb3000000-0xb3ffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xb5000000-0xb5ffffff]
pci_bus 0000:04: resource 2 [mem 0xb4000000-0xb4ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14660K (ffff88003634e000 - ffff88003719f000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x10
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x10
microcode: Microcode Update Driver: v2.00 , Peter Oruba
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1460810595.936:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15807
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2016-04-16 12:43:16 UTC (1460810596)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
systemd-udevd[73]: starting version 215
random: systemd-udevd urandom read with 3 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
r8169 0000:04:00.0: irq 41 for MSI/MSI-X
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90010c88000, 30:f9:ed:ed:39:1c, XID 0c900800 IRQ 41
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (39 C)
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 23, io mem 0xb9419000
SCSI subsystem initialized
rtsx_pci 0000:03:00.0: irq 42 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xb9418000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x11 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb9417000 port 0xb9417100 irq 44
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xb9417000 port 0xb9417300 irq 44
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
psmouse serio1: synaptics: queried max coordinates: x [..5638], y [..4714]
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: disabling queued TRIM support
ata1.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: supports DRM functions and may not be fully accessible
psmouse serio1: synaptics: queried min coordinates: x [1304..], y [1138..]
ata1.00: disabling queued TRIM support
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2022, fw id: 1117374
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: MATSHITADVD-RAM UJ8A7AS, 1.00, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8A7AS 1.00 PQ: 0 ANSI: 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 sda5 sda6
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 1-1.1: new full-speed USB device number 3 using ehci-pci
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.1: New USB device found, idVendor=08ff, idProduct=168f
usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1.1: Product: Fingerprint Sensor
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
usb 1-1.3: new high-speed USB device number 4 using ehci-pci
tsc: Refined TSC clocksource calibration: 2494.335 MHz
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
fuse init (API version 7.23)
systemd-udevd[202]: starting version 215
mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
ACPI: AC Adapter [ADP1] (off-line)
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140424/utaddress-254)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tpm_tis 00:05: 1.2 TPM (device-id 0xB, rev-id 16)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
[drm] Initialized drm 1.1.0 20060810
EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
wmi: Mapper loaded
input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input5
input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input6
ACPI Warning: SystemIO range 0x0000000000007040-0x000000000000705F conflicts with OpRegion 0x0000000000007040-0x000000000000704F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sony_laptop: brightness ignored, must be controlled by ACPI video driver
sony_laptop: SNC setup done.
snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
input: PC Speaker as /devices/platform/pcspkr/input/input7
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
sound hdaudioC0D0: ALC275: SKU not ready 0x411111f0
sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x18
sound hdaudioC0D0: Internal Mic=0x12
iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
AVX version of gcm_enc/dec engaged.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
i915 0000:00:02.0: irq 48 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[drm] Wrong MCH_SSKPD value: 0x20100406
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
alg: No test for crc32 (crc32-pclmul)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
[drm] GMBUS [i915 gmbus dpd] timed out, falling back to bit banging on pin 6
fbcon: inteldrmfb (fb0) is primary device
tpm_tis 00:05: TPM is disabled/deactivated (0x7)
systemd-journald[195]: Received request to flush runtime journal from PID 1
usb 1-1.3: New USB device found, idVendor=1bcf, idProduct=2c08
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB2.0 Camera
usb 1-1.3: Manufacturer: 93010D100289G2522SB
random: nonblocking pool is initialized
[drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
media: Linux media interface: v0.10
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB2.0 Camera (1bcf:2c08)
input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Switched to clocksource tsc
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input14
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7130a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
r8169 0000:04:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: Radio type=0x2-0x1-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with c6:ea:1d:57:82:21
wlan0: send auth to c6:ea:1d:57:82:21 (try 1/3)
wlan0: authenticated
wlan0: associate with c6:ea:1d:57:82:21 (try 1/3)
wlan0: RX AssocResp from c6:ea:1d:57:82:21 (capab=0x11 status=0 aid=5)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: IT
cfg80211: Regulatory domain changed to country: IT
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by c6:ea:1d:57:82:21
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.07.16.00.03
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
nouveau 0000:01:00.0: irq 49 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: DDR3
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 270-405 MHz memory 810 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 270-570 MHz memory 1800 MHz
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 4047844 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] MM: using COPY for buffer copies
[drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
wlan0: authenticate with c4:ea:1d:57:82:19
wlan0: send auth to c4:ea:1d:57:82:19 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with c4:ea:1d:57:82:19 (try 1/3)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: RX AssocResp from c4:ea:1d:57:82:19 (capab=0x411 status=0 aid=6)
wlan0: associated
wlan0: authenticate with c6:ea:1d:57:82:21
wlan0: send auth to c6:ea:1d:57:82:21 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: authenticated
wlan0: associate with c6:ea:1d:57:82:21 (try 1/3)
wlan0: RX AssocResp from c6:ea:1d:57:82:21 (capab=0x11 status=0 aid=5)
wlan0: associated
cfg80211: Calling CRDA for country: IT
cfg80211: Regulatory domain changed to country: IT
cfg80211: DFS Master region: ETSI
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
wlan0: Limiting TX power to 27 (27 - 0) dBm as advertised by c6:ea:1d:57:82:21
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
wlan0: authenticate with c4:ea:1d:57:82:19
wlan0: send auth to c4:ea:1d:57:82:19 (try 1/3)
cfg80211: Calling CRDA to update world regulatory domain
wlan0: authenticated
wlan0: associate with c4:ea:1d:57:82:19 (try 1/3)
wlan0: RX AssocResp from c4:ea:1d:57:82:19 (capab=0x411 status=0 aid=6)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
wlan0: associated
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)